N80 won't display caller

Hi there,
Got my N80 a couple months ago (Orange) and not once has it shown a missed call as a number, everytime it says "(no number)" on the logs, or just "Call" when someone is phoning me.
I've tried standing next to a phone mast because there's one fairly locally and I get the same problem! There's a couple of other Orange phones in the same house and they work just fine. The phone works perfectly apart from this, any ideas?

Try talking to Orange about this, I've noticed this happens on mine too and shortly afterwards I get a sms from orange with the callers details. Maybe this is due to the missed call alerts service?

Similar Messages

  • Nokia 6288 won't display the caller ID

    When a call comes in it just says 'call' it won't display either a number or the caller's name if the caller is someone in my contact list.

    1) Ensure that you have CLIP enabled on your SIM. Call your network provider and confirm this.
    2) Ensure that you do not have the same number used on more than one contact in your phone book.
    Knowledge should be your Advisor when you need help.
    1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
    Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

  • E71 won't display who's calling

    I've just got a new E71, new Sim etc as part of an upgrade, but it won't display who's calling me. All it show's is 'Call' instead of the number, or contact name if it's stored in the phone.
    Can anyone help?

    This problem is caused by the network, not the phone, it's very common on the orange network but can happen elsewhere too.
    What you need to do is contact your network about the issue.  It is usually solved by them sending an over-the-air sim update or by replacing your sim card.

  • CS4 Live View Won't Display External CSS

    I have a simple .html file - all located on my local machine
    with an external .css file located in the same folder as the .html
    file. Everything displays fine in a browser. Live View won't
    display items in my external css file. It displays items in the
    inline file fine. If I move items from the external to the inline
    file they will appear. Links are relative to the Document in the
    site setup. No default images folder defined (images are in a
    folder called "images").
    I know it's something simple and dunderheaded. Just getting
    back into html after a little hiatus. Any help greatly
    appreciated.

    > If this is a static site, ignore the Live View button.
    > Test it in browsers using F12.
    Live view will work fine in a static site, though.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Alan" <[email protected]> wrote in
    message
    news:C5713A99.31982A%[email protected]..
    > suggestion-
    >
    > Make every line in the site defintion Correct.
    > If not sure what it should be, ask.
    >
    >
    > If you use site root relative paths, enable using temp
    files in dw
    > preferences->Preview in browser
    >
    > The link to the external css file is a site root
    relative path.
    > Change it to a document relative path
    >
    > There is a pulldown at the bottom of the "browse to
    file" dialog box to
    > choose linking method.
    >
    > --
    > Alan
    > Adobe Community Expert, dreamweaver
    >
    >
    http://www.adobe.com/communities/experts/
    >
    >
    >

  • My iPhone 4s won't display my contact names in my message, although the number is still linked to the correct contact in my phone book

    My iPhone 4s won't display my contact names in my message, although the number is still linked to the correct contact in my phone book.
    Recently updated with iOS 5.1.1, I've read elsewhere about a possible bug associated with the update?

    Hello, Sue.Darby. 
    Thank you for visiting Apple Support Communities. 
    I would recommend having your friend check to see if call and message blocking is enabled on their end.  Here is some information regarding that feature. 
    iOS 7: Understanding call and message blocking
    http://support.apple.com/kb/ht5845
    -Jason H. 

  • Dynamic text won't display

    I don't know if this is a bug. I have a movie that contains a
    dynamic text. When I run it, the text displays fine. But when the
    said movie is run through another movie clip (using loadMovie), the
    dynamic text won't display. Any ideas why? Thank you.

    dongzky wrote:
    > Actually, there was no code involved. The dynamic text,
    with borders around it,
    > I tried to put a value for testing. It works fine when
    run. But when called
    > by another movie clip, although the movie with the
    dynamic text still loads,
    > the text won't display anymore. Even the borders were
    gone.
    Than again, it's a bug on your end :)
    Dynamic text is a text container, it's to be use with
    dynamically given data, from
    source file or variable string on timeline. It's not meant to
    be for regular text
    display. You need to use Static text. The fact that you can
    see it it's just flash
    being tolerant but it only lasts for as long as the movie is
    getting more complex.
    You can get away with somethings even tho you should not be
    using them, does not
    mean they will work all the way. Dynamic text, as said above
    is for text that comes
    to flash from outside source and this is when it works best.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • After installing new HDD, some iPhoto Events/Photos won't display

    Problem: I upgraded to 1TB HDD a couple of days ago and tried to use the System Restore from Backup under Disk Utility. It never worked, got to a blue screen and just hung. So I reloaded Snow Leopard and then used Setup Assistant to move Apps/Files/Settings from my Time Machine Backup.
    Today I was going through files to see if anything was missing and found a number of Events from 2010 that wouldn't display in iPhoto '08, just dark squares but with the event name underneath.
    Rolling the mouse over the empty square displayed the correct number of photos for the event but photos wouldn't display.
    Next I "Browsed" the Time Machine Backup (from iPhoto) and the same Events were also empty on Time Machine Backups.
    The funny thing is the empty events are scattered meaning I have a full Events from Feb and March 2010 but empty events from Jan, Feb and May 2010. And then when I go into the Empty Events on Time Machine, I can call up the photo number but the photo won't display.
    Is there a way to recover these photos? I'm pretty sure there on the TM backup and also on my new HDD.
    As a "suspenders/belt" type person, I have the photos backed up on a Windows PC but rather work through this problem first.
    iMac 20" 2.4 Ghz Mac OS X (10.6.4) AEBSn AXg

    You can enter TM while in iPhoto and do a search for some of the missing photos by file name. When you find a version that appears to have them in exit TM, go to your Pictures folder, reenter TM, go to that version and restore the entire library. I'd keep both your current library and the restored. Then you can check to see if the missing photos are in the restored library.
    If neither library have all of the photos but do combined you can use the paid version of iPhoto Library Manager to merge the two libraries into a new 3rd library setting the option to not import duplicates. That should get you a complete library.
    OT
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • Contact name won't display

    Incoming calls and messages with international prefix (e.g. +1) won't display the name of the contact.  Those without a prefix do display.  Can someone help me figure out why and how to fix it?

    check that you dont have that number duplicated in your contacts list. Try deleting the contact and re-entering it. Remember if you solve the problem the messages that are already in the inbox wont change to show the name.

  • ALV won't display

    Hi all,
    I'm at internship and have to learn ALV.
    The below code won't display anything. Am i doing something worng?
    REPORT  ZRE_PRM2_LIST_DISPLAY.
    *-- Global data definitions for ALV
    *--- ALV Grid instance reference
    DATA gr_alvgrid TYPE REF TO cl_gui_alv_grid .
    *--- Name of the custom control added on the screen
    DATA gc_custom_control_name TYPE scrfname VALUE 'CC_ALV' .
    *-- Custom container instance reference
    DATA gr_ccontainer TYPE REF TO cl_gui_custom_container .
    *-- Field catalog table
    DATA gt_fieldcat TYPE lvc_t_fcat .
    *-- Layout Structure
    DATA gs_layout TYPE lvc_s_layo .
    **-- Internal table
    DATA gt_list TYPE zprm2_material occurs 0 with header line .
    * START OF SELECTION
    START-OF-SELECTION .
    PERFORM get_data .
    PERFORM display_alv .
    *&      Form  display ALV
    *       Display selected PRM2 data.
    FORM display_alv .
      IF gr_alvgrid IS INITIAL .
    *---- Creating custom container instance
        CREATE OBJECT GR_CCONTAINER
          EXPORTING
            CONTAINER_NAME              = gc_custom_control_name
          EXCEPTIONS
            CNTL_ERROR                  = 1
            CNTL_SYSTEM_ERROR           = 2
            CREATE_ERROR                = 3
            LIFETIME_ERROR              = 4
            LIFETIME_DYNPRO_DYNPRO_LINK = 5
            others                      = 6
        IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        CREATE OBJECT GR_ALVGRID
          EXPORTING
            I_PARENT          = gr_ccontainer
          EXCEPTIONS
            ERROR_CNTL_CREATE = 1
            ERROR_CNTL_INIT   = 2
            ERROR_CNTL_LINK   = 3
            ERROR_DP_CREATE   = 4
            others            = 5
        IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    *----Preparing field catalog
        PERFORM prepare_field_catalog CHANGING gt_fieldcat .
    *----Preparing layout structure
        PERFORM prepare_layout CHANGING gs_layout .
        CALL METHOD gr_alvgrid->SET_TABLE_FOR_FIRST_DISPLAY
          EXPORTING
    *        I_BUFFER_ACTIVE               =
    *        I_BYPASSING_BUFFER            =
    *        I_CONSISTENCY_CHECK           =
    *        I_STRUCTURE_NAME              = 'zprm2_material'
    *        IS_VARIANT                    =
    *        I_SAVE                        =
    *        I_DEFAULT                     = 'X'
            IS_LAYOUT                     = gs_layout
    *        IS_PRINT                      =
    *        IT_SPECIAL_GROUPS             =
    *        IT_TOOLBAR_EXCLUDING          =
    *        IT_HYPERLINK                  =
    *        IT_ALV_GRAPHICS               =
    *        IT_EXCEPT_QINFO               =
    *        IR_SALV_ADAPTER               =
          CHANGING
            IT_OUTTAB                     = gt_list[]
            IT_FIELDCATALOG               = gt_fieldcat
    *        IT_SORT                       =
    *        IT_FILTER                     =
          EXCEPTIONS
            INVALID_PARAMETER_COMBINATION = 1
            PROGRAM_ERROR                 = 2
            TOO_MANY_LINES                = 3
            others                        = 4
        IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF .
    ENDFORM .
    *&      Form  get_data
    *       GET data from prm2 tables.
    FORM get_data .
      select * from zprm2_material into gt_list .
        APPEND gt_list .
      ENDSELECT.
    ENDFORM .
    FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat .
      DATA ls_fcat type lvc_s_fcat .
      CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
         I_STRUCTURE_NAME             = 'zprm2_material'
        CHANGING
          CT_FIELDCAT                  = pt_fieldcat[]
       EXCEPTIONS
         INCONSISTENT_INTERFACE       = 1
         PROGRAM_ERROR                = 2
         OTHERS                       = 3
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM .
    FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo .
      ps_layout-zebra = 'X' .
      ps_layout-grid_title = 'PRM2' .
      ps_layout-smalltitle = 'X'.
    ENDFORM .

    I made these changes:
    DATA gr_ccontainer TYPE REF TO cl_gui_dialogbox_container .
    so i changed the reference of the container to cl_gui_dialogbox_container, and...
        CREATE OBJECT GR_CCONTAINER
          EXPORTING
            width                       = 1000
           height                      = 250
            top                         = 50
            left                        = 50
            caption                     = 'TEST'
          EXCEPTIONS
            cntl_error                  = 1
            cntl_system_error           = 2
            create_error                = 3
            lifetime_error              = 4
            lifetime_dynpro_dynpro_link = 5.
        IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    Changed this method. Now it says that the fieldcatalog is empty.
    I just want it to auto create the container. Is it a possibility?

  • My iPhone 5 won't display smart text options.

    My iPhone 5 won't display smart text. It did when I initially downloaded the new OS, now those options don't appear at all. Did I click something to make them disappear?
    I went into Settings to see if there was a component of it within Messages. I don't see anything.
    Thoughts please.....
    Thanks much
    Ginger

    Awwww......that's it....the dash! I tapped it. Tried to drag it up/down and it didn't move. Now I swiped and it's back!
    So I need to remember to drag up/down and now swipe.....
    Thanks much!
    Ginger

  • ITunes won't display current voice memos from my iPhone 4S. How can I tranfer this data without loosing it?, iTunes won't display current voice memos from my iPhone 4S. How can I tranfer this data without loosing it?

    Please help! My iTunes won't display my voice memos from iPhone 4S when trying to sync data. Files are to large for emailing. I want to back up the files on to my computer.

    JustinV72 wrote:
    How do I get the audiobook onto my iphone without erasing anything?
    You transfer the purchases to the computer you use to sync the iPhone.  You can use a thumb drive or an external HD, etc.  Read this: iTunes for Mac - How to copy purchases between computers:  http://support.apple.com/kb/HT1373

  • My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

    My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

    Do you have a cellular plan with data and SMS activated?

  • I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?

    I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?

    This could be from having restrictions enabled. Icons completely disappear when "restricted"

  • IMac 2.66 Radeon HD 2600 Pro: some Excel files won't display in ppt decks

    Running Leopard 10.5.8 and MS Office 2004
    Two iMac (8.1) 2.66 GHz with ATI Radeon HD 2600 Pro video won't display some Excel files in PowerPoint decks, but iMac 1.83 GHz Core Duo will display o.k. as will MacBook Pro, MacBook, etc. Installing a trial version of Office 2008, both iMac 2.66 GHz display the PowerPoint files o.k.
    I could downgrade the users to Intel iMac 1.83 GHz, or buy two copies of Office 2008 and support them, neither of which is a great solution.
    Looking for a simple fix or workaround on what seems to be a video card issue. Don't seem to see this problem or a fix on the ATI site. I've googled this but haven't run into a similar issue.

    Well, Office 2008 is only $110 USD at http://www.amazon.com/Microsoft-Office-2008-Home-Student/dp/B000X86ZAS/ref=sr11?ie=UTF8&s=software&qid=1251560959&sr=8-1
    That seems the least expensive solution to me.

  • ITunes won't play music and won't display some of my album art.

    iTunes won't play music and won't display some of my album art. I'll click play but the song wont play and some of my album art doesnt appear anymore. When I go on iTunes music store non of the pictures will appear it will just be black where a picture should be. What can i do to fix all of this?????

    I am having the exact same problem and have been trying to solve it for a couple of weeks. So far I havent found a soulution. But if you get one can you please let me know? Good Luck

Maybe you are looking for