N80 works in the States but not Europe

I purchased an N80 in the States and it worked with my T-Mobile SIM but then I moved to Cyprus. I got a Vodafone SIM and now the N80 will not connect to the network. The new SIM works with a different phone so I know that is not the problem.
Any ideas on what I can do to get my N80 working would be most welcome.

3G won't work as different frequencies, but if you set the phone to GSM you'll be fine.
If you are saying that you get a SIM error, then you need the phone unlock code from the supplying network (handset).
Orange Handsets : Nokia 51 > NK702 (6130) > 6210 > 6310i (silver)> 7210i > 6230 > 6230i (silver) > N80 (silver) > N95-1
T-Mobile: N96

Similar Messages

  • Same command works on the server but not on the workstation

    Scenario
    Exchange 2010 sp3
    Name                           Value
    CLRVersion                     2.0.50727.4984
    BuildVersion                   6.1.7600.16385
    PSVersion                      2.0
    WSManStackVersion              2.0
    PSCompatibleVersions           {1.0, 2.0}
    SerializationVersion           1.1.0.1
    PSRemotingProtocolVersion      2.1
    Worstation:
    Name                           Value
    PSVersion                      4.0
    WSManStackVersion              3.0
    SerializationVersion           1.1.0.1
    CLRVersion                     4.0.30319.18063
    BuildVersion                   6.3.9600.16406
    PSCompatibleVersions           {1.0, 2.0, 3.0, 4.0}
    PSRemotingProtocolVersion      2.2
    I input a command from my workstation using ISE
    get-exchangeserver | Where-Object {$_.IshubtransportServer -eq $True} | Get-MessageTrackingLog -Start (get-date).AddHours(-2) -Sender '[email protected]'
    Error:
    The input object cannot be bound to any parameters for the command either because the command does not take pipeline input or the input and its properties do not match any of the 
    parameters that take pipeline input.
    The Exact same command from the Server works.
    In my profile I have the following:
    set-Location c:\
    $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'http://MyExchangeServer/powershell'
    import-pssession $Session
    Import-Module ActiveDirectory
    $host.PrivateData.ErrorForegroundColor = 'green'
    Clear-Host
    From My Workstation:
    PS C:\> Get-PSSession
     Id Name            ComputerName    State         ConfigurationName     Availability
      1 Session1        MyExchangeServer  Opened        Microsoft.Exchange       Available
    Why  does the command work on the server but not on the workstation?
    Alexis

    Hi Tiri2014,
    There are some differences between Remote PowerShell and Exchange Management Shell. You cannot use the pipeline when you run some cmdlets by using Remote PowerShell.
    Here’s a link to similar case for your reference:
    Error message when you try to pipe the result of a cmdlet into another cmdlet by using Remote Powershell in Office 365 dedicated: “The input object cannot be bound to any parameters
    for the command”
    http://support.microsoft.com/kb/2701827/en-us
    Hope it helps
    Best regards

  • The screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

    the screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

    Have you tried a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?

  • The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

    The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

    Hey thanx for the help, it worked like a charm.
    I think firefox changed the application lay out, as I used to be able to choose my PDF opener from the list at " Adobe Acrobat Forms Document' where I could choose Nitro-PDF reader, but it has now moved all the way to the bottom like you suggested to the obvious place of "Portable Document Format" section.
    If someone didn't tell me , I wouldn't have scrolled all the way down to be able to find it... it really should be with all its cousins up the top...
    Cheers again..

  • My applet works in the appletviewer but not in the navigator

    My applet works in the appletviewer but not in the navigator
    exceptions problem1 and problem2 are throwed
    this is my code
    import java.applet.*;
    import java.net.*;
    import java.io.*;
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class ValiderHtml extends Applet implements ActionListener {
    JButton send =new JButton("Connexion");
    JScrollPane jscrollpane= new JScrollPane();
    DefaultListModel lignes=new DefaultListModel();
    JList lstURL = new JList(lignes);
    BufferedReader reader = null;
    String ligne;
    URL url;
    URLConnection conn;
       public void init(){   
       this.setSize(900,400);
       setLayout( new GridLayout(2,1));
       jscrollpane.setBounds(new Rectangle(19,53,160,73));
       jscrollpane.getViewport().add(lstURL,null);
       send.addActionListener(this);
            this.add(send);
       this.add(jscrollpane);
        public void actionPerformed(ActionEvent evt) {
             Send();
       public void Send(){
            try {
       url=new URL("http://www.developpez.com");
       conn = url.openConnection();
       reader = new BufferedReader(new InputStreamReader(conn.getInputStream()));
    while ((ligne = reader.readLine()) != null) {
                     lignes.addElement(ligne);
        }//fin bloc try
       catch (Exception e) {
                   lignes.addElement("probleme1");     
                finally{
                   try{reader.close();}catch(Exception e){ lignes.addElement("probleme2");}
       }// fin Send
          public void paint(Graphics g) {
                super.paint(g);
    }// fin Applet

    As for tracking the source of your problem your applet sucks.
    Try e.printStackTrace() on a cought exception and check the (full) trace.
    url=new URL("http://www.developpez.com");
    Unless yor applet is on www.developpez.com this will throw an exception in an unsigned
    applet without special policies.
    Signing applets:
    http://forum.java.sun.com/thread.jsp?forum=63&thread=524815
    second post and last post for the java class file
    http://forum.java.sun.com/thread.jsp?forum=63&thread=409341
    4th post explaining how to set up your own policy with your own keystore

  • Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

    Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
    I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
    I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

    Which files do you have in the defaults\pref folder in the Firefox program folder?
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    See also "Other solutions":
    *http://kb.mozillazine.org/Preferences_not_saved
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Site works in the app, but not in the browser.

    Hello iWeb experts,
    I've got problems.
    Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
    Two issues...
    FONTS
    I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
    FUNCTIONS
    Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
    • The type in one nav link appears smaller than all the rest.
    • Some links are active, others are not.
    • Rollover highlighting works on some links, but not others.
    • Most of the rollover links appear in the proper static color, a few do not.
    I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
    Any thoughts, suggestions on these two issues? Thanks much for any advice.
    John
    PS - For reference, see: www.johnrunk.com

    Fascinating, Kirk (+he types with one raised eyebrow+).
    QuickTimeKirk wrote:
    When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
    I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
    QuickTimeKirk wrote:
    Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
    This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
    Thanks, QTK. I truly appreciate your troubleshooting here.
    John

  • Webutil - works in the form but not in the forms menu

    Hi
    Forms: 11.1.1.3
    Dbs: 11.2.0.2
    I have some code which calls webutil to do an AS to client file transfer.
    This works fine when called from a button in the form.
    If I have a menu on this form, and perform the same code to call webutil I get an error:
    oracle.forms.webutil.fileTransfer.FileTransfer bean not found WEBUTIL_FILE_TRANSFER.getMaxTransfer will not work
    So the same code will work when in the body of the form but not when in the menu.
    The forms has opened up and instantiated all of its objects at both times I try to run it. But it fails from the menu code call.
    Any thoughts on why one works and the other doesn't gratefull received.
    cheers
    Tony

    Hi Tony
    We also had the problem.
    solution:
    We have created a wrapper-form with in the webutil functionality has been implemented (with a dummy-Item).
    In the form we have created a When-Timer-Expired trigger and implemented the Filetransfer functionality. Then Exit_Form.
    This wrapper-form was then called from the menu.
    Alfred

  • Just bought 2 Apple 6 plus phones. Cannot get my husbands email to connect. He works for the state and not sure if that is the problem or not. All his information is correct.

    Just bought two new iPhone 6 plus phones.  Cannot get the email to load on my husbands phone for his work.  He works for the state and I don't know if that is the issue or not.  Any suggestions?

    Your husband should contact his IT department at work to find out if he is allowed to set up his work email on his personal device and if so, how to do it.

  • Why would a rented movie work on the ground but not in the air?

    This is the craziest thing.  I rented a movie from my MacBook Pro and then transferred it to my iPad 2 for a flight.  However once I got on the plane each time I tried to open it I received a message that the movie could not be opened.  OK.  I figured I made a mistake in the transfer.  Once I got home I tried to open the movie again (in Airplane mode, just to be sure) and it loaded right up.  I didn't press play since I was leaving on another flight in two days.  Got on the flight and had the exact same problem.  Once I landed I tried it again and it loaded right up, but I didn't hit play because I have another flight on Friday.  What are the odds it will occur three times in a row?  I have 20 days left on the rental and about six more flights.  This could be fun.
    To lend a little irony to the situation the movie is "Up In The Air".  Anyone have any clue what the heck is going on?  The only variable among the two instances is that in the air I had headphones plugged in, but on the ground I didn't.

    Hi Dominique:
    First-if your mac can control the camera but not see the video,
    *Open Garageband
    *Play a note or two
    *Close Garageband
    *Open iMovie
    The camera will work now-REALLY!!
    If not, look here:
    http://docs.info.apple.com/article.html?artnum=43000
    Sue

  • I do not know why but my apple ID WORKS IN THE LAPTOP BUT NOT IN THE IPOD TOUCH

    I can use it in the laptop but not in my Ipod touch!?

    What happens when you try to use it on the iPod?

  • Effect works in the preview, but not after export. (10.1.1)

    Hi all.
    I am new to FCP, making a simple slide show movie with some Ken Burns images, music and titles. For one image there is some color correction, Ken Burns, and I want the image to fade from Black and White to Color. I did this by adding the Black and White effect, choosing "show video animation" in the timeline and making the B&W effect gradually decrease. It works perfectly in the preview, but when I share the video, the effect is always missing (it just stays B&W). I have tried:
    Undoing and redoing the effect
    Exporting to different formats
    Turning off background rendering and deleting render files
    to no avail. Any thoughts?
    Thanks in advance!

    I'm hoping to avoid updating until after this movie is delivered. I find it best not to tinker with stable software mid-project. Maybe if I get desperate enough I'll give it a whirl, though.

  • Serious problem: Imovie is working from the event but not from the project

    Hi,
    Related to my other post, I have discovered that Imovie seems to be working fine in the event library, but not in the project library.
    If I use the spacebar or play buttons in the event part, it shows the film in the right top screen or even in full screen mode.
    But if I click on my project, nothing works anymore.
    Sjoerd

    Hi
    Try to make a new User/account. Log into this. Have a re-try.
    How does it work now ?
    If OK. Go back to Your first account, Take move out iMovie pref file to the desktop
    Re.start iMovie.
    Works OK ?
    iMovie pref file resides:
    Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named: com.apple.iMovie.plist
    While iMovie is NOT RUNNING - move this file out to desk-top.
    Now restart iMovie.
    Yours Bengt W

  • Sound work on the ipad but not the apps

    My son was using the Youplayer and the sound was working, then all of a sudden the sound stopped working and the sound adjustment bar disappeared

    I don't know what the Youplayer is but I assume its an app, quit the app completely and reboot the iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Want calc to work "behind the scenes, but not to appear in query"

    Hi everyone,
    Hope all is welll....
    I have a calc called: Calc_HippaToSortNumber that does:
    DECODE(Hold desc,'HIPAA',999,NULL,0,500)
    I use it in a condition:
    Calc_HippaToSortNumber = Calc_MaxHoldDesc
    I would like to delete the column from the query, yet it is still active, am getting this msg when I attempt to
    delete the column:
    column ambigously defined
    Any ideas how I can remove from query, but still keep the calc active?
    tx, Sandra

    Hi Rod,
    So I would create a condition that contains a condition on the left side:
    put the entire condition on the left side like this?
    CASE WHEN DECODE(Hold desc,'HIPAA',999,NULL,0,500) = MAX(DECODE("Hold desc",'HIPAA',999,NULL,0,500)) OVER (PARTITION BY Student.Id ) THEN 1 ELSE 0 END
    = 1
    I am a little confused:
    a) Does this condition, simply control whether the calculation shows in the query?
    b) or Does the condition also do the logic of the condition
    to select rows that are = to the max(hold desc) for the student id?
    c) If yes to (b) , then I should delete my existing condition of:
    DECODE(Hold desc,'HIPAA',999,NULL,0,500) = MAX(DECODE("Hold desc",'HIPAA',999,NULL,0,500)) OVER
    (PARTITION BY Student.Id )
    d) If yes to (c), then I always want this condition checked off, bec it contains the filtering logic, so how could
    I ever uncheck this condition so that calc should not show. If I uncheck it then the filtering would not run?
    I am puzzled ... can you pls clarify, tx, s

Maybe you are looking for