N81 WLAN connecting problem

I bought my phone two years back. For the past three months,I am not able to use WIFI in my phone. Its showing all available networks. But when i try to use any network, even after defining access point, it show " connection not available". My phone is updated to the latest version. Guys having knowledge in this area, pls help me out.

Till or since last month? Could it be a hardware failure? Did you try the Nokia Software Recovery Tool?

Similar Messages

N95 WLAN Connection problems - Orange Livebox (UK)

I am trying to get the N95 to connect to the internet wirelessly through Orange Livebox (UK). I have run the WLAN wizard and the phone has identified it. I have input the WEP key and thats worked fine.......except everytime I try to connect to the net via this method I get a connection error. Has anybody else had WLAN connection problems? Can anybody help?

hi,
did you press "1" button at the back of the Livebox before pairing ?
what kind of error message do you get on the N95 ?
does it fail the same way when you go through the homescreen "WiFi scanning / Start Web Browsing" or through Tools / WLAN Wizard ?
Cheers,

E71 Wlan connection problems

Hi all
Have been trying to log on to my secure home network using my E71 & have not been successful. I go to all the steps as per the manual including key in the
Pre-shared key for Wlan which I guess is my Wlan password, is this correct?
I get an error message
Wlan unable to connect
Wlan network not found??
This is a strange message when it has detected the network in the first place? Anyone have any ideas?

Yeah, I'm having similar problems. The phone detects the router WLAN, but the router does not detect the phone WLAN. The message I get is: No reaction from gateway.
I suspect that there is an issue with how the various manufacturers implement 802.11b/g
According to the Nokia Os 9.2 the following is supported:
WLAN IEEE 802.11b/g
WLAN Security: WEP, 802.1X, WPA, WPA2
TCP/IP support
My router states the same (Thomson Speedtouch 780) and yet my router cannot detect my Nokia device, even from 30 cm distance.
I may have to upgrade the router firmware to get this to work; still waiting for a reply by Alcatel/Thomson

N81 Bluetooth connection problem

Hi, I have the N81 8gb, I have only had the phone for two days but I am experiencing a problem when it tries to automatically connect to my Pioneer DEH-P85BT bluetooth car radio. It finds the phone, connects to it, then immediately disconnects, my Nokia E65 connects straight away with no problem. I have paired the N81 with the radio and set it as authorised, I have set the car radio to automatically connect to the N81 and registered the phone with the radio, but am still having the problem. Has anyone any ideas I can try to solve this problem.

Well, I dont know but I remember thyat one person said that bluetooth became inactive when using the gps. I dont know is this may apply for your case but on somehow it seemed that there were a conflict between both of them.
No I dont know if you are receiving the gps position via bluetooth from another device or are you sendind via bluetooth from a gps on the same device.

N80 WLAN Connection problem

After updating to V4.0623.0.41, when trying to connect to internet 'No gateway reply' message appears. There were no WLAN problems with the older software. Any solutions?

04-Sep-2006
06:49 PM
alexfromboston wrote:
Thanks a lot pfloding for your input. It seems though to be a different problem - your phone suddenly drops quality of 3G and WLAN communications. I would definitely have contacted Nokia or whoever sold you this baby ‘cause from what you describe it looks faulty to me.
I don't think it is a hardware problem, as battery life, 3G reception and WLAN suddenly works much better. My guess is that something in the WLAN implementation causes the phone to go into some kind of fruitless loop, wasting battery and interfering with 3G. I have turned of the WLAN setting "Show availability" now (WLAN works fine anyway), and so far things seem better!

WLAN Connectivity problems using Nokia 5800 Xpress...

Folks,
I really need help here.
I am trying to connect to my company WLAN called BLUESSO.
The visible config settings required to access this hidden WLAN access point are as seen in the attachment also seen below:
SSID: BLUESSO
Encryption type: TKIP
Network Authentication: WPA-Enterprise
EAP Method: PEAP
Inner EAP Method: GTC
Validation Server Certificate: Any Trusted CA-
Server Name: wlan.xx.com
My Phone is a Nokia 5800 XPressMusic
Firmware: 31.2.101 14-10-09mRM-428 (C)NMP - Latest Firmware
My Settings are:
I set up my phone as follows:
Data bearer: Wireless LAN
WLAN Network Name: BLUESSO
Network Status: Hidden
WLAN NETWORK MODE: Infrastructure
WLAN Security Mode: WPA/WPA2
WPA2 Only mode: No
WLAN SECURITY SETTINGS: EAP
EAP Plugging Settings:
    - EAP-PEAP
                        Personal Certificate: Not Defined
                        Authority Certificate: Thawte Server CA Tha.....
                        User Name in use: User Defined
                        User Name: 212058402
                        Realm in use: User Defined
                        Realm: wlan.ge.com
                        TLS Privacy: Off
                        Allow PEAPv0: Yes
                        Allow PEAPv1: Yes
                        Allow PEAPv2: No
                                                EAP-GTC
                                                                 User Name: 212058402
Advanced Settings:
    IPv4 settings: automatic
    IPv6 settings: automatic
    Proxy server address: gems.setpac.ge.com:1533/pac.pac
    Proxy port number: 1533
I can see the BLUESSO Access points. Signal Strength is always between 80% and 100%
1- Unfortunately, My phone is able to connect. Is there something wrong with my setting?
Any suggestions?
2- I also have the ability to connect using the 802.1x protocol used by Apple machines. Can you advice on settings please?
3- Is WPA Enterprise same as WPA2 in my phone or is there a special pluggin I have to download to get and WPA2 Enterprise security feature?
4- How to I access the TKIP encryption in my phone?
Can somebody provide me with some technical advise?
Thanks in advance
Joe
Nokia 5800 XpressMusic
V 40.2.005.236.04
Type: RM-428

Update to my Network Connectivity Dilemma.
Please correct me if I am wrong.
It seems I can use 802.1x WI-FI Security mode authentication to connect to WLANs that are configured for WPA2 Enterprise since both authentication methods use the same security settings in a WLan Infrastructure.
They both have EAP with similar EAP Plug-in settings.
If this theory is correct, then I can use my Nokia 5800 to access a WPA2 Enterprise authentication Wlan with the 802.1x WI-FI Security mode.
Objections any body?
Monk
Joe
Nokia 5800 XpressMusic
V 40.2.005.236.04
Type: RM-428

E71 WLAN connection problem

hello, i just brought a nokia E71 about 2 hours ago, and i get home to setup the wlan settings, and i typed in the password wrong and now i cant get back to being able to re type in the password and now it keeps asking me for "pre shared key for wlan"
how do i fix this, because the phone is pretty much useless unless i can use my wifi connection

problem is it dosnt actually ask for a password it asked for pre shared key for wlan
i was at a friends house last night who only had WEP basic protection and when i tried to connect it asked for the password not a pre shared key.
if i take away my wifi password and only give it low WEP protection should that fix it?

WLan driver installation solved WLan connection problems on Satellite P200

After 2 fruitless days of trying to get my wireless adapter to recognize my home network I finally stumbled on the solution. I have a Satelitte P200 which used the AtherosAR5007EG adapter.
If you go back to the Windows XP 32 bit drivers it works like a charm. Installed the new driver and it found my network right away and I could get on the internet.

Hi
You are a owner of the new P200? Its a great notebook I like the design
Anyway thanks for the great info and I wonder that a XP WLan driver works with Vista OS
Bye

Nokia n8 wlan wifi connectivity problems

I purchased Nokia N8 about 2 months ago. Lovely phone, camera etc. However I am having serious issues with wlan/wifi. I have set up my phone to connect only to wifi or wlan. I believe I have all the settings correct. But when I try to connect to the web I keep getting the message that connection charges will be incurred etc and when I click on it goes online using my phone internet ie O2 wap service or my O2 internet service. Therefore I am being charged even though I have connected to wifi. I have tried everything but this is getting really annoying. I am abroad at the momen and my hotel has free wifi etc. Even when I have gone into my O2 store I might aswell be talking to the wall. No good. I should have purchased an Apple I4. Can someone please help me.
Solved!
Go to Solution.

For all people experiencing problems with N8 (and some C series phones) and WLAN connections : Is your router a Linksys, Alcatel, Thompson or Speedtouch?
I had a Speedtouch 585 router v7 and couldn't connect to my home WiFi, but could connect at my friends' Wi-Fi's. I tried renaming the SSID with no blanks, manually setting the IP's and DNS, but the problem persisted. And the problem was the router. Since the firmware upgrade, the QoS (Quality of service) parameter cannot be tampered with. You have to turn it off manually. To do so, do this :
1) Open a command line window (start-->accessories-->command line OR start-->run--> type "cmd")
2) type telnet 192.168.1.254 and press enter (this was the router's IP address in my case, it may be 192.168.1.0 or 192.168.0.1) (If it doesn't connect right-click the connection icon at the bottom of the screen-->properties-->TCP/IP and note the IP address)
3)enter your username and press enter (default admin)
4)enter your password and press enter (default <blank>)
5)the router command line logo should appear. Type wireless and press enter
6)type qos and press enter
7)type config mode disabled and press enter
8)type saveall and press enter
9)type exit and press enter
Find your WiFi in your N8 as usual (delete any previous access points of your WiFi if any) and set it as first in priority (in N8 : settings-->connectivity-->settings-->network destinations-->internet)
You are ready !
Thanks to the original writer here : http://morgis.net/Nokia%20ugyldig%20server%20navn.htm

Asha 302 wifi problem - "WLAN connection failed"

I have nokia asha 302 two days. I have problem with wifi connection. I see "my wifi" in wifi list, but when I click connect, I get message "WLAN connection failed". Version of mobile Asha is 14.78.
I have router Ovislink WN-200R. My wifi setinngs is in attachment (set 1).
I tried to change password, change security system, set to without security system, ... - without changing. At last I found bug and one solution. When I set wifi, how is in attachment (set 2), is to possible to connect with Asha 302.
But in my house I use PC with wifi N for speed. Do you know any other solution?
PS. I use Nokia 5530, Iphone 4GS, HTC desire S too. And I don`t have this problem.
Thanks a lot
Attachments:
Asha_302_wifi_problem.png ‏98 KB

DennIz wrote:
"Wrong Password"
There are several reasons why that could happen. One reason: Your network changed from WPA2-PSK back to WPA1-PSK. Some Wi-Fi access-points have silly mixed-mode settings. If your network is in mixed mode, first try the old version: WPA-only (WPA-PSK). Because some very old Wi-Fi access-points do not support WPA2 correctly even for multicast, as next step try the more secure version 2: WPA2-PSK. If that does not work:
Do you have a Mac OS X computer around?
If yes, please, go to Applications » Utilities » Terminal and enter
/System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport -I -s
The last part (Security) should be ‘WPA2(PSK/AES/AES)’ and nothing else.
Do you have a Windows Vista, Windows 7, or Windows 8 computer around?
If yes, please, open a command prompt (as Administrator, keys: Windows-R), and enter
netsh wlan show networks mode=bssid
The network type has to be not Ad-hoc but Infrastructure.
The basic rates should be ‘1 2 5.5 6 11 12 24’ (IEEE 802.11g/n) and nothing else.
Do you have a Android device around?
If yes, install the free Wifi Analyzer. Within that tool, please, tap the wrench icon (Settings) » Show full securities. Then go back and have a look at your Wi-Fi.
It must be [WPA2-PSK-CCMP][ESS] and nothing else.
If the connection still fails, please go to the configuration interface of your Wi-Fi access point and change your access-point back to the old WPA-PSK (TKIP-only) and 802.11g (only). If not available, avoid 802.11n and go for 802.11b/g. Does it work now?
If it still does not work, change your settings back to WPA2-PSK (AES-CCMP) only and 802.11g/n. Then, post the results of the above tools. If you do not like to post them into the public, you can send me a private message. But those information are public to your neighbours anyway.

N97 connectivity problems. N97 connects with WLAN ...

Hi,
A few days ago I installed the new firmware version 21 on my N97. Now when I turn on my phone it wants to connect to a wlan so that the phone can use that connection for your widgets that require internet. Before update 21 it always would connect with my mobile internet which is want I want it to do. This is not a problem for some apps since I can change the settings for those apps and have them connect to the mobile internet. But for some apps like the Ovi store or downloads of updates for my phone keeps asking for a wlan connection which in fact is turned off in my settings so why is it even asking for wlan?! The problem for those apps is that I can't change the settings so that they also connect with my mobile internet just like before with firmware version 20. I hope that you can solve this issue?

>but what happens if the biosupdate fails and the Lappy dont work anymore, is this ok with the garantee ?
Before you start BIOS update please check Toshiba BIOS-Update Information .
Bye and good luck!

Thinkpad X220: bad wlan connection when docked and lid closed

Dear forum
I use a Lenovo ThinkPad X220. I have no trouble with the wlan connection when i use the notebook alone. The wlan connection is also stable when i use the notebook plugged in the dockingstation with the lid open. But when I use the notebook plugged in the dockingstation with the lid closed my wlan connection drops regularely to about 2 Mbps and gets very unstable.
The ThinkPad uses the Intel Centrino Advanced-N 6205 wlan network controller:
$ lspci | grep 6205
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
The network controller uses the iwlwifi driver, that comes with the current linux-firmware package:
$ pacman -Ss linux-firmware
core/linux-firmware 20150206.17657c3-1 [Installiert]
Firmware files for Linux
I didn't change any options of the kernel module, everything runs in default mode:
$ modinfo -p iwlwifi
swcrypto:using crypto in software (default 0 [hardware]) (int)
11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
amsdu_size_8K:enable 8K amsdu size (default 0) (int)
fw_restart:restart firmware in case of error (default true) (bool)
antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int)
wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1) (int)
nvm_file:NVM file name (charp)
uapsd_disable:disable U-APSD functionality (default: Y) (bool)
bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
power_save:enable WiFi power management (default: disable) (bool)
power_level:default power save level (range from 1 - 5, default: 1) (int)
fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool)
At first I thought, the problem could be caused by the KDE power saving settings. I changed the settings, so nothing happens when I close the lid (no hibbernation or screen lock or something like that), but without success (the wlan connection is still unstable under the described circumstances).
Also dmesg shows nothing that points out a problem (as far as I can see):
$ dmesg | grep iwlwifi
[ 19.688522] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 19.688679] iwlwifi 0000:03:00.0: irq 31 for MSI/MSI-X
[ 19.696095] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 19.718023] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 19.718027] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 19.718028] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 19.718029] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 19.718145] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 19.753757] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 20.128443] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 20.128652] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 20.403905] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 20.404212] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 68.922975] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 68.923192] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
So I have no idea where this strange behaviour comes from (only wild guesses: buildfactor, antenna orientation,...).
Any help would be really appreciated.

hmmm...
how about checking both your wired and wireless nic drivers in device manager to make sure that the "allow computer to turn off this device to save power" checkbox on the power management tab is deselected.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

2504 controller + 2602 APs = wireless clients connectivity problems

Hello, everybody!
I have a connectivity problems of wireless clients. The symptoms are:
1) Some clients receive 169.254.x.x., instead a correct DHCP addresses, less in a minute connection drops, and in controller's "Monitor" > "Clients" tab these clients are marked as "Excluded".
2) Most of the clients receive the correct addresses from DHCP (192.168.2.x), but also loose connection soon.
3) Wireless clients with correct addresses can't ping each other, gateway and an address of the controller's dynamic interface (all of them are in same subnet).
4) And the most suspicious problem is that some machines are unable to connect to APs after several attemps to do that. I mean, I configure controller and change some options, trying to understand, whether they were applied or not and constantly connect and disconnet certain PC to the SSID. After five or ten attempts I can't connect to the SSID. During these attempts, the others PCs stay connected, without interruptions, and they could be reconnected again. It's like some kind of port security works, but I'm not sure...
Do you have any ideas which options should I configure?
My configuration:
I have three interfaces on the controller: virtual, management (default) and dynamic (it is set to the WLAN)
I have one SSID, WPA/WPA2, AES/TKIP, authentication PSK.
My clients are a/b/g/n, all are permitted on the controller. No custom security policies were applied.
All the devices are in a single room: controller, one AP and different clients: desktop, notebooks, iPad, Nokia Lumia, etc.
I have an internal DHCP Server on the controller and it works perfectly well.
I can provide all the screenshots required from web-interface of the controller...
Many thanks in advance for all ideas that you have about these problems...

Hi, there!
The problem was solved.
1) APIPA address receives only single machine with Win8 - I think there are some firewall issues
2) Other devices have been loosing connection because they were mobile devices, like iPad and Lumia. If you keep working with it, it doesn't drop the connection
3) The dynamic interface address and gateway address were inaccessible because i had not used an appropriate port on the controller. =)))) Firstly, it was just a guess, but it proved.
Now, everything works with WPA2, AES, PSK...
It is a very good day!)
The only question remains: why I can't connect machines, which have a static IP? During the controller initialization, I said "yes" for permitting static IPs...
Guys, many thanks for your help!

Firefox with wlan connect on laptop gives no connect what I need to maake wlan connect, network is ok

have a bought a hp pavilion g series. had trouble with installation and updates. now problem that firefox with wlan has no connection. suse linux 12.1, wireless lan 802.11, FRITZ!Box Fon WLAN 7270, find no setup for wlaan in firefox that over the laptop wlan connection will work

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
See "Firefox connection settings" in [[Server not found]]
You can find the connection setting here: Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select ''No Proxy''

WRT54GL loses Wlan connection

Hi
I have a problem with an WRT54GL Router. It keeps losing the Wlan connection. Then I have to reboot the router to get it working again.
On some days everything works fine, and the other day I have to reboot every 5 minutes.
I don´t use P2P. So there are not many simultaneous connections. Mostly there are only one or two Wlan Clients active.
Between the Router and the Client is only one Wall. Signal Strenght is at all times above 85%.
Does anyone have an idea what might cause this?

Try upgrading your router's firmware and reconfigure it from the scratch.
Click on this link for the instruction.

N81 WLAN connecting problem

Similar Messages

Maybe you are looking for