N81 How to Show calender at active standby

Hi, i just bought a N81, but i just cant seem to get the phone to show the calender details for the day at the active standby mode(the main page). I can do it previously on my 6280.
Anyone can help?

12-Jun-2008 11:42 AM
psychomania wrote:
Pass, it reads to me like they want to change the active standby shortcuts and can't find which application to use in the phone.
It reads like that to me too.
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

Similar Messages

  • Help: how to change shortcuts in active standby mo...

    i want to replace some of the shortcuts by others at active standby mode on N82.
    does anybody know the solution since i can not find the API to do that.
    thanks,

    12-Jun-2008 11:42 AM
    psychomania wrote:
    Pass, it reads to me like they want to change the active standby shortcuts and can't find which application to use in the phone.
    It reads like that to me too.
    Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
    If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

  • How to show calender in a concurrent program report parameter form?

    I have a report that passess 2 parameters
    1)From Date
    2)To Date
    I registered the report as a concurrent program in Oracle EBS.
    Now everythig works fine and report is showing
    But i want in place of from date and to date, a calender.How can it be possible in Apps
    Please give me information as quickly as possible
    Thanks in advance
    Manoj-M

    Hi,
    Not possible that I'm aware of.
    Regards,
    Gareth
    Blog: http://garethroberts.blogspot.com/

  • Adobe Muse: How to show Submenu on active sub sites

    Hey there,
    I was just wondering:
    Is it possible to show the submenu of the concerning page in Adobe Muse if you are on a Subpage.
    E.g if I had the mainpages Home, About and Contact. About has two subpages in a submenu.
    What I want to do is if you are on one subpage of "About", the submenu of the About menu item is shown with the subpage marked as active.
    Thanks for you help!

    Hi
    Please refer to these threads :
    https://forums.adobe.com/message/4771592#4771592
    https://forums.adobe.com/message/6148234#6148234
    Thanks,
    Sanjit

  • How to tell if Active/active or Active/Standby mode is configured?

    Folks:
    I am still learning the output of my running config, but how do I tell if my firewall is set to Actve/Active or Active/Standby mode?
    In addition, how do I tell if it uses regular or stateful failover mode?
    Thank you

    I wanted to provide this as well, since I found it and it also helped me answering my question.
    This output shows Active/Active failover output.
    **Note** it says PIX; however, I beleive it will be the same output for ASA.
    PIX1(config-subif)#show failover
    Failover On
    Cable status: N/A - LAN-based failover enabled
    Failover unit Primary
    Failover LAN Interface: LANFailover Ethernet3 (up)
    Unit Poll frequency 15 seconds, holdtime 45 seconds
    Interface Poll frequency 5 seconds, holdtime 25 seconds
    Interface Policy 1
    Monitored Interfaces 4 of 250 maximum
    Version: Ours 7.2(2), Mate 7.2(2)
    Group 1 last failover at: 06:12:45 UTC Apr 16 2007
    Group 2 last failover at: 06:12:43 UTC Apr 16 2007
      This host:    Primary
      Group 1       State:          Active
                    Active time:    359610 (sec)
      Group 2       State:          Standby Ready
                    Active time:    3165 (sec)
                      context1 Interface inside (192.168.1.1): Normal
                      context1 Interface outside (172.16.1.1): Normal
                      context2 Interface inside (192.168.2.2): Normal
                      context2 Interface outside (172.16.2.2): Normal
      Other host:   Secondary
      Group 1       State:          Standby Ready
                    Active time:    0 (sec)
      Group 2       State:          Active
                    Active time:    3900 (sec)
                      context1 Interface inside (192.168.1.2): Normal
                      context1 Interface outside (172.16.1.2): Normal
                      context2 Interface inside (192.168.2.1): Normal
                      context2 Interface outside (172.16.2.1): Normal

  • How do I limit the number of emails that show in my active mailbox?  There was a way in Settings on ios 6, but i can't find it in ios 7.

    How do I limit the number of emails that show in my active mailbox?  There was a way in Settings on ios 6, but i can't find it in ios 7.

    You need to delete your current hotmail account set up on your iphone.
    Once this has done click 'Add Account' and select the new 'outlook.com' tab.
    Set up your hotmail account again from scratch and this will then allow you to select how many weeks/months of emails you sync to your phone.
    Im not sure if anyone else had a similar problem to me prior to iOS 7, but if i deleted an email from my hotmail account on my iphone - it wouldnt sync with my actual hotmail account. So when i logged in online all the emails I had deleted on my phone would still be showing as unread.
    But by setting the account up as above, they now sync perfectly.
    Well for me anyway

  • How to show active page in Spry Menu Bar using images

    Hi,
    I have already read this answer "how to show active page in spry menu bar" but I am using images, not text.  I have mouse-over and mouse-out working in the Spry Menu Bar using image.png and image-over.png, but I cant' figure out how to get the image-over.png to appear on the active page since the spry menu bar is locked on the individual pages.  (I tried to put it in an editable comment, but spry wouldn't go for it. :-)
    Any ideas.  Here is the code:
    <ul id="MenuBar1" class="MenuBarHorizontal">
           <li><a href="../index.html" id="home" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image8','','../images/all_pages/home-over.png',1 )"><img src="../images/all_pages/home.png" alt="Home Page" name="home" width="58" height="20" border="0" id="Image8" /></a></li>
           <li><a href="../show.html" id="show" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('show','','../images/all_pages/show-over.png',1)"><img src="../images/all_pages/show.png" alt="The Show" name="show" width="101" height="20" border="0" id="show" /></a></li>
            <li><a href="../team.html" id="team" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('team','','../images/all_pages/team-over.png',1)"><img src="../images/all_pages/team.png" alt="The Team" name="team" width="97" height="20" border="0" id="team" /></a></li>
            <li><a href="../company.html" id="company" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('company','','../images/all_pages/company-over.png',1)"><img src="../images/all_pages/company.png" alt="The Company" name="company" width="139" height="25" border="0" id="company" /></a></li>
            <li><a href="../beatles-tickets.html" id="tickets" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('tickets','','../images/all_pages/tickets-over.png',1)"><img src="../images/all_pages/tickets.png" alt="Tickets" name="tickets" width="75" height="20" border="0" id="tickets" /></a></li>
            <li><a href="../media.html" id="media" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('media','','../images/all_pages/media-over.png',1)"><img src="../images/all_pages/media.png" alt="Media" name="media" width="61" height="20" border="0" id="media" /></a></li>
            <li><a href="../news-reviews.html" id="news" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('news_reviews','','../images/all_pages/news_reviews-over.png',1 )"><img src="../images/all_pages/news_reviews.png" alt="News-Reviews" name="news_reviews" width="149" height="20" border="0" id="news_reviews" /></a></li>
            <li class="MenuBarHorizontal"><a href="../contact.html" id="contact" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('contact','','../images/all_pages/contact-over.png',1)"><img src="../images/all_pages/contact.png" alt="Contact Us" name="contact" width="79" height="20" border="0" id="contact" /></a></li>
         </ul>
    Thanks so much for helping!
    Cheers,
    Janell

    Just found this page:
    Persistent Page Indicator
    Update: Drat, it is for text menus only not using images. :-(
    Cheers,
    Susan

  • E51: How set active standby inbox to Gmail/All Mai...

    I have a few problems setting up the active standby inbox to point to my gmail account's "All mail" folder.
    First of all, it's not possible to unsubscribe to the Gmail inbox under Folder Subscriptions. This is a minor problem though as I don't use the Gmail inbox, but route all my emails to All Mail through a forwarding system.
    So I'd like my active standby inbox to reflect the All Mail folder.
    Selecting "gmail" under Email Settings/Default mailbox allows me to choose between "Inbox" and "[Google Mail]".
    But, unlike in Email Settings/gmail/Retrieval Settings/Folder Subscriptions, I cannot go one step further and choose "All Mail".
    This means that while my active standby inbox will show "gmail [Google Mail]" it won't show the new message(s).
    Anyway around this? Well, apart from filtering all my emails to my inbox.

    hello Graham
    I guess you have disabled the active standby in-box plugin. Check it under "menu>tools>settings>phone>standby mode>active standby plug-ins", maybe you disabled it. Then under the same menu (standby mode) should be a new entry "active standby mailbox" where you have to select "inbox" for it to display those 2 latest sms in the active standby screen.
    (the menu options may not be exactly as I mentioned, as I'm using portuguese UI)
    Hope it helps
    CheersMessage Edited by skanker on 08-Dec-200701:49 AM

  • E71-1 - No inbox/notification in active standby

    In the past days I have tried to configure any kind of information about my primary email account for the active standby/home screen. The email account works fine (imap-idle account), receiving emails works fine, but other than the @-symbol in the top-right corner (when new emails are available) no information about the inbox or any indication about new emails are displayed on the home screen.
    In the mode-config I selected the email account to be displayed on the home screen, and no matter what option I choose in the email notification 1 details (headers only, headers with popup, headers with unread etc.) nothing at all is shown. I have seen screen shots where at least a bubble notification is shown (for new emails) and also at least a link with the account name. The way it is now I have a really hard time keeping track of my (new) emails, because I really have to open my inbox every time to be sure.
    I have tried every imaginable configuration detail, the manual is no help at all, and I didn't find any information in any forums about this problem. Is this a software bug? Has anybody experienced this? Is there a solution?

    I've been experiencing the same issue where that active standby plugin wouldnt show a notification. But I *THINK* I have it figured out from the clues in this discussion. This post is to benefit any other people googling for the solution. To my knowledge, this method will enable you to have the single line email notication on your Active Standby aka homescreen (where your calendar and meetings show up) in the format of Gmail (6). I believe the catch is you need to have less than 999 emails in your inbox. As a workaround you need to archive all extra emails in your Gmail inbox. A disclaimer: I am not 100% on this, so I will give you as much detail to replicate my scenario where it works, so adjust it for your own situation
    I went through various deletes of my Gmail account in the Email settings area of the NATIVE messaging app (where text messages are).
    If you look at Messaging --> Options --> Settings --> Other
    There is a setting called "Number of saved msgs." I figured out the maximum of this to be 999. In my opinion this setting is talked about saved SENT messages (the setting above it is called "Save sent messages" Yes/No). Set this number to 999.
    I assumed this 999 number of messages to be the limit for all emails out of a hunch. I went into my Gmail account on the web and pretty much archived a lot of emails except the recent ones. Archiving your emails does not delete them, but rather stores them outside of the inbox and are still searchable within Gmail. I made sure the number of emails in my inbox were under 900.
    Next, I followed the steps we all know to put in a Gmail account via IMAP via the setup email wizard and some minor tweaking in the settings dialogs (Messaging --> Options --> Settings --> Email --> Gmail --> Connections Settings --> Both Incoming e-mail and Outgoing e-mail sections) using the guide: Symbian S60 - Gmail Help
    It might also be worth it to set your "Access point in use" for both incoming and outgoing servers.
    Under
    Messaging --> Options --> Settings --> Email --> Gmail --> User Settings --> New e-mail alerts should be ON
    Under
    Messaging --> Options --> Settings --> Email --> Gmail --> Retrieval Settings --> there are no necessary changes (the next section will override settings related to retrieval amount and cause ALL emails to be retrieved.). Note that putting folder subscriptions may put you over the 999 limit. I don't know if the 999 limit applies to each folder or to ALL emails as a whole. If you do put folder subscriptions, the next section setting will automatically also override the # of emails from folders retrieved to be ALL as well. Experiment at your own risk.
    Under
    Messaging --> Options --> Settings --> Email --> Gmail --> Automatic Retrieval:
    Email notifications -- Disabled (you can only have one or the other and email retrieval is more important than this unknown and ill defined setting)
    Email retrieval -- Enabled or "only in home network" (more options will appear now regarding scheduling. Pick your frequency according to how long you want your battery to last and how important your emails are). If you choose "only in home network" I am inclined to believe that it will only use the access point you described earlier in "Connection Settings"
    Out of this menu,
    Under
    Messaging --> Options --> Settings --> Email
    Make sure your default mailbox is Gmail
    If you go into Modes (Modes--> Home screen apps --> Enabled apps) at this point and try to put the "Email 1 notification" as active, and go into "Email 1 notification's " settings, and try to set your mailbox to Gmail, it will tell you to connect first. So lets do that and hope it works
    So go to Messaging --> Gmail --> Options --> Connect and watch it retrieve headers of your emails from Gmail. Make sure that theres 1 or 2 *NEW* emails before downloading for testing out the Active Standby plugin's temperment.
    Go into Modes while it is retrieving the headers of your emails
    Modes --> Home screen apps --> Enabled Apps --> and select "Email 1 notification"
    Go back into
    Modes --> Home screen apps --> Go into the new  "Email 1 Notification" setting there
    Mailbox: Gmail
    Preview: You have a choice of three
    Header only -- shows your mailbox's name and # of unread mails on homescreen -- eg: Gmail (3)
    Header and popup -- show the header described above in 1 line, plus when you hover over it, a preview of your emails in a bubble that includes Sender, Subject, and Date. To me, this is the most useful
    Header and unread -- Shows the header described above in 1 line, and in a 2nd line shows the most recent unread email's Sender, subject, and date
    Assuming you've put a audio tone for email alerts in Profiles --> Whichever profile --> Customize --> Email alert tone
    Then once you head back to your home screen and once the email retrieval finishes, you should hear a audio sound, and see Gmail (3).
    Good luck

  • Active Standby Pair Clustering.

    Hi Chris, I had created ActiveStandby Pair as follows:
    Server 1 => DSN: TTCluster1
    Server 2 => DSN: TTCluster2.
    Then I created ActiveStandby Pair in Server1, Started RepAgent and then Duplicated the DSN on Server 2 with name TTCluster 2. It worked fine.
    Now to access it from the client server mode, I created Client DSN on Client machine using Virtual IP. (Using Linux Cluster Manager).
    But inthis case I had to create two client DSN. TTCluster1Client and TTCluster2client. Since Application can connect to only one DSN and shifting to other while failover is very difficult.
    So I am trying following model now, Let me know your views on this.
    Server 1 and Server 2, both will have same DSN name "TTCluster".
    Client Machin will have only one DSN "TTClusterClient" using VIP.
    When the Server1 failes, Server 2 will take over and there is no need of shifting client DSN. Application will be routed to Server 2 after switch over.
    Step1: created server DSN "TTCluster" on Server 1 and Server 2.
    Step2: created user 'ttcluster' on Server 1 and Server 2.
    Step3: Create DataStore TTCluster on Server 1. (By connecting to TTCluster).
    Step4: Create Cache Groups (AWT) on Server1.
    Step5: Started Cache Agent on Server1.
    Step6: Created ActiveStandby Pair on Server1 as follows:
    CREATE ACTIVE STANDBY PAIR
    TTCluster ON "wabtectimesten.patni.com",
    TTCluster ON "wabtectimesten2.patni.com"
    RETURN TWOSAFE
    STORE TTCluster PORT 20000 TIMEOUT 120;
    Step8: executed ttrepstateset('ACTIVE') on server1.
    Step9: Started Replication Agent on Server1.
    Step10: Duplicated DataStore on Server2.
    Issues:
    Server2 is not coming up as Standby. The log on Server1 shows following messages:
    15:19:33.83 Warn: REP: 8671: TTCLUSTER:receiver.c(1723): TT16060: Failed to read data from the network. select() timed out
    15:19:37.09 Err : REP: 8671: TTCLUSTER:receiver.c(3428): TT16142: Failed to retrieve peer information. No peers found
    15:19:37.09 Err : REP: 8671: TTCLUSTER:transmitter.c(5523): TT16229: Transmitter thread failure due to lack of state consistency at subscriber store _ORACLE
    Question:
    While creating replication scheme I have mentioned.
    STORE TTCluster PORT 20000 TIMEOUT 120;
    I need to define the timeout for both DataStores. How will I do that?
    The above timeout will be applicable for which datastore??
    Can you please let me know if I am going in the right direction???

    Hi Tanweer,
    When designing a monitoring scheme for TimesTen one has to bear a few things in mind (though not all will be relevant in every case):
    1. There could be multiple 'instances' of TimesTen installed on a machine. Each instance is completely independent and must be monitoried separately.
    2. Each instance has a 'main daemon' (timestend) that is the instance master supervisor. If this daemon is running and healthy then the 'instance' is considered to be 'up' and 'healthy'.
    3. Each instance can manage multiple datastores. Each datastore is independent from the others and so each datastore must be monitored separately.
    4. Each datastore may be using replication and/or cache connect. If so, these must also be monitored as well as the datastore since it is perfectly possible e.g. for the datastore to be healthy but for replication to be 'down'.
    Depending on your requirements, your monitoring mechanism must 'model' this structure and relationships...
    - If the instance main daemon is not running, or is not responding, then the entire instance is 'down' and all datastores managed by the instance should also be considered as 'down'
    - If a datastore goes down (e.g. call invalidate), other stores in the instance are not affected and neither is the main daemon for the instance. They will continue to operate normally.
    - A datastore may be healthy in itself but maybe replication or cache connect for the datastore is not healthy. Do you then consider the datastore as down? That depends on your applications requirements!
    Hopefully this helps to clarify the interrelationship of components. Crashing a datastore by calling 'invalidate' does not crash the daemon (if it does then that is a bug!).
    For monitoring the instance (main daemon) there are a few options:
    1. ps -ef | grep timestend. This can detect if the daemon process is running but not if it is healthy...
    2. Connect to a datastore. Every connect/disconnect request is processed via the main daemon so if the daemon is not healthy this will result in some error (usually a 'cannot communicate with the daemon' error). However, connect/disconnect are relatively expensive so you don't want to do this too often.
    3. Have a monitoring process that maintains an open connection to the instance level datastore (DSN=TT_<instancename>). Periodically (as often as required within reason) it can execute the built in procedure ttDataStoreStatus() passing it the pathname of the instaance datastore checkpoint files (obtainable from the built in procedure ttConfiguration). This procedure communicates with the main daemon so will either return success (meaning daemon is okay) or an error (daemon is in big trouble).
    If you have to do the test from a script then I would suggest that (2) is best but if you can do it from a continually running monitoring process then (3) is better.
    For monitoring a datastore the best way to ascertain overall health is as follows:
    1. Have a dummy table in the datastore. And as part of the check update a row in th dummy and commit the transaction. If this returns success then this shows that the datastore is up and able to service update requests (which means it is also okay for read requests).
    2. You should also monitor the available space in the datastore and warn someone or something if the free space gets too low. You can query space allocation, current usage and high watermark usage from the SYS.MONITOR table. You can also configure TimesTen to generate SNMP traps and/or return warnings to applications if space usage exceeds some configured threshold. The objective is to take proactive action to prevent the datastore becoming full since that will require more disruptive corrective action.
    For monitoring replication you should periodically:
    1. Check that the datastore's repagent is running (you can do this using ttDatastoreStatus)
    2. Check the status of each replication peer by calling ttReplicationStatus and checking the values of pstate (should be 'start') logs (if this value increases over time then the peer is in some kind of trouble) and lastMsg (if there is no message from the peer for a long time then it may be in some kind of trouble).
    3. Sometimes an easier way is to have a dummy table set up for synchronous replication and do an update+commit for a row in that table. if replicatioin is working the commit will return within a few ms at most. If you get a timeout error returned that tells you that replication is in trouble,
    To monitor cache connect is not so easy at present.
    For AWT cache groups, the same monitoring as is used for replication is okay).
    For SWT cache groups, if the sync to Oracle is not working every commit will get an error (so that's kind of obvious).
    For AUTOREFRESH cache groups it's a bit harder. There is currenyly no supported way to determine when the last successful autorefresh occurred. I am hoping this capability will be added in a future release.
    Sorry if that is a bit long winded - I hope it helps...
    Chris

  • Search for other "active standby"

    i have N95 8GB phone
    this is my six nokia phone and i loved them all
    this symbain OS have something that really annoying me
    * the "active standby" has no Editing option except the changing of the shortcuts (that i never used anyway)
    i mean that i cant change the location and the content of the window of the active standby. (like on Nokia6233) (S40 OS)
    * all the previous nokia phone that i have, the "active standby" was activated by the up arrow key, - and now in that symbian it used all the 4 direction key to activated. - i used to use the other 3 for messaging, or looking the diary.
    * i usually used the active standby to indicate what calender schedule i have to do, and in that OS it show only appointment, and don't show normal task scheduling.
    if someone can help me set this settings over the phone OR
    suggest me another application (3rd party) like the "active standby"
    but with an option of editing the setting of the content???

    Yes, there are a bunch of people out there...
    I guess nobody replied, because there is no way to change the active standby in S60 models and there is no 3rd party application to replace it.
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • Standby remains "IDLE" after creating Active-Standby pair

    hi gurus
    After creating an active stand by pair,the standby node can not step in "standby" role.
    On the standby:
    Command> call ttrepstateget;
    +< IDLE >+
    +1 row found.+
    On the active:
    Command> call ttrepstateget;
    +< ACTIVE >+
    +1 row found.+
    ttrepadmin -showstatus command on the active shows:
    tt01@njzapp1:/oracle/app/tt01/TimesTen/tt01/info$ttrepadmin -showstatus ocs01
    Replication Agent Status as of: 2010-04-21 09:24:48
    DSN                         : ocs01
    Process ID                  : 225840 (Started)
    Replication Agent Policy    : manual
    Host                        : NJZAPP1
    RepListener Port            : 17015
    Last write LSN              : 0.9662520
    Last LSN forced to disk     : 0.9662520
    Replication hold LSN        : 0.9583928
    Replication Peers:
    Name                     : OCS01
    Host                     : PJZAPP1
    Port                     : 18011  (Connected)
    Replication State        : STARTED
    Communication Protocol   : 24
    TRANSMITTER thread(s):
    For                     : OCS01
    Start/Restart count   : 97
    Send LSN              : 0.9583928
    Transactions sent     : 0
    Total packets sent    : 97
    Tick packets sent     : 0
    MIN sent packet size  : 139
    MAX sent packet size  : 139
    AVG sent packet size  : 139
    Last packet sent at   : 09:24:31
    Total Packets received: 0
    Most recent errors (max 5):
    TT16060 in transmitter.c (line 6605) at 08:44:16 on 04-21-2010
    TT16060 in transmitter.c (line 6605) at 08:54:19 on 04-21-2010
    TT16060 in transmitter.c (line 6605) at 09:04:22 on 04-21-2010
    TT16060 in transmitter.c (line 6605) at 09:14:25 on 04-21-2010
    TT16060 in transmitter.c (line 6605) at 09:24:28 on 04-21-2010
    RECEIVER thread(s):
    For                     : OCS01
    Start/Restart count   : 1
    Transactions received : 0
    Total packets sent    : 1
    Tick packets sent     : 0
    MIN sent packet size  : 80
    MAX sent packet size  : 80
    AVG sent packet size  : 80
    Last packet sent at   : 09:24:45
    Total Packets received: 1
    MIN rcvd packet size  : 139
    MAX rcvd packet size  : 139
    AVG rcvd packet size  : 139
    Last packet rcvd'd at : 09:24:45
    Most recent errors (max 5):
    TT16060 in receiver.c (line 2044) at 09:24:45 on 04-21-2010
    ttrepadmin -showstatus command on the standby shows:
    ttrepadmin -showstatus ocs01
    Replication Agent Status as of: 2010-04-21 09:38:25
    DSN                         : ocs01
    Process ID                  : 184590 (Started)
    Replication Agent Policy    : manual
    WARNING: Replication Agent has not finished initialization yet.
    And ttdaemonlog -r shows lots of this message:
    +2010-04-21 09:25:49.43 Warn: REP: 225840: OCS01:receiver.c(2044): TT16060: Failed to read data from the network. select() timed out+
    How to handle this problem?
    Thank you very much.
    Edited by: KevinMao on Apr 20, 2010 6:39 PM

    Hi Kevin
    the obvious culprits: did you create the standby with the 'duplicate' command? Did you start the replication agents for both active and standby?
    Can you share the 'create active standby ...' command you used and the steps you followed to set this up?
    Adam

  • Nokia 5310 active standby: number of appointments ...

    Hi to everybody,
    This is my first discussion here. I have one Nokia 5310 and I'd like to see all the list of appointments in the active standby, but I can see only two. Is it possible to show all my appointments for one date? If yes, how can I do it?
    Thanks a lot

    NSU says that there isn't an update (currently 4.52) for my phone.
    In the mean time I've found out that I have an "Orange" version. All these versions suffer from the same problem.
    Is there a way to install a generic 6233 firmware on my handset?
    Karel

  • How to import your MS Active Directory users in an Oracle table

    Hello,
    I first tried to get a Heterogenous Connection to my MS Active Directory to get information on my Active Directory users.
    This doesn't work so I used an alternative solution:
    How to import your MS Active Directory users in an Oracle table
    - a Visual Basic script for export from Active Directory
    - a table in my database
    - a SQL*Loader Control-file
    - a command-file to start the SQL*Loader
    Now I can schedule the vsb-script and the command-file to get my information in an Oracle table. This works fine for me.
    Just to share my scripts:
    I made a Visual Basic script to make an export from my Active Directory to a CSV-file.
    'Export_ActiveDir_users.vbs                              26-10-2006
    'Script to export info from MS Active Directory to a CSV-file
    '     Accountname, employeeid, Name, Function, Department etc.
    '       Richard de Boer - Wetterskip Fryslan, the Nethterlands
    '     samaccountname          Logon Name / Account     
    '     employeeid          Employee ID
    '     name               name     
    '     displayname          Display Name / Full Name     
    '     sn               Last Name     
    '     description          Description / Function
    '     department          Department / Organisation     
    '     physicaldeliveryofficename Office Location     Wetterskip Fryslan
    '     streetaddress          Street Address          Harlingerstraatweg 113
    '     l               City / Location          Leeuwarden
    '     mail               E-mail adress     
    '     wwwhomepage          Web Page Address
    '     distinguishedName     Full unique name with cn, ou's, dc's
    'Global variables
        Dim oContainer
        Dim OutPutFile
        Dim FileSystem
    'Initialize global variables
        Set FileSystem = WScript.CreateObject("Scripting.FileSystemObject")
        Set OutPutFile = FileSystem.CreateTextFile("ActiveDir_users.csv", True)
        Set oContainer=GetObject("LDAP://OU=WFgebruikers,DC=Wetterskip,DC=Fryslan,DC=Local")
    'Enumerate Container
        EnumerateUsers oContainer
    'Clean up
        OutPutFile.Close
        Set FileSystem = Nothing
        Set oContainer = Nothing
        WScript.Echo "Finished"
        WScript.Quit(0)
    Sub EnumerateUsers(oCont)
        Dim oUser
        For Each oUser In oCont
            Select Case LCase(oUser.Class)
                   Case "user"
                        If Not IsEmpty(oUser.distinguishedName) Then
                            OutPutFile.WriteLine _
                   oUser.samaccountname      & ";" & _
                   oUser.employeeid     & ";" & _
                   oUser.Get ("name")      & ";" & _
                   oUser.displayname      & ";" & _
                   oUser.sn           & ";" & _
                   oUser.description      & ";" & _
                   oUser.department      & ";" & _
                   oUser.physicaldeliveryofficename & ";" & _
                   oUser.streetaddress      & ";" & _
                   oUser.l           & ";" & _
                   oUser.mail           & ";" & _
                   oUser.wwwhomepage      & ";" & _
                   oUser.distinguishedName     & ";"
                        End If
                   Case "organizationalunit", "container"
                        EnumerateUsers oUser
            End Select
        Next
    End SubThis give's output like this:
    rdeboer;2988;Richard de Boer;Richard de Boer;de Boer;Database Administrator;Informatie- en Communicatie Technologie;;Harlingerstraatweg 113;Leeuwarden;[email protected];;CN=Richard de Boer,OU=Informatie- en Communicatie Technologie,OU=Afdelingen,OU=WFGebruikers,DC=wetterskip,DC=fryslan,DC=local;
    tbronkhorst;201;Tjitske Bronkhorst;Tjitske Bronkhorst;Bronkhorst;Configuratiebeheerder;Informatie- en Communicatie Technologie;;Harlingerstraatweg 113;Leeuwarden;[email protected];;CN=Tjitske Bronkhorst,OU=Informatie- en Communicatie Technologie,OU=Afdelingen,OU=WFGebruikers,DC=wetterskip,DC=fryslan,DC=local;I made a table in my Oracle database:
    CREATE TABLE     PG4WF.ACTD_USERS     
         samaccountname          VARCHAR2(64)
    ,     employeeid          VARCHAR2(16)
    ,     name               VARCHAR2(64)
    ,     displayname          VARCHAR2(64)
    ,     sn               VARCHAR2(64)
    ,     description          VARCHAR2(100)
    ,     department          VARCHAR2(64)
    ,     physicaldeliveryofficename     VARCHAR2(64)
    ,     streetaddress          VARCHAR2(128)
    ,     l               VARCHAR2(64)
    ,     mail               VARCHAR2(100)
    ,     wwwhomepage          VARCHAR2(128)
    ,     distinguishedName     VARCHAR2(256)
    )I made SQL*Loader Control-file:
    LOAD DATA
    INFILE           'ActiveDir_users.csv'
    BADFILE      'ActiveDir_users.bad'
    DISCARDFILE      'ActiveDir_users.dsc'
    TRUNCATE
    INTO TABLE PG4WF.ACTD_USERS
    FIELDS TERMINATED BY ';'
    (     samaccountname
    ,     employeeid
    ,     name
    ,     displayname
    ,     sn
    ,     description
    ,     department
    ,     physicaldeliveryofficename
    ,     streetaddress
    ,     l
    ,     mail
    ,     wwwhomepage
    ,     distinguishedName
    )I made a cmd-file to start SQL*Loader
    : Import the Active Directory users in Oracle by SQL*Loader
    D:\Oracle\ora92\bin\sqlldr userid=pg4wf/<password>@<database> control=sqlldr_ActiveDir_users.ctl log=sqlldr_ActiveDir_users.logI used this for a good list of active directory fields:
    http://www.kouti.com/tables/userattributes.htm
    Greetings,
    Richard de Boer

    I have a table with about 50,000 records in my Oracle database and there is a date column which shows the date that each record get inserted to the table, for example 04-Aug-13.
    Is there any way that I can find out what time each record has been inserted?
    For example: 04-Aug-13 4:20:00 PM. (For my existing records not future ones)
    First you need to clarify what you mean by 'the date that each record get inserted'.  A row is not permanent and visible to other sessions until it has been COMMITTED and that commit may happen seconds, minutes, hours or even days AFTER a user actually creates the row and puts a date in your 'date column'.
    Second - your date column, and ALL date columns, includes a time component. So just query your date column for the time.
    The only way that time value will be incorrect is if you did something silly like TRUNC(myDate) when you inserted the value. That would use a time component of 00:00:00 and destroy the actual time.

  • ASA 5520 VPN load balancing with Active/Standby failover on 2 devices only...

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    This topic has been beat to death, but I did not see a real answer. Here is configuration:
    1) 2 x ASA 5520, running 8.2
    2) Both ASA are in same outside and inside interface broadcast domains – common Ethernet on interfaces
    3) Both ASA are running single context but are active/standby failovers of each other. There are no more ASA’s in the equation. Just these 2. NOTE: this is not a Active/Active failover configuration. This is simply a 1-context active/standby configuration.
    4) I want to share VPN load among two devices and retain active/standby failover functionality. Can I use VPN load balancing feature?
    This sounds trivial, but I cannot find a clear answer (without testing this); and many people are confusing the issue. Here are some examples of confusion. These do not apply to my scenario.
    Active/Active failover is understood to mean only two ASA running multi-contexts. Context 1 is active on ASA1 Context 2 is active on ASA2. They are sharing failover information. Active/Active does not mean two independently configured ASA devices, which do not share failover communication, but do VPN load balancing. It is clear that this latter scenario will work and that both ASA are active, but they are not in the Active/Active configuration definition. Some people are calling VPN load balancing on two unique ASA’s “active/active”, but it is not
    The other confusing thing I have seen is that VPN config guide for VPN load balancing mentions configuring separate IP address pools on the VPN devices, so that clients on ASA1 do not have IP address overlap with clients on ASA2. When you configure ip address pool on active ASA1, this gets replicated to standby ASA2. In other words, you cannot have two unique IP address pools on a ASA Active/Standby cluster. I guess I could draw addresses from external DHCP server, and then do some kind of routing. Perhaps this will work?
    In any case, any experts out there that can answer question? TIA!

    Wow, some good info posted here (both questions and some answers). I'm in a similar situation with a couple of vpn load-balanced pairs... my goal was to get active-standby failover up and running in each pair- then I ran into this thread and saw the first post about the unique IP addr pools (and obviously we can't have unique pools in an active-standby failover rig where the complete config is replicated). So it would seem that these two features are indeed mutually exclusive. Real nice initial post to call this out.
    Now I'm wondering if the ASA could actually handle a single addr pool in an active-standby fo rig- *if* the code supported the exchange of addr pool status between the fo members (so they each would know what addrs have been farmed out from this single pool)? Can I get some feedback from folks on this? If this is viable, then I suppose we could submit a feature request to Cisco... not that this would necessarily be supported anytime soon, but it might be worth a try. And I'm also assuming we might need a vip on the inside int as well (not just on the outside), to properly flip the traffic on both sides if the failover occurs (note we're not currently doing this).
    Finally, if a member fails in a std load-balanced vpn pair (w/o fo disabled), the remaining member must take over traffic hitting the vip addr (full time)... can someone tell me how this works? And when this pair is working normally (with both members up), do the two systems coordinate who owns the vip at any time to load-balance the traffic? Is this basically how their load-balancing scheme works?
    Anyway, pretty cool thread... would really appreciate it if folks could give some feedback on some of the above.
    Thanks much,
    Mike

Maybe you are looking for

  • How to integrate different database in SAP B1 into unique DB?

    Hello, In our landscape, we've SAP B1 System and we also build SAP BW on Hana reports using B1 as a source system. Currently, in SAP B1 system, we don't have unique database.  Rather, we have distinct database for different Sales Offices.  At present

  • Computer wont recognize Zen Micro...HE

    I got my Zen Micro on 9/2/05..and im already having problems with it. When i first started using it the day that i got it it was working fine. After about 2 days it started freezing. Then yesterday my computer wouldnt recognize it. The confusing thin

  • HOW DO I CREATE A PLAIN IMAGE ON A PANEL

    I want to create a simple image with text on it it and display it on a JPanel. Does anybody know how to do this? Thanks in Advance Colin

  • MS SQL Table Editor for OSX

    Would anyone know a inexpensive or free ms sql table editor out there for OS 10.4.11? I tried Aqua Datas Studio eval and it works great but is $400.00 and is a complete sql program. All I need is the table editor function. they have many on the pc bu

  • I have photo's in a folder but elements doesn't see them.

    I have tried to import the folder's files but no luck, still doesn't see them.  I have tried to; Show hidden files, Reconnect, All Missing files, Untagged Items, all with no luck.  Any Ideas