N80 white screen

hey guys, i have a nokia n80 and suddenly the screen keeps going white. As soon as i turn it on, and every little while it will flicker back with the normal screen, and then back to white.. I cant even use it. the main problem is that I am in Canada, and I got this phone imported by someone.. I cant get it fixed locally because the phone is not available here. I am desperate, and I have no idea what to do.. please give me any suggestions.
Thanks

Hi - You appear to have posted this query before :
/discussions/board/message?board.id=smartphones&me​ssage.id=49311#M49311
If your local Nokia Service Centre is unable to help (i.e. if they're totally unable to fix it because the N80 isn't stocked in your country), then I'd advise you to contact Nokia directly for further assistance.
You can find Nokia's contact details here :
http://www.nokia.com/A4126575
Please note that this doesn't apply if the repair is chargeable. If this is the case then I'm afraid you're just going to have to pay to have it repaired or bin the phone and get one with a contract ...
Regards,
Edward

Similar Messages

  • N80 white screen problem

    Has anybody yet come up with a solution for the white screen problem on the N80, mine is doing it more often than not now, very annoying! I think I have the latest firmware V4.0632.0.38

    Can you describe with some more detail? Which model MBP do you have (e.g. 15" late 2011)? Are you, as your profile indicates, still running 10.8.1 or have you upgraded to the latest version of 10.8.2?
    Need some more information before we can offer any help.
    Clinton

  • N80 white screen at sliding

    Yesterday after updating my phone with the last software a problem had been occured, Each time i open my keyboard (Sliding it), A white screen appears and I see nothing so I cant write sms or check my contacts or anything else while opening the keyboard, The screen backed normal when I close the keyboard....

    27-Jun-200708:11 AM
    marzouk wrote:
    Yesterday after updating my phone with the last software a problem had been occured, Each time i open my keyboard (Sliding it), A white screen appears and I see nothing so I cant write sms or check my contacts or anything else while opening the keyboard, The screen backed normal when I close the keyboard....
    A couple of things to try :
    1) Take the battery physically out of your phone for 5 minutes, then put it back in and power on - do you get the same problem ?
    2) If that doesn't work then try resetting the phone following these instructions :
    /discussions/board/message?board.id=smartphones&message.id=4007
    However please be aware that doing so will wipe ALL the data from your phone such as information in your calendar, contacts and so on.
    In order to save your data you can use the PC Suite application to save and restore the data from your phone - this software can be found here :
    http://www.nokia.com/pcsuite
    If this doesn't work then it's likely you have a hardware fault and you should approach your local Nokia Service Centre to get your phone fixed.
    Hope this helps.
    Please let me know how you get on.
    Regards,
    Edward

  • White screen at sliding

    Yesterday after updating my phone (N80) with the last software, A problem had been occured, Each time i open my keyboard (Sliding it), A white screen appears and I see nothing so I cant write sms or check my contacts or anything else while opening the keyboard, The screen backed normal when I close the keyboard....

    Some service centres will take pity on people who have had their phones messed up by the NSU, try a smaller independent NSU, explain what has happened and hope for the best.
    My local service centre fixed my dads 6680 out of warrenty for £5 (cash in hand) after the NSU messed it up.

  • N80i Startup White Screen

    Hi, just got my N80i a few days ago. Just this morning when i went to turn it on, the screen went white and stayed white for quite some time. The word Nokia didnt appear so i assume it froze/hanged.
    None of the buttons worked so i had to pull out the battery. I left the battery out for about 1 hour and tried again. It worked this time though.
    Thing is i did try the 3 button reset thing, but it didnt seem to work as the phone didnt prompt me for anything.
    Just wanted to know what is the cause of this white screen appearing on startup. How can i stop this from happening again.
    Firmware is the :
    v4.0632.0.38
    13-10-2006
    RM-92
    Nokia N80 (530.01)
    Thanks
    Any help is much appreciated.
    -----SPACE FOR RENT-----

    Well, i had to send mine back. been about a week and a bit now. Should have it back in a few days though as the dealer said. He said that nokia would give me a new one. But i have a feeling its the same old one i sent off, but with another re-installed firmware or something. meh as long as it works im happy.
    -----SPACE FOR RENT-----

  • When I login to second user account I get a blank white screen.

    Just updated to 10.8.3, was also having issues that seemed to be related to Spotlight and TM backups. Issues on my main user account seem to have been resolved, but I have not reactivated Spotlight or TM yet.
    When I try to login to my wife's user account, it just hangs on a white screen. I've tried repairing user permissions, and also resetting PRAM and NVRAM. Disk verify checks out fine.

    Library/Fonts:
    [A hole bunch, removed to shorten post...]
    Does the problem account also have a lot of fonts in the home folder? That could be the reason for a login failure. Otherwise see below.
    Please read this whole message carefully, especially the warnings, before doing anything.
    1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
    2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
    3. You should either remove or update the following system modification(s), if an update is available from the developer:
    N/A
    and definitely remove at least the following:
    Logitech Control Center
    † PeerGuardian
    Hotspot Shield
    † Conduit
    4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
    Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
    If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
    5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
    6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
    You installed the Conduit spyware. To remove it, back up all data, then follow the instructions on this page:
    Help Center | Community Toolbar
    If those instructions don't work, proceed as follows.
    Triple-click the line below to select it:
    ~/Library/Application Support/Conduit
    Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
    Go ▹ Go to Folder…
    Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
    Repeat with this line:
    /Applications/Toolbars
    Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
    /Library
    Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
    Application Support/Conduit
    InputManagers/CTLoader
    LaunchAgents/com.conduit.loader.agent.plist
    ScriptingAdditions/ct_scripting.osax
    Close the Finder windows you opened. Log out and log back in.

  • My MacBook was acting weird so I restarted it and when I login a white screen flashes and goes back to the login page. Help?

    My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?

    Reinstall OS X;
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Help! When I select "Phone" it tries to open and gives me a white screen and closes. I cannot view my missed calls or voicemails.

    If anyone knows anything about this...
    When I select "Phone" on my home screen the iPhone attempts to open it, brings up a white screen and then will shut back down. I have 8 missed calls or voicemails yesterday and I couldn't check any of them. Does this happen to anyone else?
    Also, when I receive a call and I answer it does not give me the ability to end call or any of my options (sources, keypad,etc.) during the call.
    Basically, I can't do anything with my contacts, favorites, missed calls or voicemails.
    Can someone please help?

    I have tried that multiple times. I have also made sure that I have the latest updates. Would haveing 27,000+ contacts have anything to do with it?
    Sometimes it works and sometimes it doesn't

  • I performed the update to version 7.3.5 and now I cannot undo the update that eliminated a toolbar that I use every day. How do I recover my toolbar? With the upgrade on a windows 7 machine, whenever I open firefox I get a white screen.

    Uninstall to my prior version is not working. I need to go back to the original version for two reasons. First, I can no longer use one of the toolbars that was compatible to previous version, but is no longer supported so it was disabled, and two when I try and open firefox from any short cut, I get a solid white screen and I do not get any toolbars nor is there any way to navigate to a tabbed option since I can not see anything and it just hangs there with out going to my homepage or anything else.

    Do you see the menu bar or anything else? As for the missing toolbar, this is the case for 90% of Firefox users, for instance the Google Toolbar. To restore it, you need to install Mozilla's Add-On Compatibility Reporter extension from https://addons.mozilla.org/en-US/firefox/addon/15003 and restart Firefox twice.
    As for the white screen, I am not sure what you mean, but your install looks corrupted, you probably need to uninstall Firefox and reinstall from scratch. You may spend too much time and effort otherwise. Back up your settings first if you have any, like Firefox bookmarks.

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • In Attachement List Services for Objects White Screen when I Display a Note

    Hi Expert,
    Need your assistance.
    I am trying to view a note in Vendor Master data but no information provided and I can only see white screen. Below are the steps that I performed:
    1. Go to FK03
    2. Open a Vendor
    3. Click the Services for Objects
    4. Attachement List
    5. Select a Note
    4. Display it
    5. Pop up window appreared and no information occurred. Only White screen
    Is there's a missing configuration, plugin, or data in my SAP system/workstation?
    I tried to login to other PC and it worked.
    Just wondering what is missing on my computer.
    Your response will be helpful.

    Hey,
    I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
    Have you found any solution?
    Bah, this is annoying.
    //Gubbar

  • Trying to update OS to fix White Screen problem.

    Hello, I have had my Blackberry 8520 on a Virgin contract for about a year and a half now. Recently it has started randomly just changing to a black white screen that won't allow me to turn it off or perform any functions. The way I temporarily fix this is to plug it into the charger which acts like a reboot and brings it back to normal (pulling the battery to reboot it just restores the white screen after loading). In trying to find the resolve to this problem, which I haven't yet, I rang the Virgin helpline who told me to update my OS. I currently have the version 5.0 Bundle 1096 and I am trying to update it to the 5.0 Bundle 1168. I have been having increasing problems with trying to do this. I updated my desktop software for Blackberry but updating through this software always brings up the message at the install stage (after backing up my data) - "An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." My internet is working fine and I have tried many times to update through this way. I have also tried updating through the blackberry website "web based updates area" that brings up the same message. Looking through over message boards, I tried the attempt at updating through the LOADER.EXE way. However after trying to download the OS manually to my computer, which my internet explorer thought was dangerous, it came up after with another error message - "Error 1335. The cabinet file 'Data1.cab' required for installation is corrupt and cannot be used. This could indicate a network error, an error from reading from the CD-ROM, or a problem with this package.' I am now out of ways to try and update my Blackberry and have no idea how to solve the white screen problem. Any help would be much appreciated. Karen x

    Just to specify the final type of the updating I tried was following the instructions on this links - http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html I choose Europe, Virgin Media, Blackberry curve 8520. I got the software on to my computer and the error message that came up, appeared after choosing language and agreeing to the terms and conditions and starting the installation. Sorry about the big clump of writing; the post removed all of my paragraphs when I posted it. New to this! And need help! Thanks x

  • Creative Cloud White Screen on Start-up.

    When I open my Adobe CC is brings me to a white screen only and will not allow me to pass it. I have tried to delete the OBEE file, Change the name of it, and completely reinstall CC 3-4 times with no success, im just bummed that I cant update any of my programs. If anyone can offer some help/solutions regarding fixing this it would be much appreciated! *****(PS. I have included a screenshot of the issue, so you can see exactly what the issue is.

    BLANK Cloud Screen http://forums.adobe.com/message/5484303
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  • Adobe Windows Fireworks CS5 opens to white screen

    I had Adobe Creative Suite 5 Design Premium installed and working fine for over a year. All of a sudden today when I click the icon to open Fireworks it opens to a blank screen "white".
    I can see my icons for Windows 7 at the bottom but nothing but a white screen. It appears Dreamweaver is doing the same. I tried uninstalling FW and re-install and the problem
    continues. Help

    I checked the above article and it wasn't relevant to the problem stated at the beginning of this article, first off that person was using an iPad (there is no blue icon on the right side of the browser window on a computer) and 2nd, what is needed is preventing small images opening in full screen mode instead of the image loading in screen the same size as the image. The above article shows how to get in and out of full screen mode but that doesn't address the issue in the original post because the image is still placed on a too large screen. When the image is only 3x2 inches you don't need the page opening as large as a full size screen on a 27" monitor. When that happens you have to click on the tiny, miniscule, hardly attainable 1 pixel spot at the lower right corner of the screen and resize the page manually so it doesn't take up the whole screen so you can see the other documents. when you are opening multiple images this is very annoying.
    I have trouble believing that Adobe techs haven't found a solution to this issue since Sept 2011 when the first post on this issue was posted above.

  • Issue when signing into adobe I get a blank white screen

    what seems happening is when they log into their adobe account, it will go to a blank white screen and seem to cycle till it eventually times out and gets a connection error.  However, if they type in "adobe.com"  it will show them as having logged in.
    This is happening on ie, and firefox and is not profile specific meaning I can log into the computer under my credentials and experience the same thing.
    I've tried the usual suggestions such as renaming the OOBE folder, deleting temp files, etc.
    I'm thinking it's some kind of issue with adobe flash player.  Any guidance with this would be appreciated.
    Thanks
    Greg

    Moving this discussion to the Creative Cloud Download & Install forum.
    Greg please see Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html for information on how to resolve your current error.

Maybe you are looking for