N80 home network and WWW

I have recently purchased an n80 and I am trying to get the home networking and internet functional through my wirless router. So far I have had little success. I have enabled upnp on my d-link router/modem . I have installed The simple center software on my laptop and uploaded files to share. I have setup an access point on my n80 and I have enabled sharing. The shared folders on the n80 have also been selected to share all files. The simple center software has been allowed to operate through xp's firewall. THe only thing I am not sure about is the port forwarding on the router. I have a trigger port and a public port in the applications gateway section of my router . I have entered the ports listed in the simple centers setting section (1900,49153,49154,49152). I have these numbers in both the trigger port and the public port on the TCP protocol.
Occasionally I can connet to the internet. However when I close the connection down and try to start it up again sometimes it does not work , showing 'unable to perform operation'. The only way to re-establish the connection is to power the router down then backup(reset).
The same goes for the home networking. I had no success a all on the first day of trying. Went to work. When I came back tried it again and it worked perfectlly ?? Now on the third day it is working ocassionally.
Anyone else had simmilar problems ? If so any soultions would be appreciated ! The phone itself seems to be pretty glitcy. And battery life isnt the best either. Apart from that eh !

Forget that - just sussed it out...
I'm using v3.0617.0.6 (03-05-2006) RM-92, Nokia N80 (31.01)
I can't seem to get anything using the browser - I constantly get "Out of memory" errors, even when trying to use GPRS.
It moans something about "packet data" and then bombs out...

Similar Messages

  • I found a wifi network called linksys and it let me connect to the network for a while but now it wont let me. it says that the ipad 2 is unable to connect and we have tried to connect to the home network and it didnt pick up the signal.

    but my laptop will. so my grandson restarted the home network and the ipad 2 still wont pick it up. but my laptop will pick the home network.

    Start here.
    http://www.apple.com/support/ipad/assistant/wifi/
    http://support.apple.com/kb/TS1398

  • I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
    Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
    Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
    The network password will appear in the box.
    Quit Keychain Access.

  • Home Network and printer sharing with XP and Vista

       I have a home network and printer wired on my PC desktop which runs XP.  My Vista laptop has been connected to internet and printer through the home network for past 6 years flawlessly.  However, since October my Vista laptop cannot
    connect to the network printer, but internet has been working fine. 
       I've tried to uninstall/reinstall, update drivers, connect via TCP/IP but printer isn't located by add printer wizard.  When I plug printer directly into laptop via USB it works fine.  I also have tried another xp desktop in the house
    and that cannot locate the printer also.     Help!
    Thanks in advance,
    Medic

    What have you tried so far?
    Have you seen this yet...
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1770.html
    http://docs.info.apple.com/article.html?artnum=25609

  • I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

    I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
    Can anyone please advise what I am doing wrong?

    Hi LowLuster
    Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

  • Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

    Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • I have ipad2, using wifi home network and ios7. Why I cannot play youtube...help!

    I have ipad2, using wifi home network and ios7. Why I cannot play youtube...help!

    You don't download anything at all. The feature is built into the iPhone 4 already. Your carrier has to support the feature and there might be an extra charge to use it.
    You can read about how it works here.
    iOS: Understanding Personal Hotspot - Support - Apple

  • Share iTunes Library on home network and edit from all computers?

    I'd like to share my iTunes library on the 3 Macs on my home network and be able to edit the library (add songs, edit titles, add cover art, etc.) from any of the computers. Is there a way to do this? Thanks!

    We're attempting to work out the same trick on another thread.
    http://discussions.apple.com/message.jspa?messageID=6450437#6450437

  • Connect Fios to Cat5e home network AND Coax connections?

    My Verizon fios system was recently installed.  My home is wired for a Cat5e home network and standard Coax in all rooms.  The fios system is currently connected to the Coax connections and the TVs and Fios router all work fine.  Problem is that I would also like to use the Cat5e connections for devices that access the internet that don't have wireless capability and are not proximate to the Fios router.  Is it possible to connect the ONT to my Cat5e home network so that I can connect other devices directly to the Cat5e outlets, and keep the existing Coax set-up?
    I understand that the standard Fios set-up only allows using either an Ethernet output or the Coax output, but not both.  Any suggestions?
    One option might be to move the router to the basement (where the equipment is located that I want to connect to the Cat5e network), but then the router will likely be too far from the rest of the house to receive the wireless signal.  In that case, is it possible to connect a wireless router in another location (I have a Belkin wireless router).  Or do I need to get another router from Verizon?

    DC_Sox_Fan wrote:
    I just spoke to Verizon Fios Tech Support and they claim that it is NOT possible to use both the Coax and Cat5e connections.  So, for those that have a Cat5e home network, but still want to use th Coax for TV, Verzon says you are out of luck.
    Thats not strickly true but its not bad info either. You cant use both the coax and cat5 at the same time for INTERNET. The coax internet port (moca) is not active at the same time as the ethernet port. However, many systems use the ethernet for internet and coax for TV.
    Depending on how your house is set up this can be accomplished many different ways.
    I would assume that you have some kind of utility closet were all the ethernet cables converge, where you could place the router so that it can connect to all the rooms. Is this correct? If so, is there also a coax connection in there? Again, if so, you could place the verizon router in the closet, connect the coax to the router for the link to verizon and the TV's and then connect the ethernet to the lan for the rest of the house. This would be the simplest way assuming that you have this type of connection available to you. there are many other ways but it would all depend on what you have available to you and how your house wiring is set up
    ====================================================================================
    Error exists between keyboard and chair.

  • Slow WiFi only on home network and only on Mac

    I have a 2010 MacBook Pro and internet downloads and especially viewing any videos (like youtube) are painfully slow at home. Videos basically load for a few minutes, play about 5 seconds of video, then load for a few more minutes. I know it is not the actual computer, b/c if I connect to another network elsewhere everything runs fine and fast. Also, it can't totally be my network since we have a few PC's on the same home network that are significantly faster with downloads. Things that take 20 seconds on my PC's take up to 10 minutes or more on the MacBook. Are there settings somewhere that I have wrong? Thanks, -Amy

    So the RSSI and Transmit look okay (the speed 54 indicates a wireless G router). So your new Mac Book can run on wireless N protocal which is faster, so a thought for the future is an upgrade to a new router (which might solve all your problems). When I experienced much of what you are seeing, eventually I traced this to the WiFi router and got a new Airport express with N capability. I could have tried patching the router (mine was Netgear) but the added speed of the N standard pushed me onto a new router. My work PC's seemed to work okay on my old system and work great on the new Apple router.
    But if you can see the other networks and find channel 6 or 11 completely open I would recommend changing the Linksys router to one of those channels and seeing if anything improves. These channels have no overlap in frequency with each other, but are also the most popular. If these are taken it still would be worth a try. Other interferences such as cordless phones and microwave ovens and the like will also affect G protocol wireless so moving the channel helps skip around them as well.
    Before you make a change I suggest going to www.speedtest.net to verify your current performance. Maybe do this once in awhile for a day or so to get a measure of your current best and worst performance. This is a java applet that sends some packets to a local server and reads some down. It gives you a speedometer interface that gives you a Ping value (time for one packet to go between computers, should be in the 10 to 30 millisecond range) and then an upload speed and download speed. The web site actually keeps track of your speed values by date and time so you can review them as you make changes.
    I would pick the recommended server. They select one near by but not at Comcast. So this test looks at your service between Comcast and the world. Comcast actually has a localized version of this same program www.speedtest.comcast.net, and so it can test your speeds within your own network - basically to Comcast and back. So this tests your line to Comcast.
    Do this testing with your laptop connected by wire to your router (so this tests your speed without the WiFi) and then connecting to the internet via the WiFi. Without the WiFi and directly to Comcast's version of speed test, you should get the speed you are paying for from Comcast. The wired test to the speedtest.net suggested server gives you a more real world speed.
    Once you have these base lines then change wifi channels and see if that helps.

  • IPad3 loses connection to home network and same happens to laptops.

    I purchased the new IPad a week ago. Since then, I often lose connection to home network. Cannot join network unless I power off and on the modem/router. This also hapens every morning. The same is now happening with our  wireless laptops.  Never had any problems all these years until the iPad was introduced to our network. Our Internet provider confirmed that modem/router protocols were set per advice from Apple Support and they did additional tweaking but problem persists. I am thinking of getting a new modem and router but wonder if it is worth it. Has anyone had similar problems where their other devices are having the same connection issues as the iPad? Thanks.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Suggestions for NAS for home network and remote access to clients

    I have a photo studio in my home and will need to get the digital files to my clients roughly once a week. i am currently using dropbox, but was thinking of purchasing a NAS that I could use for this purpose,as well as for my home network needs, mainly itunes and photos of the kid...
    any suggestions for a mac friendly NAS , and how it can be accesed by my client over the internet?
    can a NAS be accessed like a FTP site, using fetch or another FTP client?
    thank for any help.
    -thomas

    Hi Thomas,
    I have had similar considerations and finally chose QNAP 439 Pro II over the many other ones out there (LinkSys, NetGear, Bufallo, etc.). Without going into technical details, the main reason for my choice were easy-of-use, functionalities and scalability:
    http://www.qnap.com/prodetail_feature.asp?pid=148
    It's not the cheapest solution out there, but works great with the Mac, even acts as storage solution for TimeMachine (with latest firm ware). And implementing client access is easy.
    Hope this helps.
    Kind regards,
    Mark

  • Having troubles setting up home networking and cant locate comcast isp # and other related info neccessary to do so

    please forgive my computer illiteracy.. I'm trying to set up home networking to include my laptop, husband's i-pad and our mobile phones if possible. I need my internet options info (isp#, etc) and can't locate them

    Sorry, that topic is beyond the range of Firefox support. Try posting in a "networking" support forum like this: <br />
    http://www.broadbandreports.com/forum/sharing

  • Can i use new TC to connect wirelessly to home network and plug my tv into the time capsule for internet connectivity?

    My new tv needs to plug into an ethernet port for internet connectivity. 
    I'm hoping it can plug into my TC however my TC is wirelessly connected to my current home network... how can i get this to work?
    TC version A1470 (i think, brand new)
    Many thanks.
    Ben

    If the TC is connected to a wireless network provided by another Apple router, then the TC extends the network by default, and the Ethernet ports are enabled on the TC.
    If the TC is connected to a third party network wirelessly, then it must have been setup to "join" the wireless network. When the TC is set up this way, the TC becomes a wireless hard drive and nothing more. The Ethernet ports are not enabled when the TC "joins" a wireless network.
    So, a logical first troubleshooting step would be to confirm "how" the TC is currently set up. To do that.....assuming that you are using a current or recent version of AirPort Utility on your Mac.......
    Open AirPort Utility
    Click on the TC icon, then click Edit in the smaller window
    Click the Wireless tab at the top of the window
    Check the setting for Network Mode and report on that

  • How to setup once an Airport home network and keep it alive?

    Hello!
    I have the following hardware setup:
    1 - A Macmini 2009, Ethernet wired to my router which allows the connection to the internet;
    2 - An HP Deskjet printer, USB connected to the Macmini;
    3 - My wife's laptop PC, WiFi connected to my Mac.
    My Macmini handles the internet connection the traditionnal way (Ethernet and PPoE) and has a static IP on it.
    (Why a Static IP? Because I run my own Webserver.)
    I set up a WiFi Home Network in order to allow my wife sharing both my Internet Connection and the Printer Connection.
    Everything run well: fast and smooth. The PC has Internet and Printer access.
    Problem is:
    After each restart, I must re-create the Airport home network.
    System Preferences-->Airport doesn't memorize the name, parameters and credentials of this network.
    How can I fix this?
    Many thanks in advance for your replies!
    Best regards
    Gerry

    If your router is wireless, you should probably use the laptop to configure it to take care of the network (i.e. have the router distribute the IP addresses). Then you can connect your computer to it via the LAN port on the router. Otherwise, you would have to set up your computer to "share its Internet connection" (via Preferences/Sharing or Preferences/Network not sure). I don't think you need to create a network for this.

Maybe you are looking for