N80ie freezes up!! help!

my 1 week old n80ie keeps freezing up, help!? think it has something to do with the minisd (256mb Nokia) that came with the phone, cause everytime I try opening apps located in minisd the phone freezes. if I remove the minisd the phone works just fine! is it the phone there's something wrong with or the minisd? any ideas what to do, anyone else had this prob?

Hey It reminds me off of an incident that happened last year, I bought an NGAGEQD and later I bought an 256 mb MMC and then this problem started.In mY CASE IT WONT EVEN STARTED.
bUT ALAS!I thought it was a defect to that MMC given it to my cousin and it just worked fine on my cousins SIEMENS SX1.
I think you guyz are assuming the right thing-it may be with the phones problem.

Similar Messages

  • Everytime i eject my ipod and reconnect it all my music is gone. and sometimes while i try adding music to it. itunes completely freezes. please help. and sometimes when i plug it back into my PC i have to rename my ipod and such

    Everytime i eject my ipod and reconnect it all my music is gone. and sometimes while i try adding music to it. itunes completely freezes. please help. and sometimes when i plug it back into my PC i have to rename my ipod and such

    Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your Ipod to the PC
    When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well, since you got such a huge library.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    If this doesn't resolve your problem, then let me know.
    Good Luck!

  • HT4623 My iPad 1 keeps freezing when I try to set up an account with the apple store .Insert all details including payment details. The screen turns grey colour and then freezes. Help,,,,,,

    My iPad 1keeps freezing every time I try to access apple store. I complete all the information including payment account details lithe screen turns grey colour and then freezes . Help please.

    App store or Apple store

  • My ipad is freez...it only show a home screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds and see if you can get it to reboot.

  • My ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.plz help me.................thx u

    Option 1
    Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You need to be patient and repeat the above many times to recover your iPad

  • My CS6 photoshop started showing cannot perform function programming error then it started freezing please help?

    My CS6 photoshop started showing {cannot perform function programming error}
    then it started freezing please help?

    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • Lock-Ups and Freezes PLEASE HELP

    Hello everyone..
    I come here to see if anyone can help me... Ive done it all and nothing is working.
    I just recently started having problems with my computer, im not sure why this happend but ill try to explain everything as best as I can.
    The problem started a few days ago while I was playing SWG's. I was playing and all of a sudden my machine froze, the screen locked-up and then after about 2 min the entire system restarted. I then logged back into my windows and after a while a system froze and restarted yet again. I though it was a SWGs issue but then the computer would freeze while browsing the net and doing other tasks.
    I have formated my machine, re-installed my drivers, and re-installed the hardward. Nothing has worked.
    My computer specs are
    300watt PSU Enermax True Power
    MSI K7n2 nforce2 8xagp mobo
    athon 1700xp
    512mb of Kingmax DDR 2700
    SB audigy x-gamer sound card
    MSI geforce4 ti 4200 8xAGP graphics card
    Hope thats enough..
    One last thing... When my computer restarts after the problem i get a message asking me to report the problem to microsoft... i located the error file and this is what was writen in it....
    // Watchdog Event Log File
    LogType: Watchdog
    Created: 2003-07-19 01:30:24
    TimeZone: 300 - Eastern Standard Time
    WindowsVersion: XP
    EventType: 0xEA - Thread Stuck in Device Driver
    // The driver for the display device got stuck in an infinite loop. This
    // usually indicates a problem with the device itself or with the device
    // driver programming the hardware incorrectly. Please check with your
    // display device vendor for any driver updates.
    ShutdownCount: 5
    Shutdown: 0
    EventCount: 5
    BreakCount: 5
    BugcheckTriggered: 1
    DebuggerNotPresent: 1
    DriverName: nv4_disp
    EventFlag: 1
    DeviceClass: Display
    DeviceDescription: MSI MS-StarForce GeForce4 Ti 4200 with 8X (NVIDIA GeForce4 Ti 4200 with AGP8X)
    HardwareID: PCI\VEN_10DE&DEV_0281&SUBSYS_89431462&REV_A1
    Manufacturer: NVIDIA
    DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0C1C 0006000D 000A0C1C 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
    DriverCompanyName: NVIDIA Corporation
    DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
    DriverFileVersion: 6.13.10.3100
    DriverInternalName: nv_disp.dll
    DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
    DriverOriginalFilename: nv_disp.dll
    DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
    DriverProductVersion: 6.13.10.3100
    Hope this helps, i dont understand what it means so maybe one of you might...
    Please help me on this... Ive tried everything i can...
    Thanks in advance

    If what you are saying, and I am reading correctly:
    The machine and game was working just peachy and all of a sudden the problem manifested itself?
    Did you do ANYTHING to change your system prior to this happening to possibly have an effect?
    the fast that you said you have re-loaded the OS and removed and re-installed the hardware with the same result tells me that there may be some sort of hardware failure and this could get difficult to troubleshoot.
    First things first, try a memory testing software like memtest86 to see if you get any errors.
    http://www.memtest86.com/

  • Computer freezes -- PLEASE HELP

    Each time a new song starts on my iTunes, about 10 seconds into the song my memory usage for iTunes will shoot up from 53,000K to 85,000K and will cause everything I am doing on my computer to freeze up for about 5-10 seconds. Like I said, this happens for each successive song. I have a 13,000+ song library and did not have this problem with iTunes 4.9 -- I recently updated to 5.0.1 and started experiencing this. So, I tried uninstalling 5.0.1 and reinstalling 4.9, but the same problem was now happening there as well. This is NOT a problem with my hardware, it is more than sufficient to support this usage, and happens even when iTunes is the only program running on the computer. PLEASE HELP, it is very annoying to have to stop what I'm doing and wait for 5 seconds each time a new song starts.

    Boot from your original Tiger cd and run Disk Utility Repair Disk from there - it can repair directory problems which can't be fixed from normal Disk Utility.
    If that doesn't work, an archive and reinstall of Tiger might be best - it's pretty simple and can save weeks of trying to track down and fix an obscure problem. Just make sure you thoroughly backup first. Check Apple's website for instructions http://docs.info.apple.com/article.html?artnum=107120. Disconnect all peripherals while you reinstall.
    Once Tiger's reinstalled, download the combo update from here http://www.apple.com/support/downloads/ (Note - don't use Software update for this). Re-attach peripherals one-by-one to see if anything is still upsetting Tiger.
    I would then recommend you install third party software Macaroni, http://www.atomicbird.com/ to automate the necessary admin tasks needed to keep OSX in tip-top shape.
    2GHz dual G5, 23" panel   Mac OS X (10.4.7)  

  • MacBook Pro system freezes - please help!

    Hi there,
    I've been experiencing some system freezes with my MBP recently. I have all the most recent software updates installed and there's really no detectable pattern to the freezes. I usually notice it when the screen has been blanked out for a while -- I'll come back, swipe the trackpad, and the screen will turn on, but the screensaver will be stuck in a certain position, and although the cursor will move no applications will respond and I am forced to hard-reboot by holding the power button down. I've checked some of the logs in Console to see if anything has been noted but haven't had any joy so far. I can't think of anything specific to start looking -- any advice will be REALLY helpful. I've searched the forums but haven't found anything that helps.
    Thanks in advance!

    Hello,
    Thank your informative post, as it helps us to troubleshoot much quicker!
    You didn't indicate that you had tried resetting the SMC, (System Management Controller) .. so go here, read the information first and follow the instructions... that could be the answer.
    If after trying this applications still won't launch or respond, post back.
    Carolyn

  • ITunes 7.02 FREEZES - please help!

    So I upgraded to 7.02 because my computer was stalking me to do so. Now when I open iTunes it freezes while it is trying to define "gapless playback" I really don't care about gapless playback, I just want any playback and I can't figure out how to make it stop and I hate the new iTunes and I need to be able to get to my music. Can someone help me free my computer of the need to insure gapless playback????

    Version 7.0.2.16
    okay. with that message on earlier versions (itunes 7.0.0.70 and 7.0.1.8), some folks had some success with pgfpdwife's technique in the following post:
    pgfpdwife: Re: Could not open key HKEYLOCALMACHINE\Software\Classic\Quicktime.Quicktime\
    note carefully that the technique involves a registry edit. be sure to make a backup of any keys you edit. if you're unfamiliar with your registry or registry editing, head to your XP help and support, do a search on registry, and read through the articles that come up.
    There are also some instructions on how to back up registry keys in the following document:
    Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows
    is that of any help with your 7.0.2.16 version of this?

  • Log and capture freezes - please help

    hi,
    I'm using FCP 5 (studio). on G5 dual 2GH 1GB.
    it has become a nightmare to log and capture. after few minutes from working with log and capture the applications freezes. I have to force quit FCP.
    I trashed the preferences once, I re-installed, but the same thing is happening. I'm working on 2 projects, deadline is approaching.
    I appreciate any helpful responses.
    sz

    Are you trying to record three video streams simultaneously? Or by a video amplifier, you mean a video switcher?
    If you are using Capture Now, make sure you have set a capture limit. This is why:
    When you use log and capture, the disk system is being asked by FCP to essentially "keep capturing until we tell you to stop ... and no, we don't know HOW much that will be either." It is stressful on the system to be continually wandering around looking for space to stuff those ones and zeros with out any sense of how many they have to accommodate. One solution available to the system is to allocate the ENTIRE empty space on the disk as the potential capture file. This essentially locks the machine as there is no headroom for basic disk operations.
    However if you set a limit on capture now, say 60 minutes, the disk system can allocate the space and may seem to be less confused by the process. It still does not know EXACTLY how much you want, but it knows you will not want MORE THAN the limit and therefor can reduce some of the uncertainty.
    Better yet is to record to a timecode addressable tape. This allows you to log the tape, then use batch capture. When you do this, the system knows EXACTLY how much space to allocate for each file and is very efficient.
    Good luck.
    x

  • PLEASE HELP! my iPod got stolen but i got it back . and now it can be off i try to charge it and it would go to the silver apple and it would have a loading circle and it freezes |: PLEASE HELP

    PLEASE HELP! my iPod got stolen but i got it back . and now it can be off i try to charge it and it would go to the silver apple and it would have a loading circle and it freezes |: PLEASE HELP

    Hi,
    This Link contains the Steps on How to Restore your Device...
    http://support.apple.com/kb/HT1414
    Cheers,
    More Support Here:
    http://www.apple.com/support/ipod/

  • Leopard slows down and freezes - please help

    I'm running Leopard on a Macbook and I have had startup problems and slowdowns in general a couple of days now.
    When I start up the machine I get the apple logo, the spinning circle and then the blue screen for about 2-3 minutes before I get my Leopard wallpaper. It then takes another 3-4 minutes before the dock and icons load up and usually a couple of minutes before I can actually access the desktop.
    The whole startup usually took me less than 2 minutes total and is now as you can see a much longer process.
    Once in Leopard applications take much longer to load than usual and often freeze or stop responding. I get the colored spinning disc a lot and it seems like Leopard is using a lot of time loading up even simple apps like iCal and Mail.
    I'm not sure but it seems like Finder is the problem. I have tried restarting Finder a couple of times and this always gives me the gray screen telling me to restart Leopard by holding the power button.
    I have no idea why this has happened, I haven't installed any big apps or used up a lot of the HD space. I still have approx 85GB on my HD so that shouldn't be the problem.
    I have of course tried the basic troubleshooting such as restarting and verifying/repairing disk permissions in Disk Utility so I don't know what else to do.
    Any suggestions, tips, or ideas are truly appreciated. I really want my old Mac back, the waiting is driving me nuts.
    Thanks
    Dave
    Message was edited by: davelovesmac

    Kenichi Watanabe wrote:
    Did Verify report any errors? Did you try starting up from the Leopard installation disk and running Disk Utility from the Installer's Utilities menu, then running Repair Disk?
    Verify didn't report any errors so that didn't really help.
    I have just popped in my Leopard disk but there doesn't seem to be a menu for "utilities". My options are "Install Mac OS X", "Optional installs" (which doesn't have a Repair Disk option", and "Instructions".
    Did your MacBook come with Leopard, or did you install the upgrade over your Tiger system?
    The machine came with Tiger so I bought Leopard seperately, formatted the HD and did a clean install. But this was back when Leopard came out and I haven't had any problems with the OS until now.

  • Logic 8 Crashes and Freezes - please help

    Just got my Logic Studio Upgrade (from Pro 7) and installed it.
    First time I launched, I got one of those scary complete system hardware crashes (where the screen goes grey) as soon as it started scanning for plug-ins. After I rebooted, I removed all my plugins and launched again. Now it freezes as soon as it startts looking for Auddio Unit plug-ins, eventually throws up a crash dial;ogue and has to be forcable quit.
    If anyone had any ideas on how I might get things working, I'd be extremely grateful.
    Many thanks in advance for any help.
    Jules
    PS. System is Mac Pro 8 Core, 8GB Ram, OS 10.4.9

    FWIW, the crashlog is pasted below:
    Date/Time: 2007-09-14 16:01:40.610 +0100
    OS Version: 10.4.10 (Build 8R2232)
    Report Version: 4
    Command: Logic Pro
    Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
    Parent: WindowServer [101]
    Version: 8.0.0 (1437.23)
    Build Version: 12
    Project Name: Logic
    Source Version: 14372300
    PID: 328
    Thread: 0
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
    Thread 0 Crashed:
    0 com.apple.logic.pro 0x0041d863 0x1000 + 4311139
    1 com.apple.logic.pro 0x0042395b 0x1000 + 4335963
    2 com.apple.logic.pro 0x0041da09 0x1000 + 4311561
    3 com.apple.logic.pro 0x002e242c 0x1000 + 3019820
    4 com.apple.logic.pro 0x002e386b 0x1000 + 3025003
    5 com.apple.logic.pro 0x003f5cda 0x1000 + 4148442
    6 com.apple.logic.pro 0x003ec250 0x1000 + 4108880
    7 com.apple.logic.pro 0x000121fa 0x1000 + 70138
    8 com.apple.logic.pro 0x001a9ebb 0x1000 + 1740475
    9 com.apple.logic.pro 0x0052f621 0x1000 + 5432865
    10 com.apple.AppKit 0x933503af -[NSWindow sendEvent:] + 5279
    11 com.apple.prokit 0x959aa206 -[NSProWindow sendEvent:] + 268
    12 com.apple.AppKit 0x93342350 -[NSApplication sendEvent:] + 5023
    13 com.apple.logic.pro 0x004cced7 0x1000 + 5029591
    14 com.apple.AppKit 0x9326cdfe -[NSApplication run] + 547
    15 com.apple.prokit 0x95987958 NSProApplicationMain + 324
    16 com.apple.logic.pro 0x00003bf2 0x1000 + 11250
    17 com.apple.logic.pro 0x00003b19 0x1000 + 11033
    Thread 1:
    0 libSystem.B.dylib 0x90009cd7 machmsgtrap + 7
    1 com.apple.CoreFoundation 0x9082d2b3 CFRunLoopRunSpecific + 2014
    2 com.apple.CoreFoundation 0x9083e188 CFRunLoopRun + 60
    3 com.apple.DVCPROHDMuxer 0x193ee0fb AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*) + 297
    4 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 2:
    0 libSystem.B.dylib 0x90009cd7 machmsgtrap + 7
    1 com.apple.CoreFoundation 0x9082d2b3 CFRunLoopRunSpecific + 2014
    2 com.apple.CoreFoundation 0x9082cace CFRunLoopRunInMode + 61
    3 com.apple.audio.CoreAudio 0x9146941e HALRunLoop::OwnThread(void*) + 158
    4 com.apple.audio.CoreAudio 0x91469239 CAPThread::Entry(CAPThread*) + 93
    5 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 3:
    0 libSystem.B.dylib 0x9001a1cc select + 12
    1 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 4:
    0 libSystem.B.dylib 0x900248c7 semaphorewait_signaltrap + 7
    1 com.apple.logic.pro 0x00622e80 0x1000 + 6430336
    2 com.apple.logic.pro 0x00622f47 0x1000 + 6430535
    3 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 5:
    0 libSystem.B.dylib 0x900248c7 semaphorewait_signaltrap + 7
    1 com.apple.logic.pro 0x00622e80 0x1000 + 6430336
    2 com.apple.logic.pro 0x00622f47 0x1000 + 6430535
    3 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 6:
    0 libSystem.B.dylib 0x90047dd7 semaphoretimedwait_signaltrap + 7
    1 com.apple.audio.CoreAudio 0x9147665c CAGuard::WaitFor(unsigned long long) + 212
    2 com.apple.audio.CoreAudio 0x9147657e CAGuard::WaitUntil(unsigned long long) + 66
    3 com.apple.audio.CoreAudio 0x91474efa HP_IOThread::WorkLoop() + 690
    4 com.apple.audio.CoreAudio 0x91474c43 HPIOThread::ThreadEntry(HPIOThread*) + 17
    5 com.apple.audio.CoreAudio 0x91469239 CAPThread::Entry(CAPThread*) + 93
    6 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 7:
    0 libSystem.B.dylib 0x90037b57 machwaituntil + 7
    1 ...ple.CoreServices.CarbonCore 0x90ce6319 Delay + 118
    2 ...opellerheads.rewire.library 0x235fc7e8 RWPUnregisterDeviceImp + 21574
    3 ...opellerheads.rewire.library 0x23617a5c RWPUnregisterDeviceImp + 132794
    4 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 8:
    0 libSystem.B.dylib 0x90047dd7 semaphoretimedwait_signaltrap + 7
    1 ...ple.CoreServices.CarbonCore 0x90ce1da9 TSWaitOnSemaphoreCommon + 163
    2 ...ple.CoreServices.CarbonCore 0x90ce8d91 TimerThread + 87
    3 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 9:
    0 libSystem.B.dylib 0x9002493f semaphorewaittrap + 7
    1 com.apple.logic.pro 0x00111218 0x1000 + 1114648
    2 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 10:
    0 libSystem.B.dylib 0x9002493f semaphorewaittrap + 7
    1 com.apple.logic.pro 0x00111140 0x1000 + 1114432
    2 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 11:
    0 libSystem.B.dylib 0x9002493f semaphorewaittrap + 7
    1 com.apple.logic.pro 0x00111068 0x1000 + 1114216
    2 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 12:
    0 libSystem.B.dylib 0x9002493f semaphorewaittrap + 7
    1 com.apple.logic.pro 0x00110f90 0x1000 + 1114000
    2 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 13:
    0 libSystem.B.dylib 0x9002493f semaphorewaittrap + 7
    1 com.apple.logic.pro 0x00110eb8 0x1000 + 1113784
    2 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 14:
    0 libSystem.B.dylib 0x9002493f semaphorewaittrap + 7
    1 com.apple.logic.pro 0x00110de0 0x1000 + 1113568
    2 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 15:
    0 libSystem.B.dylib 0x9002493f semaphorewaittrap + 7
    1 com.apple.logic.pro 0x0011132a 0x1000 + 1114922
    2 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 0 crashed with X86 Thread State (32-bit):
    eax: 0x00000000 ebx: 0x00000000 ecx: 0x00000000 edx: 0x00000000
    edi: 0x00000000 esi: 0x00000001 ebp: 0xbffff678 esp: 0xbffff660
    ss: 0x0000001f efl: 0x00010246 eip: 0x0041d863 cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037

  • IMac loudly whirs and freezes. please help!

    I have a 27" iMac purchased November 2009. Have tried searching discussions for help but am unsure what to call the problem as it is so peculiar!
    Several times an hour it makes a strange loud whirring noise (which does not appear to be a fan to me as it is not a smooth sound, sounds more like a hard drive 'thinking' possibly?? but I have no idea) and freezes until the noise stops (which generally takes anywhere between 10-30 seconds). Very frustrating as it interupts my workflow and all I can do is wait it out. It does not seem to matter how many/which applications are running. it happens when i have creative suite open but then it also happens if all i have open is chrome!
    It is within warranty, however I have no time to take it to be fixed until November as I can't be without it until then, so am hoping someone will have a suggestion to help me out!
    I don't know what other information would be helpful, but just in case, it has 4GB of RAM and has a 3.06 GHz Intel Core 2 Duo processor and still has about 775GB of hard drive space free.
    would doing a fresh install of my OS help?
    any advice you can give me would be appreciated! or point me towards an existing discussion (all i could find were people describing their whirring noise as a buzzing, and mine is definitely not buzzing)

    My first thought would be the hard drive, you may not have time to get it check out until November
    but think about what you might loose if you don't. Just have a great backup plan for a just
    incase scenario
    If its not a harddrive, what ever you have going on is not good, as your aware of, you need to
    reevaluate and think about if you lost what you have verses not having access to your files.
    I assume you have contacted Apple support on the phone, to see what they might have to say
    Its nothing to fool with in my opinion
    Mike

Maybe you are looking for

  • I cannot erase e-mail messages I have read

    We have a new iPad2.  My wife enjoys reading and sending e-mails using the Mail app.  However for some reason she cannot erase any of the messages she receives.  The error message is that the message cannot be placed in the Trash Basket.  What are we

  • Display special character on web page

    Hello, Is it possible to display the special character < or > in a bsp page ? I try to do it but it seams to be interpreted as HTML and nothing is printed. In material description in purchase requisition we have < material desc > and I would like to

  • Custom Title for Webclip

    I was wondering if there is any way to create a custom name for the Weblcip (other than the title of you web page). Currently I have the following code in my page: <head> <title>--- My Page Title is very long ---</title> <link rel="apple-touch-icon"

  • 20 State Limit

    I am trying out this software. Its easy to use and straight forward. What will prevent me from using it is the 20 State limit. I am building a court exhibit that will have over 200 exhibit images. Some, of these images will have roll-overs showing ph

  • DDE (EXCEL) Question in Forms 6i

    Hello, I need to open excel for showing some data from one table. I wanted to do it with DDE (I believed it would be better ??), so I've done this procedure: PROCEDURE show_excel IS ConvID PLS_INTEGER; BEGIN CONVID:=DDE.Initiate('EXCEL.EXE', 'C:\abc.