N80 Gallery Bug introduced in firmare 5.0719.0.2

In case you guys from Nokia didnt notice it yet ...
There was a new bug introduced into the Gallery application of the Nokia N80 with Firmware 5.0719.0.2.
The bug looks as following:
If you open the Picture Gallery there simply wont be any pictures or videos shown (from both internal memory and memory card). All one can see are the two weblinks in the gallery.
Only thing that help to bring the Gallery back to normal condition is to reboot the phone.
Several people who have upgraded to 5.0719.0.2 have this problem. And it definitely was not there before in any other Firmware Version 3.x or 4.x.
Is Nokia already aware of this bug and will fix it in a future firmware release? It really annoys me a lot. So much that i already think of buying a new phone from another manufacturer.
Besides ... Why doesnt Nokia release the 5.0725.0.1 firmware for European N80s? Maybe the bug is already corrected in this newer firmware...

Hey
To tell the truth this is one of the most common most annoying and of course older bug from N73, N80, N91.
Later nokia introduced new gallery in N93, N93i and N91 8GB.
I discussed a tip here:/discussions/board/message?board.id=smartphones&message.id=54784&page=1
It would just **bleep** me off.Message Edited by korngear on 04-Oct-200704:31 PM

Similar Messages

Gallery Bug in N80 v5 firmware?

Since i have the new V5 Firmware installed on my N80 it wont randomly display all the images that are on the storage card. All i will see then are the two Links in the gallery. The only solution to this problem is to restart the phone. Then it will display all images again.
I never experienced this problem with the predecessors of the v5 firmware and it really annoys me a lot.
Anybody else having these problems with the v5 n80 gallery?

I have had V5 on my N80 a year or more now and there is definitely no reduction in battery life.
Make sure that things you don't normally use like 3G, bluetooth and wlan scanning is switched off. If this doesn't work then try resetting and failing that, reinstall V5.

N80 Gallery - Is it possible to sort?

Can anyone tell me if it is possible, and, if so, how to sort images in the N80 gallery. I have about 300 photos I have downloaded onto the handset, but they are not in the order I would like them. Is there any way to sort them, or an application out there that I can use for this?
Thanks.

Hi Paul,
Had the same problem. So called up NCL within a week of purchase a few months back. I was told that the gallery can only sort by date.
Am creating a bash script to touch the files so that they can be arranged in the manner I wanted. But I hadn't got the time to work on it. PM me if you're interested, and I'll send you the script once its completed.
Cheers. -_-

[svn] 3149: Fix bugs introduced by the display object sharing optimization.

Revision: 3149
Author: [email protected]
Date: 2008-09-08 16:58:35 -0700 (Mon, 08 Sep 2008)
Log Message:
Fix bugs introduced by the display object sharing optimization. This checkin should fix ordering problems when dynamically adding/removing graphic elements, and ordering problems when changing graphic element properties that require a display object (rotation, alpha, filters, etc).
Bugs:
MXMLG-219: BitmapGraphic component content always rendered from 0, 0 origin.
MXMLG-220: setting visible property of Rect and Ellipse does nothing.
MXMLG-222: setting the alpha of a rectangle changes z-order when there are 3 or more rectangles
SDK-16754: Z-order incorrect when a Group is present
QA: Yes - the test files from these bugs (or something equivalent) should be added to our standard test suite
Reviewer: Deepa
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-219
http://bugs.adobe.com/jira/browse/MXMLG-220
http://bugs.adobe.com/jira/browse/MXMLG-222
http://bugs.adobe.com/jira/browse/SDK-16754
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/BitmapGraphic.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

This is the great thread ;-)
My favorite threads are below.
Munky posted great reply :8}
SQL Query Help
order in a connect by

[svn] 1388: Fixing a bug introduced for DefineFont3 equality testing.

Revision: 1388
Author: [email protected]
Date: 2008-04-24 10:19:44 -0700 (Thu, 24 Apr 2008)
Log Message:
Fixing a bug introduced for DefineFont3 equality testing. DefineFontAlignZones already checks its DefineFont3 for equality and so this goes back to the old behavior and avoid an infinite equality check.
Doc: No
QA: Yes, also please add a test case that makes use of two, duplicated embedded fonts with advanced anti-aliasing to the automated mxunit testsuite.
Bug: SDK-15378
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15378
Modified Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont3.java

I just posted something about this too, and while I feel that its wrong to "bump" an old post, this issue has still stayed unresolved and my frustration is peaking. In my thread my problem is i can't even use the KXdrivers on an x64 operating system, so this things an expensi've paper weight. Great.
Creative makes good sound cards, NO DOUBT about that. Their customer service on the other hand however, is absolute trash. I have read that "statement" as well, and it seems an easy way out to just say "yeah we addressed it, so please, shut up about it already". And I agree, it is NOT a fix, for all of us. If one would take the time to read the forum, its not only ABIT motherboards. Even in that one thread, one if the first couple of replies a guy says "but I have a gigabyte motherboard". Surprise surprise, he was ignored by the mod who posted that (she answered some other poster's question with "read the instructions please" . Please creative, give us some faith back in your company by helping out the many of us with this problem. Only then will I reccomend and buy your products.

H.264 Video Encoding Bug Introduced?

I'm not sure if the issue is related to a fix for a previous bug, or just a new bug introduced for this player.
My original problem was with the reporting of Camera.activityLevel. It only reports 0 and 100 when encoding with H.264 in FP11+ release, Sorenson reports the results properly. I was told it was fixed in this beta, which it does appear to be
See this post: http://forums.adobe.com/message/3999479
However I now see a new problem in this beta. My application allows me to change the video settings on my H.264 encoded stream (quality, resolution, fps, etc) during the broadcast. And it works perfectly in FP11+. However, with the beta it now appears to cause problems and be broken.
Changing settings on an existing stream (it looks to be when changing from 320x240 to 640x480) causes streaks of red, green, and blue vertical lines over the video image and the aspect ratio is wrong. The image appears squished - everything short and fat like mabe it's increaing the width value, but not the height. I'm testing the beta on Windows 32bit IE7 with a Logitech 9000 and on a different machine using Windows 32bit IE8 with a Logitech C910 with the same results.
The camera.width & camera.height properties to seem to report their values properly, but the stream as viewed on the server is definitely not at the correct resolution.
Can anyone verify this or advise? This version looks like it will break my app if released so thankfully it's still a beta.
Thank you!

OK, in FP11 Beta 2 it appears you have fixed this bug (aspect ratio messed up when switching from 320x240 to 640x480), but now you've reintroduced the Camera.activityLevel bug again. It only reports 0 and 100, this was fixed in Beta 1.
To summarize:
FP 11 release
Camera.activityLevel - broken, only reports 0 and 100
Changing camera size from 320x240 to 640x480 - works
FP 11.2 beta 1
Camera.activityLevel - fixed
Changing camera size from 320x240 to 640x480 - broken, turns video from color to black and white and has a strange aspect ratio
FP 11.2 beta 2
Camera.activityLevel - broken, only reports 0 and 100
Changing camera size from 320x240 to 640x480 - works
Hopefully you'll have everything working in beta 3.
Do I need to submit a bug report for the Camera.activityLevel bug in FP 11.2 Beta 2?

[svn] 3780: Fix for bug introduced yesterday when adding clipContent to FxContainer and FxDataContainer .

Revision: 3780
Author: [email protected]
Date: 2008-10-21 10:51:40 -0700 (Tue, 21 Oct 2008)
Log Message:
Fix for bug introduced yesterday when adding clipContent to FxContainer and FxDataContainer. The default value needs to be true.
Also fixing a bug in SystemManager since application isn't always an IRawChildrenContainer anymore. This was previously fixed and got clobbered in a merge.
QE Notes: None
Doc Notes: None
Bugs: SDK-17423, SDK-17697
Reviewer: Hans
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17423
http://bugs.adobe.com/jira/browse/SDK-17697
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxContainer.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxDataContainer.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as

The network admin solved the problem:
“When I recreated the User Profile Service, I did not enable “NetBIOS Name” on the service, so all user accounts did not have the proper domain, which is why none of the targeting worked.
All users were listed as corp\username instead of rcd\username.”, Network Admin.
Further information: http://www.windowsclever.com/sharepoint/netbios-name-is-different-domain-name-user-profie-service-sharepoint-2010.html

Another bug introduced by 6u10 ?

Here is another possible bug introduced by 6u10. Looks like that the feature of setLookAndFeel under 6u10 breaks Mouse Listener.
See the short test program below, which works fine under 6u7 but fails under 6u10.
Here are the test steps :
1.     Click on menu but dont click on any menu items.
2.     Move mouse to the white area (JPanel)
3.     Click mouse once. Nothing happens but it should draw a red dot. The mouse listener does not recognize the first click. The subsequent clicks are fine.
If you perform this test under 6u7, it works fine ( recognize the first mouse click) . If you take out setLookAndFeel, it works fine also. Anyone knows a workaround.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class MouseClickTest extends JFrame
     static int sxw=800;
     static int sxh=800;
     int mx, my;
     JPanel jpl;
     public MouseClickTest()
          init();
     private void init()
          jpl =new JPanel()
               public void paintComponent(Graphics g)
                    Graphics2D g2=(Graphics2D) g;
                    g2.setColor(Color.white);
                    g2.fillRect(0,0,800,800);
                    if ( mx > 0 && my > 0 )
                         g2.setColor(Color.red);
                         g2.fillOval(mx,my, 20,20);
          jpl.setPreferredSize(new Dimension(sxw, sxh));
          jpl.addMouseListener(new MouseAdapter(){
          public void mousePressed(MouseEvent e)
               mx=e.getX();
               my=e.getY();
               jpl.repaint();
          JMenuBar mb = new JMenuBar();
                  JMenu menu = new JMenu("menu");
                  for(int i=0; i<5; i++)
               menu.add(new JMenuItem("Item "+i));
                  mb.add(menu);
          setJMenuBar(mb);
          getContentPane().setLayout(new BorderLayout());
          getContentPane().add(jpl, BorderLayout.CENTER);
          setSize(800,800);
          pack();
          setVisible(true);
           addWindowListener(new WindowAdapter() {
                 public void windowClosing(WindowEvent ev) {
                          System.exit(0);
     public static void main(String[] args)
          try {
               //this is ok.
               //UIManager.setLookAndFeel(UIManager.getCrossPlatformLookAndFeelClassName());
               //these are bad
               //UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
                         UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
               //UIManager.setLookAndFeel("com.sun.java.swing.plaf.nimbus.NimbusLookAndFeel");
              catch (Exception e) {     }
          SwingUtilities.invokeLater(new Runnable()
                   public void run()
                    new MouseClickTest();
}

I can confirm that the behavior is different in 6u10. If a JMenu or JPopupMenu is displayed, and the user clicks on some other part of the GUI to hide the popup, that part of the GUI doesn't actually receive (or react to) a MouseEvent. If you click on an unselected tab, for example, that tab doesn't become the active tab, whereas in 1.5 and 1.4 (and according to the OP, 1.6 pre 6u10), it did.
Is this really a "bug"? I suppose it is. Native Windows appears to send mouse events to items when a popup menu is dismissed with a click. But why does your application rely on this behavior - that is, why is this change so serious to you?
Oh, and XOR painting isn't broken in 6u10, it's just unusably slow. :)

New bug introduced with Keynote 5.2 - Set timing and order of each build has stopped working properly on Smart Builds

Hi there,
We're heavy users of Keynote and have noticed a new bug has recently been introduced into something that was stable. I think it has emerged in Keynote 5.2, could have been Keynote 5.1 also.
It's in the area of Set Timing and Order of each build when used on a Smartbuild. You can no longer set the Start Build field for each instance within the Smart build when the instances are interspersed between other items. The Start build field is just blank and unselectable.
To see this :
1. Create a bullet point list with 4 lines
2. Set build to Appear
3. Set "Set Timing and Order of each Build" to on
4. Create a Smart Build - set to flip
5. On the Smart Build Set "Set Timing and Order of each Build" to on
5. re-order the items in your Build Order so that they alternate between the bullet point and the smart build flip
At this point, you used to be able to set the bullets so that they Started on Click and then set the smart builds to Start with previous. This gave you a nice and very useful effect where you could click to reveal a bullet point and at the same time flip in a corresponding image. We've used this loads of times in our company presentations.
With a recent keynote update ( I think 5.2 maybe, could have been 5.1) this functinality has been lost. have tried it on Lion and Mountain Lion and it's not an OS issue, its a Keynote issue.
Could anyone from Apple acknowledge that they know the issue and suggest if it will get fixed? Right now we're hunting round for an old Keynote 9 DVD so we can install a pre build 5.2 version.
Thanks

Hi glennelliott72,
I've noticed the bug you describe and to me it's very irritating.
I also found some differences in the build menu between the last release and the previous one, and between the Mac OS X and iOS versions. For instance, the blast build doesn't exist anymore in Keynote 5.2 but it's still in the version for iOS 6.
What is your experience about?
I currently use OX Lion.
Thank you

N97 Photo Gallery Bug

Hey all. I've found yet another issue with the N97's software, and I'm looking to see if anybody else has had this come up with theirs as well, if anybody has their N97 anymore.
It seems that for some stupid reason, whether it be from constantly connecting to my computer via USB Mass Memory mode, the photo's that I have taken with the N97 camera stopped showing up in the "Captured" list of photos. I used to have 100+ in that list. Then I had 35, and now I only have 15. All the rest of them are showing up in the "Downloads" photo list.
This of course is in addition to all the other shennanigans that I have to deal with in terms of the photo gallery in general. You know, how photo's don't show up clearly when zoomed in on, or how you'll get kicked out to the homescreen while trying to zoom in sometimes or how the phone will fake like you're going to the homescreen all of a sudden and then bam, it's back to showing you your zoomed into photo.
Just wanted to see if anybody else was experiencing the captured photo's bug.

I FOUND A GOOD SOLUTION BY USING THE NEW VERSION OF NOKIA PHOTO BROWSER ! IT WORKS GREAT AND BETTER THAN THE INCLUDED ONE WHICH HAVING SOME BUGS AND RESLUTION PROBLEMS !

Photoshop CS3 web gallery bugs(?); vanishing metadata, bad sort order

Running OS 1.5.4 on 24" Imac, I'm attempting to generate a "horizontal slideshow" from bridge-selected files in Photoshop CS3.
[Sounded like the problem in this post: http://www.adobeforums.com/webx/.59b5a9fe/2 but on re-reading I've decided it's different so I'm giving it it's own thread, with more detail...]
Here's my experience:
1) Description and title show up for a second on the first slide, then revert to just the blank template on that and all subsequent slides (title: [blank] description: [blank]....
Hitting "refresh" produces the descriptive metadata for a tantalizing moment, then it' s back to the blank template for this and all subsequent slides. It does this both for Safari and Firefox.
You can view this behavior in a slideshow at http://oasisdesign.net/projects/earthtoilet/
If it asks for a password, use---
user:earthling
pass: draf1 )
"preserve all metadata" is checked.
I've tried all combinations of checking/ unchecking "title, description, filename" for labeling...also, making slideshows with just one or two slides to reduce the chance that it's a weird character issue of the type some other folks have experienced...
2) additionally, the web gallery is not respecting the manual sort order in Bridge, which is the source of the files. The help files say the slideshow should follow the manual sort order in Bridge.
3) Finally, metadata entered in bridge metadata tab sometimes vanishes, sometimes metadata entered in file info wouldn't show in the metadata tab.
Thanks for your help!!
Art
BTW, here's the related issues I found:
http://www.adobeforums.com/webx/.59b5a9fe/2
...After some investigation, I found that the descriptions were disappearing only for photos that had a Return / Line Break in the description. If you go back and make sure all of your descriptions are a single line, it works fine....
=Don't have line breaks, nor "and" nor &...
http://www.adobeforums.com/webx/.3bff9de1/0
http://www.adobeforums.com/webx/.3bd62ec3/0

OK...here's the hack I used to get around what I'm now totally convinced are program bugs and shortcomings relative to advertised functionality, for anyone else who has to deal with this, followed by my (suggested fixes to Adobe)...
1) Sort everything the way you want in bridge.
2) Make meta descriptions w/o weird characters (a warning here would be helpful)
3) Use "batch rename," with "copy to another folder" to give the images totally plain vanilla, DOS-style file names (001.jpg, 002.jpg...). This solves most filename issues and the works around web gallery's failure to recognize bridge sort order in one go. Note that you can irrevocably screw up the names of all your original files if you're not very careful to COPY at this step.
([a] make the bridge sort work directly, as advertised, por favor. [b] add an error message or warning about file names such as 006-(2).jpg causing malfunction. A compassionate, low-effort short-term patch for Mac users of web gallery, especially since bridge generates that particular sort name itself invisibly and automatically if you move a file with the same name into a folder)
4) Use "white on black" instead of bug-ridden "horizontal slideshow" (horizontal slideshow should be fixed or deleted from the next version...multiple slideshow options would be awesome, as they advance automatically at the max rate the user's bandwidth allows, a very attractive feature)
5) Restrict all images to the same height so users can click *in the same spot* to advance the 200 images with less carpal tunnel (the advance arrow should *always* be in the same spot, for every web gallery, IMHO)
Web galleries are a fantastic tool for sharing information easily...I hope to see some evolution in those great automatic updates someday...

N80 Gallery

I don't know about every one else, but I like to organize my images in to folders not just have then all over the place.
I know that the N80 has the ability to make albums, but this is not much help when it comes to the gallery.
What would be good is to have the gallery set up in a way that you can create folders and view them in the gallery also not just the images.
One more thing about the N80 is the inability to hide images from the gallery... why would you want every image shown I have wall papers that I don’t want to have to scroll though to find the images I want.
Simply put, why can’t the N80 have a better way to organize the gallery and hide images for the gallery?
Will the rumored firmware V4.XXXXX fix this problem and when will it be released
Not meaning to bag the N80 or Nokia but what are other peoples views on this problem?

there are 2 ways to solve this problem
1.install fexplorer (its a freeware) and create a folder place the images you dont want to be seen in there....it should remove them from view in the gallery....
2. download this app. "BEST CRYPTO" it does the same thing

N80 Gallery 'problems'

Hi!
I have been a 6280 user and have just upgraded to the N80, i have a couple of minor problems and irritations which may be simple to solve but i can't find them.
In the gallery there is the option to look at pictures and videos but i would prefer to look at one or the other and not both at the same time. I would also preferrably like to only browse a folder at a time not all 300 or so pictures.
Finally, is it possible to view the pictures with the phone in 'portrait' mode rather than 'landscape' as they would then be bigger on the screen.
Many thanks,
Engelkott

The Gallery can be used to limit what's shown only by using the Albums feature of the Gallery app (which just alternate views to subsets of the full content).
Unfortunately, not a very practical feature in my opinion. I'd prefer to be able to organize them content to different directories (folders), instead, but the Gallery app designers have taken a differeny route. Maybe they'll come to their senses some day and it gets changed back.

Help me Nokia n80 gallery

hi there,
I have a nokia n80. recently i deleted some files from my phone memory. then i found that my gallery isnt working.
no audio, video, pictures r displayed. i can still access them by other softwares. How can i restore them in gallery?
can any1 help me please.
rajen

14-Sep-200706:09 PM
rajenvyas wrote:
thanks for reply
i had deleted some directory n files from the path c:\data\images\ the _PalbTN directory and files in it. I thought it contained useless thumbnails which are using space. so i deleted them. but now i cant view any files in gallery, even if i copy them on phone or on memory card. Will i have to format the phone (which I m very afraid of)help please.
thanks
rajen
Lol, never ever delete the tumbnail files, that are to show yout the files (and ofcourse related to phone system).
Definitely a mistake.
Anyway, try the trick, if fails, try the hard reset.
(You have to back up the phone memory data like contacts, calender etc by PC Suit).

N80 dialing bug

I've experienced a bug with my N80 since I got it -- after a while (can't tell how long, differs) it refuses do dial. No matter what I try -- select a name from the contact list, dial a number directly, dial someone from the log -- it does nothing, as if I never selected "Call -> Voice call" or pressed the dial button.
I can't really tell what causes this, but I think this happens if I try to dial someone from the contact list that has more than one number. It gives me the list of numbers, I press the dial button, the list disappears, and then the thing described above happens, therefore it's not a hardware problem, the button press is registered by the phone, just nothing happens after it.
The only thing that fixes it is a reboot.
I've updated the firmware three times now, hoping it will go away, but it doesn't, even with this latest version. Even the "factory default" firmware had this problem.
Does anybody have the same problem?
My phone is an N80 Internet Edition RM-92 EMEA (product code: 0542808).

I had this and Nokia sent me a new phone . Although the button works something is wrong with the chipset. Send it back )

N80 Gallery Bug introduced in firmare 5.0719.0.2

Similar Messages

Maybe you are looking for