N81 turns on but nothing happens... blank screen

Hello ppl.
My mom was on vacation and brought me a Nokia N81 and i just thought Oh gosh cool! But... just a days from having it, it won't show anything on the screen. Its the second time but the first time i just turned the device off and problem resolved. Now days after that I used the cellphone for alarm, downloaded OVI store and created a N-gage acc. Just got back from school and the cellphone has blank screen, I hard restart it but anything. It just turns on and it doesn't show anything more and makes a *beep*.
Really guys I need some help here because its just new and it would be a waste :/

Oh god... warranty. Are you kidding me? From China to Panama... How am I suppose to use my warranty from Panama. This complicates things more. And yes, I have tried turning on the phone without and with SIM and I haven't figure out where is the memory card. Maybe an electronic shop could fix it?

Similar Messages

Macbook turns on, but nothing on the screen

I had my macbook pro last september for my birthday, and until last night it had been working properly. but just tonight it won't start up! when i held the power button, the screen stays black although there is this normal sound when mbp's starting. I blind my way and click randomly (hoping to choose the username like i used to) and then the screen's all white-and-gray thing. Any idea why, and how, to fix this? also how much would it cost? thanks

nothing, my mouse just stops at the edge of my screen. but i have it mirrored. when i turn mirror off then my mouse goes of the screen but nothing happens on the display. i am going to take it in to the store tonight and see if they can send it back and fix it.
thanks
chris

My one month old laptop turns on but nothing appears on screen...help

MMy laptop turns on but nothing appears on the black screen

Try to launch your Mac in Safe mode by taking these steps:
- Click on the Apple sign() at the upper left corner of the Desktop, select 'Shut down' from a drop-down menu;
- Wait until your computer turns off, then press the Power button(⌽);
- Immediately after you hear the startup tone, press and hold the Shift(⇧) key. It should be held as soon as possible after the startup tone, but not before the tone;
- Release the Shift(⇧) key when you see a grey Apple sign() and the progress bar below;
This will force the system to perform several maintenance routines and load essential system software.
Once you've seen the Desktop
- Open Disk Utility application:
1. Click on Finder at the bottom of your Desktop;
2. Select Applications folder from Finder's left sidebar and then open Utilities folder (or press Command(⌘)-Shift(⇧)-U), double-click on Disk Utility icon;
- Choose your main hard drive from the left sidebar ('Macintosh HD', usually);
- Click on 'Verify Disc' at the bottom right corner, your Mac will perform a diagnostic test. Click on 'Repair Disk' if prompted to fix problems, or follow instructions given on the Disk Utility window;
- Once the routine finished, click on ""Verify Disc Permissions"", after it's done, click on 'Repair Disc Permissions';
Wait until it will finish and restart your mac

When I tried to update to os6 on my iPad2, it says "Your iPad was updated successfully, but when I hit "continue" the bar turns blue, but nothing happens. I powered off and restarted, but nothing changed.

When I tried to update to OS6 on my iPad 2, it got as far as "Your iPad was updated successfully. There are just a few more steps to follow, and then you're done!" The Continue bar at the bottom turns blue momentarily, then back to white. Nothing happens. I powered off and back on, still nothing. When I use the "Home" button, it says "Setup incomplete" but won't continue. Any thoughts?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

Satellite P300 - power lights on, but nothing happens on screen

Hello,
I have a Toshiba Satellite P300-1F0, yesterday it was working fine, I turn it off without nothing extraordinary happens.
Although later when I wanted to turn it on I pressed the power button but the screen wasnt working, I tried to connect an external screen but nothing was shown on it, although the power lights were on, the cd reader opened and closed like normally does, and I could hear the fans working.
Than I realise the windows 7 welcome sounds weren't playing even after some minutes with the laptop turned on, and that the mouse laser only worked for some seconds before it turns off.
This was when I started to belive that it wasnt a screen problem but something else.
I read some forums, and I tried to disconnect the power cable, take out the battery, pressing the power button for 60sec and turn it on, and it worked, everything was working fine, I used the computer for some hours without any issue.
Today the same problem occured, and I tried to fix it the same way I did yesterday, holding the power button for 60 sec, but this time it didnt work. I retried this for 3 to 5 times and nothing.
After some hours letting the computer turned off, resting, I retried the process and now it worked.
Now I'm afraid to turn off the laptop, because to turn it on I need a lot of pacience and time.
What could be the problem, and how I solve it?
Can you help me?
cumpliments,
Adriano

>I read some forums, and I tried to disconnect the power cable, take out the battery, pressing the power button for 60sec and turn it on, and it worked, everything was working fine, I used the computer for some hours without any issue.
Yey, sometimes this workaround is helpful to bring the unit back the life.
> What could be the problem, and how I solve it?
Its difficult to say what cause this. The Satellite P300 is an old notebook model therefore it could be possible that one of the hardware parts starts to malfunction.
It would be interesting to know if usage of different RAM modules would change the notebook functionality. If you have some spare compatible RAM modules you could test it.
In worst case it could be possible that notebook motherboard start to malfunction.
This would be the worst case I hope for you that its not mobo related issue.
PS: check if your BIOS is up to date. In case its not the latest version, try to update the BIOS.

17inch iMac turns on but nothing happens but boot up sound

hi my late 2006 17" iMac goes to a blank screen when turnt on and does nothing else but make start up sound, could the logic board be broken or is it something else?

Probably, you need to take it in though to find out how much. The computer is 6+ years old, it may simply be time to be replaced.

My mac turn on but nothing happens pls help..

i got this macbook pro 15inch..it had a hard drive problem before so changed the hard drive then installed the os x snow leopard nd other applications....then it started to frezzing after i watch a movie then it went off the i troubleshooting it and reset the pmu it was fine for a day then it did the same this but time nothing is happening it boot up but nothing now the display is black and even i put in an external display it doesn't do anything... pls help

Take it to an Apple store or AASP.

I click on the plus symble next to a tab, to open a new tab, the plus symble turns blue, but nothing happens. Why?

I want to open a new tab, I click on the PLUS next to the last tab opened, it turns blue, but does nothing. No new tab is open

Caused by the Ask Toolbar extension in Firefox 3.6.13+, disable that extension or un-install it.

Toshiba equium a100-147- light turns on but nothing happens - HELP

My mum has a toshiba equium a100-147, and it doesn't appear to want to turn on.
The power light sometimes only comes on very dim when you pess the power button, other times it comes on bright.
I've tried unplugging the HDD and putting it back in, tried it with just one of the each sticks of ram in, checked that it's just a screen issue by plugging it into an external HDD, all with no luck. I did even unplug and plug the screen into the laptop itself just incase the cable came a bit loose.
Basically though, it does turn on, like the fans and the light comes on, but absolutely nothing else happens. The screen doesn't turn on at all.
Anything I can do?

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region. If it's a European model, you could check the Toshiba Europe forums.
- Peter

Ipod will turn on but nothing appears on screen

ok, so i bought a ipod on ebay the other day! when i got it i charged and turned it on,the backlight of the screen turned on and that was it~there was nothing else! i can here the click wheel but thats it! what can i do to fix it! help me

Hi, I got the same problem. Its a IPod mini and have been using it for the last 8 months. Problem started a couple of week ago. But i can transfer and listen to the songs as i know the order of my playlists on the IPod.

Hp Pavillion Elite m9040n-Computer turns on but nothing happens

I have an old Hp Pavillion Elite m9040n that runs Windows Vista home 64bit.
I'll try to recall what happened. I always had trouble with the computer running slow, but earlier this year I had some trouble with malware that started causing the computer to crash. I cleared the malware out and because I was still having problems with windows running slow I removed windows vista and installed an older version of Ubuntu(which was also acting funny as far as freezing up and refusing to run programs. One day I got another blue screen of death and it would do it every time I restarted the computer. Now when I start up the computer, the monitor immediately goes to sleep and the computer makes no noise except for the fans running.
Sorry if this isn't enough info, I'm in a rush right now. I'll answer any other questions about the problem if necessary.

Hi , Have you tried to reseat the RAM ( memory ) in your computer ? Let me know if you know how to do this if not i can talk you through it . If a memory module has failed it will stop the computer from starting . Could also be a failed power supply but checking the RAM first is the best way forward. Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

G4 turns on but nothing happens...HELP

Help, i am a new mac user, i bought a used Power Mac G4 (FW800) from a someone. I have been using it for about 5 months now with no problems untill yesterday. I was surfing the net and it froze on me, i managed to restart it but thats when the problem started. It restarted but it froze on me again 10mins later. On the second restart the tower turned on(all lights came on) and i could open the disk drive but the monitor would not read, and the mouse/keyboad would not turn on. I seems like the hard drive isn't kicking in so the operating system wont start up
The specs of the computer is :
2MB DDR SRAM per processor167MHz512MB PC2700 (333MHz)DDR SDRAM120GB Ultra ATA/100; 7200 rpm5SuperDrive (DVD-R/CD-RW)ATI Radeon 9000 Pro with64MB of DDR SDRAM
I dont know what else to say, I hope this is enough info.
G4 power mac Mac OS X (10.3.9)

Hi-
Getting a folder with a flashing question mark means that the computer can't find the startup system folder. It also means that you didn't boot to the install CD. When you startup (to boot from the CD) you need to hold the c key immediately, and continue to hold until the OS Install program begins to load.
this should all occur in uner a minute.
So, to find your system folder for the computer, the first step is to repair the startup drive with Disk Utility while booted from the install disk:
-Insert the Mac OS X Install or Restore disc.
-Restart the computer, then hold the C key during startup.
-From the Apple menu, choose Disk Utility. Do this in the first screen of the Installer. Don't click Continue. If you click Continue in a Mac OS X Installer version earlier than 10.2, you must restart from CD again.
-Click the First Aid tab.
-Click Repair Disk.
-After repairing the disk, try to start from the Mac OS X hard disk (startup drive).
You can also try and find the startup drive by using the Startup manager:
-Turn on, or restart, the computer.
-Immediately hold the Option key. After a few seconds, the Startup Manger should appear. The Startup Manager scans for available volumes.
-Optional: Clicking the circular arrow rescans for other volumes, including NetBoot Server volumes. You can eject any disc in the drive or open an empty tray-loading drive by holding down the Eject key (F12 or key with eject symbol) or, on models that do not have an eject key, holding down Command (Apple) and Period (.) keys. The eject key or Command-Period combination (on models with no eject key) will also close the tray. After inserting a CD capable of starting up your computer, you could rescan for volumes.
-Click the startup volume you want to use. In the example above, two startup volumes are available: a hard disk, and a CD-ROM disc. The volume's name does not appear.
-Click the right arrow button to start up the computer from the volume you selected.
If these steps fail, then try a NVRAM/PRAM reset:
Resetting PRAM and NVRAM
-Shut down the computer.
-Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
-Turn on the computer.
-Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
-Hold the keys down until the computer restarts and you hear the startup sound for the second time.
-Release the keys.
If you still are not able to startup, try and repair your hard drive through Open Firmware, running fsck. the following explains:
http://docs.info.apple.com/article.html?artnum=106214
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

I turned off icloud now i want to turn on but nothing happens when i am in settings and icloud doesn't work

When i registered this ipod tough I told it not to use i cloud and now i do because I want to use the new find my Ipod.But when I go to settings and icloud is there i am not able to slide to open icloud.I am sure it is very simple but I cant figure it out.My daughters I pod i didnt do that when i set it up so i just need to undo what I did.Please help.

That setting is for turning on iTunes Match, if you are an iTunes Match subscriber. (iTunes Match is a separate service you can pay to subscribe to which will allow you to access your music library from iCloud - see http://www.apple.com/itunes/itunes-match/. When it is turned on, all music on the device is deleted and must then be accessed through your iTunes Match account.)
To turn on iCloud, you go to Settings>iCloud, turn it one and provide you Apple ID with a verifiable email address. See http://www.apple.com/icloud/setup/ios.html.

My iMac turns on but nothing appears on screen?

I just bought an iMac G5 that from someone I know and he told me something was wrong with it. When I turn it on I hear the chime, the light on the front turns on, the fan turns on and I hear disks spinning which sounds like the superdrive. I took it apart thinking it had to do with the motherboard because he said thats what it was and the lights on the motherboard turn on also. What could the problem be?

You really need to get the install discs from the previous owner, or you can get them from Apple, but you should have them handy. You can try booting from the Leopard disc and using Disk Utility to verufy/repair the hard drive.

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace

N81 turns on but nothing happens... blank screen

Similar Messages

Maybe you are looking for