N80 WiFi - WEP key doesn't save after upgr to 4.06...

Upgraded my N80 i-net version to latest firmware 4.0623.042 & since then WEP key set up in Access Point doesn't get save. I get asked for WEP Key every time I try to access WLAN. Anyone having same issues? WiFi access was working fine prior to upgrade.
Thanks in advance
Vic

Just an update to this
Thanks to a comment on another post I noticed I was able to start iTunes by right-clicking iTunes on the Start menu and select Run As Administrator. This seemed to work fine, but still I could not run without doing this afterward. Note: I'm already an administrator, and I don't fully understand the difference.
Anyway, I have decided to uninstall 10.4, reinstall 10.3, and reinstate the 10.3 library. All works fine now, so I suspect something is not quite right in 10.4.
I should have taken the 'If its not broke, then don't upgrade it' approach. I get too complacent sometimes...

Similar Messages

Iphone keeps forgetting wifi wep key

last Thursday I took mi iphone 4s to apple store otay ranch San diego CA my wifi was greyed out & said no wiffi what they did is they restore my
Iphone & updated iOS5.1.1 thw wifi is working again now My iphone keeps forgetting my home and work wifi wep key. I can connect to it and its fine and
then i will put the phone down and leave it say 20 mins or even a couple of days and in that time it would have forgotten the wep key and i have to go through the
whole process again of putting in the wep key. Its only been happening in the last week. I've only had the iphone 3 months and wondering why its doing this
now. Its picking up networks fine and also conecting to them ok, its just the fact that it forgets the wep key this so anoying . Any help on this would be really
appreciated
Thank you.

There are a couple of threads on this issue. I did a search on "forgot wep key". I'd take a look at this one to get some ideas
https://discussions.apple.com/message/18443331#18443331

Enter key doesn't work after upgrade to 3.6.7

after upgrade to 3.6.7: enter key won't activate address in location bar, nor in search engine bar, 'green arrow' in location bar doesn't work, adds ons, plugins, ext, are all empty,
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.7

AVG extensions can cause this issue.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

The 7 key doesn't work after lion install

The 7 key on my MacBook pro keyboard doesn't work following lion installation. (I'm using my iPad right now obviously!)
When I press 7, basically random stuff will come out. A set of 3 to 5 random numbers or some "command" that whatever program I am in doesn't recognize.
I tried rebooting. I have no idea where to even begin, help!

And of course this morning all keys are back to working again! But last night it was 7, J, U gibberish.
At first glance it does seem like something that might be a hardware problem, but I am deeply suspicious of coincidences like this. I'm kind of like house md that way I guess. Especially when at least two of us experienced this.
I think I will also wait for the next software update and see if that helps. At least I have my iPad to use when the keys are on the fritz.
Good luck!

Kolor key doesn't work after render

After rendering the color key is off. It's perfect on the canvas before render. AS soon as I hit render, it goes back to the blues screen un-keyed.
What is wrong?

If you're rendering in 10 bit, try changing it to 8 bit and see if that works. There are some bugs in 10 bit render.
RT is RGB, so you might not get the error then...
Patrick

Right shift key doesn't work after BIOS update on Satellite A200-28P

For some reason, after I upgraded my Bios, my right shift key doesnt work and neither does my FOUR and SIX button, hence why i have written in words :(,
I tried reinstalling windows, hasnt made a difference.
I tried rolling back the drivers for the keyboard, as well as changing to the US version of the keyboard, nothing has helped.
Thanks

okay first problem is, my warranty was due to expire, so i brought an extension, and nothing has happened whatsoever on those regards, secondly, i ran a keyboard test, and i found out that it wasnt only the four six and right shift key which was now no longer working, but also the f2, f10, f11, f12,
I have used a external keyboard, which works :D but it annoying to use that when the whole point of a laptop is to have the inbuilt keyboard,
any suggestions on this

N80 WiFi Connects but doesn't work

My new N80ie connects to my ACTIONTEC AP but won't connect to any websites or e-mail servers. It simply says 'Connecting' for ever until I press 'Cancel'. This AP is Public & Open, having no security.
At work, I have a Cisco AP running WEP. My N80 detects that AP and prompts for the password but will not connect.
Can anyone help? I thought the N80 would detect and connect to ANY AP once security was passed.

My new N80ie connects to my ACTIONTEC AP but won't connect to any websites or e-mail servers. It simply says 'Connecting' for ever until I press 'Cancel'. This AP is Public & Open, having no security.
At work, I have a Cisco AP running WEP. My N80 detects that AP and prompts for the password but will not connect.
Can anyone help? I thought the N80 would detect and connect to ANY AP once security was passed.

F-Secure Key doesn't work after the factory settings restore?

Hi, How do I install again F-Secure Key (desktop)after to restore the factory default settings? Thanks,Leka

Hello Leka,
What kind of error message are you seeing when you try to reinstall after you factory reset?

Still Having Problem With WEP Key

Hi:
I have been reading this forum and looking for WEP related topic however I still haven't solved my problem. So here is my problem and see if anyone from this forum can help.
I set my linksys to make WEP key mandatory. I used 128 bit key and was able to generate 104 bit key (26 hex digits). It works fine on my wife laptop (COMPAQ), it can communicate using this key. However it never works on my IBM/Lenovo T43P. The only difference is I am running Funk/Juniper Odyssey Client Manager software. Yes I have entered the 26 hex key properly and still doesn't work. It does work however if I disable the WEP key. Any idea what the problem is?
I took my laptop to my brothers house who is using DLINK router and use a different WEP and it works fine. So it seems like this WEP key doesn't work with my Linksys router. By the way my Linksys router is BEFW11S4.
Thanks,
Jim

If your one laptop is already working iwth same 28bits WEP key ..... i dont think so that there is any issue with router ......
You can configure the Odyssey Client Manager as per the settings in the router ....
Still if you want you can use WEP 64 bits key on the router ...check on both the laptops if they are able to access interent .....

My WEP key dissapears

ok i set up my wep key in netset and then i go to my wireless devices (nintedo ds) and then i enter in my wep key and it says its incorrect and then i went in to my router settings and my wireless security is at diabled so then i go to WEP and then i save but it tells you to put something in and then i put in the password that i want as my Passphrase and then it gives me all these numbers and letters in the keys, so then i go back to my nintendo ds and type in the password thats in my passphrase still wont work, so then i tried the ones in the key it worked but thats not that password that i want and you cant edit it, so i go back into netset and enter in my ssid and wep key passphrase and save it and it tells me everything is successful and i type in the password that i typed in netset into my nintendo ds and it still wont work! What should i do?

saber_tooth wrote:
hi , the WEP encryption key that you generate using the passphrase is a "hexadecimal" key.....on the nintendo , there shoudl be an option for you to choose "hexa decimal" in order to enter the encryption key that's on the router...
when trying to connect, do u come across any specifc error ? does it give u an option for hex or ascii characters ???
no

Wifi has suddenly stopped working. There is an exclamation mark which takes me to network diagnostics. This asks me for network name and password. This is different from the startup wizard which only asked for a WEP key and modem name. What to do?

My wifi has suddenly stopped working on my iMac, after working fine for almost a year. There is an exclamation mark on the wifi bars and when I click it, it takes me to a network diagnostics page. This page asks me for my username and password for the wifi, which I don't have. It is different from the WEP key and modem name, which I originally used to set up my connection. I have not experienced any problems on all my other wifi-enabled devices. Ipod touch, iPad, MacBook all work fine. What should I do?

The name is the name of the network you created on the router. The password is the WEP password. You shouldn't be using WEP at all, as it's insecure and also seems to cause connection failures. Use WPA 2 Personal. If your router doesn't support it, get a new one.

How can I input the required wep key to enable wifi

Trying to connect to my wifi network with my iPad, however the network needs a WEP key. iPad doesn't seem to be able to input this key, although I have it.
Any ideas..?

The password should be printed on the router's label.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Non-ASCII WIFI Hex WEP Key in iPhone 1.1.2

I am struggling to connect to my employer's WIFI network. I was able to do this back with older firmware of the iPhone when it would let me specify that the WEP key was Hex. That option doesn't seem to exist anymore.
My employer's key is "1111111111" but it doesn't have an ASCII equivalent that can be typed using the iPhone keyboard. I've looked around and some people mention that if you put a "$" in front of the hex key that it will then force the iPhone to treat it like hex but that doesn't seem to be true.
Please help me figure out what I am doing wrong.
Thank you,
Matt

Matt Cooper1,
WEP Password, and type password means the Mac is seeing it as ASCII password not a hex.
Is your network using 128-bit or 40-bit encryption?
If using 40-bit the ASCII password should be 5 characters, and 128-bit 13 characters to avoid potential hashing issues.
This article discusses that in the "Multiplatform issue" and "Avoiding the issue" sections:
http://docs.info.apple.com/article.html?artnum=108058
Hope this helps,
Nathan C.

N97 mini won't save wep key

when setting my n97 mini up to connect via wireless it doesn't remember the wep key and asks for it every time I try to connect - how can I get it to save it?

Then you both need to look at this thread.......
/t5/Software-Updates/quot-Internal-module-error-quot-in-NSU-fix-offered-here/td-p/88351
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

IMac - WEP-key not accepted (wifi)

My iMac has been working fine during 1 month.
Then all of a sudden, when starting up, I got a message, that I was no longer connected to my wifi-network.
When I choose my (secured) network in the list, and type my WEP-key, it's not accepted (either a message "connection time out", or no message at all, the screen to type the password keeps coming back).
With my other devices (pc's, iPad, iPhone), there are NO connection problems.
With my iMac I still can use my neighbour's internet, and I can use my own internet, when I swith off the WEP-key of the router.
So the problem is that my key is not accepted by the iMac (and I'm sure that I type the correct password; I choose "show password").
As already mentionned, the first month I could go on the internet (the key was accepted).

Jim:
Thanks for your comments. I think you may be right. I have more information now. I installed a later version of the C4500 package (to fix another problem where the PC Firewall and internet access was disabled for 3 mins at startup), and the network setup/diagnostics are different in the newer package. After installing this the first time, everything worked - I mean everything, even scan from printer. During the Network Setup the wizard found only one network (mine). However, the Wireless Network Report said it had detected two.
However, the next time I switched the printer on, it never connected. Network diagnostics then told me that the PC and the printer were on different networks, 192.168.0.0 and 169.254.0.0 and that this usually results from two close networks with the default router manufactures SSID. This is not the case here - I am in any case in a very isolated country farm! It also (predictably) said the WEP was wrong. At one point in the diagnostic I can see it's trying 169.254.196.213. There's nothing on my network other than 192.168.0.* Attempts to reconfigure the network again show that there is only one network detected on-air, and no duplicate SSIDs, but the same result in the diagnostic - crossed-networks. Even re-installing the software won't fix it now. Whereas before I could at least print/scan from the PC and only the printer 'thought' the network was dead, now the network really IS dead and I am left with a USB-only setup.
I think you may be right that the printer somehow 'remembers' a phantom/ghost network. What I need is some way to hard-reset the printer. I saw in other postings that you know something about this, at least on other printers. Alternatively, I need a way to set the printer network parameters, including hard-coded IP address, over the USB but WITHOUT the router radio on, then switch it on and let the HP network setup wizard find it over the radio. Any ideas on that one please?
Peter M

N80 WiFi - WEP key doesn't save after upgr to 4.06...

Similar Messages

Maybe you are looking for