N80 very very bad

hi guys , i just want to tell anyone who wants to buy n80 just one word , DON"T . this mobile is a failure in all means . here in kuwait it is officially the worst mobile of 2006 . useless camera and sooo bulky , bad battery life , if i live in america or finland , i would sue nokia for putting the cheapest optics for a device that is supposed to have 3 megapixel sensor , can they tell me what can i do with this sensor without proper optics ???? sooo many topics discussed video quality of n80 but we hear no response from nokia , i think they know that they can do nothing about it , no new firmware no nothing

Sorry - I meant the N90 and N93 - the 2 clamshells that twist out to look like kosher video cameras.
I've read that the N70 takes better pictures and video than the N80, despite having a lower pixel count. There is a rumour that the image quality of the N80ie is better because of some firmware change (different compression algorithm?): be interesting to know if the N80ie can compete with the N70 or whether the N70 just has a better camera.
The reason I didn't suggest the N73 is that I don't think it has autofocus, so even though it has a high pixel count, the picture quality is never going to be perfect. I would therefore say that the N90 or N93 would be a better bet if your main priority was picture quality.
A few points about taking pictures with the N80, though:
- it's really easy to have the macro/normal lever in the wrong place as it moves so easily - you have to check it's in the appropriate position before every picture
- because there's no lens cover and the lens is precisely where your fingers go when you hold the phone, the plastic tends to get a lot of smudges on it that need to be cleaned off before each shot
- stability is a big issue because there is no image stabilistation and you're not using a view finder - try bracing yourself against something
- the actual picture is taken seconds after the "click" so you often find you or the subject have moved before the image is actually captured
If you bear these things in mind, it can make a dramtic difference to the pictures you get.Message Edited by patc on 05-Feb-2007
02:15 PM

Similar Messages

When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

Photoshop CS4 very very bad brushes sensitive for Wacom Cintiq!

Brushes sensitivity Photoshop CS4 with wacom Cintiq very very bad,dont sensitive, all the same problems have my friends.Photoshop CS3 no such a problem very good performing for cintiq.What happens to Psd CS4 we are dont buy.And you doesn't say me alll the Update track,i do.

Photoshop CS3 and CS4 is working fine with Cintiqs for Adobe, Wacom, and most of our users.
Are you sure you've updated the Cintiq drivers?

Iphone 4 S 64 gb. Welcome screen problem! Could not open. Very often calls dropped down! Very often bad or no signal.

Welcome screen was very big, buttons was hidden. Could not open. Also very often calls dropped down! Very often bad or no signal.

so... my out of warranty iPhone 4 power button stopped functioning all of a sudden and it also no longer made that "click" when pressed.
As I already said, it's already out of warranty. This is actually my 2nd iPhone 4. Apple replaced my previous because of a faulty home button. Now my "new" phone has a faulty power button. This phone is of course out of warranty because it's been over a year.

BADI(very very urgent)

Hi all,
i got the badi for post goods issue but in which TRANSACTION, i have to use this badi.i am new to badi.plz tell me , how can i use the LE_SHP_GOODSMOVEMENT.
plz tell me the procedure to follow?
it is very very urgent.i will reward the point.
Regards
pabitra

Hi gudia,
Thanks very much.i am really sorry because i have not replied u till now.i am very busy with other issue.so i forgot to open this mail.
anyway, my mail id is [email protected]
my gmail id is [email protected] will be always online in gmail messenger.plz give me some message to my gmail messenger so that i will give u instant reply if i will be in office.
plz describe me clearly so that i can solve that issue using BADI.
i have set some 20 break points in that program while pressing the post goods issue button in delivery(VL02n).but control is not going to that program.plz suggest me details.
Thanks very much for ur help.waiting for ur reply.
Regards
pabitra

Please send me afree iphone cause i cant get it and im very very bad please give my any version 00201201905055 thx apple

please send me afree iphone cause i cant get it and im very very bad please give my any version 00201201905055 thx apple

ahmed haron wrote:
But you know I asked this request, but I began to lose my mind because of the passion for this phone, which I can no longer its procurement of new...........
This is an Apple products technical support forum. If you are having mental heath issues, please consult a medical professional.

TS1398 since i have updated the latest software i am facing problem using wifi which is very very slow most of the time or wont connect at all was that update supposed to be for better or worse

is apple product going down hill it seems their updates are creating a lot of problem now the wifi connection is really ******* me off it doesnt connect or even if it does its very very slow i used to love using iphone but i think its time to move on to something else they have taken everyone for granted

Welcome to Apple Discussions, Mark.
I've never come across your first problem on any of the Apple notebooks I currently own (or have owned in the past). Then again, perhaps I'm not looking close enough.
Have you compared it with any other 12" PowerBook? If not, perhaps you might be able to try that at a local store with units on display.
Otherwise you might want to give AppleCare a call. Alternatively, if you have an Apple Store or Apple Authorised Service Provider near you (I don't know where you are located) then you can take it in to be checked.
As for your second problem (uneven illumination), that has been known to afflict other notebooks. My own 15" PB has had its screen replaced on two occasions because of this. Depending on the severity, you might be able to get it replaced. Mine became so bad that the screen was effectively unusable.
To be honest, here in the UK, I would actually try for a replacement PowerBook - if the problems were severe enough and also because your PB is still very new. However the consumer laws in your country (wherever that may be) might be very different to mine.

I run a Mac Mini 10.6.1 and a G5 10.4.11 - they share a screen. Yesterday the contrast on the Mac Mini went mad. Very very heavy contrast and now its impossible to retouch with Photoshop as I cannon judge the colours accuratly. The G5 is fine. John UK

I run a Mac Mini 10.6.1 and a G5 10.4.11 - they share a screen. Yesterday the contrast on the Mac Mini went mad. Very very heavy contrast and now its impossible to retouch with Photoshop as I cannot judge the colours accuratly. The G5 is fine. I keep the screen image I get on the G5 good and accurate with Huey. I believe I cannot use this with the "Intel Inside" Mac Mini. Does anyone know how I can restore the great screen image I got up to yesterday on my Mac Mini? Thanks. John Suffolk England.

Likely caused by one of the following: a bad cable, maybe a bad connection or (my guess) bad graphics hardware.
To rule out the software, see if booting from an installer DVD shows better color.
Swap the cables and check the connections.
Then call your hardware support provider.

MacBook Pro (13-inch, Mid 2010) VERY VERY VERY Slow

Hi Folks,
First, let me start to say I am an IT Professional by trade and know a thing or two about fixing PC/Macs, but this one is stumping me. A friend has a 13-inch Mid 2010 MacBook Pro that started to run very very very slow. I figured it was just a bad mechanical drive and figured swapping it out with a new SSD would be the fix. Well, that didn't work and I couldn't even partition the new drive. I figured maybe I had a DOA drive, so I connected the new drive via a SATA to USB adapter to another Mac and a PC and it runs great. I researched the error I got during formating and it was recommended to replace the SATA flex cable. The part took about a week to arrive, so the battery fully died. I couldn't get the Mac wouldn't power up after replacing the SATA cable and I didn't get a charge light either. I figured OK, maybe I have a bad power cord, so I tried another and didn't work either. I can only get it to power up with a 85w charger, but it doesn't seem the battery is charing either. OK, so we have power but it's acting weird... and now I could format the drive. Thought that was it and I could call this one done. I thought the install was running very slow (maybe 15 minutes to preload all the setup files) but I still let the setup routine run over night. Woke up the next day and the setup was still running! I am running out of ideas what is going on with this MacBook Pro. Any ideas??

jmkalfut,
I have the same model MacBook Pro as your friend. Regarding the speed of the setup, one possibility is that the new internal SATA cable is also faulty. What I don’t understand is the logic in this part of your post:
The part took about a week to arrive, so the battery fully died.
Why would the time it took to deliver the new internal SATA cable be the cause of its battery fully dying? Since you’re currently able to get the MacBook Pro to run by using a 85 W charger, what information is shown about the battery in System Information when it’s running? Perhaps its battery needs to be replaced? Have you tried using a different 60 W charger, to see if the original charger needs to be replaced?

Material Number and Serial Number are not getting filled...Very very urgent

I have my code in the badi...CRM_EQUI_LOAD...method PERFORM_LOAD.In this i try to to create a component for the ibase using the function module... CRM_ICSS_CREATE_COMPONENT...The component gets created but the material and serial number are not getting updated...It is very very urgent..please help....

I am not sure what information you are passing in given FM.
But in my case I have used FM 'CRM_CREATE_IBASE_FROM_EQUI' to create Ibase and component. It creates IBase and Component along with other details like material number and serial number.
you may refer the below code for the same >
Call the standard handling for crm equi load.
call function 'CRM_CREATE_IBASE_FROM_EQUI'
 exporting
 is_header = is_header
 it_equi_dmbdoc = it_equi_dmbdoc
 changing
 et_error_segments = ct_error_segment
 exceptions
 technical_error = 1
 others = 2.
if sy-subrc <> 0.
 raise equi_load_badi_error.
endif.
Cheers,
Ashish

ITunes+QuickTime: VERY, VERY, DISAPPOINTED

I bought Ipod 30GB a few months ago. When i listen to IPod, I remember why did I spend so much money. But When I deal with the software side, I forget it!
The last bad joke, during the last ITunes upgrade. "There is a new version of ITunes, download it now!". Ok, I say. "You must install Itunes AND QUICKTIME". Ok, I say. Quick Time is useful anyway, so it's ok.
At the end of installation, surprise, QuickTime changed all my settings about media players, overriding all my choices. I tried to work out it from the quicktime preference. Nothing. At least, I found the problem In the Advanced Settings of Firefox (my browser) preferences, and now I have to change manualy every file association with image, audio, video files, because Quick Time took every file type. During the installation of QuickTime+ITunes, no message told me about this backgroun operation.
Now, I would like to say to Apple Marketing people, this is a very very bad and arrogant choice, because you must respect the time and the work of the people you made software for. Tell me why I have to spend half an hour of my time, repairing the damage I got from quick time? Who did give you the right, the permission to change my computer's settings? Do you think we are all teenagers with a lot of time to customize our computers?
I was already a little angry because i think ITunes, despite it's world success, it's a mediocre music manager - some lacks of playlist managment are ridiculous. Now, with this "violence" of the imposition of Quick Time, it's really too much.
The next "surprise", and I ll'sell my "cool" Ipod and goodnight!
Hope Apple People listen to my words, because I'm going to post'em on other forums and newsgroups.
Windows XP Pro

Hm, if I remember correctly, QuickTime asked me which file types to associate with, but I'm not sure. Perhaps there's some sort of custom install, I don't remember...
What are you missing on playlist handling? Imo, iTunes is a very comfortable Audio Player, not only for syncing your Music with the iPod, but also for managing music.
There is mainly one thing I would criticize, namely that you can't copy music from the iPod to the PC (did you know this? I hope I didn't give you the final reason to sell your iPod - in fact, there are ways to work around this issue), but I suppose that's because of the music industry.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.
First my organize has Exchange on 2 site like
site A (internet facing) : 2CAS 2 MB all are Services pack1
site B (DR Site , no user active on this site) : 2CAS 2MB all are Services pack 1
so today I upgrade Exchange 2013 from SP1 to CU5 start on "site B" and I found this issue and the details is....
When I open EMS on any CU5 for query something (like get-mailboxdatabasecopystatus) the response return very slow and some query will not return at all (like get-owavirtualdirectory).
But If I using EMS on SP1. Everything is ok then I try to use EMS on SP1 connect to CU5 and try to query something. the result is
some query command cannot return for any result that are server on siteB (just some query command)
Problem
EMS on CU5 return very slow result.
EMS on SP1 still ok.
Does anyone face this problem before for CU5??? Please help me figure this out. Thank you
reply from Social.technet

Hi,
Have you used the above cmdlets to check your Exchange server health?
"all other command that I ran on EMS didn't logged on event viewer.", my environment is the same with you. I use Exchange 2013, only errors will be displayed in MSExchange Management. Actually, it is not related to slow EMS response.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

UPDATE ROUTINE --- CUBE --- ODS Very Very URGENT

Hi Collegues/Friends ,
First I need to thank for the intiators of this site , as I came to know that for many
problems we will get different best solutions ... Hoping the same I am posting a question
which is very very very urgent as the client is running after me for this .
My Requirement is as Follows. ..
I Moving the data from Cube to ODS . While i need to write a routine for an extra field in
ODS based on Billing Quantity in Base Unit of Measure . The Key Field in the ODS Is UNIQKEY
Transaction and It is a Characterstic in the Cube and we have MAterial as another
Characteristic and core element as navigational attribute .
In the Cube for every UNIQKEY transaction- there are more than One line items.
My data fields in the ODS are Billing Quantity in Base Unit of MEasure and and EXTRA FIELD
: No of Items in Transaction . But the thing is that I have only Billing Quantity in Base
Unit of Measure in cube as a key figure
BAsing on the UNIQKEY transcation and Billing Quantity In Base Unit Of Measure I need to
populate the No of Items in Transaction... For this i need to write a routine .
Let suppose say that for the Materials the core elements are as follows
Material Core element
10 1 -- fuel -- In liters
20 2 -- Cigar - in PAck
30 3 -- Coke - in Cans
Now Lets see how the records are there in InfoCUbe
Uniqkey / Material / Core element /Billin Quantiy
A / 10 / 1 / 22
B / 30 / 3 / 2
C / 10 / 1 / 15
C / 30 / 3 / 2
D / 20 / 2 / 10
D / 30 / 3 / 2
And IN the ODS -- I need to Populate the No OF items in Transaction.
the Logic behind this as follows .
1.if Materail is of type 1(Mean if the core element - 1)
I need to Populate the No of items in tnx = 1
2.If Material id of type 2 or 3 I need to populate the billing quantity to the no of
transcations.
3. If the Uniqkey tanscation contains two line items as suppose that you have 20 litres of
fuel and 2 cans of coke, then No of Items in the transaction should be 3 and Billing
Quantity in BUoM 22
billing quantity in BUoM = 20 litres for the first line item and 2 for the second line
item...
then as the first line item is fuel, field No OF Items in the Transcation should be 1
(replacing the 20) + 2 = 3
so the final result in the ODS should be billing quantity in BUoM = 22 and The Items in the
Transcation = 3
For this I have Written a Rouinte like this for that field
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BI0/PMATERIAL.
DATA: TITEMS LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS,
 CORE_ELEMENT like /BI0/PMATERIAL-RPA_WGH1.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS8ZPOCTUS04
 RECORD_NO LIKE SY-TABIX
 RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS
 RETURNCODE LIKE SY-SUBRC "Do not use!
 ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
check not COMM_STRUCTURE-material is initial.
select SINGLE RPA_WGH1
 INTO CORE_ELEMENT
 from /BI0/PMATERIAL
 where
 material = COMM_STRUCTURE-material
 and OBJVERS <>'D'.
 IF CORE_ELEMENT EQ '1'.
 TITEMS = '1'.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
 EXPORTING
 input = titems
 IMPORTING
 OUTPUT = titems
 ELSE.
 TITEMS = COMM_STRUCTURE-BILL_QTY.
 ENDIF.
result value of the routine
RESULT = TITEMS..
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
Does it satisfy all the conditions ?? mentioned above if . As far As i know as the only key
field in the transcation it will satisfy the first two conditions .
I want to know or If possioble anybody pls take some pain for me to send the code or any
Ideas for satisfying all the conditions.
Hope I will get immediate replies....
Mail me to [email protected]

Reddy,
Please do not post in all sections ... makes it hard to follow up on posts..
Arun

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing. It appears from these forums that a lot of people are having the same problems wit this latest update.

Hi erastyle,
Actually the Licensing information for the package is missing hence it is not launching any applications. You need to Reserialize the products using APTEE which you can find it on the Machine where you have created the package. If you dont have the access to that Machine then please download and install Creative Cloud Packager and it will download APTEE in the below mentioned location.
Windows:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities
Once downloaded please follow this KB article to use the Tool.
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
Please let us know if it helps.
Regards,
Abhijit

My macbook pro is running very slow and very very hot

hi everyone I have a 13 inch mid 2012 MacBook pro,
it is running very very slow and extremely hot, I downloaded a program called smc fan control and it is reading the internal temperature of my computer as 80 degrees Celsius. I was looking on the forums and saw that I should run an apple hardware test. which I have done and it is coming up with Error 4/MOT/4/40000002: EXHAUST-2003
what does this mean? is it something to do with my fan?
also there is a very strange clicking noise when I lift the mac up or if its on its side and sometimes it just randomly freezes, the computer does not respond and then it restarts.
what do I do?
please help!

" the fan didn't seem congested with dust, at least not enough to cause any malfunction."
The lint and crap builds up in the heat exchanger radiator. It's the grilled thing at the output of the fan.
https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2012+Fan+Replacemen t/10367
Look at step 6. It's that grilled thing at the top of the fan. If you remove the fan that radiator is probably clogged with lint. Brush it all away and if possible blow out the fan with compressed air. Make sure the fan turns freely and doesn't feel stiff.
http://s291.photobucket.com/user/spudnuty/media/13%20inch%20MacBook%20Core%202%2 05-2007%20dirty%20rainstrm/MacBookHeatsinkinlet.jpg.html?filters[user]=68196367& filters[recent]=1&sort=1&o=21
This isn't a MBP radiator but the problem will look like this.

How do i turn off the STUPID gestures? every time i quickly scroll a large page i get switched to previous sites i've been at, very, very annoying! i hate gestures!

i'm using firefox 4.0 on an amd cpu running suse linux 11.4. i've completely turned off the gestures in suse (one of the first things i do, i can move a mouse very quickly and i like it to be a mouse!), i can't find a plugin or setting to turn these damn things off. the main problem is when i use the scroll wheel to rapidly move up or down a long web page and wind up on another page suddenly, very, very annoying! i really, really HATE gestures! then again i know how to use buttons etc. and i do mouse very quickly and creatively ( i also turn off several other "conveniances" like automatic window resizing, i know how to manage windows.....) thanks, i really, really hate these "features" being on by default, people with certain disabilites are probably also highly annoyed by the lack of choice in some procucts.
you really, really need to provide easy access to more settings, as evidenced by the number of extensions aimed at providing control to users. thanks

You can set all the mousewheel.with*.action prefs to 0 to perform a scroll.
mousewheel.withnokey.action
mousewheel.withaltkey.action
mousewheel.withcontrolkey.action
mousewheel.withmetakey.action
mousewheel.withshiftkey.action
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
If necessary then you can also set all the browser.gesture prefs to empty String values.

N80 very very bad

Similar Messages

Maybe you are looking for