N80i "No gateway" error even when connected

Hi
I have had my n80 about a week,I have upgraded the firmware to in n80i from n80.
When I try to use wifi I get the NO GATEWAY error every time.
The phone detects the wifi connection on my Netgear router no problem
this is set with a wpa code which is correctly entered into my phone as I can connect instantly
The problem only starts when I attempt to actually browse.
The screen just turns white the error shows and thats it
I have opera installed now to try connecting but that does nothing either
A detailed description would be very helpful as there seems to be many people getting this problem
a video would be better still
please help if you can

just an update on this topic
if i use opera mini i can surf with it
iy now seems its only the built in browser is not working

Similar Messages

  • ITunes 10.7 unknown error -1500 when connect to wireless speaker. OS X 10.75  Any thoughts?

    iTunes 10.7 unknown error -1500 when connect to wireless speaker. OS X 10.75  Any thoughts?

    For reasons unknown I found copies of many of these tracks as 256 kbps .m4a files in my Trash. As such I was able to remove the existing 128 kbps .m4p (Purchased) files (but not deleting them from iCloud), add the 256 kbps .m4a files to iTunes and then Add to iCloud whereupon, the original 128 kbps listings with the download from iCloud link switched to 256 kbps (Purchased) files. For a few of the files I accidentally deleted the 128 kbps (Purchased) from iCloud and when I added the .m4a to iCloud they appeared as 256 kbps (Matched) songs instead. Not sure why the difference, but it worked for several of these problematic files. But I still don't understand why/where these .m4a versions came from as most of these purchased predated iTunes Plus (e.g., my original purchases were 128 kbps). My new list of recalcitrant files is:
    Anna Nalick: Breathe (iTunes SOTW)
    Coldplay: Parachutes (tracks 4 + 5)
    Dave Matthews Band: Stand Up (tracks 3-6, 11, 12)
    Feis: One Evening (iTunes SOTW)
    Future Leaders…: Let Me Out (iTunes SOTW)
    Hinder: Get Stoned (iTunes SOTW)
    Living Things: Ahead of the Lions (iTunes SOTW)
    Low Millions: Eleanor (iTunes SOTW)
    Spymob: Sitting Around Keeping Score (iTunes SOTW)
    As you can see, most of these are iTunes single of the week (SOTW) offerings, so I'm not too bothered about them.

  • My iphone 4 is not switching on even when connected to pc

    Hi i just dont know what happened my iphone 4 is fully charged but it suddenly switched off and was mot respomnding even when connected to pc.
    kindly give me a suggestion...................

    no it says an error has occured when syncing iphone, but there is an improvement now with sync cable and itunes symbol

  • Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
    You can download iTunes for your computer here.
    http://www.apple.com/itunes/

  • Error message when connecting to Itunes

    Keep getting this error message when connecting.
    [IMG]http://img813.imageshack.us/img813/2214/ipod.png[/IMG]
    I have uninstalled and reinstalled twice now.
    Its an Ipod Touch 8GB with front and back camera.
    Thanks

    If pic doesnt work it says
    "This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install Itunes again."

  • I am getting "Fatal Error: null" when connection to P6v8.3.2 DB using P6 Integration API

    I am getting "Fatal Error: null" when connection to P6v8.3.2 DB using P6 Integration API.
    I can connect via P6 client using admin account but cannot connect using P6 API. If I provide invalid credentials it says that the credentials are incorrect. When correct credentials are provided, it comes up with the above error.
    Stacktrace is atteched.
    Please assist.
    Thanks
    Sunil

    Hi Sunil,
    In the absence of sample code it is difficult to identify the cause. If that is not possible, you can try logging SR with Oracle support.
    Regards,
    Sachin Gupta

  • Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

    does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

    See:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Getting error message when connecting to public wi-fi, why?

    Getting error message when connecting to public wi-fi, why?

    What error message?
    Are you sure that the network is really public?

  • My iPhone shows error -50 when connect to iTunes

    my iPhone shows error -50 when connect to iTunes. What can i do?  What does it mean?

    http://support.apple.com/kb/TS1583

  • An error occurred when connecting to the accounting system ID3DEV310

    Hi Friends,
    We are Implementing collaboration project 4.5 and want to link with project system in ECC 6.0. Both these are in the different servers.
    I have done the configuration on both the servers and also maintain the RFC (ID3DEV310) in Object Links.
    When I create or open the existing project I get the following error: "An error occurred when connecting to the accounting system ID3DEV310"
    Costing Variant taken is PS01 (Project Planning).
    Your reply would be highly appreciated.
    Aryan

    Hi Deepak,
    I have assigned the RFC destination and web server to the object type: "0WBSELEMENT" only
    Also the same has been done for define Object links for accounting integration "0FIN_INT_ERP_PS"
    I have entered these specific to PS objects only.
    Aryan

  • My MacBook Pro will not powerup (even when connected to power supply).

    My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.

    Hi PatB11902,
    Thank you for visiting Apple Support Communities.
    If your MacBook Pro does not seem to power on, but the caps lock key will light up when you press the caps lock key, you are likely seeing a video issue.
    There are several steps that can help troubleshoot this behavior, found at this link:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Start with these steps:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Start up in Safe Mode.
    If your Mac does not start up normally after these steps, here are some additional tips that can help:
    Troubleshooting: My computer won't turn on - Apple Support
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Sincerely,
    Jeremy

  • My ipod touch is completely unresponsive.  Will not turn on at all even when connected to power???? HELP!!!

    ipod touch completely unresponsive.  will not turn on at all even when connected to power source.  is it dead????

    After charging for at least an hour reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next connect the iPod to your computer and see if iTunes sees the iPod.  If it does try restoring the iPod via iTunes.  If it is not visible try the following to make it visible:
    --- Place it in recovery mode via:
    iPhone and iPod touch: Unable to update or restore
    --- Place in DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Language Init Error (8020) when connecting to the DI

    Dear All,
    I've got the error message Language Init Error (8020) when connecting to the DI, I could not understand how could it be happened but I have tried to find the solution for it but still unsuccessful ? How to solve ? TIA
    Rgds,
    Edu

    Hello,
    This solution I've got from SAP Notes 854548 and I rewrite here as follows;
    1. Rename the folder SM_OBS_DLL from the temp folder. If you can't find, try to go to start --> run and type %temp%.
    Then you perform these steps :
       1. Uninstall the DI from the Add/Remove Programs window
       2. Reboot the computer
       3. Install the DI API once again
    If you still can't have solution and the solution from Chris can't resolve too, better to escalate to SAP support.
    Rgds,
    JM

  • I have a problem with my iPad 1 st. the problem is that I unable to locate even when connected to a WiFi network and the location is activated and restore and same thing happens .. may be I need help!  Thank you ...!

    I have a problem with my iPad 1 st. the problem is that I unable to locate even when connected to a WiFi network and the location is activated and restore and same thing happens .. may be I need help!
    Thank you ...!

    Hi there beni_m,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • HT1688 My iPhone 4 will not turn on even when connected to a charger?

    My iphone 4 is dead. Will not turn on even when connected to a charger. Have tried simultaneously pressing the wake/home buttons to no avail.

    Hello fredswolf,
    Thanks for the follow up and additional information. Based on the information you have provided, your iPhone may need to be serviced. The following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
    Apple - Support - Service Answer Center
    http://www.apple.com/support/iphone/service/faq/
    Thanks,
    Matt M.

Maybe you are looking for

  • Is it possible for illustrator (cs5 or later) to open/maintain original PDF layers?

    I want to edit a map that I found on the USGS.gov website.  From that site, I've downloaded a PDF file which is organized into a few layers.  Of course when I open it, illustrator has all the content grouped together and on one layer. I am a long tim

  • Should I erase or "zero"

    I have read previous posts about this, and read article 107437 on "How to zero all data on disk", but am still unsure what to do. I am a novice, so it may be the terminology. Anyway, I apologize if this has already been explained and I just dont get

  • Migration on Production from Development

    Hi, I have no idea about migration from development to production. First time I'll be doing this on my own. Could you please guide me on this. Development Environment is as: HFM - 11.1.2.1 EAL - 11.1.1.4 Essbase - 11.1.2.1 OBIEE - 11.1.1.7 HFM is alr

  • Flash MX 2004 component dataSource

    I need to edit a menu bar Flash component that was bundeled with Flash MX 2004. I like to be able to change the COLOR of the menu bar buttons. I am not sure how to edit this dataSource component in Flash CS4. The xml document assosiated with the Flas

  • Calling my servlet from browesr

    Hello, I asked a similar question recently but now have a slightly better understanding of my problem. I have a servlet running on localhost which i wish to forward all request messages to. i.e Every request for a page will go to the servlet. My reas