N80 slider problem

hi,
i have a nokia n80 and the upper part of the slider is shaking. will it break appart????does any other nokia n80 user have this problem?????
At last a nseries phone im truely happy with THE N82

but they said it willl give me network problems and also the phone will stop working so i dont want to take a risk
At last a nseries phone im truely happy with THE N82

Similar Messages

  • N80 sound problem.

    Hi, my N80 is about 15 months old and been working fine till now.
    When i make or receive a call, i don't hear anything. I have to put it on speaker or use headset to do that.
    (i think it may be hardware issue)
    I am not to sure what the problem is, and i will greatly appreciate if you can help me sort it out.

    Yes, I think w have more or less isolated the problems to the ribbon cable between the slides. If it is then it will get worse as the cable continues to wear each time you slide, so it will just be a matter fo time before it goes completely. That cable also connects your display so that may experience problems as well.
    Cable problems are unfortunately quite common with the N80. You will have to check cost of replacing it with your local Nokia Care Centre. I don't think it is very expensive. It is only a cable after all.

  • N80 display problem

    Hi all,
    I own a nokia n80 firmware version V 4.0623.0.42, which should be the latest update.
    My problem is that when I open or close the slide, the display goes corrupted and after remains white. To come again back to normal, I have to open or close again and after a while it comes ok. I tried to reset and as well updated software but to no success.
    I opened as well the mobile and noticed that on the back of the slide there are 2 pairs of contacts. 2 in line and 2 vertical.
    Does anybody knows for what these contacts are ? Can they be the cause of my problem somehow ?
    Regards
    Dav205

    14-Jul-200704:48 PM
    dav205 wrote:
    I tought that maybe those pins reset the display. Since they work on the far limits when I open or close the slide.
    Problem is how they work in sense of voltages
    So what do you think that's wrong ?
    Ok if those are the pins i am thinking of my theory is that because of the static or whatever they are what recieve the radio waves to make recieve calls texts radio internet 3g and all that. If there are other pins that aren't these i am not sure.
    Phones owned: 7
    Nokia: 6
    Models:
    3310,3200,6610i,6060,6233,6120c
    Current: 6120c and loving it.

  • Web Gallery Scroll Bar Slider Problem

    Hi,
    I'm running Windows XP Professional and Lightroom 1.3.1. I seem to have a problem with the functionality of the sliders in the scroll bars of the web galleries that I make. I use the Flash templates.
    I can drag the slider to move through the thumbnails. But when I click in the open area of the scroll bar to scroll forward or backward a page at a time, nothing happens. That functionality seems to be missing. My cursor will change to a pointed finger when it moves across the slider bar, and the up and down arrows at the ends of the scroll bar. It will not change when I place it in the open area of the scroll bar, indicating that the functionality does not exist.
    This seems very odd and contrary to the global behavior of slider bars in all other applications, including within Lightroom.
    Any idea what's going on and any solutions?
    Thanks,
    Steve

    Hi...
    Please check in your application parameters. Did you declare wdtablenavigation parameter?
    and check table properties like scrollbarvisible always  or none...
    Check this link for application parameters.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/7b/fb57412df8091de10000000a155106/content.htm
    Regards
    Srinivas

  • Nokia 701 lock slider problem

    Hi guys, i bought my 701 a month ago and i'm experiencing an annoying problem with the screen lock/unlock slider at the side of the device (probably after updating to Belle FP1) sometimes when i lock/unlock the screen it repeats the action twice, for example when i unlock the screen it unlocks and suddenly it locks again i tried soft and hard reset but no luck is there any solution ?
    Solved!
    Go to Solution.

    Take it to Nokia care
    If my post has helped you please click the white star on the right

  • 6500 Slide Problems

    Hello,
    I brought a Nokia 6500 Slide about a month ago, about a week ago all the buttons stopped working except for the End Call (red button), so i could only turn it on and off.
    Couple days ago they started to work again, but then i came across another problem. Now everytime i switch the phone on if works fine for a couple seconds then resets to the starting screen and switches itself off.
    The software version is v8.3
    Any help on this please ?
    Regards

    Probably the best advice ever given to me about this particular model phone (Nokia 6500) was from a tech support guy, who i might add was very patient with a new user (yes new, not novice - don't assume i know nothing about phones) he spoke clearly and slowly these words.
    "Ok sir, please give me another number i can contact you on"
    - so i gave him the number of my girlfriends phone -
    -30 seconds later he calls back on the other number -
    "Ok now go ahead and power down (turn off) your phone and allow at least 30 seconds for the power down to finish, now please go ahead and remove the back plate of your phone, now remove your battery and wait a further one minute while we discuss some other features you mentioned earlier" - so he was giving the phone time to go completely dead with no power (battery removed) and kept chatting to me about other features on the phone, while i presume he kept one eye on the clock- after about 3-4 minutes of discussing some other features on the phone, he said "Now go ahead and reassemble the phone, by putting the battery back in and replacing the back plate" -after i had done all this he said- "Now please turn the phone back on and wait at least 2 minutes before touching any other keys" -again he kept me talking about other features on the phone, whilst maintaining one eye on the clock- at the end of it all- "Please reset all your ringtones and personal settings the way you would like them to be" -again he waited on the line while i did this-"Now please if you have any other problems like this, please call us back" and to this day, i have not called them back.
    Listen carefully to what a tech support guy says, follow his/her instructions to the letter and you too can have a trouble free Nokia 6500 like me.
    Occasionally when my phone does this default reset - i feel as though it might be a problem with the interface between the mico SD card and the phone's ability to communicate between the 2. So a simple hard reset as described above almost always fixes the problem. Nokia's source coding would be older then most people who come on these forums - and have no doubt in saying that there may be some slight glitches in this particular release ... but a simple hard reset almost always fixes this particular problem.
    Some programs that run devices are almost mechanical and if they miss a step, have almost no way of reverting back to the previous step, so resetting the phone will take us back to the first step and allow the phone to work it's way through it's own process until the glitch becomes evident again.
    Message Edited by mad_on_phones on 19-Oct-2008 11:55 PM

  • Timeline Slider Problem

    hello,
    I'm having a problem with my timeline slider everything works great on it until I try and hide it when going to a new page in the flash. There are two pages, a homepage with the timeline and second page with the timeline hidden. When going to the second page I want to have the timeline slide off the document. When I do this it causes the timeline slider tab position to jump back to the beginning of the timeline before sliding off screen. I can't seem to figure out how to preserve the slider tab position before the timeline moves off screen.
    Originally the slider tab of the timeline animates onto screen using a traditional tween after running this as2:
    var enableTicker = false;
    var tickerMc:MovieClip = this.createEmptyMovieClip("tickerMc", this.getNextHighestDepth());
    tickerMc.onEnterFrame = function() {
    if(enableTicker) {
    if((timebutton._x > 35) && (timebutton._x <= 70)) {
    if((_root._currentframe != 46) && (_root._currentframe != 45)) {
    theframe = "frame1920";
    //_root.blender.gotoAndPlay(2);
    _root.gotoAndPlay(theframe);
    if((timebutton._x > 70) && (timebutton._x <= 140)) {
    if(_root._currentframe != 47) {
    theframe = "frame1930";
    //_root.blender.gotoAndPlay(2);
    _root.gotoAndPlay(theframe);
    if((timebutton._x > 140) && (timebutton._x <= 208)) {
    if(_root._currentframe != 48) {
    theframe = "frame1940";
    //_root.blender.gotoAndPlay(2);
    _root.gotoAndPlay(theframe);
    if((timebutton._x > 208) && (timebutton._x <= 275)) {
    if(_root._currentframe != 49) {
    theframe = "frame1950";
    //_root.blender.gotoAndPlay(2);
    _root.gotoAndPlay(theframe);
    if((timebutton._x > 275) && (timebutton._x <= 345)) {
    if(_root._currentframe != 50) {
    theframe = "frame1960";
    //_root.blender.gotoAndPlay(2);
    _root.gotoAndPlay(theframe);
    if((timebutton._x > 345) && (timebutton._x <= 413)) {
    if(_root._currentframe != 51) {
    theframe = "frame1970";
    //_root.blender.gotoAndPlay(2);
    _root.gotoAndPlay(theframe);
    if((timebutton._x > 413) && (timebutton._x <= 481)) {
    if(_root._currentframe != 52) {
    theframe = "frame1980";
    //_root.blender.gotoAndPlay(2);
    _root.gotoAndPlay(theframe);
    if((timebutton._x > 481) && (timebutton._x <= 547)) {
    if(_root._currentframe != 53) {
    theframe = "frame1990";
    //_root.blender.gotoAndPlay(2);
    _root.gotoAndPlay(theframe);
    if((timebutton._x > 547) && (timebutton._x <= 610)) {
    if(_root._currentframe != 54) {
    theframe = "frame2000";
    //_root.blender.gotoAndPlay(2);
    _root.gotoAndPlay(theframe);
    if((timebutton._x > 610) && (timebutton._x <= 690)) {
    if(_root._currentframe != 55) {
    theframe = "frame2010";
    //_root.blender.gotoAndPlay(2);
    _root.gotoAndPlay(theframe);
    //trace(timebutton._x);
    At the end of the tween the slider tab has this as2:
    on (press) {
    if(init) {
    startDrag("timebutton", false, 32, 440, 637, 440);
    if(!dragHelpInit) {
    dragHelpInit = true;
    _root.dragHelp.gotoAndPlay("hideDrag");
    dragging = true;
    usingDrag = true;
    on (release) {
    if(init) {
    stopDrag();
    if((timebutton._x > 31) && (timebutton._x <= 100)) {
    if((_root._currentframe != 46) && (_root._currentframe != 45)) {
    theframe = "frame1920";
    _root.blender.gotoAndPlay(2);
    if((timebutton._x > 100) && (timebutton._x <= 170)) {
    trace("i'm here");
    if(_root._currentframe != 47) {
    theframe = "frame1930";
    _root.blender.gotoAndPlay(2);
    trace("and here");
    //_root.gotoAndStop("frame1930");
    if((timebutton._x > 170) && (timebutton._x <= 235)) {
    if(_root._currentframe != 48) {
    theframe = "frame1940";
    _root.blender.gotoAndPlay(2);
    if((timebutton._x > 235) && (timebutton._x <= 303)) {
    if(_root._currentframe != 49) {
    theframe = "frame1950";
    _root.blender.gotoAndPlay(2);
    if((timebutton._x > 303) && (timebutton._x <= 373)) {
    if(_root._currentframe != 50) {
    theframe = "frame1960";
    _root.blender.gotoAndPlay(2);
    if((timebutton._x > 373) && (timebutton._x <= 443)) {
    if(_root._currentframe != 51) {
    theframe = "frame1970";
    _root.blender.gotoAndPlay(2);
    if((timebutton._x > 443) && (timebutton._x <= 508)) {
    if(_root._currentframe != 52) {
    theframe = "frame1980";
    _root.blender.gotoAndPlay(2);
    if((timebutton._x > 508) && (timebutton._x <= 573)) {
    if(_root._currentframe != 53) {
    theframe = "frame1990";
    _root.blender.gotoAndPlay(2);
    if((timebutton._x > 573) && (timebutton._x <= 630)) {
    if(_root._currentframe != 54) {
    theframe = "frame2000";
    _root.blender.gotoAndPlay(2);
    if((timebutton._x > 630) && (timebutton._x <= 720)) {
    if(_root._currentframe != 55) {
    theframe = "frame2010";
    _root.blender.gotoAndPlay(2);
    trace(timebutton._x);
    dragging = false;
    Now when I try to animate it off screen it obviously jumps back to the initial position because I'm basically just using the same key frames, but reversed. Does anyone know how I can preserve the position of this slider tab?

    Just to get this out of the way early, as a test, make sure that the Timeline Panel has focus, and try the Spacebar again. While the Timeline will play, with many other Panels having focus, I have encountered times, where, say focus on the Project Panel, will not allow the Timeline to play.
    In PrPro, there is an orange border around any Panel with focus, but PrE is not so easy to spot, unless you are looking at the Timeline Panel's border, when you click on it, and notice a very subtle (I mean VERY subtle) change.
    Good luck,
    Hunt

  • N80 Gallery 'problems'

    Hi!
    I have been a 6280 user and have just upgraded to the N80, i have a couple of minor problems and irritations which may be simple to solve but i can't find them.
    In the gallery there is the option to look at pictures and videos but i would prefer to look at one or the other and not both at the same time. I would also preferrably like to only browse a folder at a time not all 300 or so pictures.
    Finally, is it possible to view the pictures with the phone in 'portrait' mode rather than 'landscape' as they would then be bigger on the screen.
    Many thanks,
    Engelkott

    The Gallery can be used to limit what's shown only by using the Albums feature of the Gallery app (which just alternate views to subsets of the full content).
    Unfortunately, not a very practical feature in my opinion. I'd prefer to be able to organize them content to different directories (folders), instead, but the Gallery app designers have taken a differeny route. Maybe they'll come to their senses some day and it gets changed back.

  • N80 Firmware problem

    Hi, tell me something its there any N80 new firmware after 3.0617.0.6 because that one is good but when i access the phonebook and exit it, in my display appear for a second the phone book again but blinking. Let me know thanks

    Hi
    I had the same problem and after many hours searching I ended up sending for firmware reinstallation.
    I would advise getting Three to get a courier to collect and return as they picked up on a Monday and I had it back on Wednesday!
    Hope this helps

  • Nokia N80 startup problem

    hello everyone. i have recently bought a nokia n80. i have been uploading new themes on my cellphone and one of the themes messed up the screen. so i turned off and on my cellphone and this message pops up. it says "Phone start-up failed. Contact the retailer." can someone please help me fix this problem. i just had my cellphone for least then 1 month. i do appreciate if someone can help me solve this problem.
    thank you.

    You will need to take this to a Nokia Care Point.
    Once your phone is giving the message "contact the retailer" its a fatal error.
    You have already lost all phone contents not saved to sim and MMC.
    You can find your nearest NCP to you at the Store Locator
    Also from the IMEI you gave, your handset holds no warranty in the EU.
    It was a handset which was produced in Nigeria.
    You will only be able to get that fixed there.
    Message Edited by adamf on 04-Jan-2008 02:43 AM
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

  • N80 button problem

    Does anyone experience this problem in N80? I just got the N80 month ago and everything go fine. Until fews days ago, I just notice that sometime there are some of the buttons in the front peice is not work.
    I wonder if these is effect from upgrading miniSD card to 1GB, so I swap to use the 128MB that come with the phone. But the problem still persist.
    It should not the physical problem of the button itself, because some happen on the up button, down button, C (backspace) button, and some other button on the front piece and happen to 2-3 buttons in the same time. This's very annoy me especially when I want to type a mesage or modify phone book item.
    Any recommend would be highly appreciated.
    Thanks,
    Noom..

    you can do the soft reset *#7780# or the hard reset *#7370#
    Soft will only delete the things not needed, like the Cache I believe but the hard reset will make the phone like it was just out of the box. Always backup to the memory card if you are able to and always double this by using the PCSuite.Message Edited by taffytafftaf on 23-Oct-2006
    06:59 PM
    Is that an N95 in your pocket or are you just pleased to see me?!?
    Life's too important to take seriously.
    Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
    I'm a 26 year old boy BTW

  • N80 issue / problem

    Sure the N80 is a great phone. I don’t mean to talk down the N80 or Nokia for that matter.
    I paid $1011 aus for my N80 and the sms screen don’t even fit
    (The first 2 letters are missing from the left side of the phone for each word)
    I'm feeling a bit ripped off here.
    I am going to get a replacement handset tomorrow because the service center said this is the best idea, but I think it’s more a firmware problem not a handset problem.
    Also the gallery is great but if only there was a way to organize it into folders and not just show every images on the phone.
    So what i’m trying to say is I buy a expensive phone that can’t read / write sms and I can’t organize / hide my images from the gallery.
    Does any one know what the rumored firmware V4.XXXX will fix / do for the N80 and when I will be released?
    Like I said i'm not bagging the N80 or Nokia I just want to fix a few problems that many people seam to have.
    locked this thread, please see duplicate:
    N80 galleryMessage Edited by orinoco on 11-Aug-2006
    04:26 PM
    Message Edited by orinoco on 11-Aug-2006
    04:27 PM

    Hi,
    I have had this problem for the past 4 months with my N80, mine is the UK black generic N80 (Bought sim free), and I am also using O2, this problem was semi regular until recently when I just couldn't recieve or send messages at all.
    Today I updated my firmware via the updater for the first time since purchase, from the first release to: V4.0623.0.42 and recieved a whole mountain of text messages, since then I have had no problems but of course it is early days yet.

  • N80 SMS problem/restarting (!?)

    hi.
    I have a few problems, i don't know if they are linked.
    I'll start with a background story. I had UltraIMpro, and F-secure anti-virus (both trial versions) on my N80, both had run out of subscriptions. I noticed that my phone had started to restart tself a lot, sometimes about 3 or 4 times a day, i knew it was doing this because that F-secure screen always appeared after it had restarted, asking me if i wanted to do a scan, as usual! I always just exited the program, and have scanned for viruses, there arent any!
    Anyway, this Restartign thing got annoying, and then another thing introduced itself! I was with some friends, and both of them said they had texted me earlier, but i hadn't received them. The next day, i turned my phone off, and when i turned it pon again, i got the 2 text messages. These messages did not appear when the phone restarted itslef, but only when i turned it off myself. This happened once more, after which i got **bleep** off and decided that maybe i should back-up my data on my 1GB card and hard-reset the phone, maybe this would solve the problem i thought.
    So, one night, i tried to do this, and i got the error message "Memory card full : close some applications and try again" now, i have 540mb free on this card, and no applications running on the phone. Even right now, it wont let me make a backup, Could anyone explain this??
    So, having failed that, i wondered if these extra applications were annoying my phone, so i uninstall the useless ones, F-secure and UltraIMpro, and surely enough, i go and run a few tests, and the SMS's seem to be arriving fine and imemdiately. Is that logical at all? Is there a phoesable explanation for this?
    I can't tell if that has fixed the restarting problem, as i uninstalled F-secure, which was the only thing telling me that it was restarting, but i haven't seen it restarting yet, so i also hope that problem has blown over.
    So, basically, i was just looking to see if anyone could help me with this memory backup problem, and if someone could explain all of this gaffuffle!
    Thanks!
    my phones in order of appearance : (starting 3 years ago!) Sony CMD-Z1 plus, Motorola timeport, Nokia 3310, Nokia 3410, Sony Ericsson T300, Sharp GX10i, Sharp GX30i, Sagem My-X-2, Sony Ericsson V800, Sony Ericsson P900, Samsung D500, Sharp 902, Nokia N80 (got mugged by 4 20 year olds). Motorola V3, Sony Ericsson K610i, Samsung D800, LG Chocolate, Nokia N70!
    I change phones a lot, have had 11 different handsets in 2006!!

    ok lets start:
    restarts.....delete all apps on the phone including themes etc.(use pc suite to save what you need on your pc)i believe this prob stems from the f secure trying to still read your system and cant cause its a trial so its not completing the operation and basically hindering the other apps
    text messages- n80 has a lag in sending text some prior users have complained that it freezes for 40secs when they sent text messages.....please dont worry about this its a firmware problem/bug which if you go to a nokia service centre it can be upgraded to the latest firmware in the uk...be patient as well as nokia has also introduced over the air and downloadable firmware upgrades....unfortunately the n80 is not yet available....so its nsc or wait until it is(it is very easy to do this as ive upgraded one of my older models which is available.....click on home on the top of this page and at the bottom left there should be some info on this)
    memory card- i have found that certain cards do not work well with mobile phones i suggest sandisk which sem to work well with mobile phones.....that memory problem seems to have been a bug to others i didnt have this prob(2gb sandisk memory card) so i guess this is dependant on the actual handset some give this prob others dont.....firmware upgrade is expected to change this hopefully.....
    lastly as said in the first answer save your stuff to your pc and then you can master reset your phone this helps as well (press *#7370# on the active standby screen) but remember all data will be lost including contacts so save everything!!!!!

  • N80 MP3 problem

    My wife's just got her new N80 and it seems to have some issues playing MP3s. There's quite a few i've just transferred straight from my SE K750 to the N80 that upon trying to play them the phone just says "Unable to play media clip". They're just standard MP3's nothing special, some work some dont. I've googled the problem and it seems many people with N70's had th e issue but unfortunately nobody ever replied with a fix.
    Any ideas? They all work no bother on both my SE K750 & her old SE S700.
    We've tried transferring using the USB cable & via Bluetooth just to rule out corruption but its the same files that dont work every time.
    Thanks

    from what u stated it seems that:
    1. u at one point removed your memory card which means that u must personalize again
    2.you moved the song from the folder it was in originally again youll need to personalize
    thats the two easy solutions the hard solution:
    your phone may have a firmware problem given the version that you have....and youll need to take it to a nokia service centre to upgrade.....
    lastly, before doing that what you can do is delete the song completely and then put it back on using nokia pc suite into your selected folder....try these solutions and let me know what happens

  • N80 connectivity problem

    hello, i just got the n80 and the only way to use the wlan is to get as far as ten cm from the router. i tried it at several places including a libary (which has a strong signal). i tried the option of disabling the power saving mode and it didnt help. what sould i do? in addition, are there definitions to maximize the connectivity?
    thanks, kobi

    04-Sep-2006
    06:49 PM
    alexfromboston wrote:
    Thanks a lot pfloding for your input. It seems though to be a different problem - your phone suddenly drops quality of 3G and WLAN communications. I would definitely have contacted Nokia or whoever sold you this baby ‘cause from what you describe it looks faulty to me.
    I don't think it is a hardware problem, as battery life, 3G reception and WLAN suddenly works much better. My guess is that something in the WLAN implementation causes the phone to go into some kind of fruitless loop, wasting battery and interfering with 3G. I have turned of the WLAN setting "Show availability" now (WLAN works fine anyway), and so far things seem better!

Maybe you are looking for