N80 text sending time issues

my n80 takes ages to send a text, like 5 mins, and seizes up whilst sending so i can't do anything else, is this just my phone or a common issue? it also switches itself off and on and it just a bit odd sometimes but i can live with that, just want to be able to send a text in less time!
i would tell you what firmware i have but its sending a text lol

I have never had problems with sending sms's or the phone crashing. I recently updated my firmware to V 5.07 and everything seems to be working fine. You could try updating too.

Similar Messages

6280 - Time issue (please help!)

This message has come up before but mine is still not working. When I receive a text, the time it is received is an hour behind, the same thing happens for a missed call. This is my third Nokia phone and one has already been sent to get fixed because of a range of issues. I have a new sim card aswell so its not that.
Any help appreciated.
Regards,
Shazia

27-Apr-2006
05:31 PM
rufao wrote:
unfortunately mobile phones take the time from the message - they do not generate the time stamp themselves.
in the UK the stamp will be applied to the message at the time of sending, sms is very similar to email in the way they are packed up for transmission.
again, if it were the phones - they would all be affected. instead there are only a few people here with this issue.
this is correct, maybe the networks are applying more than one time stamp? or in the case of the message starting on one network and finishes on another - if more than one stamp is present i guess its possible that the wrong one is used. i would suspect the phone uses the one it thinks is right - but of course if that one is the incorrect time you will see them go back an houre etc.

Time issue- urgnt

HI Expert !
I m using this code .
LTIME TYPE SY-UZEIT
T1 TYPE SY-UZEIT VALUE 030000,
T2 TYPE SY-UZEIT VALUE 050000,
BUT WHEN I M USING T1 AND T2 in loop ( if statement ),ITS value r
T1 = 082000.
t2 = 131100 .
if t1(6) t2(6 )
ltime (6 ).
then ok . but in this i wont be able to make comparison in if statement
how i can resolve this time issue
i dont want to include timings between 3.00 a.m and 5.00 ,
for this i have used this code but its not updating data for any employee , is this code correct or not.
OPEN DATASET PA_FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET PA_FILE INTO REC.
CLEAR WA_PUNCHES.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
WRITE: / REC.
if NOT ( WA_SCORE-LTIME GE T1 AND WA_SCORE-LTIME LE T2 ) .
AND
***( WA_SCORE-TERID NE TR3 AND
***WA_SCORE-TERID NE TR4 AND
***WA_SCORE-TERID NE TR5 AND
***WA_SCORE-TERID NE TR6 AND
***WA_SCORE-TERID NE TR7 AND
***WA_SCORE-TERID NE TR8 ) .
WA_SCORE-PERNR = REC+0(8) .
WA_SCORE-LDATE = REC+9(8) .
WA_SCORE-LTIME = REC+18(6) .
WA_SCORE-CANID = REC+25(8) .
WA_SCORE-TERID = REC+34(4) .
APPEND WA_SCORE TO IT_SCORE.
ELSE .
EXIT .
ADD 1 TO COUNT.
ENDIF .
ENDDO.
plz help me . its very imp. program .
thanks

Hi,
Pass values in quotes
T1 TYPE SY-UZEIT VALUE '030000',
T2 TYPE SY-UZEIT VALUE '050000',
Can you please check once again after making this change in debug mode, values of T1, T2 and LTIME.
ashish

Time issue seems odd to me

I put a secondary domain and po at a remote location - running 8.03 on Sles/Oes and moved all of the "local" users to that po.
while everything seems to run ok we have a weird time issue.
Mail into and out of the new mailboxes shows a three and a half hour time difference both in the date column in the groupwise client and in the printed header of the email.
The odd thing is that if I go to the properties of the email - the Creation date and the File date and time are both correct.
I can't see any time issues with the servers (primary or secondary) and especially something that would be 3:30 minutes off
there is a timezone difference between the pri and sec but that's just 1 hour.
Any thoughts?
As a workaround I have had my users add the creation column to see when they actually received the email as our clients have time critical projects.
Thanks
Dennis

Danita,
Thanks for the reply - Oh how I wish it were that easy - I've checked and double checked the PO object and the domain object - both say US eastern time.
If I send email from a mailbox on the secondary to the primary - everything is correct (a 1 hour time difference - Eastern to Central)
If I send mail from a mailbox on the primary to the secondary - it shows up right away, but says 3:30 minutes later than it should (in Date/Time, but not in Created)
If I send email from a mailbox on the secondary to a GMail account - the header shows the 3:30 offset, but the properties of the mail shows correctly.
I would be happy to send email from that po to anyone that wants to see for themselves.
Other than the PO Object and the DOM object - Where should I be looking for a time difference
and how would it be getting UTC minus 30 minutes - - Is there a special timezone out there for Hy Brasil?
The workstations all get their time settings from "time.windows.com" the windows default.
Thanks for looking into this - I just hope that I can get it figured out because as small of an issue that I think it is (they get their email, it just looks like it gets read before they officially receive it)
but it seems that this office uses the received time to track how long it takes them to do their work.
Dennis

Real time issue

Hi all,
Can any body plz send me some FICO real time issue on [email protected]
and plz tell me hw shld I prepare for interview
Thanks & Regards
Vaibhav

Hi Balraj,
In the normal practice, developers will try to find the similer infocube (as per the requirement) in the Business content. But always you will not be lucky to find such infocube in Business content. You need to create at your own to suite the business requirements. Regarding the characteristcs & key figure, it 's again depend on the requirements. Calculated object can be assign as key figure like. Sales qty, revenue & net sales etc. where as Dimesion (characteritcs) will be purely depends on the reporting point of view. Like Customer, Material & Sales Document type etc.
Hope this will help you !
Thanks,
Sanjiv

Execution Time Issue

Help Please!!!
I've been searching for an execution time issue in our application for a while now. Here is some background on the application:
Collects analog data from a cDAQ chassis with a 9205 at 5kHz
Data is collected in 100ms chunks
Some of the data is saved directly to a TDMS file while the rest is averaged for a single data point. That single data point is saved to disk in a text file every 200ms.
Problem: During operation, the VI that writes the data to the text file will periodically take many hundreds of milliseconds to execute. Normal operation execution times are on the order of 1ms or less. This issue will happen randomly during operation. It's usually many seconds between times that this occurs and it doesn't seem to have any pattern to when the event happens.
Attached is a screenshot of the VI in question. The timing check labeled "A" is the one that will show the troubling execution time. All the other timing checks show 0ms every time this issue occurs. I simply can't see what else is holding this thing up. The only unchecked subVI is the "append error call chain" call. I've gone through the heirarchy of that VI and ensured that everything is set for reentrant execution. I will check that too soon, but I really don't expect to find anything.
Where else can I look for where the time went? It doesn't seem to make sense.
Thanks for reading!
Tim
Attachments:
Screen Shot 2013-09-06 at 9.32.46 AM.png ‏87 KB

You should probably increase how much data you write with a single Write to Text File. Move the Write to Text File out of the FOR loop. Just have the data to be written autoindex to create an array of strings. The Write to Text File will accept the array of strings directly, writing a single line for each element in the arry.
Another idea I am having is to use another loop (yes another queue as well) for the writing of the file. But you put the Dequeue Element inside of another WHILE loop. On the first iteration of this inside loop, set the timeout to something normal or -1 for wait forever. Any further iteration should have a timeout of 0. You do this with a shift register. Autoindex the read strings out of the loop. This array goes straight into the Write to Text File. This way you can quickly catch up when your file write takes a long time.
NOTE: This is just a very quick example I put together. It is far from a complete idea, but it shows the general idea I was having with reading the queue.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Write all data on queue.png ‏16 KB

Nokia n80 cannot send or receive sms..

my nokia n80 cannot send or receive sms... it can send messages to the network operator(globe) but when i try sending a message to anyone in my phonebook, it says in the outbox: "resend in..(a few minutes after i press the send button)" please help me.. its my first time to encounter this problem.. sorry if my english is bad.. thank you.

Don't use ALL CAPS on post, online means you are SHOUTING and is very RUDE.
SMS is a carrier service, talk to your carrier.

Real time issues faced during Sap Implementation.

Hi All,
Please let me know some real time issues faced during SAP end to end implementation. Hw did u get over the issues.
Issues faced during Production Support.
I have an F2F interview. Please help me out.
Regards,
Somya

Hi,
This is Srinivas If u dont mine can u help me in Sending me the solutions to me what type of issues we will face in sap/bw implementation like issues and defeacts can u send to my mail [email protected] can u give me solution for error9,error8,return8 can able to plz help me .
Regards,
Vasu.

Supernova 7610 - Text received times

When I send texts the time sent shows correvtly, but the received is 1 hour behind.
Ive looked on here and its says to change the setting etc which Ive tried but I cant get the time sent and time received to both be correct, its one or the other.
Someone help, its driving me mad!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

you may try checking the time zone.

Iphone 4s with ios 8.1.1, imessage gets slower than ever, sometimes even deliver after 10 min, was not like this with the previous ios, how can I improve imessage sending time?

iphone 4s with ios 8.1.1, imessage gets slower than ever, sometimes even deliver after 10 min, was not like this with the previous ios, how can I improve imessage sending time?

Hi there skmonirul,
Welcome to Apple Support Communities.
From what I gather, iMessages are taking longer than expected to send on your iPhone 4s. If you aren’t seeing issues with other apps, try restarting your iPhone as shown here:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If the issue persists, try restoring your iPhone as shown in the article below.
Use iTunes to restore your iOS device to factory settings - Apple Support
So long,
-Jason

How to send timer job email to "assigned to" feild value in a task list?

Hi All,
How to send timer job email to "assigned to" field value in a task list if due date is after two days from now?

Create a SharePoint Designer Workflow and use "pause until date" option when an new item is created/update.
Using Server Object model, I believe you can create the timer job from item event receiver.
--Cheers

Time issues? time zone settings appear in two places

If you leave the default "set time and date automatically", you see the time zone support below and you can check it or uncheck. You can then set your time zone there. But if you uncheck the automatic date and time, you get another time zone choice and the default is Cupertino, of course. I wonder if that's the problem with some of these time issues.
I've since unchecked automatic date and time, set my city's time zone, then rechecked automatic. The only weirdness I've seen was with an excel spreadsheet where the time was correctly shown on my mac, but not on the iphone. Unfortunately I don't have that sheet anymore or I'd try again to see if it works now.
Just a thought.

I noticed the same thing and did the same thing you did because my time was off by several hours each time I turned the phone on...after it being off overnight. When it was off by only 1 hour I could turn the Auto OFF then 'tap' the timezone (already set to the correct city) and the time would instantly correct itself. Then I'd turn Auto back ON.
Turns out that my time issue was related to having the SIM PIN enabled. Once I disabled that, the time's been correct every day.

Real time issues

hi there,
can any one share some of the issues that have been dealt with in real time. i.e.during blue print stage, <b>especially in realisation stage</b>, final preparation stage
puhlease answer this question immediately

Hi Medasani,
Real time issue you can get it from the Sap support consultants. Hence, getting all the information is very difficult.
In what basis you are asking let me your requirements.
For Example :- Tolerance limits is has to increase to Rs.1 to Rs.100. for employees and vendor / customer. This is the issue from client.
How you will decide that to increase.
First you should understand the clinet work flow and get the approval from client end (core Team) then you have to increase meanwhile you have to decide the % also.
Oba3 /Oba2
Warm Regards,
Sivakumar Sathiyamoorthy

Query performance analysis in RSRT --- event text 'Wait Time, User' means?

Hi All,
I am running some queries in RSRT in 'execute + debug' mode.
selecting 'statistics data for query' option.
Statistics says that most of the time is taken by the event 'Wait Time, User' (event text).
handler type is OLAP or DFLT depending on the query.
This is taking around 90% of the query run time.
Can any one tell me what it means ? Where is it actualy taking time?
What does it mean by :
Event text --> 'waiting time, User'
Handler type DFLT
Handler type OLAP.
A sample record of the statistics:
4A2Z2CFA1GLIRPIK9O2Z18GK1 4A2Z2SN22IFE3AKOL50W9DQZ5 BEX3 2 ZS233BIWDEV 11.06.2008 19:29:08 DFLT 2 1 Wait Time, User 98.467887 0 1
Thanks in advance.
rgds,
Raghu.
Edited by: Raghu tej harish reddy on Jun 11, 2008 4:19 PM

Thank you for your immediate response.
But i won't think it is the time taken to enter the values in the variable screen because of two reasons:
1.There are some events starting before these events(i can say by seeing the starting time of the events)
2.For some queries this time is around 3 minutes; and i hardly take 30 seconds to enter the variable values.
Thanks,
Raghu

[SOLVED] Yet another time issue...

Hi there,
I'm having some crazy, hair pulling, head banging UTC time issues on both my dual boot (Arch & Windows 8) desktop and single boot laptop.
I've been searching and following a mulitude of old threads and the official Wiki guide, however, I simply cannot get UTC time to stay correct between reboots. I've installed Arch a fair few times now, both before and after the switch to systemd and in dual and single boot setups and have never had time related issues like this before...
Here's a run down of the whole sorry story....
Fresh install - set time with hwclock --systohw utc as suggested in the beginners guide.
First boot - time an hour out - huh? cat /etc/adjtime and ls -l /etc/localtime - everything as it should be... UTC and symlink to /usr/share/zoneinfo/Europe/London. Nonetheless I duly follow the Time guide on the wiki, get to know timedatectl a bit, and soon after, time is set to be correct. Great.
Reboot. Time an hour out. Whaaaa??. Start googling, finding a plethora of bbs links to others with similar issues, decide to use NTP. Install, ntpd -qg. All good again. Time right. Phew...
Reboot. Nope. Arrrrgggghhhh. (Bare in mind - at this point I haven't even booted the Windows 8 disc, and I went through the exact same process on my Arch only laptop...)
More googling, thread reading. Find out that hwclock and ntp might be in conflict. Delete /etc/adjtime, reinstall tzdata, re-follow Time article to the letter and reenable NTP to start at boot.
Reboot - time is foward an hour yet again. Bang head repeatedly on desk. Then suddenly - 10 mins or so after boot - NTP kicks in, and time is magically goes back an hour to the correct time! Surely NTP should be doing this early in the boot process, not 10 minutes after? But OK, at least something is happening...
Next I dare to boot into Windows, and yup, time an hour out. Expected, but frustrating nonetheless. Add the registry tweak as suggested in the guide, and turn off the Windows time synchronisation. During which I noticed that Windows 8 time is set to UTC by default, not localtime, which is what the wiki says. Is this a Windows 8 thing?
I can't help thinking, that if this is the case, and the Wiki advise is written under the assumption that Windows time is always localtime, that perhaps this is the route of my problem....
Anyway, Windows time all good now, reboot Arch, time again wrong untill NTP finally kicks in - sigh. Reboot to Windows. Time an hour back. Gaaaahhhh - WTF?!! reset it to be correct. Try again. Same thing. Oops, forgot to mention that on each reboot, I check the BIOS clock, which remains persistently correct during the whole debarkle...
Ok, so I try without the registry hack and turn Windows sync back on. Still fucked. I try various combinations of the two, I try resetting Arch time over and over again. With NTP - late sync. With hwclock only, or both hwclock & NTP - totally fucked! Eventually, I give up on UTC in Arch, set it localtime, delete registry key, turn Windows time sync back on, and thus far all good......
TL;DR - couldn't get hwclock to set UTC time correctly across reboots. NTP worked (sort of), but after each reboot it would take ten minutes for the time to sync and the clock to move back an hour to the correct time. Localtime just works...
My question is - why is the wiki (and the timedatectl status output for that matter) - so adamant that we should use UTC? From what I can gather, as long as I boot Windows around the DST time. or manually move the clock forward or back an hour - all should be well, no? Or are there other issues that I may run into that I've missed? The thing I'm most concerned about is data corruption due to timestamp issues...
Also, why does the wiki repeatedly say that Windows uses localtime, when this doesn't appear to be the case in Eight? Does the wiki need updating or is Windows lying to me? I know which I'd put my money on ;-)
Finally can anyone explain why my time was always an hour forward after a reboot, even when the time was set correctly before, the BIOS showed the correct time, and NTP was in use?
Sorry for the crazy long posting, but this issue has been driving me totally batty!! Any light-shedding greatfully appreciated :-)
Last edited by knowayhack (2013-08-10 15:24:09)

Ok, so I set the clock back an hour in the BIOS, booted Windows - time right - YAY.
Rebooted Arch - time right. OMFG - pure joy!!!
I have to say, I still find it odd that this is how it works, and would like to confirm that things are looking as they should in the output from the following commands....
toby@archy ~ > timedatectl status
Local time: Sat 2013-08-10 15:42:56 BST
Universal time: Sat 2013-08-10 14:42:56 UTC
Timezone: Europe/London (BST, +0100)
NTP enabled: n/a
NTP synchronized: no
RTC in local TZ: no
DST active: yes
Last DST change: DST began at
Sun 2013-03-31 00:59:59 GMT
Sun 2013-03-31 02:00:00 BST
Next DST change: DST ends (the clock jumps one hour backwards) at
Sun 2013-10-27 01:59:59 BST
Sun 2013-10-27 01:00:00 GMT
toby@archy ~ > sudo hwclock --debug
sudo: timestamp too far in the future: Aug 10 16:39:24 2013
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
[sudo] password for toby:
hwclock from util-linux 2.23.2
Using /dev interface to clock.
Last drift adjustment done at 1376148264 seconds after 1969
Last calibration done at 1376148264 seconds after 1969
Hardware clock is on UTC time
Assuming hardware clock is kept in UTC time.
Waiting for clock tick...
...got clock tick
Time read from Hardware Clock: 2013/08/10 14:43:20
Hw clock time : 2013/08/10 14:43:20 = 1376145800 seconds since 1969
Sat 10 Aug 2013 15:43:20 BST -0.953640 seconds
Is it OK to now reinstall NTP to keep the clock in sync on Arch, and are the Windows reg tweaks still necessary on Windows 8?
Thank you guys SOOO much for all the unbelievabley speedy help on this issue - you have no idea how much this has been stressing me out!!
Last edited by knowayhack (2013-08-10 14:54:31)

N80 text sending time issues

Similar Messages

Maybe you are looking for