N80 Restarting "WSOD" when playing large mp4 files

I love Anime's so I'm converting my "RMVB" or "AVI" video files from my pc to "MP4" so that i can watch in my N80.
here is the setting when i convert the files to MP4:
Video
-resolution is "352x288 (CIF)"
-frame rate(FPS) is set to "auto"
-Bit rate is set to "512"
Audio
-im just setting it to "mono" and "128kbps"
file size: is almost 110mb
there are two situation that i observed before the WSOD is happening:
1st situation:
when i try to play the mp4 file using "imaging folder---> realplayer".
2nd situation:
when i try to play the mp4 file using "gallery--> images and videos".
both situation makes my n80 restart A.K.A "WSOD" but the difference is it is restarting more often when im using the 1st situation that i couldnt enjoy what im watching.
In the 2nd situation i can play up to two 30 mins MP4 videos and then on the 3rd video usually WSOD will appear.
can someone tell me why this is happening? And this is only happening when im watching Video. Is this a firmware bug? pls help
By the way i have the latest firmware for my n80IE
V5.0719.0.2
24-05-2007
RM-92
Nokia N80(12)
thanks in advance

hi scoobyman
actually i already read that thread, and my settings are correct except for the "bitrate"... he said that the maximum recommended bitrate is "350 kbps"
my setting for bitrate is "512kbps"
i think that 512kbps is still ok in n80, because when i try to look at the properties of the "recorded video" of my n80. here are the properties:
(ORIGINAL PROPERTIES OF RECORDED VIDEO ON N80)
video
-Bitrate is 574kbps
-format mpeg4
-size/resolution 352x288
-frame rate is 15 fps
sound
-format mpeg4aac
-bitrate 0kbps
-sample rate is 16000hz
-channel is mono
as you can see, the recorded video file of n80 has bitrate of 574kbps
here is my setting when im converting my PC file for my n80:
(MY SETTING IN CONVERTING FILES TO MP4)
video
-Bitrate is 512kbps
-format mpeg4
-size/resolution 352x288
-frame rate is 15 automatic
sound
-format mpeg4aac
-bitrate 128kbps
-sample rate is 44100hz
-channel is mono
i dont exactly know if theres a problem in my sound setting but i think the video
settings are correct. and also according to el_loco
"Audio: NB-AMR, WB-AMR or MPEG4 audio in mono or stereo, up to 128 kbps @ 44.1 KHz.
Sample rate."
that makes my sound setting also correct.
i dont really know why this is happening, im suspecting 3 things here:
-a bug in firmware
-version of realplayer
-or the converted file itself
if its the converted file can you please recommend a good video converter for nokia.
thanks =)Message Edited by wicked on 05-Jul-200703:22 PM
Message Edited by wicked on 05-Jul-200703:23 PM

Similar Messages

N80 Restarting A.K.A. "WSOD" when playing large mp...

I love Anime's so I'm converting my "RMVB" or "AVI" video files from my pc to "MP4" so that i can watch in my N80.
here is the setting when i convert the files to MP4:
Video
-resolution is "352x288 (CIF)"
-frame rate(FPS) is set to "auto"
-Bit rate is set to "512"
Audio
-im just setting it to "mono" and "128kbps"
file size: is almost 110mb
there are two situation that i observed before the WSOD is happening:
1st situation:
when i try to play the mp4 file using "imaging folder---> realplayer".
2nd situation:
when i try to play the mp4 file using "gallery--> images and videos".
both situation makes my n80 restart A.K.A "WSOD" but the difference is it is restarting more often when im using the 1st situation that i couldnt enjoy what im watching.
In the 2nd situation i can play up to two 30 mins MP4 videos and then on the 3rd video usually WSOD will appear.
can someone tell me why this is happening? And this is only happening when im watching Video. Is this a firmware bug? pls help thanks.

yeah white screen of death... im thinking of that too. im suspecting 3 things why this is happening
-the firmware
-version of realplayer
-or the converted file itself
if it's the converted file, can you please recommend a video converter that will convert a file that is compatible with nokia n80/n80ie... im using "xilisoft video converter" right now, maybe not recommended for nokia files. theres a lot of automatic setting their for lots of device but there's none for nokia.
and also, is their somebody also experiencing this? i already read many threads here but did not find anything the same like this. thanks :-)

How can I turn subtitles on & off when playing an MP4 file?

I bought an iPad Air two days ago and I am a total newcomer to the Apple community. Some of my Blu-ray and DVD collection has been ripped to MKV files and I have used Handbrake on my PC to create iPad-optimised MP4 conversions of some of these files. On one of these conversions I included an English subtitle track set as the default. On another, I also included an English subtitle track but did not click the Default option in Handbrake.
Both these MP4 files have now been transferred to my iPad via iTunes. I can play these videos but I cannot find a way to suppress the default subtitles in one case or turn on the non-default subtitles in the other case. I have tried both the standard iPad 'Videos' app and the latest iPad version of VLC but cannot find an on/off switch for subtitles in either app. Am I missing something or do I need a different app?
BTW, I was surprised to find that loading an MP4 file into my iPad's 'Films' library made it visible to the Videos app but not to VLC. A second copy of each video had to be transferred to the iPad specifically for the use of VLC, which seems like a pointless waste of the limited space on my 64GB iPad. Is this normal or have I misunderstood something?
David

I think I figured it out.
Thanks anyway. p

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?
A little background info. I use Captivate 7 and currently have over 100 projects that I maintain on a quarterly basis. I publish using the SWF format and upload the swf/htm files to a server where they are then accessed from a few locations (within our online documentation, in our software product, on two different websites). Many of the projects are linked so some will be viewed as a series and others viewed as a standalone video. Each video uses the same template and includes an intro and end slide. Now my organization wants to implement a new intro to all videos (those I publish and those from several groups across the organization). My current intros provide overview material for the specific video so the new intro, which is an animation with audio in mp4 format, would need to be placed at the start of each project. The issue is, the intro adds 9 seconds to every video and in many cases doesn’t add any value (say, if a user accesses the video from within our product or views the videos as a series). I’ve talked it over with my boss and we want to try to add the intro only to videos accessed from site X, not any other location. So now to my question. Is there a way to play an external mp4 file (intro) only when the published project is accessed from a specific site, therefore eliminating the need to update each project? Maybe there's a way to add a parameter or variable to the URL or the html code?
Thanks in advance for your suggestions. Please let me know if you need additional information.

AimeeLove,
I have a solution for you. You may have to modify the code a little bit based on how long the timeline animation is for your clock. I based mine on 3 seconds to complete a minute hand sweep around the clock.
Milliseconds for each point on the clock:
12 = 0
1 = 250
2 = 500
3 = 750
4 = 1000
5 = 1250
6 = 1500
7 = 1750
8 = 2000
9 = 2250
10 = 2500
11 = 2750
In the mouseover section for 12 o' clock, put this code...
myVar = setInterval(function(){
     var pos = sym.getPosition();
     if (pos > 0 && pos < 50){
          sym.stop(0);
          clearInterval(myVar);
},10);
When you point to the time, the setInterval method loops every 100th of a second and checks the current position of the timeline. When the timeline reaches the range between 0 and 50 milliseconds (almost impossible to hit 1 specific point), the timeline will stop at 0. Also, the clearInterval will be fired to stop the loop.
In the mouseout section, put this...
sym.play();
clearInterval(myVar);
It start the clock again, and it also clears the loop in case you mouseout before you reach the range.
Make sure that myVar is a global variable so you can clear it from the mouseout section.
Repeat this for each point on the clock. To avoid potential conflicts, you may want to use my12, my1, my2, etc. instead of myVar. I put the milliseconds at the top that you would use as the beginning of the range. 50 milliseconds should be enough to catch it. So, for 5 o' clock, you would make your range between 1250 and 1300.
Let me know if you have any questions. Thanks!
Fred

How Can I Stitch Together Two Large mp4 Files?

I have two very large mp4 files (close to 1 GB each) and I need to join them together into one mp4 file. Is there a free program that will allow me to do that? I tried using iMovie but there wasn't enough room on my hard drive to create an iMovie project for it.

MPEG Streamclip in batch mode will allow you to do this for free. Just make sure they are named in order , e.g. A.avi, b.avi - drag to the batch list and select join files. You will have to reencode them to something like H264 to do this. Which is probably a good idea anyway vs. whatever mystery AVI codec is in use.
If they play in QT and you already have QT Pro, just open both, set the pointer on A to the end of the clip. Then for B select all (CMD+A), copy (CMD+C), then click on the player for A and do paste (CMD+V). "Save as" (new filename) will make a new MOV file without reencoding them.
The SimplemovieX author is supposed to say more than he is the author but that he gets compensation for his recommendations. Since he expects you to buy his software. Don't bother.

Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files

I dowlnloaded Premiere Elements 4, and when I import mp4 files, the video plays but the audio will not. I've also tried to import .mov files, and an error message pops up that says "Codec missing or unavailable." I downloaded the latest version of Quicktime, but that didn't change anything. The files will play back on the video camera, but I"m having trouble with them on my computer. The audio on the mp4 files plays in Quicktime, but not the video, and vice versa when I import them into Elements. Any suggestions?

Does Quicktime Pro also edit .mov files on a PC?
Date: Wed, 27 Nov 2013 07:53:14 -0800
From: [email protected]
To: [email protected]
Subject: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    Re: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    created by Steve Grisetti in Premiere Elements - View the full discussion
Premiere Elements 4 pretty much works with tape-based digital video. That would be video from a miniDV or HDV tape-based camcorder. It doesn't handle other formats very well.
If you plan to edit MP4s, you definitely want to upgrade to a more current version of the program. If you can't install a current version of the program, you may need to address issues on your computer (such as an outdated operating system or underpowered hardware configuration).
Short of that, you could buy Quicktime Pro from Apple for $29. It will edit MP4s, even on a PC platform.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5879880#5879880
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5879880#5879880
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5879880#5879880. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Playing an mp4 file from my iPad on to a TV screen.

I am playing an mp4 file from my ipad 2 on to a TV screen. I would like to see the video on both the TV screen and my ipad. Currently the video can only be seen on the TV screen.
I am using an HDMI cable with an adapter to connect the ipad to the TV screen.
Thanks
Dave

OK, I can get the video to play, but I have no ability to scroll thru the movie.

Message by mpv and ffplay when playing certain flac files

When playing certain flac files with mpv or ffplay, I experience colored messages which might be warnings or errors in the terminal. I don't hear that something is wrong with the audio and therefore I ignored it for a long time. But I'm a bit curious why this message occures because the files are converted from CDs with the flac tool itself. The output I am talking about looks like this (in orange) when playing with mpv:
[ffmpeg] NULL: sample/frame number mismatch in adjacent frames
And it looks like this when playing with ffplay (in cyan and orange):
[flac @ 0x7f73e0001760] sample/frame number mismatch in adjacent frames
When decoding with the flac utility, I don't see any messages. Does anybody know, where this behavior comes from? Might it be a good idea to rip and reencode the audio again or can I safely ignore these messages?
Last edited by Rachus (2015-03-14 16:59:26)

Thanks for your answer!
karol wrote:Are you using mpv and ffmpeg from the repos?
Yes, they are the vanilla packages from the repos.
karol wrote:Have you tried playing these files on another, non-Arch, system?
Well, I just updated an old Gentoo (which took some time) and experience the same messages with these files. Interestingly, when I fastforward, the message does not appear (on both systems).
karol wrote:Google shows these messages are pretty common, but since nothing seems to be broken, I don't think you need to worry.
Yes, I also tried to search these messages on Google. But I did not understand most of it. It's just that I could not understand why a file that was encoded by flac itself produce errors/warnings or anything like that when playing and just make sure that nothing is broken.

Playing large video files in the flash player

Hi,
At the moment I'm trying to play large video files (1GB+) in the JW Player, but after a certain amount of time, around 67 to 70 minutes, the video just stops playing. Does the Flash Player have a limit on the size of video files?

I'd need to debug it to figure out what's going on.
The best way to get traction on this is to file a bug. If you can provide a link that demonstrates the problem, that would be ideal.
http://bugbase.adobe.com/
Post the bug number here, and I'll forward it over to the video team.
Thanks!

E52 jump songs when play some AAC files downloaded...

Hi, Nokia fans. I recently updated my firmware to 034.001. MY E52 jumps songs when play some AAC files downloaded from iTunes store. It doesn`t occur until I updated to the newest firmware. Any idea how to fix this?
Regards for Chan

Actually, no I don't have crossfade playback on. The files cut out anywhere from 5 - 60 seconds before the file is supposed to finish, it really has nothing to do with crossfade...
iMac G5 17" Mac OS X (10.4.8)

Quicktime 7.2 will no longer play specfic mp4 files

Quicktime 7.2 will no longer play specfic mp4 files that 7.1 and earlier versions play fine, But new mac running 10.4.10 will not let me install earlier version, these files where used and edited fine on similar spec mac running 10.4.9 (both intel)

You did nothing wrong!
Quicktime has never played wmv files natively. You ned to download and install Flip4Mac WMV Player from http://www.telestream.net/flip4mac-wmv/overview.htm (Windows Media Player for the Mac is no longer supported, even by Microsoft)

Windows 7 Crashes/Freezes when playing ANY Video files

lets see can anyone get their head around this one as it is driving me round the bend.
So... I have a media centre PC connected to my HDTV by VGA cable. I ran the PC on XP for a long time but last December, I upgraded it to Windows 7
along with my laptop.
Cue 5 months of seamless media usage and network integration - it
worked like a dream and I played both HD and SD content with ease.
About two weeks ago, I was watching an HD '.mkv' file in Windows Media Centre and about 10 minutes into the video, the video file just Froze - both the video and the audio. I had to power down and restart the machine and started the video file again. About
5 minutes after re-starting the video file, it hung again (not at the same place in the video). I then went and watched the video on my laptop where
it worked fine.
A few days after this (first time I had used it again since it hung up) I began watching an SD '.avi' file. About 1 minute into the video the display lost it's signal (the little built in 'no signal' graphic came up) and after a further 15 seconds, the audio
cut out as well.
This latter behaviour is now happening every single time I try to watch any kind of SD or HD video of any file extention. This problem is also independant of what video player I use (windows media centre and windows media player classic) After a minute or so
the display cuts out and the audio quickly follows it.
Suffice to say, I was a little annoyed but knowing a good bit about computers I
decided to try and solve the problem taking the following steps.
1) I uninstalled all my codecs and reinstalled the latest version of the K-Lite Codec pack. The latest version has support for windows 7 so I doubt its a compatibility issue here. After doing this the problem still persisted, exactly the same as before.
2) I checked the date of the drivers for my video card (MSI nVidia 6200) and seen that they were dated sept 2009. I went onto the nVidia site and found the latest win7 drivers dated april 2010 - I installed these but still the problem is there.
3) I then thought, maybe its a problem with the actual video card hardware itself. When I built my machine the parts supplier accidentally
sent me two of the same video card so I swapped out the existing one for a brand spanking new version of the same card. The problem is still EXACTLY the same.
So yes -I am rather annoyed and frustrated at the moment as I have absolutely no idea what is wrong with the machine and how it went from working to not working almost overnight.
I'd like to add also that the display is perfect when doing anything else on the computer - I can surf, play youtube videos, listen to music etc and it is absolutely no problem.
Put on a video and it cuts out the display like I have explained.
halp.

Hello Tim,
I decided to do a clean install, a fresh new installation of windows and all its updates, I didn't get the option of
install SP1 yet.
After that I only installed Catalyst drivers: 11.5 and Realtek HD audio drivers, all downloaded on May 24 2011.
Then latest FFDShow and MPC-HC to test, both x64 versions Nothing else installed.
Only a fresh copy of windows with its updates and those mentioned drivers.
To my surprise, it happened a gain.
It still crashes after a while when playing MKV videos.
It's weird, because it doesn't happen with avi's or mp4's.
So, there must be something wrong with one of windows updates that creates this windows FREEZE.
Also there is no possibility to find out what error it is in "Event Viewer" as nothing gets recorded there. Anyone could
advise?
Thanks

How to play a MP4 file?

Hello all, I'm a new iPad user, I'm just want to play a MP4 (recorded using a GoPro HD camera) in the iPad. I've added the file to iTunes but when sinchronizing an error message says the file was not copied to the iPad because it cannot be played.
These are some properties of the video file:Lenght: 11:05; Size: 963MB; Frame width: 1280; Frame height: 960; Frame rate: 29 frames per second, Data rate: 12014 kbps; Total bit rate: 12142 kpbs.
Thanks for any help!

The supported video formats are (from http://www.apple.com/ipad/specs/) :
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

How to play an mp4 file on iphone 6

I have just bought an iPhone 6 that I want to use for watching movies when traveling - so I went for the 128GB to be able to store a few movies.
But I am lost - I have followed the instructions to use iTunes to transfer a movie (mp4) file. But where is the file on the phone? And what app do I use to play it? And BTW, will the wonderful VLC app come back for ios 8?

You have to sign out of the account. If the phone is using find my iPhone, you must have the ID and password to remove the phone from the account and activate with your own.

QuickTime: can't move to a specific point when playing .WMA audio files

I use a lot of .WMA audio files recorded on my Olympus Digital Voice recorder. Since the latest update of QuickTime I cannot move to a specific point in a file. When I click and drag on the diamond cursor it won't move. The only way to move through the file is to play it or 'fast' forward it - which takes ages.

I have the same problem. when playing wma or wmv file, simply just cannot drag the progress bar to a specific position. Just have to progress from the very beginning to the end. Once it has been played to the end, I can move the progress bar. Very weird
I have both flip4Mac and perian installed with the latest version.
Could anybody please help.
cheers

N80 Restarting "WSOD" when playing large mp4 files

Similar Messages

Maybe you are looking for