N81 does not retain the correct date...

My N81 got a very strange problem: it does not retain the correct date....
Usually it's wrong by two days ago....!
The S.O. Ver. is: 10.0.32
Thanks you and sorry for my english...! :-)

hi there, have you checked that there is a firmware update for your model? v10 sounds like the original firmware for the N81. i would suggest checking on your PC via Nokia Software Updater for any firmware updates. the latest firmware version for the N81, unbranded or not, is v21.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Similar Messages

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

Issues logging data - does not save the correct data

I am having 2 issues:
1. I am having issues with my logging occuring at the right time.
I have a few things occuring based on the state of 'Injection'. In the case of logging, the following needs to happen:
When injection is 'True' nothing should occur. When injection goes 'False', data logging should occur. If my injections are 'continuous' the boolean goes:
True, False, True, False. I would have 2 logging sessions during both 'False' occurrences. What appears to be happening is that the logging occurs during the 'True' state. I am not sure why.
2. The logging needs to save a certain amount of samples to the text file. If my 'False' state lasts for 1 second, I need to have 1000 samples. If 2seconds, 2000 seconds, if 1.5seconds, 1500 samples..you get the idea. At current I am only getting 100 samples at a time, at dt of .1
Code below:

belopsky wrote:
Thanks Dennis.
i seem to have issues w my UI updating when I specifiy samples to read. It appears to lag, which is OK, as long as the timing is still correct..
Can I acquire continuously, without specifing how many samples, but specify how many samples to read?
DAQmx Read will return the number of samples requested immediatly if they are available otherwise it will wait for the number of samples requested to be avilable and return the number of samples requested. This of course, means that the loop will only iterate no faster than "number of samples * Sample rate". (probably what you mistook for "Lag") IF the number of samples requested is not available before the timeout period DAQmx Read will return with the number of samples available and a timeout in the error cluster so your calling code can handle the exception intelegently. If the number of samples requested is -1 DAQmx Read returns the number of samples available now without waiting at all.
Clear?
Jeff

Facetime not working "the device to register does not have the correct access data"

I can't use my facetime on my macbook anymore. I used it already a lot of times, but now I have to log in with my Apple ID (and password) before I can use it. After this it asks which emailadress I want to use to make and get calls. After choosing this, it states that "the device to register does not have the correct access data". I can also not change anything at the preferences of facetime, as it has become unclickable (probably because I am not logged in). What to do now?

Create another standard user on your MB. I bet facetime will work from there. Unless you have replaced a motherboard and Apple forgot to flash your old serial number into it. Check serial number in About this mac. If it's not there it is your likely problem.
There might be other problems. Have you tried checking with Apple?

TS1702 The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, they post exactly 4 hours earlier than the correct time on my Yahoo Calendar. Does anyone have a "fix" to correct the "time

The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, items post exactly 4 hours earlier than the correct time on my Yahoo Calendar. My i4S is in the correct New York time zone. Help?

I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work. So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.

My wife's iTunes ID will no longer work. Tried to reset password but did not get email, tried to reset by answering personal questions' but will not accept the correct date of birth. Has it been hacked? How can I fix this?

My wife's iTunes used ID will not work. Tried resetting the password, but email was not received. Tried using personal questions method, but would not accept the correct date of birth, so could not go any further. Has her iTunes ID been hacked? How can I fix this?

Thanks for that advice @randers4.
I linked through and submitted my info as a "topic not covered" in the iCloud section. After entering the serial number of my MBP it turns out I wasn't eligible for technical support (though I don't think this is hardware related support) and the final suggestion was to take my computer into an Apple store. I called my local Apple reseller and asked for assistance. The customer service rep was very nice but unable to help, so suggested I call Apple Support on 1300 321 456. I did so and, again, spoke to two very polite and helpful customer service people (I was transferred to security services). I didn't have to be on hold to speak to either rep for more than a few seconds! After trying a few different things, he worked out what was happening...
So, to cut a long story short, to solve the problem in my OP, all I had to do was log out of iCloud in my System Preferences and log back in using my current Apple ID. [Edited to add that I had to sign out of everything I was currently signed in to with my Apple ID before logging out and in again.]
Problem solved!
Message was edited by: NotBaconBits

Certificate does not contain the correct site name

Hello,
I have to make a midlet that connect to a tomcat 5.5.9 server with ssl.
I import the certificate whit tomcat alias in the wireless toolkit but when i run the midlet this error appear: Certificate does not contain the correct site name
import java.io.*;
import javax.microedition.midlet.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
public class HelloNet extends MIDlet implements CommandListener , Runnable{
// User interface command to exit the current
// application.
private Command exitCommand = new Command("Exit",
Command.EXIT, 2);
// User interface command to issue an HTTP GET
// request.
private Command getCommand = new Command("Get",
Command.SCREEN, 1);
/// The current display object.
private Display display;
// The url to GET from the 'net.
private String url;
* Initialize the MIDlet with a handle to the
* current display.
public HelloNet() {
url = "https://127.0.0.1:8443/Hello.txt";
     display = Display.getDisplay(this);
* This lifecycle method should return immediately
* to keep the dispatcher
* from hanging.
public void startApp() {
     showPrompt();
* Display the main screen.
void showPrompt() {
String s = "Press Get to fetch " + url;
TextBox t = new TextBox("Http Result", s,
s.length(), 0);
t.addCommand(exitCommand);
t.addCommand(getCommand);
t.setCommandListener(this);
     display.setCurrent(t);
* pauseApp signals the thread to stop by clearing
* the thread field.
* If stopped incorrectly, it will be restarted from
* scratch later.
public void pauseApp() {
* destroyApp must cleanup everything. The thread
* is signaled
* to stop and no result is produced.
* @param unconditional is a flag to indicate that
* forced shutdown
* is requested
public void destroyApp(boolean unconditional) {
* commandAction responds to commands
* @param c command to perform
* @param s Screen displayable object
public void commandAction(Command c, Displayable s) {
     if (c == exitCommand) {
     destroyApp(false);
     notifyDestroyed();
     } else if (c == getCommand) {
          Thread th= new Thread (this);
          th.start();
* Read the content of the page.
public void run() {
TextBox t = null;
StringBuffer b = new StringBuffer();
HttpsConnection c = null;
InputStream is = null;
     try {
     int len = 0;
     int ch = 0;
     System.out.println("Cerco di leggere");
c = (HttpsConnection)Connector.open(url);
c.setRequestMethod(HttpsConnection.GET);
     is = c.openInputStream();
// length of content to be read.
len = (int) c.getLength();
if (len != -1) {
// Read exactly Content-Length bytes
for(int i=0; i<len; i++) {
if((ch = is.read()) != -1) {
b.append((char) ch);
} else {
// Read until connection is closed.
while((ch = is.read()) != -1) {
len = is.available();
b.append((char) ch);
t = new TextBox("Https Result", b.toString(),
b.length(), 0);
     } catch (Exception e) {
e.printStackTrace();
String s = e.toString();
if(s != null) {
t = new TextBox("Https Error", s, s.length(),
0);
} finally {
if (is != null) {
     try {
          is.close();
     } catch (Exception ce) { }
if (c != null) {
     try {
          c.close();
     } catch (Exception ce) { }
display.setCurrent(t);
}

re: code tags, please see http://forum.java.sun.com/help.jspa?sec=formatting.
As for the rest:
See, we now know that you used keytool to generate you certificate. You need a new certificate. This time, when keytool asks you for a first and last name, type 127.0.0.1.

When converting tables in a MS Word 2010 or 2007 to PDF the table borders do not retain the correct thickness as identified in the word document. Is there a solution for this issue?

When converting tables in a MS Word 2010 or 2007 to PDF the table borders do not retain the correct thickness as identified in the word document. Is there a solution for this issue?

Please try with latest version of MS Word and Acrobat.
Regards,
Anoop

HT4157 I have an iPad 2 and it does not display the cellular data button under settings

I have an iPad 2 and it does not display the cellular data button under settings. It does display a Bluetooth button in its place. I have tried the reset but no luck

Is the iPad the Cellular version? Does it have an active Data plan? Does it have a Sim card installed in inside it?

Is there a save option on iPhoto? Sometimes iPhoto does not retain the name on a face I've added to a photo.

Sometimes iPhoto does not retain the name on a face I've added to a photo. I have 'added a face' then flipped to the next picture then back to that picture and the label has disappeared.

No. It's supposed to be automatic. You might try repairing the library's database and then see if it still crops up now and then. If that doesn't help try rebuilding it the same way.
Launch iPhoto with the Option+Command keys held down and select the database repair option in the rebild window:
Then the rebuild option if necessary.
OT

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

Adobe Acrobat 8 Professional does not accept the correct serial number after reinstallation

Adobe Acrobat 8 Professional does not accept the correct serial number after reinstallation, what to do?

Thank you Bill. You could help me with the answer and the one in the other forum:
"Acrobat has a separate installation process and needs to be activated with your Adobe ID I think. The question on CC is really one for the folks in the CC forum (Adobe Creative Cloud), not the Acrobat forum".
I could resolve things with Adobe CC. I don´t need my old Acrobat 8, but I could finally install Acrobat XI Pro - and this time it seems to work, without permanently crashing down.
Thank you.

Adobe Acrobat 8 Professionals does not accept the correct serial number after reinstallation

Adobe Acrobat 8 Professionals does not accept the correct serial number after reinstallation, what to do?

Moved to Acrobat Installation & Update Issues

Transport certificate does not have the correct issuer or is expired

Hi all,
I hope this is not a duplicate question.
We are assisting a partner company set up the Flash Access ecosystem. They have asked us to help packaged some content for them using certificates issued to them. I've been trying to package content that works fine when using our certificates but I keep getting this error : Transport certificate does not have the correct issuer or is expire when I try to package with their certificates.
The certificate has not expired. That was the first thing I checked.
Has anyone run into this error? I am using the reference implementation for packaging if that helps.
Thanks.
Pedro.

Hi Katherine,
Thanks for responding.
Indeed I do have the adobe-flashaccess-certs.jar in my path. I was able to package with a certificate issued to our own company. Our Certificates were Trial Certificates. The ones I am having problems with are test PKI certificates that our partner sent to us so that we can help them out.
Please let me know if you need any more info. I am definitely down with helping someone trying to help me!
Thanks.
Pedro.

Build does not contain the correct beta entitlement???

Hello everyone,
Should I be concern about this warning message? Thanks.
"Build 32.0.1.17.99204 does not contain the correct beta entitlement"

Hi i have the same issue, I created a new provisioning file but still i have the same issue.
I have created new certificate, p12, provisioning file, using openssl,windows os, flashbuilder 4.6 but nothing happened.
I suspect i should also create new AppID(i have used my existing appid).
Please help me in solving the issue.

N81 does not retain the correct date...

Similar Messages

Maybe you are looking for