N810 WiMAX
i am considering getting the 810, but i need to know how much do do i need to pay monthly to get WiMAX, and can i even get WiMAX, i live in vacaville, CA
Which is near Sacramento
i looked on that XOHM site but i couldnt find anything on which cities are available
and also from anyones experience does Skype have good quality and is there trouble with long (not long distance, but in time) calls
Thanks for any help
Message Edited by 1onething on 04-Sep-2008 06:56 AM
In Seattle, can't get connected to Clear on the Nokia n810 wimax. Running Maemo 4.1 (Diablo) and have the clearwire-settings update on it. With Clear, we checked the MAC # carefully, and in the Nokia n810 connection manager, the device picks up the Wimax signal, and there's a strength bar. This is as far as I can go. I get a message about provisioning, and the Clear rep. then says they are provisioning the device from their end. Then, nothing. Clear can not pick up my device, nor can I finish connecting to their service. Just get an error message about unable to connect. The signal is good, and I have tried it from different neighborhoods around the tower. Tech. support speculated that maybe the device only works in xohm or former xohn markets, and not markets where Clear came in fresh with the newer (incompatible) equipment. I found a "Wimax Positioning Quick Reference Guide" put out by Verizon, which shows the Nokia n810 wimax device as a xohm device, in the Baltimore, Chicago, D.C., Boston, Dallas, and Philly market. On the other hand, the chart showed wimax-ready notebooks as listed devices for Sprint/Clearwire for Atlanta, Las Vegas, Portland, Boise, Seattle, Chicago, Dallas, Phlilly, Seattle, San Fran, New York, D.C., etc. Finally, Clear said they did not think one of their Connection Managers would work, as the device was meant to connect directly to the wimax. I have also heard that in xohm markets, the xohm modems were not compatible with Clear when they began rolling out service in those markets. Can anyone make sense of all this? Do I have any chance of getting clear wimax on my Nokia n810 wimax in Seattle?
Attachments:
Wimax Provider Device Chart.pdf 941 KB
Similar Messages
-
Friends,
I have just purchased Nokia N810 wimax series internet tablet but now I have a problem acessing Internet using the Vodafone USB modem which is windows based & not Linux based.
So do we have any service provider in India who gives Linux based USB modem or rather one compatible with N810 wimax.....
This is very urgent guys coz i have to make presentation using it in 2 days.Check this thread from the OpenSolaris forums. It should apply to Sol11E.
http://www.opensolaris.org/jive/thread.jspa?messageID=372607&tstart=0 -
Newbie needs best non-phone internet tablet
I'm on a quest for the "right" device for my needs which are primarily music and movie viewing but I want a good browsing experience with some texting. Every time I think I've found a great solution it turns out to be either 2 years old or so bleeding edge I can' get my hands on it for months. I'm here to ask about the N810 WiMax (or other) edition. It looks pretty darn good but it's already a dead item. Have I missed the current iteration of it? They can still be found. Would you buy one now given what else is out there?
I do not want iTouch or Zune (don't like that they are proprietary).
Found Creative Labs and liked their Vision Wide which has a huge screen but is as old or older than the N810. Their newest item XFi2 has a 3" screen which seems a bit small.
Also considering something from Archos. I was looking at their 5 v 7 and decided while the 7" was lovely it was too big. Then I noticed they JUST released a 5" tablet with Android. It looks pretty HOT... but it's so dang new I can't get one in time for an October 24th flight which is what prompted my wanting a tablet for movie viewing in flight.
I'm open to all input be it Nokia or other options. Thank you.
Sheila in SeattleThe iPhone works fine over cellular. You did mention a certificate - I am going to guess that this may be the issue.
If you open Safari on the iPhone and connect to your OWA, do you get a warning? When you viewed the cert in IE, is it self-signed? If so you need to get it on the iPhone. The easiest way is to set up gmail or something similar on iPhone and email it to yourself.
when it come in email your iPhone will immediately recognize it as a file that you can import it. Select it and import it, then you should be able to connect to your Outside Exchange server. -
Hi,
I am doing one application. For that I need default midlet icon size for the following models:
1. Nokia E90 Communicator
2. Nokia N810 WiMAX Edition
3.Nokia N810
4. Nokia N800
.. I need this immediately. Please help me.
Thanks
JanaHi,
See http://devices.j2mepolish.org/interactivedb/searchdevices.faces and select "iconsize" in
"Additional columns to show".
Hope that help,
Jack -
N810 (Internet Tablet): Is it possible to have the...
Hello,
I have a brand new Nokia N810 with a built-in GPS. There is a Map application from WayFinder (a company that is only contactable via a non working web form!) included with the device. The map application starts fine, and have maps for my country (Sweden). When the application starts it also starts the GPS. That is, the GPS icon appears alongside the connection, bluetooth, etc icons att the top of the screen. The "View->GPS view" menu pops up a window showing the number of satelites it have found, and it does find satelites!
Now my problem is that there seem to be now way whatsoever to make the map actually show the GPS position! There is a "View->Show actual position" meny entry, but it has no effect. If the map shows Sundsvall (a city high up north in Sweden) and I'm in Stockholm, the map still shows Sunsvall after I select "View->Show actual position".
There is also an icon at the bottom right of the screen (looks like a plus with a box around it). I have no idea what it does, but nothing happens when I press it. I though it might be "show my position", but it is as useless as the meny entry.
Is there any way to get the map to show the actual GPS position ?
I also installed the MaemoMapper applictaion, which according to its documentation should also be able to make use of the GPS, but it fails talking to the GPS no matter what I do. I have selected the /dev/pgps device as suggested by the application, and I have verified that the device exists in the /dev filesystem, but it refuses.
Could it be that my built-in GPS simply does not work ? If so, how do I prove it is faulty so that I can return my N810 and get a new one ?
Thanks beforehand for any help or suggestions.
Best Regards,
Tommy SvenssonI had the same experience as you describe, but I did get it to work. First, go outside. It doesn't work from a windowsill in my experience. Car should be OK, too! Second, Maemo Mapper doesn't seem to find the GPS until the built-in Maps application is running also. I think I also used the "GPSD host" choice. I don't really remember because I didn't like Maemo Mapper even after I did get it to find my GPS. I purchased the premium nav application, and it works great for me. You get a car-friendly GUI that isn't there in the default version. In the car, it takes a minute or two to find the satellites.
-
Intel Wimax 5350 not working with windows 7/t400
As someone who uses server 2008 on my desktop, when i received my t400 a few days ago i balked at the idea of using vista. so i decided to download and install 64bit windows 7 (from vista 32bit...i did a clean install though...i believe). i had not heard of anyone having trouble with wireless drivers in windows 7 and indeed intel states on their website that windows 7 will automatically install the drivers for the 5350 wireless card.
unfortunately, when windows 7 installation was complete the drivers were not installed and i did not have internet access. so i had to take the usb wireless adapter from my desktop and plug it in to access the internet. windows update did not fix the issue. so i installed the visa 64bit intel drivers and windows told me that my wimax device was recognized, the drivers were installed, etc.
except the wireless card still wouldn't work! currently under network adapters it is listen as local area connection 2/network cable unplugged/intel wimax link 5350. i don't understand this...shouldn't it be listed as a wireless network connect as my usb adapter is?
i think the problem might be that under device manager, i do not have a driver for network controller, pci serial port, or pci simple communications controller.
this is quite frustrating and i really regret not having put more thought into this windows 7 installation.
thanks for the help
Solved!
Go to Solution.I've got a T400 with a Intel 5350 and Windows 7 x64, I downloaded and installed the
Intel® PRO/Wireless and WiFi Link Drivers-Only for Windows Vista* (3298KB) and the
Intel® PROSet/Wireless WiMAX Connection Utility for Windows Vista* 64-Bit (9206KB) from the website listed below.
http://downloadcenter.intel.com
Furthermore, my "Intel(R) WiFi Link 5350" and "Intel(R) WiMAX Link 5350" listed in the "Network Adapters" category, I dont have any "Wireless Network Connect" category at all.
Hope this helps!
Message Edited by Aiwi on 07-15-2009 02:04 PM -
Hi.
I am using a NI VST to generate WiMAX signal. I have installed NI Measurement Suit for Mobile/Fixed WiMAX 1.0 on the compute. But I can't find any option on the front pannel of the generation suit to enable AMC or PUSC for generated signal. Does such feauture exist at all?
Thanks.
Solved!
Go to Solution.Hello sam2013ni,
This is all that I am seeing for AMC and PUSC. Look in 'Zone Type'.
Best regards,
K. Anderson
Applications Engineer
National Instruments -
TS1398 I have wifi problem with WiMax router.
I tied to do all of ways. but it was useless to me using wimax rounter.
When other iOS version of iPhones & other android phones connect to my WiMax rounter, speed of download is average 6Mbps. Speed of upload is average 4Mbps.
but when my iPhone5 using iOS6.1b4(sure, I tired to test on iOS6.0.2) connects to the router, speed of download is average 0.3Mbps, speed of upload is average 1Mbps. sometime speed of download is 4Mbps, speed of upload is 2Mbps... what can i do??Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
I have a N810. About 2 weeks ago the email app stopped working. When I start the email app my Inbox appears and after about 10 seconds there is a dialog box that says Error occurred. There is no other information and the email app closes. I am unable to check settings or anything as email just produces this error and closes.
I have done a software update as well as a refresh of the OS2008 install and I still get the same error. Can someone assist in some further diagnosis of what is wrong? There appears to be no log file that I can find.
Interesting thing is that the email checking that goes on in the background and pops notifications of new email is still working but I cannot look at the email.
I am able to look at the email with my regular email app on my mac with no issues. I have installed Modest and it works although it is not very stable at the moment and does not integrate into the tablet interface like the original email app does.
It is possible that the local email store is corrupt and I would happily delete that except I do not know where it is in the file system.
Any help would be appreciated.I found the answer myself.
In SCOT, SMTP setting, Output format for ABAP list needs to be set as 'PDF' or 'TXT' instead of 'HTM'.
With HTM, it was going in for error for spool email.
Regards,
Diwakar -
Flash9 on Nokia N810 does not recognize microphone nor camera (works or not?)
Hi.
I'm testing a Nokia N810 to port some realtime webservice on
this kind
of platform (really good device).
I can read everywhere in the web that n810 comes with "full
Adobe Flash9
plugin" but this plugin seems not be able to recognize
microphone nor
camera hardware. I would need to publish at least an audio
stream (with
fcs): is possible or not?
and with Nokia E90 (Flash Light 3)?
thank you.
Massimiliano Carli
http://start.mc2labs.comHi Massimiliano,
N810 has FP9 pre-installed and is supported in the browser.
What camera and mic are you trying to access on the device?
Have you used any sample code from Flash authoring to test
this out? -
How to connect the Wimax Usb stick ,
HI
I have wimaxx usb stick I can not access to internet.softwire not responding .
please help me.
Thank youAccording to this page:
http://www.clear.com/support/download/usb/wimax-2-usb-adapter
There is a beta driver for Lion. Beta means a guinea pig application, where you are the guinea pig. So if it doesn't work, you should report to them what's wrong. -
How to connect N810 with LG KG800
Hi,
I'm trying to access internet through my LG KG800 (Chocolate)and N810 (internet tablet) it keeps restarting (mobile) again and agian. I am with orange and get internet on phone. I use to use internet on my N95 but I dont have n95 anymore so bought this N810 yesterday and now I cant access internet!!!!! can anyone help please????? any suggestions, recommendations are warmally welcomed.
Regards
Nobody1
Message Edited by nobody1 on 13-May-2008 01:38 PMIf you are in the US I had a similar problem, all the US phones connect to 3G by default no configuration needed, but N9 was a bit different. I ma on T-Mobile US, got my N9 went to store, acquired a new Micro SIM, popped into my N9, couple of seconds later, it says T-mobile, can make calls, but wait what no 3G??
So heres what I did,
Go to Settings-->Internet Connection
Swipe on Internet Connection
Touch Connect to internet, click on T-Mobile web2go (maybe something else in your case), viola you have 3G now (mine says 3.5 not sure why)
Then touch/click Edit networks and make sure you mark your 3G internet connection as 'Automatic'
Hope this helps!! -
i am doing some lookup on wimax solutions. i have no past knowledge on it.
have a few questions which need some advice.
- is there any Cisco design guide or solution guide for wimax solution? i dont seem to find any.
- what is a home agent (HA) used for?
- what is a CSN and what is it used for?
thanks in advance.WiMAX
-
Restart while trying to upload anything using wimax modem
Hi, i've the same question. i used mac book pro last 4 months. but recently it takes restart often.
my macbook pro take restart often especially when i try to upload anything using my wimax modem.
what's the error??? what should i do???
plz let me know if there any solutions.Hi, i've the same question. i used mac book pro last 4 months. but recently it takes restart often.
my macbook pro take restart often especially when i try to upload anything using my wimax modem.
what's the error??? what should i do???
plz let me know if there any solutions. -
Windows Live messenger for N810
I am interesting to buy the nokia n810, but i don't know if i can download the windows live messenger for it or the windows live messenger is on it pre-installed.
The nokia n810 support it??? Help me please!! Sorry for the bad english.
Saskia Nokia N73 and now with my new Nokia 5800Check this website-http://www.nokia.com.au/A4630707
However, I think you can download a sis version for your phone from the internet. My N82 isn't listed but it works fine.
That's right people, I'm back. Where have I been? I have been getting a life, away from this electric madness.
Maybe you are looking for
-
Hi experts We trying to see query to the web, from query designer we are klicking to display query to web, but that open only balnk page. Also need a detail or step by step help link for WAD Please help me and get points Thanks in advance
-
Hello guys, Saturday I bought a Zen V Plus 2gb and I installed the software, loaded my Zen and tried to fill it with music. But suddenly (by about 800mb ~ 80 songs) my Zen froze. I used the reset button and tried to fill it again. My 80 songs were st
-
I just updated my iphone4 to iOS5.1 and now I cant use my 3g, everything on my cellular data's right but I cant activate my 3g anymore, can you help me please? thank you! i really need it
-
MR51 : add custom field in the alv list
Dear. I need to add a custom field in the alv layout of MR51. Do you know any exit in order to obtain this ? Thanks.
-
How to combine Row members in Create Composit Forms in Planning 9301
Hi All, I'm working on Hyperion System9 Planning 9.3.01. I have created two data forms for Actuals and Budget data. Wherein in Actuals form the actual data is pulled from the Oracle GL and I'm entering the budget data in my Budget Form. Now the quest