N81 BUG: date jumps to nearest event entry(date) i...

Hello folks,
I have the following issue:
After firmware update to 21.0.010 I found a weired bug: In may case I have a Calendar entry for 18 September of type "Anniversary" with alarm turned on for the same day (time 13:00) and I have noticed in the last few days (few days before and till 18 Sept) that my clock (date) start to jumps from current day (lets say that current day was 14 Sept) always and directly to 18 September any time I watch my phone in the morning (maybe there is something to do with the fact that I setup my phone every day to wake me up for the work and I also turn my phone off every night, so nobody bothers me till the morning when the phone turns on by itself and wakes me up).
This behavior wasn't there in firmware v20.x.xx, because the phone never behaved like this before for the other events.
Btw Network operator time (Clock's settings) is turned off, but I've also tried to turn on, but the behavior stayed the same.
I hope someone from Nokia team will see it.
V 21.0.010
My phone: RM-223
Nokia N81 (05.01)
Prod code: 0550138

Try to tap and hold for a couple of seconds in the day view, until you see a Green block appear. Once you see just let go anf you will see that you have an option to edit your event.

Similar Messages

SD Billing to FI Accounting: How to make Baseline Date equal to Entry Date?

Hello,
I have configured Baseline Date to be equal to Entry Date in the Payments Terms in OBB8. I have assigned this payment term to the Customer as well as the Sales Order.
But still, when I release a Billing Document to accounting through VFX3, the Baseline Date in the Accounting Document is taken as the Document Date/Posting Date.
What does the configuration in Payment Terms do?
How can I get the Baseline Date to equal the Entry Date?
Any help is greatly appreciated.
Cheers!
Bharath

Just copy from the standrad delivered 0001 to some Z001 and change the date to entry date.
For me it is working fine. Also try first individually using FB60 or FB70 to llok at the behaviuor of the system.
reward if useful
sarma

Search by entry date?

Hello all,
Is it possible to search all of the entries in a certain account by entry date? I need to find a specific entry that changed the monthly numbers although it was entered more than a few weeks after the books were closed.
Your help is appreciated, thanks!

Hi CeemoJenkins,
Try with t-code S_ALR_87012332 - G/L Account Statements
There is Icon "Dynamic Selections". This icon you can easily identify which is generally located either after "Execute" icon or "Get Variant" icon. These icons are available on top left of the S_ALR_87012332 screen. Click/Select Icon "Dynamic Selections", you will find fields "Entry date" and "posting Date".
Enter the date range for june in Entry date field
Enter the posting date range for May in Posting date field.
You will able to find the entries made in June for May.
You can also find the entry date date and posting date fields in t-code FB03.
You can also get these details from table e.g BKPF. Field names - BKPF-BUDAT, BKPF-CPUDT, BLPF-CPUTM.
Thanks & Regards,
ADI

Entry date correction

i have to correct entry date .
Actual entry date lies after the incorrect entry date.
how can i access these two functions:-
Incorrect entry
Corrected entry
regards
niki

if u run the pay roll
than delete the data
and try to run again by giving correct date
https://forums.sdn.sap.com/click.jspa?searchID=12407083&messageID=5433063
check this thread
Edited by: Sikindar on Jun 2, 2008 2:02 PM

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

Extraction and loading of Training and Event Management data (0HR_PE_1)

hello,
I've got the following doubt:
before BI 7.0 release, extractor 0HR_PE_1 extracts event data (eventid, attendee id, calday,...) but if you load straight to cube 0PE_C01, as Calendar year/month needs a reference date (for example, event start date), you'll get total duration of event in hours or days refered to event star date.
So in a query filtered by month, you get total duration of an event that starts in the filtered month but it couldn`t end until few months later o year later, so you don´t get appropiate information.
Example:
Event calday Hours
10004377 20081120 500 but from event_attr event end date is 20090410.
In a query filtered by 200811 you get total duration time (500 hours when in 200811 event hours have been 20) or if you filter by any month of 2009 you don´t get information of duration of that event.
I had to create a copy of standar cube (without calday, only Calendar year/month, Calendar year in time dimension) and disaggrate data creating as many entries for an event as months lasts and adjust calculation of ratios duration of event (duration of event in each month/ total duration of event).
The question is: Is there any improvement or change on business content in BI 7.0 to treat Training and Event Management data? Has anybody had to deal with that?
Thank you very much.
IRB

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

How do I create a new event entry for a specific calendar?

In my iMac Calendar app, I have created a few calendars for different functions. But every time I try to create a new event entry for a specific calendar, the app seems to prefer a different calendar instead by default. I cannot enter events in other calendars. Is there a way to do this? In previous versions, I would highlight the particular calendar I wanted to work with and the entry would go into that calendar. Thanks!

You don't. Moments in Photos are the new Events, i.e. groupings of photos sorted by date taken.
When the iPhoto Library was first migrated to Photos there was a folder created in the sidebar titled iPhoto Events and all migrated iPhoto Events (which are now Moments) are represented by an album in that folder. To open the sidebar if it's not already open use the Option+Command+S key combination.
There's a way to simulate events in Photos.
When new photos are imported into the Photos library go to the Last Import smart album, select all the photos and use the File ➙ New Album menu option or use the key combination Command+N. Name it as desired. It will appear just above the iPhoto Events folder where you can drag it into the iPhoto Events folder
When you click on the iPhoto Events folder you'll get a simulated iPhoto Events window.
The downside to the simulation is that the Albums/Events can only be sorted automatically by Title. But they can also be sorted manually, either in the sidebar or in the folder's window at the right.
Ask Apple for more sorting options in Photos via https://www.apple.com/feedback/photos.html.

Wrong date format by importing event from mail

When I try to create a new event in ical through a date in mail, it identifies the date in american format (MM/DD/YYYY) instead of the european format (DD/MM/YYYY)/
In the system prefs and in ical itself (when creating a stand-alone event) the format is correct. How can I import the date also through mail in the european format?

The system properties that Java can obtain through the static method System.getProperty() is the following 47:
java.runtime.name
sun.boot.library.path
java.vm.version
gopherProxySet
java.vm.vendor
java.vendor.url
path.separator
java.vm.name
file.encoding.pkg
java.vm.specification.name
user.dir
java.runtime.version
java.awt.graphicsenv
os.arch
java.io.tmpdir
line.separator
java.vm.specification.vendor
java.awt.fonts
os.name
java.library.path
java.specification.name
java.class.version
os.version
user.home
user.timezone
java.awt.printerjob
file.encoding
java.specification.version
user.name
java.class.path
java.vm.specification.version
java.home
user.language
java.specification.vendor
awt.toolkit
java.vm.info
java.version
java.ext.dirs
sun.boot.class.path
java.vendor
file.separator
java.vendor.url.bug
sun.cpu.endian
sun.io.unicode.encoding
mrj.version
user.region
sun.cpu.isalist
............................

[svn:osmf:] 12656: Fix bug FM-257: Rename durationReached event type to complete.

Revision: 12656
Revision: 12656
Author:   [email protected]
Date:     2009-12-08 09:45:59 -0800 (Tue, 08 Dec 2009)
Log Message:
Fix bug FM-257: Rename durationReached event type to complete. Also, updated unit tests to be in sync with latest changes (including loc work).
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-257
Modified Paths:
    osmf/branches/flex4/framework/MediaFramework/org/osmf/composition/CompositeTemporalTrait. as
    osmf/branches/flex4/framework/MediaFramework/org/osmf/events/TimeEvent.as
    osmf/branches/flex4/framework/MediaFramework/org/osmf/media/MediaPlayer.as
    osmf/branches/flex4/framework/MediaFramework/org/osmf/proxies/ListenerProxyElement.as
    osmf/branches/flex4/framework/MediaFramework/org/osmf/proxies/TemporalProxyElement.as
    osmf/branches/flex4/framework/MediaFramework/org/osmf/traits/ITemporal.as
    osmf/branches/flex4/framework/MediaFramework/org/osmf/traits/TemporalTrait.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/audio/TestAudioTemporalTrai t.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/composition/TestCompositeMe tadata.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/composition/TestParallelEle ment.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/composition/TestParallelSwi tchableTrait.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/composition/TestSerialEleme nt.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/content/TestContentLoader.a s
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/image/TestImageLoader.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/media/TestMediaPlayer.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/metadata/TestMetadata.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/metadata/TestMetadataUtils. as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/net/dynamicstreaming/TestDy namicStreamingResource.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/plugin/TestDynamicPluginLoa der.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/swf/TestSWFLoader.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/traits/TestLoaderBase.as
    osmf/branches/flex4/framework/MediaFrameworkFlexTest/org/osmf/traits/TestTemporalTrait.as
    osmf/branches/flex4/libs/VAST/org/osmf/vast/media/VASTImpressionProxyElement.as
    osmf/branches/flex4/libs/VAST/org/osmf/vast/media/VASTTrackingProxyElement.as

How to correct incorrect entry date?

Hi,
The scenario is as follows:-
Employees are hired from 01.01.2000
Payroll has run till last month(28.02.2007)
Now, few employees hire date has to be back-dated (01.01.1998)
The following should not happen in the event of the date getting changed.
Should not delete clusters
Payroll should not trigger retro, even if it triggers it has to be controlled
Infotypes 7 and 8 need not be changed, means date can be 01.01.2000
What i did:-
Changed the payroll status
Applied PA41
This is the suggestion offered by library in the event of correcting entry after having run payroll. But, it doesn't work, moreover action types incorrect entry and correct date are not available and library mentions that the action types are not available as it will be used in exceptional circumstances. It allows to change the entry date if i delete the clusters.
Mailing to the forum after having tried several times!
Appreciate the inputs.
Regards
KK

Hello Manoj,
I deleted the "accounted to" and deleted ERA as well.
But when i try to correct the action date, it doesn't allow me to change the date to 01.01.1998. Hope you'd have read my thread precisely!
When i try to correct actions, the action types "incorrect entry" and "correct entries" are missing. Unless, i delete the clusters, it doesn't allow me to change the entry date.
More inputs!
Regards
KK

[svn:osmf:] 15527: Fix bug FM-696: Capability change events being dispatched after the trait to which they refer has been modified .

Revision: 15527
Revision: 15527
Author:   [email protected]
Date:     2010-04-16 17:21:06 -0700 (Fri, 16 Apr 2010)
Log Message:
Fix bug FM-696: Capability change events being dispatched after the trait to which they refer has been modified. Updated unit tests.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-696
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/media/MediaPlayer.as
    osmf/trunk/framework/OSMFTest/org/osmf/media/TestMediaPlayer.as

Major Update: The G-Keys can now be edited without recompiling by editing shell scripts at "/usr/share/g15daemon/macros/"
Each button has it's own script file named by it's label (e.g. to edit the functionality of G1, open the script named G1.) The button will try to execute the scripts as programs, so make sure they are executable (chmod +x) and as long as the name remains the same, if you want to replace the files with something different, know that the arguments currently given to the files ($1 and $2) are ($1)on/off and ($2)0-2 (where 0 is M1 and 2 is M3)
To download the updated sources, go here (only the g15daemon source/patch was updated). This thread's OP has been updated.
Last edited by rabcor (2015-02-12 04:46:48)

Training and Event Management Data Load

Hello Team
Would appreciate if any of you can advice on how to load Training and Event management data. I think its stored in HRP tables.
I'm working on an upgrade assignment.
Thanks

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Photos. They are on my macBook, backed up on time machine. Copied them (hours and hours) to external hard drive. They are now in alphabetical order (19,000 of them) NOT IN THEIR EVENTS or date order-and have been taken with different cameras- help!!!!!!

Photos.
They are on my macBook, backed up on time machine. There are 19,000+ of them, some rescued from a pc crash- which I used the nifty iPhoto to put back into date order.
I want to take them all off my laptop, now............as I need to use it for WORK!!
Copied them (hours and hours) to another external hard drive.
They are now in alphabetical order (all 19,000+ of them) NOT IN THEIR EVENTS or date order. (-They have also been taken with different cameras over the years and some of the generic camera numbering remains.)
I have tried to copy them (only a few as an experiment) one event at a time, but that again "opens up" the Event "folder" and tips them out as individuals and therefore just lists image letters and numbers alphabetically.
How can I copy
the whole library still in "Events" to an external hard drive?
the folders/albums I have already made on to this hard drive?
and how can I add to this back up monthly, again keeping events and folders separate and updated?
Mac is so user friendly - there must be a way.........
Thanks

UPDATE : I have re-installed from disk, various apps that were no longer functioning such as iLife, iWork etc. So, I now can access my photos again.
Also, I had to re-install all the software for my printer ( Stylus Pro 4880 ) and reset it so the printer is working again.
Photoshop CS4 won't open. I think I will have to get in touch with Adobe as basically, I guess they have a built-in "blocker" which prevents me from opening the app as the license is for only 1 user and having re-installed the OS, there are now, in effect, 2 users ( Me and Me 1, I think ).
So, having added on a new external HD, Time Machine has made a copy of most of the files, folders, apps etc onto the external HD. The internal HD is still nearly full ( 220 GBs out of 232 GBs ).
I am guessing the way to go now in order to free up space on the internal HD is to delete/trash older photos from my iPhoto library and hope that if needed, I will be able to access them on the external HD.
Am I correct ? Please advise before I do something I will regret.
Thanks, Sean.

Entry date not proper in adhoc query

Hi,
Entry date field in action infotype ( in the adhoc query) always returns 00.00.0000. Whereas the standard reports brings the entry date properly (This is from prelq.hiredate). How we can bring the values into this particular field.The feature 'ENTRY' returns DATYP but data is not maintained in IT41. System should bring the hiring action date (0000 start date) as the entry date. We want to use this entry date field in the adhoc query.
Thanks in advance.
Sreeja

Hi Sreeja
Please read the following paragraph of the consulting note 508026 :
"Exception:
If the query is started with a key date selection, the query calls
function module HR_LEAVING_DATE with the key date and not with the start
and end date of the personnel action in which the key date exists. You
can use modification note 562031 to change this system response."
Please also make sure, that the corrections of note 561514 are contained in your system.
I hope that this information be useful for you.
Regards,
Jun

Entry date in blank for limited Contract Type

Hello,
I've set up the feature ENTRY with the value EINDT X for my molga, but when I run a hiring action and in infotype 16, in the field Contract Type I use a Limited contract Type, and when I run the report S_AHR_61016362 (Flexible Employee
Data) the Entry Date Column is in blank but it does not happen when I use Unlimited Contract Type.
Does anyone can help me?

Hi,
This feature provides entry date definition method to function module HR_ENTRY_DATE. In your case it reads following fields from IT0016:
1. EINDT "Initial Entry"
2. KONDT "Date of Entry into Group"
First of all check that you entered one of these fields for employees with temporary contract.
Cheers

N81 BUG: date jumps to nearest event entry(date) i...

Similar Messages

Maybe you are looking for