N80 restarts when try to use uPnP

I have a N80 Internet Edition with firmware 5.0719.0.2 and I installed the Home Media Server application from the CD.
I use windows XP SP2 Professional and a Comtrend CT-536+ router.
But when I try to enter in home network in the Gallery, the phone restarts in 3-4 seconds, I think that when it detects the PC.
Also I have updated the Home Media Server over internet.
What I can do?
Thanks

Problem is related with phone I think.
Can perform a soft reset or hard reset.

Similar Messages

My BB Z10 Auto Restart when it isnt used

BB Z10 STL100-1 , software version 10.2.1.2977 / SO 10.2.1.3247 - its restarting when i dont use it, i wiped it, reistaled the software. I already brought it to the service 3 times and nothing happened, just a wipe and resoft. please help i really like this phone !
Solved!
Go to Solution.

Hi and Welcome to the Community!
Based on your brief description, I'd have to surmise that perhaps your battery is somehow causal. To test, please try these items.
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Failing all of that and given you have already had in-person support, I'd have to surmise that your device is somehow damaged or defective. If you still have warranty, I'd therefore seek support under those terms.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN c

I met a problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN clients:
1. Background:
We have two WLAN: staff and student, both of them will use PEAP-MSCHAPv2, ACSE will be the Radius server, it will use Windows AD's user database. In AD, they create two groups: staff and student. The testing account for staff is staff1, the testing account for student is student1.
2. Problem:
If student1 try to associate to staff WLAN, since both staff and student WLAN using the same authentication method, the auth request will be send to AD user database, since student1 is a valid user account in AD, then it will pass the authentication, then it will join the staff WLAN. How to prevent this happen?
3. Potential solution and its limitation:
1) Use group mapping in ACSE(Dynamic VLAN Assignment with WLCs based on ACS to Active Directory Group Mapping), but ACS can only support group mapping for those groups that have no more than 500 users. But the student group will definitely exceed 500 users, how to solve it?
2) Use methods like âRestrict WLAN Access based on SSID with WLC and Cisco Secure ACSâ: Configure DNIS with ssid name in NAR of ACSE, but since DNIS/NAR is only configurable in ACSE, don't know if AD support it or not, is there any options in AD like DNIS/NAR in ACSE?
Thanks for any suggestions!

I think the documentation for ACS states:
ACS can only support group mapping for users who belong to 500 or fewer Windows groups
I read that as, If a user belongs to >500 Windows Group, ACS can't map it. The group can have over 500 users, its just those users can't belong to more than 500 groups.

Problem when try to use 2 computers

Hello there.
I'm now facing a problem when try to use 2 computers. Specifically, I downloaded my ebook (pdf form) in my laptop and open it without problems. But when I tried to reopen the same book (from human kinetics site) to my pc, the known message revealed ("E_LIC_ALREADY" etc etc).
As I realised, in my laptop, the ADE wasn't authorized (in fact, "is authorized without an ID"). I tried but didn't achieve to authorize it (it's not accepting my username and password, saying that the specific ID is already used, obviously when I made the similar procedure on my pc, a year ago), whereas I'm also not able to re-open the book in my pc (I made copy-paste to the appropriate folder of my pc, by the way...). What's the solution in this case? I mean, it's very annoying for me and I desperately want to solve it...
Thank you in advance,
Nikolas

Answer 1 : Really not quite sure about this ....
Answer 2 : turn the card upside down and check the model number .. the model number would be WPC54G and if there v2/v3/v4 after it it means that the card is version 1 ....
Answer 3: As you windows xp , go to start >> programs >> uninstall wireless notebook adapter.... insert the CD for the adapter ...take the card out and insert it back again.... follow the instructions on the found new hardware wizard ... this will install the drivers for the adapter and then you can use the windows wireless configuration utility to connect to the wireless network ....

Flashplayer in computer,when try to use,says needs to be installed ??

flashplayer in computer,but says needs to be installed when try to use it ????

Need to know:
Your operating system (Win, Mac, xpXP, Vista, 7, 8)?
Your Browser (IE, Firefox, Chrome, Opera, Safari)?
Any error messages?
Green screen in place of video?

Wheni try to use the VHScrCap as video the Adobe flash media live encoder 3.2 just closes?

Wheni try to use the VHScrCap as video the Adobe flash media live encoder 3.2 just closes?
how do i fix this?

Moving the discussion to Flash Media Forum.
Regards,
Anit Kumar

Error when try to use cmd tools (copylocale, mxmlc, etc)

Hi guys,
I have a Windows 7 64Bits with Java Jdk 1.7.0_25 64Bits (with Jre).
When I try to use cmd tools that came with Flash Builder 4.7, I get the following error:
Command: copylocate en_US pt_PT
Error:
Error loading: D:\Software\Java\jdk1.7.0_25\jre\bin\server\jvm.dll
The same error occore when try to use mxmlc.
I have the JAVA_HOME defined with D:\Software\Java\jdk1.7.0_25
I allready try to reinstall everything and show me the same error.
Can anyone help me?
Thanks,
Pedro Quintas

Hello again Joe Bo... and all of others,
I´m with a doubt after installing the CPU patch, which is related to post-installation tasks. I´m in this momment install the SAP System and it was during this installation that sapinst asked me to install the database and all other activities after this installation that are related to the database, for example, the updating of database patches.
At README file in chapter 3.3.2 Post Installation Instructions is described the following:
After installing the patch, perform the following actions:
1.Load modified .sql files into the database, as explained in Section 3.3.2.1.
2.Recompile views in the database, if necessary, as explained in Section 3.3.2.2.
In this momment, as you certainly know, I still don´t have a database because the sap system isn´t yet totally installed (I´m in phase 8 of sapinst wizard).
I only have to do this "Post Installation Tasks" when I have a database, this database will be created after that phase 8 - so now I don´t need to perform the post steps... am I right?
Thanks in advance,
João Dimas - Portugal

N95 8GB restarts when trying to use Voice Dial on ...

Ok, so when I have my N95 8GB connected to either a line-out speaker or a blue-tooth earphone, the strangest thing happens. When I try to use voice-dial, right after I say the name I want to dial - the phone freezes. When I press any key on the phone, it restarts. Voice dial works fine when no external device is attached, but if I even connect earphones - it breaks. Anyone experienced this? I'm using FW 35.0.001 Thanks, Ambious

It sounds like that where the phone stores the voice tags has become corrupt so that when the unit tries to access them the phone gets unrecognised data which in turn resets the handset.
Take the unit to yur nearest NSC for a software upgrade.
Hope this works for you.
Gadget
Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

IMac (Oct 2009) keeps shutting down and restarting when not being used.

At least once a day, usually when not being used, I will see a dialog box that say computer had to restart due to a problem. data in problem report does not clearly state problem - many multi-page entries
Have reinstalled OS 10.8.2 once
this morning tried to restart with safe boot and had spinning beach ball for more than 15 minutes. shut down and restarted nin recovery mode. verified and repaired permissions (all seem to be related to Canon Pronter plug-ins- had an error message yesteday asking if I wanted to repair printer software and I said yes). Printer seems to be working. Had one statement that indicated a screensaver issue-see below
a while back, iTunes album art screensaver hung up with just two album covers flipping in all rows and columns.
after a few restarts, it started working correctly again..- yesterday I set screen saver to never, but still had a crash this morning

Here's the latest panic report. BTW, I ran for a while from an external system boot - very sloww (thumbdrive), but nothing happened. However, when I retarted I tried to restart in Safe Mode and the launch never completed (30 minutes without start)
Tue Jan 1 07:15:40 2013
panic(cpu 0 caller 0xffffff8002443908): "zalloc: \"buf.8192\" (878 elements) retry fail 3, kfree_nop_count: 0"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:1826
Backtrace (CPU 0), Frame : Return Address
0xffffff800aafb2b0 : 0xffffff800241d626
0xffffff800aafb320 : 0xffffff8002443908
0xffffff800aafb400 : 0xffffff80024de8d8
0xffffff800aafb450 : 0xffffff80024de395
0xffffff800aafb500 : 0xffffff80024dd64b
0xffffff800aafb530 : 0xffffff80024dd7f7
0xffffff800aafb550 : 0xffffff80026e7766
0xffffff800aafb5c0 : 0xffffff800272024c
0xffffff800aafb5e0 : 0xffffff8002721314
0xffffff800aafb680 : 0xffffff800271d2a0
0xffffff800aafb790 : 0xffffff800271959c
0xffffff800aafb840 : 0xffffff800271936a
0xffffff800aafb8c0 : 0xffffff80025137df
0xffffff800aafb910 : 0xffffff8002509fe1
0xffffff800aafb950 : 0xffffff800252685c
0xffffff800aafba00 : 0xffffff8002526679
0xffffff800aafba30 : 0xffffff8002712518
0xffffff800aafbaa0 : 0xffffff8002511c46
0xffffff800aafbae0 : 0xffffff800250936c
0xffffff800aafbb90 : 0xffffff80024fbb49
0xffffff800aafbc40 : 0xffffff80024fc314
0xffffff800aafbf50 : 0xffffff80027e182a
0xffffff800aafbfb0 : 0xffffff80024ced33
BSD process name corresponding to current thread: mdworker
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel slide:     0x0000000002200000
Kernel text base: 0xffffff8002400000
System model name: iMac10,1 (Mac-F2268DC8)
System uptime in nanoseconds: 39390380895329
vm objects:17562048
vm object hash entri:2264400
VM map entries:6216720
pv_list:19034112
vm pages:74043792
kalloc.32:1826816
kalloc.64:170766336
kalloc.128:649785344
kalloc.256:648183808
kalloc.512:2285568
kalloc.1024:2637824
kalloc.4096:2387968
kalloc.8192:3989504
ipc ports:2168672
threads:1166880
vnodes:16507128
namecache:6952320
HFS node:21840864
HFS fork:6352896
decmpfs_cnode:2244312
buf.8192:7192576
ubc_info zone:3559464
vnode pager structur:1978800
Kernel Stacks:1982464
PageTables:44011520
Kalloc.Large:12347186
Backtrace suspected of leaking: (outstanding bytes: 236544)
0xffffff80024435b9
0xffffff80024245ed
0xffffff80027ee1bd
0xffffff80028507f7
0xffffff800285075b
0xffffff7f82b6b1ac
0xffffff7f82b72922
0xffffff7f82ab138b
0xffffff7f82ab49b0
0xffffff7f829f843c
0xffffff800243dcde
      Kernel Extensions in backtrace:
         com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000->0xffffff7f82a1cfff
         com.apple.iokit.IOSCSIBlockCommandsDevice(3.5.1)[E4EAAA05-F607-3299-AE72-998D19 A5EA17]@0xffffff7f82aae000->0xffffff7f82ac3fff
            dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000
            dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8297c000
         com.seagate.driver.PowSecDriverCore(5.2.2)[F1208D07-4D35-0191-3638-3D7CA8C9D5CF ]@0xffffff7f82b69000->0xffffff7f82ba1fff
            dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f82a4c000
            dependency: com.apple.iokit.IOSCSIBlockCommandsDevice(3.5.1)[E4EAAA05-F607-3299-AE72-998D19 A5EA17]@0xffffff7f82aae000
            dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8297c000
            dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000
            dependency: com.apple.iokit.IOFireWireSBP2(4.2.0)[2B060BAD-9A9B-3A52-A742-A37CDFC59570]@0xf fffff7f82b4b000
last loaded kext at 1223700924328: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f84440000, size 16384)
last unloaded kext at 1481342745694: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f84440000, size 12288)
loaded kexts:
com.pogoplug.filesystems.ppfs          2010.10.7
com.seagate.driver.PowSecLeafDriver_10_5          5.2.2
com.seagate.driver.PowSecDriverCore          5.2.2
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHDA          2.3.1f2
com.apple.driver.AppleBluetoothMultitouch          75.15
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.filesystems.autofs          3.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.kext.AMDFramebuffer          8.0.0
com.apple.ATIRadeonX2000          8.0.0
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.driver.AppleIRController          320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AirPort.Atheros40          600.70.23
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.nvenet          2.0.19
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          165.5
com.apple.driver.AppleHIDKeyboard          165.5
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.driver.IOBluetoothHIDDriver          4.0.9f33
com.apple.driver.AppleMultitouchDriver          235.28
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.kext.triggers          1.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleUSBAudio          2.9.0f6
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.kext.AMD4600Controller          8.0.0
com.apple.kext.AMDSupport          8.0.0
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOFireWireSBP2          4.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

Java.lang.NoSuchMethodError when try to use RDBMS WLI adapter sp2

Hi,
We have encountered a problem when trying to use the latest version of the WLI
RDBMS adapter downloaded from the website.
This adapter comes as an ear file of size 4026K.
Has anyone been able to get this version to work??
Was using the earlier version of size 3278K happily but found a few bugs in it
so wanted to use the later version but when we do, we can't call any Application
View services.
When we try to call a service we get the error:
java.lang.NoSuchMethodError at com.ibi.beardbms.cci.InteractionImpl.execute(InteractionImpl.java:217)
at
com.bea.adapter.cci.AbstractDocumentRecordInteraction.execute(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean_g38mgs_EOImpl.invokeService(ApplicationViewBean_g38mgs_EOImpl.java:732)

Hi Adam,
You need to get Patch CR095687 in order to use this adapter with SP2, (and
stop this exception). It's mentioned in the release notes
(http://edocs.bea.com/wladapters/rdbms/docs70sp2/pdf/relnotes.pdf), a the
bottom of page 3. You need to contact BEA support for this patch.
Dave
"Adam Finlayson" <[email protected]> wrote in message
news:3ea8f771$[email protected]..
>
Hi,
We have encountered a problem when trying to use the latest version of theWLI
RDBMS adapter downloaded from the website.
This adapter comes as an ear file of size 4026K.
Has anyone been able to get this version to work??
Was using the earlier version of size 3278K happily but found a few bugsin it
so wanted to use the later version but when we do, we can't call anyApplication
View services.
When we try to call a service we get the error:
java.lang.NoSuchMethodError atcom.ibi.beardbms.cci.InteractionImpl.execute(InteractionImpl.java:217)
at
com.bea.adapter.cci.AbstractDocumentRecordInteraction.execute(UnknownSource)
at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(UnknownSource)
at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(UnknownSource)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(UnknownSource)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(UnknownSource)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(UnknownSource)
atcom.bea.wlai.client.bean.ApplicationViewBean_g38mgs_EOImpl.invokeService(App
licationViewBean_g38mgs_EOImpl.java:732)

Acrobat XI Pro is requesting a password when try to use

If I open Acrobat XI from my Start Menu, It comes up with the program possiblities (edit open, etc). The first time I try to use it, it goes to a screen with Acrobat XI trial; I click on License this software, and it as me to sign in. Then it comes up with a request for Serial Number. Any suggestions would be appreciated

I'm assuming you did subscribe before, you aren't just testing the trial.
1. Make sure you are signing in with the same Adobe ID used for your subscription.
2. Check your account info on Adobe's site to make sure the subscription is (still) active.

N82 restart when tryine to use speed dial 1

Hi,
When i press and hold 1 to access my voicemail my phone restarts.. It just seemed to happn, no changes were made to the phone. I recently installed the newest firmware but it didnt fix it... Any ideas?
Thanks
Chris

You could try doing a restore factory default settings. It won't delete any data of yours, you'll juet have to redo your theme, ringtone, wallpaper etc. settings afterwards.
Enter *#7780# from the standby screen and then supply your security code (12345 unless you've changed it).
I doubt it'll work but it's worth a shot.
The N82 was one of the first phones to have UDP, so maybe a reset might help.
Back up all your data to a computer using PC Suite and then enter *#7370# from standby and provide the security code when prompted.
Check to see if it works now. If it does, restore your data from the backup.
Try again.
If it no longer works then your data was corrupt. Reset the phone again and then restore everything but your settings. If it continues to stop working after a restore then repeat the reset and restore one less element of the backup each time until you narrow it down to the part that's causing the problem, then finally do a last reset and restore all but that element.
If none of the above work then you'll need to take/send the phone into your local Nokia Care Point.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

N95-2 restarting when keyboard is used to start WL...

I have had this issue for a while now, but it was not until today when i figured out how it was happening
Every time I use my Nokia Bluetooth keyboard to start the WLAN wizard my phone restarts.
It works just fine when using the phones navigation buttons, even with the keyboard connected. But if I select the WLAN wiz icon and hit the return key or the selection key , the phone just resets itself
*and don't say, "just use the phones selection key"...lol*
N95-2
Firmware 11.0.26

Hi! First I would create a system repair disc. If you still have a problem, restoring back to factory will eliminate software and you can start finding what hardware is causing you this problem. Key Board or Mother Board would be good suspects.
http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
http://forums.toshiba.com/t5/Computer-Troubleshooting/What-can-I-do-if-my-Windows-7-or-Windows-Vista...
PS Strange that it won't turn on with the power button. Are you holding it down for a couple of seconds?
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

N80 crashes when answering calls using slider.

Have spoken to Orange about this and they are saying (as if they'd say otherwise) that this is a 'new' issue for them. Has anyone else experienced this?
Phone call comes in - open the slider to answer call only to have the phone lock-up. None of the menu buttons or keypad work. The phone keeps ringing with an active display but the only button that works is the power!
Orange have referred this to technical support.
V 3.0614.0.3
11-04-2006
RM-92
Nokia N80 (31.02)
Thanks,
Matt

Well, after another referral to Orange Tech Support, I finally have a new handset.
I started having more 'crashing' events on my phone when using sms, gallery, camera.
Called Cust Service who wanted to do the same stuff all over again...i.e. reset phone but I insisted that they escalate it.
They got back to me within 72 hours and I had a new handset the following week. Upon checking I now have an up-to-date firmware.
As an aside, the new phone actually feels a lot different. The slide is firmer and more stable and the keypad also feels of a better quality. Anyone had similar experiences?
Cheers,
Matt

T61p restart when try to install the system.

Hello,
I have replaced motherboard on my lenovo T61p, old one was broken ( nivida chipset was burned). But right now after replacing motherboard I'm able to turn it on, i can go to bios setting, run mem test from cd. But when I'm trying to install system (Linux,win 7, win xp) it 's restarting. On windows 7 i can see the first progress bar under the DOS but when the bar is loaded and nice blue windows should appear it restarting. On win xp I'm able to format the hard drive, copy the files to HDD but when it restart and run from HDD, I can see the progress bar " installing device" 39 min left, and restart.
I have replaced Processor,memory, disconnected WIFI ,modem all unnecessary device but i still have this problem.
Maybe someone has this problem before ?

This is a longshot, but substitute a different harddrive if possible. If a drive is pulling to many amps, it will force the system down for lack of power. Any direct current motor, like in a harddrive could draw to much amps and cause this.
This is theory, I've not actually seen a bad drive do this, but it's worth a try.
If you don't have a drive to try, get a linux Live CD disc and boot from your optical drive without a harddrive. That should work , and if it seems stable, then you will need to find a known good trive to test.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

N80 restarts when try to use uPnP

Similar Messages

Maybe you are looking for