N82 Battery problem when using Micro SD card
My N82 normally will last a couple of days on full charge however when I have my microSD card inserted the battery life reduces to about 4 hours. It is a type 2 sandisk card, can anyone help with this?
padd wrote:
how do I tell if there is a program running? Is there a simple way to check what is running at anytime?Hi padd
Just hold down the Menu button to see if any applications running.
It might be an idea to upgrade the firmware with Nokia Software Updater as that version on your N82 is original one upon release, but if network branded device may be limited.
Happy to have helped forum in a small way with a Support Ratio = 37.0
Similar Messages
-
GPU panics when using 9600M GT card
Hi,
My MBP occasionally crashes (usually when playing a game). The way it happens is that the screen goes black, and the sound stutters for a couple of seconds, and then the machine reboots. The problem is that the screen stays black after reboot, and the only way I've found to fix this is to do a hard reboot.
When I get the mac up and running I get a crash report, which always mentions GPU panic (see the report further down).
The crashes only seem to occur when I'm using the dedicated GPU (9600M GT). When using the integrated card it doesn't happen. This issue also seem to have started after I upgraded to Mavericks, I don't think I had the issue before (at least not with the same frequency as now).
So I'm wondering if anyone know if there's something to be done about the crashes? Is it a known issue?
Regards,
Stian
Crash report:
Anonymous UUID:
50AA8558-F3EC-95CD-85D1-7E35C4196936
Mon Dec 29 18:22:44 2014
panic(cpu 0 caller 0xffffff7f8ccd9f7c): "GPU Panic: [<None>] 3 3 1f a8 61 0 0 3 : NVRM[1/2:0:0]: Read Error 0x00070000: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd4000000 0xffffff81212dd000 0x096380c1, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff810cd0b360 : 0xffffff800aa22f79
0xffffff810cd0b3e0 : 0xffffff7f8ccd9f7c
0xffffff810cd0b4b0 : 0xffffff7f8b489f1b
0xffffff810cd0b570 : 0xffffff7f8b55350a
0xffffff810cd0b5b0 : 0xffffff7f8b6d4b2e
0xffffff810cd0b600 : 0xffffff7f8b74ab4f
0xffffff810cd0b780 : 0xffffff7f8b746818
0xffffff810cd0b870 : 0xffffff7f8b52e66c
0xffffff810cd0b8f0 : 0xffffff7f8b460f03
0xffffff810cd0b9a0 : 0xffffff7f8b465fad
0xffffff810cd0ba60 : 0xffffff7f8b48e9ef
0xffffff810cd0bc60 : 0xffffff7f8b4905a1
0xffffff810cd0bd50 : 0xffffff7f8c40c7a0
0xffffff810cd0bdb0 : 0xffffff7f8c409522
0xffffff810cd0be40 : 0xffffff7f8c3f3f57
0xffffff810cd0be70 : 0xffffff7f8c3b12b7
0xffffff810cd0be90 : 0xffffff7f8c3b25ac
0xffffff810cd0bed0 : 0xffffff7f8c3af338
0xffffff810cd0bef0 : 0xffffff800aeb0a20
0xffffff810cd0bf30 : 0xffffff800aeaf4c2
0xffffff810cd0bf80 : 0xffffff800aeaf597
0xffffff810cd0bfb0 : 0xffffff800aad7607
Kernel Extensions in backtrace:
com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B1 FF32]@0xffffff7f8b43a000->0xffffff7f8b6a2fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f8b0bf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f8b42a000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f8b3e7000
com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56A 3A4AC]@0xffffff7f8b6ad000->0xffffff7f8b956fff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f8b43a000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f8b0bf000
com.apple.GeForceTesla(8.2.4)[B0074750-2FC6-3E26-BEA0-5AD5469686CF]@0xffffff7f8c 3a9000->0xffffff7f8c473fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f8b0bf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f8b42a000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f8b3e7000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f8b43a000
com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@0 xffffff7f8cccb000->0xffffff7f8ccdefff
dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7f8ccc3000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f8b37f000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f8b0bf000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f8b3e7000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7f8ccc6000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:
0x000000000a800000
Kernel text base: 0xffffff800aa00000
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 13897898215533
last loaded kext at 249245129719: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f8cde3000, size 65536)
last unloaded kext at 311013477028: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f8cde3000, size 57344)
loaded kexts:
com.Cycling74.driver.Soundflower 1.6.6
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AudioAUUC 1.60
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMuxControl 3.6.22
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.nvenet 2.0.21
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1The logic board will have to be replaced if you want to keep using the machine.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks
search google for "iphone remove picture from contact"
-
ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate
ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
TABLE NAME - EMP
Item Containing PRIMARY KEY - P2099_EMPNO
Primary key column - EMPNO
By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
2) Created a HTML region. Within this region add
text item P2099_FIND_EMPNO
Button GET_EMP to submit
Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
EXIST (SQL query returns at least one row)
select 'x'
from EMP
where EMPNO = :P2099_EMPNO
But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
Any ideas?
Thanks PeteHi Mike,
I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
Thanks Pete -
Problem when using About Operator in Contains Query
Hi,
I'm new to Oracle and this forums too. I have a problem when using about operator in contains query.
I create a table with some records and then create a context index on 'name' column.
CREATE TABLE my_items (
id NUMBER(10) NOT NULL,
name VARCHAR2(200) NOT NULL,
description VARCHAR2(4000) NOT NULL,
price NUMBER(7,2) NOT NULL
ALTER TABLE my_items ADD (
CONSTRAINT my_items_pk PRIMARY KEY (id)
CREATE SEQUENCE my_items_seq;
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Car', 'Car description', 1);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Train', 'Train description', 2);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Japan', 'Japan description', 3);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'China', 'China description', 4);
COMMIT;
EXEC ctx_ddl.create_preference('english_lexer','basic_lexer');
EXEC ctx_ddl.set_attribute('english_lexer','index_themes','yes');
EXEC ctx_ddl.set_attribute('english_lexer','theme_language','english');
CREATE INDEX my_items_name_idx ON my_items(name) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer english_lexer');
EXEC ctx_ddl.sync_index('my_items_name_idx');Then I perform contains query to retrieve record :
SELECT count(*) FROM my_items WHERE contains(name, 'Japan', 1) > 0;
COUNT(*)
1
SELECT count(*) FROM my_items WHERE contains(name, 'about(Japan)', 1) > 0;
COUNT(*)
1But the problem is when I using ABOUT operator like in Oracle's English Knowledge Base Category Hierarchy it return 0
SELECT count(*) FROM my_items WHERE contains(name, 'about(Asia)', 1) > 0;
COUNT(*)
0
SELECT count(*) FROM my_items WHERE contains(name, 'about(transportation)', 1) > 0;
COUNT(*)
0I can't figure out what 's wrong in my query or in my index.
Any help will be appreciated.
Thanks,
Hieu Nguyen
Edited by: user2944391 on Jul 10, 2009 3:25 AMHello (and welcome),
You'd be best asking this question in the Oracle Text forum, here:
Text
And by the way, it will help others to analyse if you put {noformat}{noformat} (lowercase code in curly brackets) before and after your code snippets.
Good luck! -
When using FireFox I often cannot view pictures in Hotmail emails, but I have no problem when using other browsers
Do you also have this issue if you temporarily switch to Private Browsing mode?
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Select: [X] "Always use private browsing mode"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/fix-login-issues-on-websites-requrie-passwords -
Coercion problem when using Shared Variable
I have a curious coercion problem when using Shared Variables. I want to share the state of a State Machine, which is an enum saved as a control (typedef) called TYPE State (see attached). I create a shared variable called State and define it as a Custom Control, using the just-mentioned typedef. So far, so good. I've attached three simple VIs -- the first one, Init State, simply wires a constant to the input of the Shared Variable to initialize it -- the wired constant is, of course, defined by the typedef. However, the Get State and Set State, meant to wire an indicator (for reading the state) or control (for setting it), develop coercion dots when wired into the Shared Variable. Why? How do I get rid of the dot? [I suppose I could abandon my typedef and custom control, but the beauty of typedefs and custom controls is that it "enforces" rules, lets you use enums for clarity, keeps the code "honest", etc. -- I'd hate to give that up just to get rid of a dot!].
On a related note, the code seems to work. This is much too simplistic to do anything, but if you open Set State and Get State, set the state to anything, run it (it immediately stops, of course), then run Get State, you'll see the chosen state appear in the indicator. So it does appear to work. The "error" (coercion dot) may, I suppose, be a "bug" in Labview because it can't figure out the mapping of the (very simple!) Custom Control, but if so, I hope it gets fixed quickly!
Bob Schor
Attachments:
Coercion Problem1.zip 38 KBHello Bob,
I am also seeing this behavior, I will escalate this question to our LabVIEW developers and post again here no later than next Tuesday, November 27th as National Instruments will be closed for the remainder of this week.
If this issue does turn into a product suggestion, I would suspect the workaround would to live with the coersion dot for the time being.
Enjoy the holiday
Regards,
Erik J.
Applications Engineer
National Instruments -
NLS support problems when using AL32UTF8 in dads.conf
Hello,
Following a post by Joel Kallman, in one of the forum threads, about the mandatory use of AL32UTF8 in dads.conf, when running HTML DB v2.0, I changed my PlsqlNLSLanguage parameter accordingly.
Prior to the change, I experienced some problems when using non-English characters some application items appeared as gibberish when contained non-English characters, and the LIKE operator didn't perform as expected. After the change, it all seems to work OK, but now I have a different problem.
All the non-English characters in my HTML page source code appears as gibberish. On screen, at run time, everything display correctly, but the source code seems to be corrupted. It is very difficult, and very annoying to debug the pages that way. Is there a way to enjoy both worlds Using AL32UTF8 in the dads.conf, as required, and still getting a coherent HTML source code, containing non-English characters?
Thanks,
Arie.Joel,
I use the following settings and they work fine for me:
Operating system:
LANG=de_DE
LANGVAR=de_DE.UTF-8
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
daust:oracle[o1020]> uname -a
Linux daust.opal-consulting.de 2.4.21-37.EL #1 Wed Sep 7 13:35:21 EDT 2005 i686 i686 i386 GNU/Linux
daust:oracle[o1020]> cat /etc/redhat-release
Red Hat Enterprise Linux ES release 3 (Taroon Update 6)
daust:oracle[o1020]>
marvel.conf:
<Location /pls/htmldb>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlDatabaseConnectString localhost:1521:o1020
PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDefaultPage htmldb
PlsqlDatabasePassword @BZvJYqadreElOqj5poCB5gE=
Allow from all
</Location>
Database:
daust:oracle[o1020]> sqlplus "/ as sysdba"
SQL> select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0####################
Using AL32UTF8 resulted in the same problem as described ( and fixed ) here: Re: Strange - HTML not written correctly
So, what is the proper configuration of the DAD, perhaps there are different ones for Unicode instances and non-Unicode instances.
~Dietmar. -
i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file? -
Performance problem when using CAPS LOCK piano input
Dear reader,
I'm very new to Logic and am running into a performance problem when using the CAPS LOCK-piano-keyboard for input of an instrument: when I'm not recording everything is fine and the program instantly responds on my keystrokes, but as soon as I go into record-mode there is sometimes a delay in the response-time (so I press a key and it takes up to half a second longer before the note is actually played).
Is there anything to do about this to improve performance (for example turning of certain features of the application), or should I never use the CAPS LOCK keyboard anyway and go straight for an external MIDI-keyboard?
Thanks and regards,
Tim MetzDoes your project have Audio tracks and just how heavy it is, how many tracks? Also, what kind of Software Instrument do you use?
-
We use IE9.
I enter in https://gwserver.
Compose New mail (in Plain Text mode) with body:
Line-1
Line-2
Line-3
And send this mail , for example to itself.
the received letter will look like:
Line-1Line-2Line-3
Someone has the same problem?
SergAre you guys still on the shipping code of GW 12? Novell had a fix for this within a couple weeks of GW 12 being released from what I remember. Open an SR and get the latest code.
Or simply tell your users to user HTML.
Todd Bowman
Todd Bowman
Senior Network Analyst
University of Minnesota Physicians
612-884-0744
[email protected]
>>>
From: MarkDissington<[email protected]>
To:novell.support.groupwise.2012.web-access
Date: 5/24/2012 6:46 AM
Subject: Re: Problem when using IE9
skoltogyan;2197344 Wrote:
> The solution is?
>
> Serg
I would guess don't use IE9 until a fix is released? :-)
M.
MarkDissington
MarkDissington's Profile: http://forums.novell.com/member.php?userid=27611
View this thread: http://forums.novell.com/showthread.php?t=455634 -
Problem when using Javabeans in ADF?
Hi,
I encountered a problem when using ADF.
Please look at the following 2 classes :
public class Person
private String name;
private String city;
private int age;
public Person(String name, int age, String city)
this.name = name;
this.age = age;
this.city = city;
public Person()
public void setName(String name)
this.name = name;
public String getName()
return name;
public void setAge(int age)
this.age = age;
public int getAge()
return age;
public void setCity(String city)
this.city = city;
public String getCity()
return city;
public class PersonFactory
public PersonFactory()
public List getPersons()
List list = new ArrayList();
list.add(new Person("peit", 18, "dalian"));
list.add(new Person("robin", 22, "shenyang"));
list.add(new Person("Joe", 30, "York"));
list.add(new Person("Edi", 23, "Beijing"));
return list;
public List getNames()
List list = new ArrayList();
list.add("Peit");
list.add("Robin");
list.add("Joe");
list.add("Edi");
return list;
public void commit()
System.out.println("Data commited");
I created the PersonFactory class as DataControl, so I can use the getPersons() and getNames()(just for test, so they are simple), I drag the names from
the DataControl palette as Table in a JClientPanel, good luck, it works and displays the 4 Strings in a table, but when I drag the persons from
the DataControl palette as Table in the same JClientPanel, it does not work and raises exception :
java.lang.NullPointerException
at javax.swing.JTable.prepareRenderer(JTable.java:3731)
at javax.swing.plaf.basic.BasicTableUI.paintCell(BasicTableUI.java:1149)
at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1051)
at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:974)
So, I confused why? How to edit it properly?
Thanks.
Message was edited by:
[email protected]Hi, Frank
Thank you for your reply.
I am sorry for not explaining well. I mean that the getNames() works fine, but getPersons() does not. The only diferenece between them is the former is simple string and the latter is javabean, but when I made the PersonFactory as DataControl, I set the bean class Person for the getPersons()(list of persons) bean class.
I debuged the class, the exceptions raised when the table for getPersons() setModel() method called.
So, where is the problem?
Thanks. -
Cannot email pdf using Acrobat Reader XI v11.0.3 in Windows 8. No problem when using in ms vista. get "authentication error". Sometimes will get a very quick dialogue box showing the gmail login screen but then disappears. I use firefox and IE
Hi Rodney
Welcome to Apple Discussions
This sounds like one of those "oddities", contributed to by a few sources.
I can clear the Safari cache files as a temporary solution, but I encounter the same difficulties with the “problematic” files once they have been opened again.
Wondering if you disabled the Safari Cache would the refresh function work correctly? As a test you can disable the Safari Cache by Emptying the Cache first via the Safari menu, then Quit Safari. Now go to the Finder>Your User Library>Caches>Safari. Single click on the Safari folder, then Apple Key + I to open Info panel. There, check the "locked" box. This prevents further additions to the cache. The downside, you lose your ability to upload images etc. within Safari (my cache is disabled, so I use Firefox for the uploads).
Then restart Safari. Try the PDF from within Safari.
Post back -
Avoiding battery overheating when using MBP in the sun
Are there any ways to keep a MBP battery cool when using it outside in the sun? Or should I just not worry about it?
Today I was sat on my balcony enjoying the Mediterranean sun using my 2014 MBP when Coconut Battery popped up with a notification warning me that my battery was beginning to overheat and that damage could result. It was reporting a temperature of 35.5 C.
So I opened up Macs Fan Control and switched from monitoring the CPU temperature to monitoring the battery temperature. However I get wildly different readings from the 3 battery sensors that MFC monitors compared with Coconut - sometimes the former shows more than the latter, other times the opposite. The hottest either of them registered was 38 C. I tried cooling it by setting MFC to max the fans out when the battery sensor read over 35 C but I'm not sure it made much difference - and having looked at MBP teardowns I know the battery is nowhere near the CPU fan.
I'll be wanting to use my MBP outside more as we move into the heat of summer but I want to avoid battery damage. There's loads of stuff online about MBP CPUs getting hot - something which I think is a silly non-issue - but batteries are definitely more vulnerable to heat than silicon. Any tips anyone?Thanks, I'm familiar with Battery University. I read a lot of their stuff in some detail a while back when it was quite out of date - I see they've just updated that article so I need to reread it more thoroughly but the only metrics I can see about temperature on that particular page are about battery storage:
"A battery dwelling above 30°C (86°F) is considered elevated temperature and for most Li-ion, a voltage above 4.10V/cell is deemed as high voltage. Exposing the battery to high temperature and dwelling in a full state-of-charge for an extended time can be more stressful than cycling."
It doesn't seem to say anything about the a battery becoming damaged by occasionally heating itself to the mid-high 30s C for relatively short periods as a result of normal use in slightly warmer ambient temperatures.
I've since had more Coconut battery warnings for similar temperatures while using the MBP indoors on my lap at room temperature, and others while the MBP was on a table charging and running some background tasks. As I write this sat in my bedroom the battery is reading 33 C - just 2 C away from the threshhold when the warnings start. This is all well within normal use and should be designed into the unit's normal operating temperatures so I'm not going to give much credence to Coconut Battery's warnings now I don't think. -
I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.
Maybe you are looking for
-
Output not getting displayed in Forms
Hi, I have created a sample VC application using BAPI_BANK_GETDETAIL BAPI. I am passing bank key and bank Country as inputs to the Bapi using the input form and this bapi returns Bank Details and Address Details. I am trying to display the address d
-
Sender business service?
Hi Friends, I have sap to sap integration requirement.Sender is company's sap system and receiver is legacy(vendor's)sap system.I am required to configure business service(instead of business system)at the sender side. 1.Can anyone help me with the s
-
I have just purchased an iMac for home - am I able to network an iMac with a windows laptop?
I have just purchased an iMac for home - am I able to network an iMac with a windows laptop?
-
Integration Kit for SAP - Open SQL access to tables. List incomplete.
After we install the BO integration kit for SAP and CR 2008 we were able to connect to SAP and open SAP Data Dictionnary tables (Open SQL access). I have a problem however: when I display the list of available tables, the is not showing all the table
-
How to Assign Person (Personnel Number) without work Center
Dear All, How to setup personnel number in order not using general and internal work center in operation service order area? if i use work center, it make HRD site and payroll will be damage please help me if you have any solution? Thanks Rendra Rizk