N80: WLAN problem: "Define access pts. for secure ...
Nokia N80 (black)
Firmware: 3.0617.0.6
I have problems getting on the WLAN. Here is a step-by-step description of what I do:
First:
1) "Connect." -> "Conn. mgr" -> "Availab. WLAN"
2) Mark "HQ" WLAN
3) "Options" -> "Define access point"
4) Answer "Yes" to "Define internet access point for WLAN network "HQ"?
5) Get the message: "Define access pts. for secure WLAN networks in 'Access points' in conn. settings."
Then:
6) "Tools" -> "Settings" -> "Connection" -> "Access points"
7) "Options" -> "New access point" -> "Use default settings"
8) Write "HQ" in the "Connection name" field.
9) "Data bearer": "Wireless LAN"
10) "WLAN netw. name": "HQ"
11) "Network status": "Public"
12) "WLAN netw. mode": "Infrastructure"
13) "WLAN security mode": "WPA/WPA2" (the WLAN is using "WPA-PSK")
14) "WLAN securoty settings" sub-menu:
- "WPA mode": "Pre-shared key"
- Pre-shared key": the correct one (verified with laptop connection)
- "TKIP encryption": I have tried both "Allowed" and "Not allowed".
15) Homepage: "None".
When I go back and go through steps 1-5 again, I get the exact same message.
What am I doing wrong? Can someone give please me a _really_ detailed step-by-step guide for how to do this?
I have been able to use gcalsync (www.gcalsync.com) with the same "HQ" WLAN, but then it is gcalsync that asks for SSID and key. So: The WLAN works, I just don't understand how to set it up.
I will be very, very grateful if someone can help me with this. Thank you.
Hi Chrlov,
An example of my set up based on my old Linksys router.
1. Go to Menu > Tools > Settings > Connection > Access points.
2. Select Options > New access point > Use default settings.
3. Give a name to 'Connection name'. In my case, 'Home WLAN'.
4. Change 'Data bearer' to 'Wireless LAN'.
5. Change 'WLAN netw. name' to the SSID I had set up on my Linksys router. In my case, some thing like 'gen1xxxxhomewireless' (this is not the real one, censored by me. LOL)
6. Since my SSID is hidden, I change 'Network status' to 'Hidden'.
7. My Linksys had WEP set up (and that it is permanent). So I leave 'WLAN netw. mode' and 'WLAN security mode' as 'Infrastructure' and 'WEP' respectively.
8. I set up WEP security settings in 'WLAN security sett.'
a. Since I'm using key 3, I change 'WEP key in use' to '#3'.
b. I leave 'Authentication type' as the default of 'Open'.
c. I key in all 4 keys in 'WEP key settings'. Since I'm using 64-bit hexadecimal key, I set 'WEP encryption' to '64 bits' and 'WEP key format' to 'Hexadecimal'.
Hope this is a good reference.
Good luck and cheers. ^_^;
Similar Messages
-
Define access sequence for purchase order
Hi,
Please can I get some advice on how to create an access sequence in MM (in IMG = define access sequence for purchase order)
I have created a condition type for handling costs and want to assign a default value for each individual goods supplier.
So for plant 1000 and goods supplier 40, assign a rate of 3% to the condition. For plant 1000 and goods supplier 50, assign a rate of 7% etc etc
How do I go about doing this please
Thank youhi,
Steps,
Customizing activities:
1) Create the condition table for vendor and plant field.
table no should be above 500 as its a customizing.
2) create access sequence and assign the condition table to this access sequence.And activate the fields in table.
3) create Z condition type and put this access sequence into the condition type.
End user activities:
4) maitain the condition record based on vendor and plant in MEK1 transaction
regards,
sujit -
Define access rights for the secured dimensions
I could not able to see the Entity Dimension when we define access from Member Access Prifiles.
Can you please let me how to get that populated the Entity Dimension.
Thank you,
RajuThanks a lot Patrick
By taking with your points - Now I can able to see the dimension.
More in detail:
Select the Application from Admin Console
Click on Modify Application from Application Tasks
From the Application Dimensions->Select the Dimension "Entity" and Click on "Secured" button
and Finally -> Click on Modify Application to save the changes
Now we can able to see the Dimension from Member Access Profile.
Regards,
Raju. -
Dear Experts,
I have configured PSS as below,
Activated "PSS" in connector configuration.
Configure PSS as per SAP note.
Configured 2 Questions and activated them.
Maintained "Service User" in 10 services mentioned in SAP note
After this when I try to register new user with "Admin Defined Questions" I do not get any question to select, it comes as a blank field. But I can register with user defined questions and can reset password as well as get mail for the same too.
Questions:
How to deactivate "User Defined Questions" option?
Why I am not getting "Admin Defined Questions" for security question registration?
Did anybody faced the same issue?
Thanks in advance,
BR,
MangeshHi Friends,
Any advice on the same.
I have three issues for PSS,
Admin question are not visible
set option "Challenge response"
Set admin questions and marked them active
No system displayed during password reset
Marked connector as PSS activated
User available in backend as this is allow me to login for users available in backend system through end user logon page
GRACUSER and GRACUSRCONN has the entry
How to deactivate option "user defined question" for all users
Any suggestions. I have tried options suggested on community through threads but no luck till.
Raised it to SAP now but if anyone can suggest would be great so I would try it.
BR,
Mangesh -
Problem--Define number range for cProjects projects
Hi,
Does anybody knows how to define/create number range for projects in cProjects?.
In the standard cPrjects frontend system, the system is taking 16 digits number automatically so i want to define my own number range as required by the client.
Hence please let me know if some knows abt how to define number ranges for projects in cProjects system.
You can also reach me on [email protected]
Thanking you,
Cheers,
Suresh NagarajaHi Suresh,
don't think there is a standard functionality for this. But you could create your own number range object and fill the data via BAdi. Try DPR_ATTRIBUTES.
Cheers
Thorsten -
i have n80 and i use the active standby but suddenly the wlan icon from the stand by dissapeared. i tried to reset the phone but nothing. can anybody help me pls?
Hi Chrlov,
An example of my set up based on my old Linksys router.
1. Go to Menu > Tools > Settings > Connection > Access points.
2. Select Options > New access point > Use default settings.
3. Give a name to 'Connection name'. In my case, 'Home WLAN'.
4. Change 'Data bearer' to 'Wireless LAN'.
5. Change 'WLAN netw. name' to the SSID I had set up on my Linksys router. In my case, some thing like 'gen1xxxxhomewireless' (this is not the real one, censored by me. LOL)
6. Since my SSID is hidden, I change 'Network status' to 'Hidden'.
7. My Linksys had WEP set up (and that it is permanent). So I leave 'WLAN netw. mode' and 'WLAN security mode' as 'Infrastructure' and 'WEP' respectively.
8. I set up WEP security settings in 'WLAN security sett.'
a. Since I'm using key 3, I change 'WEP key in use' to '#3'.
b. I leave 'Authentication type' as the default of 'Open'.
c. I key in all 4 keys in 'WEP key settings'. Since I'm using 64-bit hexadecimal key, I set 'WEP encryption' to '64 bits' and 'WEP key format' to 'Hexadecimal'.
Hope this is a good reference.
Good luck and cheers. ^_^; -
E55 user defined access point for outgoing email (...
Hello
I changed the outgoing default connection in E55 here:
menu. email. settings. mymailbox. mailbox settings. advanced mailb settings.outgoing mail settings. access point in use. user defined
now when i do a email message it doesnt send when i choose send in any new email message
it seems a bug, because it does not quit of the send option, it appears a little window sending email, but it does not send!
then if i try to get out the only options are delete/save to drafts
can this be fixed?
Peterpeter_p wrote:
Hello
I changed the outgoing default connection in E55 here:
menu. email. settings. mymailbox. mailbox settings. advanced mailb settings.outgoing mail settings. access point in use. user defined
now when i do a email message it doesnt send when i choose send in any new email message
it seems a bug, because it does not quit of the send option, it appears a little window sending email, but it does not send!
then if i try to get out the only options are delete/save to drafts
can this be fixed?
Peter
Are you using a WLAN or GPRS accesspoint?
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
WRT160Nv Problems with Access Restrictions for URLS
So I have a need to block some URLs from my network.
I know how to do such but the problem is that the user interface that Linksys provides seems to limit the url field to 22 bytes.
Seems you can only block if you include the complete url "http://www.WebSite.com"
So in my situation I need to block http://www.dailymotion.com but that is 26 bytes and the field on the router GUI will not allow 26 bytes.
Does anyone have ideas how I can about blocking URLs that are longer than 22 bytes?
Does not see there is a firmware upgrade for it either, current installed version is 3.0.02Is that the firmware that was already in the router or did you update it?
The box said windows xp or better... So I installed Linux! -
Problems defining the array for quicksort
import java.io.*;
import java.util.*;
import chn.util.*;
public class Store
private Item [] myStore;
public Store (String fileName) {
fileName = "file50.txt";
/* public void displayStore ()
public String toString () { }
public void doSort () { }
*/ private void quickSort (Item[] lit, int lo, int hi) // I don't exactly know what Item[ ] lit will do. please explain it for me.
int h, l, p, t;
if (lo < hi) {
l = lo;
h = hi;
/* p = a[hi]; //my problem starts with the array 'a' (suppose to be item, but don't know how to modify that.
do {
while ((l < h) && (a[l] <= p)) l++;
while ((h > l) && (a[h] >= p)) h--;
if (l < h) {
t = a[l];
a[l] = a[h];
a[h] = t;
} while (l < h);
t = a[l];
a[l] = a[hi];
a[hi] = t;
private void loadFile (String inFileName)
FileInput inFile = new FileInput (inFileName = "file50.txt");
}The array 'a' should be replaced with the array 'Item' but some how I'm getting the errors that Item's not a valid type.
for more information, please see http://forum.java.sun.com/thread.jspa?threadID=699397&tstart=60 for more information (the original problem)Here is what I suggest.
Use collections. I suggest an ArrayList. Using one array involves all sort of messy swapping around which really will make things difficult for you to grasp the basic concept of.
So let us assume a method like this
public void quicksort(List items)
items is a List of Items.
So here is how to write a quicksort
1) If the size of the list is 1 then return the list because it is down to it's final piece and doesn't need to be sorted further
2) Choose a pivot element of your list. The mid point is often chosen for this.
3) Create two new Lists. One for lower elements and one for higher and equal to elements.
4) Go through the list and use compareTo to compare the elements of the list with your pivot element. Take care to skip the pivot element. If elements are less than the pivot put them in the first list. If they are more than or equal to put them in the second list.
5) Recursively call quicksort(list) on the sublists we made.
6) Merge the sublists and pivot values back into one list
7) return the merged list -
Hi,
How can i define security level for each tab?
i have set of users and i want a particular tab to be displayed to certain users only not to all users.
i have already defined access privilege for the particular tab in the Advance option for tab granting privilege to specific user and also specified that this particular tab should not inherit privilege from the page, but still the tab is displayed to all the users.
regards,
Sunil
nullI also have this problem. I am using Portal 10.1.2.0.2.
I've set up two groups (systema_users and systemb_users) and have set up two tabs, each of which should be only accessible to one of these groups. However, no matter which user I log in as, I can see both tabs regardless of which group the user belongs to. On each tab I have set access to 'Specify Access Settings' and have specified the appropriate group, with the Customize Portlets (Full) privilege, since I need them to be able to customise the content of the tab. What am I missing here? -
I am using sharepoint 2010 onpremise.
I created a custom list, content type and columns. After this I go to the list and click on the infopath button in the ribbon to customize the form. I changed the form and published to the server.
Now I get this error when I go to some page where I have added a infopath webpart:
The following location is in a different site collection:
http://www.myCompany.nl/someSubsite/Lists/VraagEnAntwoord/VraagEnAntwoord/template.xsn. Access to locations on different site collections is blocked for security reasons. For more information, contact your site administrator.
This website has anonymous access.
I have googled and found many people with this problem, but I dont find some solution. Someone talk about create a template from infopath and then publish it to a content type. I dont understand this solution. Can someone help?You are actually running an older version of Firefox (8). You should update to Firefox 9.0.1 and see if that helps
-
Accelerator/Access Key for commandLink problem
I tried setting the access key for a commandLink but all it does is put the focus the command link and not trigger the action(unless enter key is pressed after pressing the access key). Is this the expected behavior or there is a way to make access keys execute action on commandLink?
Hi Hyangelo,
Even i am facing the same problem . I am using Jdeveoper 11.1.1.3.0 . I am having a commandLink , menu and commandNavigationItem , I am trying to access the component with accesskeys like giving ..
<af:commandLink id="cl_onpage" partialSubmit="true"
textAndAccessKey="#{ARUIBundle.Hello}"
action="#{AccessBean.trigger}"></af:commandLink>
wherein my accesskey is defined in my property file and it is 'H'. As i am using internet explorer i use alt + H as key combination . When i use the key combination , Only the focus is set to the component and the action with it is not getting triggered unless i hit the enter key.
Can you let us know as to how you solved the issue . As you said it was taking a while for the action to be triggered. I tried the same , waited for 5 minutes but still the action did not get triggered.
Thanks
Vini -
Adobe Access Server for Protected Streaming Configuration Problem
I cannot get the Adobe Access Server for Protected Streaming sample implementation up and running. Could somebody help me figure out where I'm going wrong?
I've configured the license server with the correct PFX files and when I run the validation tool, I get the following output. This is a clean install with only the license server configuration (the content server is a separate machine). I also get a similar error in the tomcat logs when I try to access a piece of content licensed to this server.
$ java -jar libs/flashaccess-validator.jar -g -r /var/lib/tomcat6/licenseserver/
Validating global deployment ...
Validating partition deployment - flashaccessserver...
Validating tenant deployment - flashaccessserver/mediafly...Failed to validate tenant deployment 'flashaccessserver/mediafly' - Error reading key server certificate for partition='flashaccessserver', tenant='mediafly'
See log for details:
(/tmp/temp281722781181937073071254678876423/flashaccessserver/flashaccess-partition.log)
$ cat /tmp/temp281722781181937073071254678876423/flashaccessserver/flashaccess-partition.log
[] 2013-02-12 15:37:26,383 INFO [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/var/lib/tomcat6/licenseserver/flashaccessserver/libs/, file:/var/lib/tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext -sample.jar]'
[] 2013-02-12 15:38:41,247 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/mediafly'
com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading key server certificate for partition='flashaccessserver', tenant='mediafly'
at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.readCerts(TenantConfigurationImpl.java:720)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.<init>(TenantConfigurationImpl.java:705)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:115)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
Caused by: java.security.cert.CertificateException: java.lang.IllegalArgumentException: unknown object in factory: org.bouncycastle.asn1.DERInteger
at org.bouncycastle.jce.provider.JDKX509CertificateFactory.engineGenerateCertificate(Unknown Source)
at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:322)
at com.adobe.flashaccess.core.crypto.CertUtil.loadCert(CertUtil.java:33)
at com.adobe.flashaccess.sdk.cert.CertificateFactory.loadCert(CertificateFactory.java:45)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.readCert(TenantConfigurationImpl.java:739)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.readCerts(TenantConfigurationImpl.java:718)
... 8 more
Some additional information:
$ uname -s -r -v -m
Linux 2.6.32-350-ec2 #59-Ubuntu SMP Mon Jan 7 14:20:59 UTC 2013 x86_64
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 10.04.4 LTS
Release: 10.04
Codename: lucid
$ dpkg -l | grep tomcat
ii libtomcat6-java 6.0.24-2ubuntu1.12 Servlet and JSP engine -- core libraries
ii tomcat6 6.0.24-2ubuntu1.12 Servlet and JSP engine
ii tomcat6-common 6.0.24-2ubuntu1.12 Servlet and JSP engine -- common files
$ dpkg -l | grep jdk
ii openjdk-6-jre-headless 6b24-1.11.5-0ubuntu1~10.04.2 OpenJDK Java runtime, using Hotspot JIT (hea
ii openjdk-6-jre-lib 6b24-1.11.5-0ubuntu1~10.04.2 OpenJDK Java runtime (architecture independe
$ md5sum AdobeAccessProSDK_4_0_LS1_java.exe
73068d8348cbdc1c29211a463a58b8df AdobeAccessProSDK_4_0_LS1_java.exe
Thanks,
BryanI found the problem.
Certificates/KeyServer/File[@path] needs to be set your license file, but it must be in the ".cer" format. The server won't start without this fileand it was not mentioned anywhere in the quick start guide but is mentioned in the protected streaming document.
Bryan -
Defining MAPs for secured dimensions
With regards to defining the "Member Access Profiles (MAP)" for dimension members SAP adviced the following:
"When defining member access for secured dimensions, be sure to define access for ALL secured dimensions of the application"
My question is:
Do I have to do it in just one MAP or can I do it in two separate MAPs ???You can create Multiple MAP.
Any user should have associate at least one MAP.
In this way you can define access for diferent users to members from secure dimensions.
Kind Regards
Sorin Radulescu -
Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support
Maybe you are looking for
-
How can I change the BlackBerry Link Network Drive mapping from Z: to something else?
Hello, I generally have a mapping to my NFS server on Z:, and my iTunes library has a relative path to Z: for all of my music - the fact that Link is automatically picking Z: as my network sync target for my device does not work for me to sync music,
-
My pictures are no longer downloading to my computer. I don't know why
I had been using photostream to push my photos from my Iphone 4s to my PC, to a folder on my desktop. Then I would put those photos in other folders according to year/month/event/etc under my pictures. I think I may have moved a folder but cannot f
-
How to upload photo to iCloud if...
1) I deleted the photo in iCloud by mistake, but there's still one on iPhone(iOS7.0.4), what can I do if I want to upload it to iCloud again? 2) I edited the photo, maybe croped it (function by iOS7.0.4 itself), or other ways, so I got a new photo, b
-
Print screen for mac with windows
Hi.. can anyone tell me what is the print sreen key on mac using windows? thank you
-
Can't get into MyVerizon from iPhone
I keep trying to log onto My Verizon from my iPhone but keep getting the message "unable to process you request, please try again later." Why is this happening? I did get into MyVerizon from my desktop without any problems..