N80 requesting date/time after restart

I posted regarding this issue this morning. If I turn my new N80 off, it asks me for the date and time every time I turn it back on again
I have now worked out that if the handset is on charge when swithed off and back on again it retains the date/time information.
Does this mean that any 'internal' or back-up power supply is faulty/missing? I assume this phone must have one?

12-Oct-2006
10:46 PM
rash wrote:
12-Oct-2006
08:56 AM
robbo wrote:
I have the latest version of the firmware installed. My phone discharged last night and was off for at least an hour or so, I turned it on and.......... the clock and date were still correct.
The longest my phone has been in a discharged state is half a day (since the firmware upgrade this is). After this amount of time I turned it on and........ the clock and date were still correct.
I did reset my phone after carrying out the firmware update. I wonder if this had an influence on this? Even if it didn't this doesn't seem to be a straight forward problem with the firmware.
I'm having the same problem. However only when I take out my battery.
Also when it says battery empty it's actually not empty! I inserted my 'empty' battery into a Nokia 3220 (same battery) and it powered but only for a few seconds, so despite you saying it was empty in fact it was not, probably had enough power to keep date/time.
But this is a problem and it's only happened since I updated my firmware.
Fair enough. However, I can also remove my battery and I still don't lose the date and time on my N80. It can't just be the firmware upgrade that has caused this, there could be another issue.
What that is I don't know.

Similar Messages

  • When i hold down command and r at the same time after restarting it comes up with a

    When i hold down command and r at the same time after restarting it comes up with a black screen and a lock symbol and a field bellow where you would input a password, i have tried ALL of my possible passwords including my password i use for the mac and it stil will not work! all that happens is the text i put in bellow erases itself after hiting enter or clicking the arrow.

    I've tried my apple ID password and that doesn't work either . I don't recall seting a password for an encrypted disk either :/ if it was for an encrypted disk, would it be in keychain anywhere? if so how can i find it?
    Thanks!

  • Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips. Later it stops rendering on every restart and the machine was normal and faster. Now it keeps crushing on every restart

    My Final Cut X changed behaviour after conneting the external monitor via HDMI. Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips after every restart. Later the dual screen icon disapeared on the top of my screen and it stops rendering on every restart like before and the machine was normal and faster. Now Final Cut won't start anymore whenever I start it loads and crushes immediately on every restart.

    Upgrade FCPX

  • Loses date and time after restart

    It seems as if my MacBook has gotten a bit more sluggish and so I rebooted it. After the reboot the date/time went back to the year 2000. This is not normal. I am not sure if I have a hardware issue or a software issue. I have 2GB's of RAM which is not great, but should be enough for SL. The Mac gets sluggish when more apps are open which is expected with only 2GB's of RAM. But I just wonder if I am having a motherboard issue like I did the last time I had these slowness symptoms on my then Ibook G4.
    John

    Mine just did the same thing. I did a complete shutdown and when I restarted, I had the wrong date and time plus the system had lost my WIFI network password.

  • Huge problems with network accounts. They keep disapear all the time, after restart they are back. But only for 1h or less. Anyone have any suggestions?

    I`m using Open Directory, its been working fine for 2 months. But now all of a sudden this very annoying error keeps repeating itself.
    It started happen about a week ago,and after a reboot of the server it was working fine, until now. Now the accounts is gone after 1h or so uptime, and after restart all accounts is there, but soon to be disapeared again. Anyone have any suggestion what to look for? And why did it happen in the first place?
    For now theres only one user at the office so he uses my admin account (Local user on the server) to connect to shares etc. But in less then a week there will be much more people at the office, so i will need to sort this out ASAP. Appriciate any suggestions/help. thanks in advance.

    Open Directory; Password Service Server Log:
    (A little shortend, nothing seems wrong there?)
    Jul 30 2013 09:51:18 456163us    Mac OS X Password Service version 387.2 (pid = 139) was started at: Tue Jul 30 09:51:18 2013
    Jul 30 2013 09:51:18 873014us    RunAppThread Created
    Jul 30 2013 09:51:18 873099us    RunAppThread Started
    Jul 30 2013 09:51:18 873122us    Initializing Server Globals ...
    Jul 30 2013 09:51:19 820305us    Initializing Networking ...
    Jul 30 2013 09:51:19 820361us    Initializing TCP ...
    Jul 30 2013 09:51:39 735055us    SASL is using realm "server.xxxx.no"
    Jul 30 2013 09:51:39 735100us    Starting Central Thread ...
    Jul 30 2013 09:51:39 735109us    Starting other server processes ...
    Jul 30 2013 09:51:39 735117us    StartCentralThreads: 1 threads to stop
    Jul 30 2013 09:51:39 735152us    Initializing TCP ...
    Jul 30 2013 09:51:39 735186us    Starting TCP/IP Listener on ethernet interface, port 106
    Jul 30 2013 09:51:39 735242us    Starting TCP/IP Listener on ethernet interface, port 3659
    Jul 30 2013 09:51:39 735265us    Starting TCP/IP Listener on interface lo0, port 106
    Jul 30 2013 09:51:39 735290us    Starting TCP/IP Listener on interface lo0, port 3659
    Jul 30 2013 09:51:39 735318us    StartCentralThreads: Created 4 TCP/IP Connection Listeners
    Jul 30 2013 09:51:39 735329us    Starting UNIX domain socket listener /var/run/passwordserver
    Jul 30 2013 09:51:39 736296us    Finished starting other server processes ...
    Jul 30 2013 09:51:39 736313us    -- Password Server successfully started --
    Jul 30 2013 09:51:39 736321us    -- Start time: 21 sec, 287 msec --
    Jul 30 2013 09:52:19 502436us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxx.no$}.
    Jul 30 2013 09:52:19 516404us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxx.no$}.
    Jul 30 2013 09:52:19 865774us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
    Jul 30 2013 09:52:19 870922us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
    Jul 30 2013 09:52:19 879988us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
    Jul 30 2013 09:52:19 892772us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxo.no$}.
    Jul 30 2013 09:52:22 897368us    GETPOLICY: user {0xfc35f9dcb0b711e28baca820661e5a32, geir}.
    Jul 30 2013 09:52:22 904252us    GETPOLICY: user {0x9ae96942a73011e2aac5a8206623cd3d, christoffer}.
    Jul 30 2013 09:52:22 916530us    GETPOLICY: user {0x523107c8ae7911e28baca820661e5a32, anst}.
    Jul 30 2013 09:52:22 964934us    GETPOLICY: user {0x5841b68eb09611e28baca820661e5a32, fres}.
    Jul 30 2013 09:52:23 12619us    GETPOLICY: user {0x148c7f5c916811e28cd3a8206623cd3d, admin}.

  • Apps opening first time after restart crash but reopens ok

    Applications (Mail, Archive Utility, TextEdit and many misc ones) opening for the first time after a restart crash but then re-open ok.
    This repeats again after a restart.
    They all open ok on the second try.
    The same applications can open ok the first time after a restart but different ones then crash but open ok after a second try.
    I have not tried another account yet.
    Any ideas appreciated.
    Thanks ... Ken

    Thanks for the response.
    Start apps mostly from Overflow.
    Trashing Overflow prefs and Finder prefs did not help.
    Also Archive Utility SOMETIMES quits first time:
    /System/Library/CoreServices/Archive Utility.app
    Next time I will check the Console and post the contents.
    Thanks ... Ken

  • Windows Server 2008 sp2 Task Scheduler missing next run time after restart

    Hi,
    I have the issue that there does not appear to be a fix for with a server 2008 sp2 (NOT R2) where after a restart all tasks are missing the next run time so I need to edit each task to add this time back in. I have tried  the hotfix in KB 950035
    but this when you run it is only for Vista and cannot be installed despite saying it's also for Server 2008.
    For some reason also this is Task Scheduler version 1 not 2 which I thought came with windows since Vista so SP2 should have it.
    Anyone got any ideas?
    Thanks,

    Hi Evans,
    Would you please let us know current situation of this issue?
    As Dave mentioned, Windows Server 2008 Service Pack 2 include all the previously released updates for Windows
    Server 2008.
    Based on your description, I understand that all scheduled tasks still miss the next run time on your Windows
    Server SP2 when the server restart. If anything I misunderstand, please don’t hesitate to let me know.
    On current situation, please open Properties of one problematic scheduled task, navigate to History tab, then
    check if find some relevant events or errors. Those may help us to go further analyze.
    If any update, please feel free to let us know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • URGENT :All data lost after restart

    Hi all,
    I did a restart after using win7 in bootcamp.
    after the restart, all my personal user data are gone. my desktop got wipe out clean with only Macintosh HD drive and bootcamp on it. my dock, trackpad, wallpaper change to default setting.
    i did a check on my applications and all the applications are still intact. however, when i open my safari, all the history is there, but there is no recent download item, all gone! There seems to be no users data in any of the applications. and although all my applications are still there, other folders located in desktop, roots, and other locations are gone.
    My email, outlook email, documents and download are also gone. And i dont have any backup.
    Can somebody help me? Can i recover all my data back?

    Yes you can, but your going to need to stop using the computer before your deleted files are overwritten with new data.
    There is a piece of software called DataRescue ($99) what it can do if installed on another Mac or bootable hard drive is to read the 1's and 0's of deleted data and recover everything to another blank hard drive.
    Then all you have to do is pick through it and save what you want.
    You need to learn either one or two things
    1: How to install OS X onto a external drive and option key boot from it
    2: Firewire Target Disk Mode from another Mac. (T boot the sick Mac)
    I don't know what you want to do a this point but you need to stop using the computer that the files got overwritten on immediatly.
    Bascially you can't be running OS X on the drive/partition your having problems with nor the Windows partition which has access to the OS X partition.
    If you think you can't handle this, then hire the services of a local PC/Mac specialist trained in data recovery.

  • How do I eliminate Blocked Plug-in on my Macbook Pro? I've tried reinstalling Flash Player several times after restarting computer.

    Can't get rid of Blocked-Plug-ins

    Backup your computer. You may have to replace the HD.
    Try repairing  disk.
    Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836

  • Oracle 10g ok but after restart can't login.

    to all friends
    i am using RHLE 4 ( AS)
    successfully i installed oracle 10g configured working properly(user as oracle)
    i can login to oracle through http://localhost.localdomain:1158/em
    successfully i login through mozilla.i created table i can insert data
    and i can list it. no problem working properly
    but after i restrat i can't login. i got one alert message
    the connection was refused when attempting to contact localhost.localdomain:1158/em
    pls how i can login ?
    also from where i get the option sqlplus.
    in terminal sqlplus is not getting( from where i get sqlplus>
    option like 8i,9i or 10g in windows)
    awaiting your valuable advise
    sadique

    please anybody can tell me how i can configure the following
    for a startup ( I AM USING ORA10G , RHEL 4 AS)
    i successfully finished installation oracle first time i can login
    http:/localhost.localdomain:1158/em ( login successfully,crate table,insert data
    but after restart i can not get log in)
    pls anybody can x plain me how i can configure the following
    for startup
    oracle listener
    enterprise manager
    isqlplus
    ur quick response will be highly appreciated

  • Capture Date/Time - clobbered by LR 1.1

    Oh No!
    It appears that LR 1.1 has clobbered the Capture Date/Time after writing out the metadata.
    To try to be clearer, I've been using Elements 5.0 which organizes my photos (all jpg) by date. The date the photo was taken (which is also the date the file was created) are important to me. Those fields are respected by other Adobe products (Album, Elements 5.0 and Bridge CS2). Somehow LR 1.1 treats this date differently and with less importance than other Adobe and non-Adobe applications.
    I am not too concerned about the date that the metadata was changed, which LR shows. I want to see the date the picture was taken.
    The only way I managed to see that in LR was to customize the display using
    Jeffrey's Lightroom Metadata Viewer Preset Builder (for Lightroom 1.1). (Why I had to use a 3rd party add template creator to see the Capture Date/Time I don't know - it should be right there in LR - but leave that aside for the moment) .
    Anyhow, I manipulate the metadata by adding keywords and then tell LR to write that to the files. In this process the creation date/time vanished on a number of photos. The only way I could get it back was to use a backup of the original files (losing keywords and other data in the process)or to use Exifier to set the date/time, remove the collection from LR and reimport.
    Something as important as the date and time the photo was taken (file creation) is a key bit of data that should be readily available and visible in the metadata display and should not be clobbered or lost when writing out metadata to the files. I see there are other complaints about this and some expressing horror that Adobe didn't fix it in LR 1.1.
    My point is simple - for my purposes I cannot fully utilize LR 1.1 if the Creation Date/Time cannot be readily seen, or is in danger of being lost, I would have to use other software.
    Geeze, and I was beginning to get comfortable with LR...
    Maybe the good folks at Adobe have some comment and might be able to rectify this?
    In the alternative, is there something I'm missing about the way Capture Date/Time is supposed to be treated by LR users?
    Advice and pointers would be appreciated.

    Christopher wrote:
    "I hear ya, but if someone could just say, this is how dates are supposed to work ... that would be helpful. In particular, what fields or fields does the Metadata Browser use to sort an image into a date bin? If I knew that, I might be able to determine why so many of my images are put into the Unknown Date heading."
    Here we go:
    1. None DateTime tag defined in exif (or DateTime tags corrupted)
    -in Metadata Browser (left panel) Date will be seen as Unknown Date.
    -Thumbnail show no DateTime value,
    -in Matadata (right) panel, there will be no DateTime caption visible
    2. Only ModifyDate defined in exif
    -in Matadata Browser value of ModifyDate will be shown,
    -Thumbnail show no DateTime value,
    -in Matadata panel, ModifyDate will be shown as Time
    3. Only CreateDate defined in exif
    -in Metadata Browser value of CreateDate will be shown,
    -Thumbnail show no DateTime value,
    -in Metadata panel, CreateDate will be shown as DateTimeDigitized
    4. Only DateTimeOriginal defined in exif
    -in Metadata Browser value of DateTimeOriginal will be shown,
    -Thumbnail shows value of DateTimeOriginal,
    -in Metadata panel, DateTimeOriginal will be shown as Capture Time
    +in Medatada panel, DateTimeOriginal will be shown as Time
    5. All three DateTime values defined in exif
    -in Metadata Browser value of DateTimeOriginal will be shown,
    -Thumbnail shows value of DateTimeOriginal,
    -Metadata panel shows CreateDate as DateTimeDigitized,
    +Metadata panel shows DateTimeOriginal as CaptureTime,
    +Metadata panel shows ModifyDate as Time
    That's it. Now... why are we confused in LR when speaking of DateTime?
    In Metadata Browser any of exif's DateTime value can be shown. That is, looking at this panel only, we never know what Date is being used! Anyway, DateTimeOriginal has priority: if DateTimeOriginal exist, it will be used for Metadata Browser -otherwise any other existing exif DateTime tag will be used.
    But if only DateTimeOriginal is missing (so both, CreateDate and ModifyDate exist), then CreateDate has priority over ModifyDate: CreateDate will be shown.
    Priority in short: DateTimeOriginal, CreateDate, ModifyDate.
    Thumbnails: only if DateTimeOriginal exists, thumbnail will contain DateTime value -otherwise thumbnail's DateTime will be blank.
    Sorting of thumbnails per CaptureTime (hence by exif DateTimeOriginal) is another story and can be quite confusing at first sight... because DateTime priorities seems to be the same as for Metadata Browser:
    If exif DateTimeOriginal exist (=CaptureTime in LR), then this value will be used for sorting. But if this value is missing, LR will try to use exif CreateDate and if this is missing too, ModifyDate will be used. OK, there's some logic... except, why I'm repeating "if this tag is missing..."?
    Because when you modify/rewrite some image, then some tool may damage DateTime in exif -remember: damaged DateTime tag is the same as tag doesn't exist!
    In short: if there's exif DateTime corruption involved, you can't be sure which of three DateTime tags is being used for sorting. For some images DateTimeOriginal will be used, for those that are missing that tag, CreateDate will be used instead.
    Images missing exif DateTime tags (or these are corrupted), will be shown as first (sort A-Z).
    Bogdan

  • Photoshop cs5 error 52 after restart computer

    Every time after restart my computer (mac book pro 2011) and start PS CS5 (12.04x64) i see error...so I need to delete photoshop preferences and it goes OK, until i restart my computer again.
    here is from pserrorlog.txt
    2011:07:08 16:24:06 : /Volumes/workarea/PS_12_Mac_Daily_Retail/20110407.r.1265/photoshop/main/photoshop/xcode/. ./sources/PSOWLListenerProxyBaseCocoa.mm : 52 : REQUIRE failed
    Can you help me to stop this errors?)

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • How to get sqlplus to print the current date/time

    From a unix command line I can type:
    prompt> date; <any_Cmd>; date
    This will result in a timestamp being output before and after the command you inserted. Is there a way to make sqlplus print the current date/time after it is done executing an sql statment. This would be useful for me to know how long it took to execute and sql statement without watching it.
    Something like:
    SQL> select * from table; date;

    u cld set the following statements in sql*plus :
    sql>set time on
    sql>set timing on
    hope this solves ur problem.

  • Date & Time freezes when loading

    I have been trying to adjust my settings for Date & Time after just updating to v.10.4.11 of Tiger. When I open Date & Time however, whether from the clock in the menu bar or from System Preferences, the Date & Time screen opens with a heading "Loading Date & Time" but soon thereafter, before I've done anything, I get the spinning beachball, the application stops responding, and I have to force a quit. I also notice that the lock icon in the lower-left corner of the screen (to click to permit changes) is not appearing.
    Has anyone encountered this and better yet solved it?

    hmmm... i've been a wimp, and i feared that removing the com.apple.systempreferences.plist might mess up with other preferences than just Date&Time -- i don't feel like configuring everything anew right now :-\. so what will my mac look like if i trash the syspref file?
    i've tried removing only the com.apple.MenuBarClock.plist, and that didn't solve anything, the control panel is still freezing

  • Lumia 800 Date And Time Incorrect After Restart

    I purchased a Lumia 800 in the UK in December 2012 (SIM FREE) and I have a problem when I switch it on where it resets the date to anything like 1980 or 2084(?) and the time to a random setting. I have looked for a solution but cannot find one that works. Will this issue be fixed with the Windows Phone 7.8 update that's coming? When the date is wildly out it affects the functionality of the phone i.e. sync issues. I have tried restarting a Lumia 610 and this problem does not occur. Are all Lumia 800s the same i.e. (hardware revision)? I thought that if I returned to the retailer a new version my fix the issue.

    I'm facing the same issue with my Lumia 800, or rather was. Here's my situation: initially the handset would keep resetting the date to 1980 (and a random time) each time I switched it off and on again. This happened whether I was connected to wifi/mobile data or not. I've recently done a reset of the handset (using the option from within Settings) and this has partially resolved the issue.
    Now if I'm connected to wifi/data when I switch the phone off/on the date resets to August 2013. If, however, I'm not connected to wifi/mobile data when I switch the phone off/on the date/time remain unaffected. So this would suggest that it's not an internal battery issue which is what I first suspected. As it stands now then the best option is to reset the handset and then ensure you turn off wifi and data/internet before switching the handset off/on. Still annoying to say the least, but partial workaround.
    Furthermore there is no automatic date/time setting to toggle on/off under the date/time settings (removed by the last update I gather?), just an option to toggle between 12hr or 24hr clock. My handset is on the latest OS version and firmware.
    Any idea if Nokia/Windows are working on this issue? Just doing a Google serach for this issue and it appears that a fair few other Lumia 800 users are facing the same problem.
    Thanks.

Maybe you are looking for