N80 Firmware Upgrade

Hey, I have had an N80 for nearly a year now, and last night when I was attempting to back up my phone it seems to have gone a bit mad.
Every now and again a Message flashes up saying
MESSAGE: SUPPORT NOT FEATURED
This is when going into Text messages or phone gallery, consequently I am unable to view the messages and the gallery as they will not load.
I would be grateful if you had any ideas on what it could be and what I could do? Could it need a firmware upgrade?

I think it's unlikely that a firmware problem like that would suddenly appear after a year.
I would check the memory card first as it sounds like it could be problems there. Failing that, I would back up the phone and memory card and do a factory reset on the phone (see the pinned thread on the smartphone board for details of how to do this) and a reformat of the card.
If you still have problems, then it's a trip to the service centre, I'm afraid.

Similar Messages

  • N80 firmware upgrades (how?)

    Hello,
    There has been some discussion here about the N80 firmware. My N80 is orange and suffers from a few issues. Firstly the web browser is pretty much useless for me, out of memory errors on almost every page. Relatively frequent out of memory errors in Gallery whilst attempting to play a video taken with the camera. Snakes is not playable it crashes out as soon as you actually try to start the game.
    I'm wondering how firmware upgrades are peformed with a network like orange? I presume Nokia service centres wouldn't do this because of the altered firmware for the network.
    I'm in the UK if it makes a difference.
    Thanks,
    Richard

    Yep, but it's a pain to do as you have to keep backing up on the PC every time you get a new contact.
    Is that an N95 in your pocket or are you just pleased to see me?!?
    Life's too important to take seriously.
    Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
    I'm a 26 year old boy BTW

  • Nokia n80 firmware upgrade problems

    Hi all i just tried to do a firmware upgrade using the nokia sites stuff and my pc crashed and now my fone wont turn on could some1 please tell me
    1 if this is terminal
    2 if i can sort this out myself
    3 point me in the right direction for the info i need to sort out my 3 week fone
    4 how much i should expect to pay if i HAVE to go to a shop to get it sorted
    thanks in advance for any help given

    Right first thing I would try is to connect your mobile to your pc and try running NSU again. If it connects to your N80 great you should be able to just start over.
    (Tips: Run only the NSU on PC close all other programmes down. and ensure your N80 is charged fully or at least plug your charger into the N80 whilst doing the update.)
    If your N80 Isn't recognised by the NSU then its dead and the only way go revive the poor little things is to:
    1: Take is to a Nokia Service Centre. Carphone warehouse is usually your closest NSC, If your lucky they will have an 'on site' techinician and he will fix your N80 within an hour or same day, if not then you will have to leave it with them for a week or so.
    2: Call your Service provider, tell them your N80 just went bye bye and they should swap it for you or at least give you a refurbished N80.
    You won't be charged by the Nokia Service Centre for any work done as your within your warrenty and if you choose to go back to your service provider you should also be covered. This has happened to me and I sent my N80 back to O2 they had a refurbished model sent back to me within a couple of days with no charges.

  • N80 Firmware Upgrade success!!

    I had been waiting for this firmware upgrade for the N80 since this service started. I am glad to say that the upgrade was successfull. I was a little worried because i'm not from the UK, but from South Africa and so doing the upgrade was a bit of a risk, but there was no risk!
    Finally. I'm happy now

    What is your n80 variant?
    Type *#0000# on your phone, whats the number after "NOKIA N80"
    example: (58.01)

  • N80 firmware upgrade: No upgrade available.. not t...

    The nokia software updater for my N80 IE say no update available but it's not true .
    My firmware on N80 IE is v.40707.0.7 28-3-07 rm 92 I need to upgrade to 5.0719.0.2 , but when i try to update them essage says :" Not update available" .
    Where do I post my product code to solve this issue ???
    Thanks to allMessage Edited by thehawk on 23-Sep-200710:59 AM

    25-Sep-200711:25 AM
    prabin wrote:
    Hey Guys!
    To be very frank with you, first of all you have to decide why you are upgrading your firmware in Nokia N80IE?..... Recently I have also upgrade my N80IE with latest version V.5.0719.0.2 (24-05-2007)but I encountered so many problems. And it is like a one way street once you upgrade the version you can downgrade the version again. Therefore... be careful before you change the version.
    Prabin
    I know that the downgrade is not possibile ...
    Read the previous post

  • Nokia n80 firmware upgrade problem

    hi, i have an nokia n80 and i-ve downloaded the pc software for upgrading the phones firmware and when remaining 53 seconds before finish phone went off and it doesnt decets my phone anymore...so i can not continue upgrading...the phone now doesnt event power on :X
    What should i do ?
    the phone has like 1 year since i baught it...if i go to nokia center i must pay to restore my phone ?
    Message Edited by jokerady on 28-Feb-2008 10:03 PM

    Sadly something has gone wrong with the update leaving the phone unusable. You can try a hard reset but remove the sim and memory card first.
    Hard reset:
    1. Switch off the phone.
    2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
    3. While holding these buttons, press the power button and switch on the phone.
    4. Release when the phone shows the nokia logo or shows other signs of life like the language selction screen.
    If this fails the your only option is to get it repaired. If you are in Europe you get a 2 year warranty, not 1 year.

  • N80 firmware upgrade product code

    I HAVE READ YOU BOARD RE PRODUCT CODE VARIANTS. VODAFONE ASSURE ME THAT THEY HAVE PROVIDED NOKIA WITH THEIR VARIANT??
    MY N80 PRODUCT CODE IS 0535066 CAN YOU HELP
    MANY THANKS AGAIN FOR YOUR ASSISTANCE

    13-Oct-2006
    02:59 PM
    fairways wrote:
    I HAVE READ YOU BOARD RE PRODUCT CODE VARIANTS. VODAFONE ASSURE ME THAT THEY HAVE PROVIDED NOKIA WITH THEIR VARIANT??
    MY N80 PRODUCT CODE IS 0535066 CAN YOU HELP
    MANY THANKS AGAIN FOR YOUR ASSISTANCE
    You don't have to SHOUT ... !!! ;-)
    The GENERIC-firmware of the 6630 is updated; this doesn't mean that the Operator-variants, i.e. Vodafone & T-Mobile, updated THEIR firmwares as well . . .
    Nokia Software Uploader looks for the Production-Code of your GSM.
    With NSU, you can NEVER change your Operator-Firmware to the GENERIC Nokia one!
    See this topic:
    http://discussions.europe.nokia.com/discussions/board/message?board.id=swupdate&message.id=451
    Greeeetzzz, Henk.
    RM-159 / Nokia N95-1 (8Gb)
    V 21.0.016 (02.01) / 14-02-08

  • N80 Firmware Upgrade Problems.

    Hi I have just used the Software update utility to update my N80 from V3.x to the latest one v4.x. It now hangs when trying to open menus ie when trying to open the SMS menu or gallery. It has also locked up a few times after hanging up a call. Trying to take a picture worked but it took ages to open the camera application. Can anyone tell me if there is some way to fix this? Cheers

    I got similar hanging problem when I had restored data after upgrading. There are some sis application which does not restore properly. A format will only help here otherwise you have to identify the sis in the memory card and delete it in data transfer mode.

  • N80: Do I need operator specific firmware upgrade?

    Hi,
    I just had a nightmare with my local Nokia service center.
    After ringing last week and being told they had the new N80 v4 firmware, I dropped the phone off yesterday morning to get it upgraded. I won't go into details, but it was so badly mismanaged, I missed a business meeting at 5pm, they told me it would be done on 4 separate occasions and then - they couldn't do it because it was an Orange branded phone.
    Is this the case? Do I have to wait for a specific Orange version of the new N80 firmware? How will this affect the FOTA aspects once Nokia support it?
    Regards
    J>

    If you handset is Network branded then the service point will only install the update that is authorised by the Network. this has always been the case. So it would look like Orange would need authorised that firmware update for their handsets.
    I think it has something to do with braking the warranty you have with your network provider.
    When receive a handset from your network provider, you are agreeing to use that phone with their software installed to get the full service. By debranding it your network can refuse to give you support. I'm my case I lost my handset and got a new one from my insurance. this one was not branded so when I call my network for help with mms/gprs setting they refused on that one detail.
    Now I just stick to Generic handset, a lot les hassle.
    Peace Out
    The Bearded OneMessage Edited by thebeardedone on 31-Aug-2006
    11:28 AM

  • Software (firmware) upgrade for N80??

    Hi, i've noticed you can now update your firmware over the air, found it on the Nokia website:
    http://www.nokia.co.uk/nokia/0,1522,,00.html?orig=/softwareupdate
    However, i have an N80 and was wondering why the N80 is not in the list of selected handsets? How can i update my N80 firmware over the air in this way??
    Any information will be greatly appreciated!
    Thanks

    Andy, there is a separate section here for firmware/software update, hopefully the mods will move this there. I am sure it will come there soonest, we have only seen the start of the service now.

  • N80 Firmware

    Dropped off my N80 at my local service centre earlier on today to upgrade firmware. Got a phone call a couple of hours later from the engineer telling me that there has been 10 updates released for my phone for the version I have(I only got it last friday) but.... the phone will not respond to any update he tries to install. The phone is communicating with his computer but will not install any update. So I've since had to contact o2 to arrange a replacement to be sent to me, which will probably itself need to be taken for a firmware upgrade. Fingers crossed this one will be alright.

    Hi
    Im going to lock this thread, since the N80 firmware is being discused in other threads, and nothing is being said to merit a new thread.
    New N80 Firmware - 4.0623.0.24
    and
    New N80 Firmware
    regards
    Mohjo

  • N80 Firmware changelog?

    Is there a Nokia certified website or source where I can find a history of N80 firmwares and what changes took place in each one?
    A changelog would be absolutely fantastic to help verify that new firmewares really fix observed problems.
    Also, it could be used to check if I have the latest firmware (I know I could just hook my phone up and sync it, but I'd rather have a simpler method since I've seen the Nokia Software Updater program fail on me a lot hence I don't trust it).
    Currently I have an N80 running 4.0707.0.7, updated just yesterday from the previous version.

    Being a computer program and well familiar with embedded systems myself I was afraid the case would be that Nokia doesn't release the details of each firmware update. Honestly, I think that is a form of sort of "corporate programmer cowardice."
    Regardless, you bring up another good point: N80 users certainly should NOT load the new 4.0707.0.7 firmware as it has some severe problems.
    Just to help future searchers get this:
    Nokia N80 4.0707.0.7 firmware is broken and bad, do not upgrade or load this firmware.

  • PETITION: This is what I would like to see in a new firmware upgrade for the MTP ZEN TO

    FIXES:
    -Ensures correct playback on the player of Zencast audio content that has been transferred using Zencast organiser. Remaining time is displayed correctly, and rewind / fast-forward functions can be used
    - Allows users to transfer tracks between folders on the player when using a program such as Creative Mediasource [THIS IS NEEDED FOR ALL MTP PLAYERS]
    - Allows charging via USB when the player is not being used by a program or is low on battery [THIS FEATURE SEEMS TO HAVE BEEN REMOVED BY MTP UPGRADE]
    ENHANCEMENTS / ADDITIONAL FEAUTRES [I HAVE LISTED THESE BY MY PERSONAL ORDER OF PREFERENCE]:
    ) Allows the playback of Audible content types ,2,3,4 on the player, via a plug-in in Audible Manager
    2) Adds bookmarking feature to the player
    3) Adds SmartVolume EQ feature to the player
    4) Adds DJ menu to the player
    5) Allows user to partition a section of the player for data transfer
    6) Allows user to synchronise tasks from Outlook to the player
    7) Allows TXT files/ Ebooks to be stored/ viewed on the player
    8) Adds BassBoost EQ feature to the player
    PLEASE SIGN THIS PETITION TO URGE CREATIVE TO INTRODUCE AT LEAST SOME OF THESE FIXES / FEATURES IN A FIRMWARE UPGRADE FOR THE MTP ZEN TOUCH - also please feel free to add other suggestions that would improve the functionality of the Zen Touch
    Message Edited by joshua32 on <SPAN class=date_text>05-30-2006 <SPAN class=time_text>:7 PM
    Message Edited by joshua32 on 05-30-2006 :8 PM

    all of these would be awesome, as would lyrics support, I REALLY want that

  • Firmware upgrade crippled cp1025nw

    LaserJet CP1025nw color: was working flawlessly
    received email from HP 4/3/2012, recommending firmware upgrade to v 20120130.
    ran upgrade 4/3/2012 from iMac, OS10.6.8.
    got error: 'update failed'
    print queue says 'printing', cp1025nw doesn't respond.
    printer lights:  orange triangle enclosed exclamation mark plus green semicircle 
      This means: fatal error, per the user manual.  
       manual instructs to turn off, unplug, plug-in, turn on.  I did this several times.
    printer lights still indicate: fatal error.
    HP utility says: device status: unknown, service ID: unknown, FW version: unknown, driver version 2.0.20110727
                      tried to print configuration page: got error 'cannot establish two-way communication with the device'
                      printer and computer are connected with USB cable,  (this cable / port communicates without issue to Epson inkjet printer)
    Tried printing from Dell laptop: Latitude E6410 with USB cable: Windows XP professional, 2002, service pack 3.
                      has routinely printed from this computer previously.
    error message in printer queue: 'error - printing', 
    Dell said 'found new hardware'  tried to install with HP cd-rom
                      error message said 'the hardware was not installed because the wizard cannot find the necessary software'
    ran the HP print diagnostic utility HPPDU.exe file from the Dell with USB cable: 'Everything checks out okay with your printer'
     print test page: no response from the cp1025nw
    What should I try next?

    Since my last post I’ve retried the same troubleshooting described before, this time just from the PC.  The result is still the same.  Lights on the cp1025nw indicate “fatal error”.
    Does anyone know how to put this printer into ‘bootcode’ mode?  I’ve read about this in some other posts about HP firmware updates trashing printers.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    and
    http://www.fixyourownprinter.com/forums/laser/63535
    Is there some combination of button presses that sends the printer into bootcode so it is ready to accept the firmware?
    HP:  How do you start up these printers when they are just manufactured to load the firmware?

  • HDMI output not working since firmware upgrade

    I would appreciate troubleshooting tips for getting the HDMI output to work. I just tried it recently for the first time in a long while, approximately 4 weeks after doing the firmware update to 2.2. When I did it before, plugging in the HDMI cable would automatically start output to my HD TV. Now that is no longer the case. Changing the HDMI output from "Auto" to "720p" does not make a difference either.
    Otherwise, everything works well and I've been satisfied with my Creative 7 to date. I have installed several apps so it could be that there is a conflict and nothing related to the firmware upgrade.
    Any troubleshooting suggestions would be appreciated.

    Well I've received my refurbished device for about a week now. The HDMI still doesn't work either with Zii Video or a 3rd party app MoboPlayer. ?I am tempted to reinstall the firmware upgrade again. Is it ok to try this or is it only a one time attempt?
    Perhaps this should be a separate thread but are any of the "Phone 2 SD" apps compatible with the Ziio 7? Whenever I use the "Move to SD card" option, there is still no program moved to the external SD card. ?I have a Ziio 7 with 6 GB of memory as well as a 6GB micro SD card. ?My memory settings are:
    - SD Card: total space - 5.43GB; Available space - 5.43GB
    - Device media storage: Total space - 2.48GB; Available Space - 2.3 GB
    - System storage: Total Space - .97 GB; Available space - .59GB
    In Settings>Applications>Manage Applications, the "On SD Card" tab lists several programs lists several apps but none of them are actually on the external SD card.

Maybe you are looking for

  • I want to print multiple Material no against Purchase Order

    hi i want to display MATNR against Purchase Order suppose 10 Material no is there than i want to display 10 material no against that Purchase order. thanks. laxman sankhla.

  • Source Monitor and Program Monitor dead in Premier Pro?

    I recently installed Premiere Pro CS6 on my laptop so I could use it on location, but both the Source Monitor and the Program monitor are completly dead. The Source Monitor just displays a bright array of colours when you try to play anything, and th

  • G/l account is not appearing in purchase requisition

    Hi Folks, I have created PR via CRM FSO. The PR itself does not have the GL Account in the Account Assignment tab and so the PR does not show as a commitment in KO03 or KOB2.why the pr is not picking the g/l account. please help me out. Regards, Nara

  • R/3 TO BI USING PROXY

    Hi Can anyone help me out giving example client proxy to server proxy scenario. Because i need to send data from R/3 using datasource to BI system. Is any FM/IDOC for datasource in r/3 so that i can import in xi server. please help me out i find scen

  • Where is the authorize computer on itunes?

    i went to itunes store but dont see any where where it says authorize computer