N80 SOFTWARE PHONE UPDATER PROBLEM

Just to clarify further:
I attempted to download a software update for my N80 phone. It seems as if I had not actually completed the software download, and I now realise this after re-tracing the steps I took. What was left on the phone I remember was a ".sis" file.
I followed your advice yesterday.... I in fact reset the phone memory... to no avail. The same problem exists with the phone i.e. unable to access certain features eg. Gallery; extremely slow response to pressing keys on the phone. What should I do??
1) Should I attempt from scratch to download the update from the Nokia site to my phone again??
2) Should I just take it to a phone store and attempt to repair it??
3) Does it seem I have permanently damaged the phone - aarrgghh!
Your comments appreciated... HELP!!

Hi sjgarciav
Unfortunately things are not looking good. Firstly try leaving battery out for 5 minutes and then replace.
Secondly you might like to look at post from nando61 just input "N93 update fix" into "Search Discussions" at top right of screen. Although different S60 phone to yours, it seems to be a question of whether NSU can be "tricked" into reading phone so that software can be re-loaded.
It appears to have worked on an N70, N73 and N93 so far apart from loss of data unfortunately!
It may however be a small price to pay if you have a "bricked" "N" Series and a visit to a Nokia Service Centre neither practical or feasible.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Phone update problem

    My phone update downloading has stopped on o% & i cant re download it. How can i solve this?

    my nokia 2700classic multimedia is not working

  • Software 5 update problem with keyboard lock key

    I just downloaded the software update v5 and when it was all done my keyboard lock key stopped working, has anybody else had this problem? any solutions other than a downgrade?

    I also have this problem after installing version 5.0.0.508. It appears that I no longer have an option for locking the keyboard. When I select Options/Screen/Keyboard and select Left Side Convienence Key Options it does not show up in the list of selectable options.

  • I pod touch software 2 update problems

    Can anyone help I have just tried to update my ipod to the version 2 software this started last wednesday. It downloaded ok but then I tried to update it goes throught the motions but then once you have pressed update it tries but comes up with error1611. I have tried to restore and update several tomes with no joy .The ipod went back to apple came back with version 1 software onit. I plugged it in to my pc connected to itunes and hey presto it has started agin when I tried to update, Anybody any ideas?

    Yours is a iPod Touch 4th generation with 8 GB storage. Yes, it's possible to update to 5.0.1. Do you have the latest iTunes 10.5.2? Update iTunes and do a restore.

  • N80 UMTS phone call problems after 20 minutes

    When I call someone over G3 (UMTS), everytime after 20 minutes the other person could not hear me anymore.
    I have replaced my 6680 with N80. The 6680 had not this problem.
    Could someone confirm this problem? Otherwise my N80 need a repair.
    Thanks in advance

    Which firmware & network?
    Also are you staying in the same place during the call, or moving around? Signal strength?
    Orange Handsets : Nokia 51 > NK702 (6130) > 6210 > 6310i (silver)> 7210i > 6230 > 6230i (silver) > N80 (silver) > N95-1
    T-Mobile: N96

  • N80 software update problems

    I'm having a nightmare trying to update the software! Just bought this N80 on ebay and everytime I try to send a text the phone freezes. It won't turn off or anything, so the only thing I can do is to take the battery out. When I restart it, it hasn't sent or saved the message. I checked the sftware and it's 3 years old.
    I have spent hours & hous trying to update it and got nowhere! First of all I didn't have a USB cable, so bought a USB cable, but it didn't seem to work. I cleaned the contacts and it's now working, but I can't get the software to update. I'm getting this message:
    Configuration error -Nokia has detected a configuration error. Configuration error
    There are a number of possible solutions for configuration errors.
    1. Please make sure your firewall and anti-virus software settings allow Nokia Software Updater to function.
    The Nokia Software Updater applications can be launched separately, connecting directly to the Nokia servers. If there is a firewall between the Nokia
    Software Updater application and Nokia's servers, the firewall needs to be configured as follows:
    Port 62716 over TCP: Used for communication between Nokia Software Updater and Nokia Services servers.
    Application nsl_host_process.exe: Used for connection between Nokia Software Updater and Nokia Services servers.
    2. Check whether the ports used by NSU are in use by other applications.
    Nokia Software Updater uses port 62716 over TCP. You can perform a port scan on machines, specifying predefined port ranges. One port scanning application is FreePortScanner, which you can download by following this link. This tool uses TCP packets to identify available hosts and open ports, services associated with these ports, and other important characteristics.
    Step 1: Close Nokia Software Updater.
    Step 2: Run the FreePortScanner application.
    Step 3: Specify the following scan parameters:
    In the IP Address field, type the localhost address 127.0.0.1
    Make sure Show Closed Port is not ticked
    In TCP Ports, enter the range 62700 - 62750
    Step 4: Press the Scan button.
    You will be provided with a list of all open port numbers on your machine.
    If port 62716 is being used by another application, you should change the port number to range 62700 to 62750.
    Step 1: Click Start, selecting Run.
    Step 2: When the Run dialog box appears, type \Program Files\Common Files\Nokia\Service Layer\A and press the OK button or ENTER on your keyboard.
    Step 3: Edit the file nsl_config.cfg in Notepad.
    Step 4: Replace 62716 in the line <root_port>62716</root_port> with an unused port number from the range 62700 to 62750.
    Step 5: Save your changes and close the file.
    Start Nokia Software Updater.
    3. Disable network connection sharing (administrator rights required).
    Step 1: Click Start in the taskbar and go to Control Panel.
    Step 2: Click Network Connections. In the new window that opens, select your network connection. This can be a dial-up, Digital Subscriber Line (DSL), or cable broadband connection. Right-click your network connection's icon, scroll down, and click Properties. Then click on the Advanced tab.
    Step 3: Untick the box next to Allow other network users to connect through this computer's Internet connection, in the Internet Connection Sharing section.
    Step 4: Click OK > OK to close the Control Panel window.
    4. Reinstall the Nokia Software Updater application.
    Can anyone help? Cheers!

    Also everytime I turn my PC on, I get a Found new hardware wizard message. When I go to add new hardware, it never works and I get this message: Cannot start this hardware.   There was a problem installing this hadrware -Nokia Windows portable device driver. This device cannot start (code 10).  I've chekced my Forewall and thats all OK, but it lets me know anyway before blocking anything.
    Can no-one help? If I can't sort this I'm going to have to send the phone back and maybe open a dispute on ebay, but I ned to do it soon, as it's beena few weeks since I got it, as had to wait for a smi card, then the USB, then seberal days of trying to sort this out!

  • I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

    I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7.1.2 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

    I have the same issue on my iPhone 5s
    I've closed the app and re-booted the phone several times but it did not resolve the issue.
    Upgrading to iOS 8.0.2 did not resolve it either.
    Erasing the iPhone and restoring from a backup did not resolve it.
    I'm not sure what else to do.

  • I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Wil

    I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Will this resolve my issue?

    any advise..?

  • Blackberry desktop software cannot update my error 507 9800touch phone

    my blackberry desktop software cannot update and load an os to the phone. i have error 507 which means there is no os on my phone as i read somewhere. but the problem is.... i have tried all the intruction on the solution on error507 but to no avail. the device software alwas says " "There is no  BlackBerry® Software available." with Cancel, Update and Retry option. If I choose to Update the software it will say that no software is available... i even tried downloading the os6 for my fone and used the loader but it gets stuck at the last process with the same message "There is no  BlackBerry® Software available.
    i have read around but no solutions. please help as am desperate

    Hello,
    Please check carefully these instructions, most importantly the part about deleting VENDOR.XML file(s).
    1) Uninstall, from your PC, any BB OS packages
    2) Make sure you have the BB Desktop Software already installed
    http://us.blackberry.com/apps-software/desktop/?lid=us:bboftwareesktopSoftware&lpos=us:bboftware
    3) Download and install, to your PC, the BB OS package you desire:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    4) If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    Now, use this process:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    freexrythem wrote:
     "There is no  BlackBerry® Software available." 
    Most often, that message is the result of one (or more) of the following:
    There is no BB OS package installed to the PC, and there is nothing available from the carrier (as represented by the VendorID hardcoded into the device)
    There is a BB OS package installed to the PC, but it is from a different (per VendorID) carrier, and the VENDOR.XML file(s) have not been deleted (which causes the installed package to be ignored)
    There is more than one BB OS package installed to the PC...which can confuse the Loader tool
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Ovi suite 3.1.1.85 software update problem

    Hi!
    I've got a problem with software update. All the time when I want to make an update ovi displays message "A new software to manage your phone was downloaded, you must reboot your computer". I rebooted it a few times but nothing changes reinstalled ovi suit but nothing changes too.  What should I do ?
    Sorry for my English

    For the first advice : nothings change
    For the second advice: nothings change too.
     I update ovi suite - nothing , I repair suite - nothing , I uninstalled ovi suite exactly as in anttih link - nothing. Ovi suite all the time wants to be rebooted when I I want to update my phones software. I rebooted PC a few time but nothings change, I all the time can read that the software was updated and I need to reboot PC. I attach a print screen but it is in polish.  Any other advices ? 
    Attachments:
    message.JPG ‏45 KB

  • Problem in 5300 Phone Update over air

    Hi friends,
    I own nokia 5300 and tried to update my phone's software version over air. I tried to SETTINGS->PHONE->PHONE UPDATES->DOWNLOAD PHONE SOFTWARE..I got a message saying that "No settings Found. Contact your service provider". Then i read the user guide of 5300..It says i should change the setting in SETTING->CONFIGURATION->DEFAULT MANAGEMENT SETTING...But i could not find any setting in configuration setting..Moreover my phone's internet setting is activated and im surfing all the websites too..Can help me what should i do...
    Thanks in advance

    FOTA is a fairly new feature and to be honest it doesn't work very well. Some networks also block this feature for some strange reason.
    You can still update using a PC & data cable or by visiting a nokia care point.
    If your phone is working fine and you are happy with it then I suggest that you do not update it. Some recent updates have caused more problems than they have solved.

  • E51 - Software Update Problem

    Hi!
    I own a Nokia E51 and I've been having some problems with the software: from time to time, whenever I received a text message I couldn't open it using the phone's "desktop" (the cascade menu). I was told that it might be a sofware problem and that I shoul reinstall my software, so I backed up my data downloaded the last version of Nokia softwareupdate and got to work.
    As I was using the Nokia software update to reinstall the software my Spyware Terminator software prompted me a couple of times and I hit allow every time. After that I got a message from Nokia software update that it had lost contact with the phone and that I should take my battery out and retry. I followed all the steps there (the last step was to press the power button for one second) and hit retry and it's been updating for two hours now. The thing is that I can't see any progress on that update bar (the white and blue is moving as it were working) and there's no "time left" displaied either. I've shut down both my antivirus and antispyware software. 
    What I would like to know is what I should do now: keep waiting and if so for how long? I only disconnected the phone when the software told me to and what's really bugging me is that it doesn't seem to be on (I mean I took the battery out and pressed the power button for one second and that was it). There's no blinking on the screen or anything. The phone looks dead and the software just tells me that "the software is updating and that I should wait". Is it actually updating or just working in a loop? Should I reboot and try again?
    I really don't want to think that I've lost my phone because of the Spyware Terminator meddling.
    So, any thoughts on my problem?
    Great many thanks,
    Robert
    Solved!
    Go to Solution.

    Thank you for your help.
    I had read the FQ, but not the extended one with the option to format the phone using the three keys combination.
    I manged to format it then I restarted my computer, shutdown the antivirus and antispyware, reinstall the software, and restore the backup date from my memeory card. It all went well and took about 10 minutes.
    I just hope that I won't be getting that error again. By the way does anyone have any idea if it actually is a software thing or everything I did has been in vain. As I said, when I get text mesages, i can't open them using the cascade menu on my phone's desktop. 
    Anyhow, great many thanks again,
    All the best,
    Robert

  • [Software Updates Problem for My Nokia 6131]

    Hi Everyone, My name is Wilson And I am from Singapore.I am here to ask about the software updates,which my country do not have support for it.That why i need help for my nokia 6131. Firstly, My nokia 6131 show some problems for E.g "when i type #0000#" it show an "Unknown APPLICATION"
    Secondly,I follow the software guide, to no avail. I found out that in my settings > phone > phone updates it show only 2 things --> "Current Software Details and Install Software update".But my handphone version is V03.70.Lastly, i would to request if anyone or staffs would send me the file directly or help me step by step. I will appreciate anything you have done and i would to say Thank You Very Much
    Good Bye =)

    I got another question for this ---> Secondly,I follow the software guide, to no avail. I found out that in my settings > phone > phone updates it show only 2 things --> "Current Software Details and Install Software update".
    My Nokia 6131 Version 3.70 but whenever i played a java games it will die out and when i turn on my phone and play the same game it also die out. But all my friends does not have this problems except me =( .Btw there is one game it ask me to "Press any key to continue" When i click any key im stuck there, it doesnt lead me to the welcome page it just hang there ---> "Press any key to continue"Message Edited by takashix on 19-Sep-2006
    11:42 PM

  • Problems with software the update with Nokia 6233

    Problems with software the update with Nokia 6233
    Hello,
    I have so far some-paints tries my software to update.
    Each time the update procedure begins, sometime stands then on the telephone “test mode”.
    On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
    If I change my profile attitudes since that for example, then after a telephone restart again deleted.
    What there can I make?
    GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

    It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
    You need to take it to a nokia care point for repair under warranty.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • I have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?

    i have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?

    Because it says it's incompatible when it can't be, I got hope. I get error messages all the time with my iPod and iPhone that it cannot sync and that 'this device is not capapble of connecting to iTunes' stuff. I literally forget that happened, plug it in again and it works, I later realize that iTunes made a mistake, they do that.

Maybe you are looking for

  • How to display the error message during the web dynpro application runtime

    hi,     I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.     But when i do the s

  • Who can I automate the process of printing booklet?

    Who can I automate the process of printing booklet. I use a saved Print Preset named "A3 booklet" I supply page range 1-16 then print as pdf using PDFCreater. File Name as 01.pdf, then pages 17-32 as 02.pdf and so on. I am aware that InDesign provide

  • XLST Transformation in JSF

    Hi Would appreciate a point in the right direction with transforming XML/XSLT from a JSF view usinfg TOMCAT and jwsdp-1.6. I can't decipher the stack trace java.lang.Illeg alArgumentException as being a bad invocation or bad file input or both. A cou

  • Using logarithms in abap programming

    Hi Everyone, Is it possible to use logarithms in abap, can anyone please let me know. If so a simple example like nloga = logb To solve this how do program it, Any help will be of great use to me. Thanks, Prashant.

  • Xp20:format-dateTime with milli seconds always as zeroes

    Hi All, I am trying to use the xPath function format-datetime , but in the output factional seconds is returning all zeroes. My picture string looks like below. *xp20:format-dateTime(xp20:current-dateTime(),"[H01][m01][s01][f001]* Result always in ze