N80 - whats needed for setting up wlan

HI,
trying to save wap minutes, what hardware is needed to set up a WLAN in my home ?? to enable me to surf on my phone via wlan??
Thanks in advance
Gary

26-Nov-2006
06:35 PM
petrib wrote:
If your PC already has WLAN, and your PC also has a fixed/cable connection to the Internet, then it might be possible to make your PC a router (Windows' "Connection Sharing" feature + the WLAN in ad-hoc mode).
I've never tried as I have WLAN access points/routers that I use, instead.
Yes it is possible, have played about with mine and successfully used it. You will need to bridge the connections between your internet connection and your wifi connection on your laptop.
Nowhere near as easy as using a router though.
I have full End User experience of:
5510, 3210, 3310, 3510, 3510i, N80, N80IE, 7610, 2610, 1208 and current E90.

Similar Messages

What is the need for setting property data inside the JMSMesage

Hi
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball");
and also please tell me how can the MDB recievies this property data ??
Thanks in advance .

raviprivate wrote:
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
>
and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties.

Advice needed for setting up hard drives.

My new editing machine is pretty well complete. Now it's time for configuring everything, so to bring it's performance up to speed.
Starting with hard drives.
Core Components list-
MB- ASUS P9X79-PRO.
CPU- i7-3930k.
Memory- RipjawsZ 8x8 @1600. 64GB.
GPU- GTX 670 4GB.
C: drive- SSD- intel 520s - 180GB (Windows 7 Pro 64 bit OEM is on this drive).
Plus various 7200rpm disks, and more to be added.
I had someone install most of the components for me, as I'm far too ill to handle the heavy lifting. They did a fairly good job, cept for the hard drive setup. So I need to ask some questions to help me get these drives setup correctly, and running at their full potential.
There's some questions in particular that I must ask first-
1/ For some reason they put the SSD on a SATA II port, but put a DVD-ROM drive on a SATA III port. To correct that I just swapped around the SATA data connections between the two. Windows appeared to work ok when I rebooted, but when I gave it a quick test with the WEI, the test failed.
I expected some problem to come as a result.
Here's what it said-
After several reboots the WEI finally ran, and gave the primary disk a higher score than before swapping the connections .
My question is- Should I take the fact that WEI is now able to run the primary disk test as an indication that it's working fine, and setup correctly ?
I also ran several HD Tune tests for that SSD. It's still a bit slower than I expected.
2/ Raid-0 setup. I take it that plugging 2x 7200rpm disk drives into the Marvell ports would be the parsimonious solution, so my question there is- What is the procedure for setting up a 2x disk Raid-0 on those Marvell ports?
The two disks for RAID-0 I chose are the cheap 'n nasty model from Seagate's 2TB range. I know they're not reliable, which is why I'm not relying on them to store such things as project files, or project media (for things like that I have a Seagate Constellation ES.2 2TB) . This RAID-0 volume's sole purpose is to move along high bit rate Uncompressed Intermediatory video at an acceptable speed.
If the data is lost to disk failure it's not a huge problem. The videos can be rendered again.
I tested both of these (see images below) Seagate Barracuda's multiple times in HD Tune. Are their speeds close enough to each other to be paired together in a RAID-0 ?
Barracuda A-
Barracuda B-
3/ So far I have four 7200rpm drives, but wish to add two more.
The model I'm considering is the Seagate ST2000NC000 Constellation CS.2 2TB .On the surface they seem like good value, and faster than my Constellation ES.2, but what's the catch? Are they suitable, and reliable enough to hold such things as project files?

Non-recoverable read errors per bits read:
Value line CS: 1 in 10**14 (1.065% annualized failure rate)
See http://www.seagate.com/em/en/internal-hard-drives/enterprise-hard-drives/hdd/enterprise-va lue-hdd/
Constellation ES2: 1 in 10**15 (0.73% annualized failure rate)
See http://www.seagate.com/em/en/internal-hard-drives/enterprise-hard-drives/hdd/enterprise-ca pacity-3-5-hdd/
For testing whether everything works as it should, try the Passmark benchmark and Prime95 stress-test.

What need more setting for internet explorer

Hi All,
My application developed in 10g developer suit ,Application server is configured. The url which I am using run in mozila 3 , If i ipen it
in simple internet explore, It did not show. Please let me know which changes required to run this url in internet explorer.
Thanks

Forms 10g supported ONLY by IE 6 OR IE 7 with OS XP This is not exactly correct. Please be careful when making statement such as this. The client certified platform information can be found here:
<blockquote>http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA</blockquote>
Determining exactly which JRE (or Jinitiator) version will be used is partially determined by the following settings in formsweb.cfg. In most cases, if you look at them carefully you should be able to determine what the values you need should be. The following example will show how to use JRE 1.6.0_33. This will require Forms 10.1.2.3 and IE8 or FF3.5
baseHTMLJInitiator=basejpi.htm
jpi_classid=clsid:CAFEEFAC-0016-0000-0033-ABCDEFFEDCBA
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_33
# The complete list of values for jpi_codebase can be found here:
# http://www.oracle.com/technetwork/java/javase/autodownload-140472.html
jpi_codebase=http://javadl-esd.sun.com/update/1.6.0/jinstall-6u33-windows-i586.cab#Version=1,6,0,33
jpi_download_page=http://www.oracle.com/technetwork/java/javase/downloads.

Can Apple TV be used on a HDTV without HDMI port? If yes, what is needed for setting up?

I have a Sony wega HDTV, and it does not have HDMI port, does anyone know if I can use Apple TV on it? If so, how is it set up?

Current AppleTVs require a TV with HDMI.
You may find some dubious adapters out there which purport to convert to other formats.
If your Tv has VGA in and an audio input you might want to look at:
http://store.apple.com/us/product/H9139VC/A/kanex-atv-pro-hdmi-to-vga-adapter-wi th-audio-support
AC

Instructions needed for setting up Linksys WRE54G (wireless range entender)

Hello all,
I've got an SMC Barricade Wireless Broadband Router (SMC7004AWBR, 802.11b, 11Mbps, WEP 128-bit encryption) with a range that I need to extend.
I've purchased the Linksys WRE54G which is supposedly compatible with any 802.11b or 802.11g wireless device as well as compatible with Macs.
Of course I can't use the "Set up Wizard" provided with the WRE54G since that only works on PCs. However, the WRE54G is supposed to be able to "use the Web-based Utility to configure the Range Expander, then connect the Range Expander to your network. Open the web browser of a networked computer, and enter the Range Expander’s IP address, 192.168.1.240"
I tried this, i.e. typing in 192.168.1.240 into Safari with the following combinations:
my Mac's Airport card "linked" with the WRE54G;
my Mac connected via ether net cable to WRE54G;
my Mac's Airport card connected to the SMC Barricade which was supposedly linked to the WRE54G wirelessly;
my Mac's Airport card connected to the SMC Barricade which was connected t0 the WRE54G via an ether net cable;
my Mac connected to the SMC Barricade with an Ethernet cable which was connected to the WRE54G via an ether net cable;
all of these combinations had no luck (Safari just spun) and I could never load a page to configure the WRE54G.
I've seen that other people in these discussion groups have used the WRE54G with success. Could one of those people please give me some hints or instructions on how to get things working?
Many thanks in advance.
Jim

While I was unable to get my Lynksys WRE54G router to function (I’ll explain why in a minute), I did learn some things that may be of benefit to others trying to get this little beast to work.
Most importantly, your base station (whatever the brand) must have “Wireless Distribution System” or “WDS” capabilities, and that functionality must be turned “on” before attempting to auto synch the WRE54G. For Macintosh, there will be a tab on the AirPort Admin Utility (after launching the application, click on your base station, then click “Configure”).
Surprisingly, it appears that many base stations do not have WDS capabilities. AirPort “Graphite” and “Snow” do not; AirPort Extreme and Express do. (Of course, my AirPort is a Graphite, so I was SOL).
However, this experience did point something out to me: Mac people (like me for 21 years now) are used to simply plugging something in and having it work. We don’t understand what’s “behind the curtain” and, when we have to work with that “stuff”, at least I get lost very, very quickly.
A couple of years ago I spent many frustrating hours getting a Lynksys access point to work with an early iMac (it would not accept an AirPort card and thus I had no other choice for wireless networking). Now the WRE54G. I am done with non-Apple gear like this -- it’s just not worth the frustration to save a few dollars.
TiBook 1ghz Mac OS X (10.4.7) proud Mac user for 21 years
TiBook 1ghz Mac OS X (10.2.x)

What role for "set to 'in development'"

In CRM_DNO_MONITOR, in the action list, I do not see the item called
"set to 'in development'"
What I have are "recheck correction" and "withdraw correction".
Maybe it is a missing role?
Please help. Thanks a lot!

Thanks!
Yes, there is an error:
No processing is planned for this message
Message no. CRM_MESSAGES011
Diagnosis
You want to postprocess an error message, which is not maintained for postprocessing.
This could be because there is a follow-up error, which automatically disappears when the other errors for the document are removed.
The long text for the error message possibly contains more information. You can look at this, by pressing the help icon in the message line.
But how to fix it?
Please help. Thanks!

How many windows server 2014 , datacenter needed for setting three pysical servers

I have three new rack server ,each with two processor , each processor has 8 cores.
the question:- how many WinSvrDataCtr 2014R2 needed?

Technically, you would need one DC per dual processor server to run as many VMs on the three hosts as you need.
Depending on your VM workloads, running with Windows Server Standard may be a more economical way to set things up licensing wise. Check the costs for each. You get 2 VMs to install per Standard license purchased per host.
The Microsoft Licensing Advisor shows the following:
License Only: Data Center $8,225.00
License Only: Standard $1,179.00
Your breakeven point between the two should be fairly straightforward to figure out.
Philip Elder Microsoft Cluster MVP Blog: http://blog.mpecsinc.ca

Configuration needed for setting revaluation of activity type rates

Hi,
I'm not sure about the obligatory settings I should make in order to configure revaluation of activity type rates.
I know that I have to set sth in Plan version and that I have to fill the Activity Type master data in a different way than if I used them without revaluation.
Can you tell me about the settings I should make?
Thanks and regards,
Karol

Hi Karol
Yes u r right u need to first set in plan version and after that its the client's discipline on transaction entry that drives this requirement.
1) If the transaction data is not posted correctly then activity hours will be vague and distorts the price.
2) You can do manual activity posting but that does solve the purpose.
3) Also u can correct activity hours posted for all orders in the system during month end, this also is a huge activity depending on the number of orders
4) Now if u wish to do price calculation thru system u need to decide on two aspects
One - plan ur costs for both activity dependent and activity independent
If your cost center has more than one activity being performed u need to do either cost splitting or enter equivalence numbers while doing activity planning
5) If u wish to hve prices calcualted by system, then during month end u need to run actual cost splitting and then do actual price calculation
6) Then u need to revaluate all your orders with actual activity prices
Hope the above clarifies - do assign points as a way to say thanks

Is there a need for setting undo_retention=0?

Hi
If i set my undo_retention to a >0 value, oracle will try his best effort to keep the consistent image for as long as my undo retention value. So, i don;t see why is there a need to let oracle manage the retention for me by setting to 0.
Thanks
Rgds
Ung

Hi,
By setting UNDO_RETENTION to 0, you enable auto tuned retention
As far as I know tuned undo retention is enabled by default. Setting the undo_retention acts as a minimal threshold.
There is a difference in the tuned undo retention value between fixed size undo tablespaces and autoextend enabled tablespaces. From the 10G Release 2 Administrator’s Guide:
If the undo tablespace is
configured with the AUTOEXTEND option, undo retention tuning is slightly different. In
this case, the database tunes the undo retention period to be slightly longer than the
longest-running query on the system at that time.
Undo Retention Tuning and Alert Thresholds For a fixed size undo tablespace, the
database calculates the maximum undo retention period based on database statistics
and on the size of the undo tablespace. For optimal undo management, rather than
tuning based on 100% of the tablespace size, the database tunes the undo retention
period based on 85% of the tablespace size, or on the warning alert threshold
percentage for space used, whichever is lower. (The warning alert threshold defaults to
85%, but can be changed.) Therefore, if you set the warning alert threshold of the undo
tablespace below 85%, this may reduce the tuned length of the undo retention period.
Regards,
Tom
http://oracledba.cz

What needed for MBP 13" to LCD TV?

OK, I'm a bit confused as to what to get to view video (and audio of course) from my 13" MBP to my Sony Bravia LCD TV. I could use an HDMI port on my Sony or perhaps the 15 pin VGA port too.
Is there just one cable that is MiniDisplay out to HDMI in? I've tried finding something like this but it appears I need to connect 2 cables to accomplish this?
Any suggestions most helpful. Thanks.

This comes recommended by another user (eww) and fits your bill:
http://kanexlive.com/products/item.aspx?id=3495
Then use a regular HDMI cable into the TV

What needed for 7813R pwm i2c SPI

Hello,
we want to use the PXI-7813R 3M Gate Digital RIO (160 DIO) card to generate PWM signals, test I2C communication and use it for SPI testing/communication.
Perhaps also some conventional I/O testing...
They've told us that on the site www.ni.com/ipnet we can find IP to do this.
My question: do we need additional software tooling to use/program this FPGA? Or is just downloading some libraries via VIPM and "using" some vi's sufficient ?
thanks.

You will need to have LabVIEW, LabVIEW FPGA and the Xilinx tools which will be installed with the FPGA module.
You can find IP where you mentioned for SPI and I2C the generation of PWM you can find in LabVIEW Example Finder under Help in the toolbar. The general I/O testing will need more info to describe where to find info how to do it.
Best Regards
Jonas Mäki
Applications Engineering
National Instruments

Workflow tips needed for setting up headless script (-noui)

My client is asking for me to create a script that can execute from Photoshop without showing the AE UI at all. For those that have created headless workflows, what tips and tricks can you recommend?
When running a script with noui, how can you tell when it's done, especially if there is a render involved?

hi all,
I actually have similar questions as well. We have a Java process that will kick off AfterEffect thru the command line "afterfx.com -noui -r myscript.jsx" to perform a render job. This method runs perfectly fine when someone actually login on the window's machine and kick off the java process.
However the whole thing runs to a crawl when we started configure the java process to run as a windows service (under the same user that we would use to normally kick off the process interactively thru live login). I can see from the task manager after effect did tries to spawn multiple processes to do the render job that was feed to it thru the myscript.jsx. But those child process would die almost instantly and then AfterEffect process would sit idle for like a minute or two before slowly perform the rendering single threaded.
Anyone here tried and successfully kick off the aftereffect process from a windows' service?
Thanks,
Joseph

Lost disk, dont have serial number for set up

I lost my disk and dont have the serial number needed for set up. What can I do?

contact adobe support: www.adobe.com/support/chat/ivrchat.html

Authorizations for Setting Up a LO Extractor

Hello folks,
has someone a list of the authorizations, that are needed
for setting up a LO Extractor?
(Starting with deleting the SetUp tables till starting the regular update
in the LO cockpit)
Thanks in advance for your help!
Oliver

Hi Luis,
thanks for your reply, but it is not exactly what I ment.
I am serching for an role in the ERP system for BW administrators
containing all transactions that are needed like. LBWQ, RSA7, ...
Greetings
Oliver

N80 - whats needed for setting up wlan

Similar Messages

Maybe you are looking for