N82 camera problem: black image and flashing blitz...

Hello, today my n82 phone crashed with this issue, i reinstalled the firmwire reseted it and the problem wasn't solved, u know if i can resolve the problem myself or i really must go to guaranty?

If you have dropped your N82 this issue is most likely hardware related necessitating a visit to a Nokia Care facility unfortunately.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

HT1454 HELP! ITook loads of photos on my ipod touch, and when i went to look at them they were just black images , and then out of 50 bout 7 of them came out?anyone know how to get the black pictures turn out ?

HELP! ITook loads of photos on my ipod touch, and when i went to look at them they were just black images , and then out of 50 bout 7 of them came out?anyone know how to get the black pictures turn out ?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup

Problem with dreamweaver and Flash

Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....

This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie.

HP G62 US-340, Black screen and flashing caps lock

HP G62 US-340, Black screen and flashing caps lock when i power it on, And some time it comes on like it should. I tried draining all power from unit to reset and that wasn't any help. Can you help me Please ?
This question was solved.
View Solution.

Hi @mikeyh25
Thank you for your query, I will do my best to help!
I understand that when you start up your notebook you get a black display with no error messages,but you see the Caps Lock light flashing.
Here is a link to assist you. Computer does not start and the LEDs blink or the computer beeps.
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Z10 Camera Issues - Black image, no pics

During use of the rear camera on my Z10, the live image started to show streaks of lines in blue, green, or red, with the rest of the image being a shade of one of those colors. The pictures taken would look like these distorted images. I restarted the device and also pulled the battery. Initially no help, though after another restart, the live image now shows black, as if the camera has a lens cap over it. When trying to take a pic (even though a black image), it clicks as if it’s taking pic, but nothing is being saved. I’ve swapped options between saving to device and SD card (and removing the card), no change. So at this point, black image on live view and no pics recorded/saved when taken. Front camera seems ok. Any thoughts?

might be a bad camera, you could back it up and wipe it to prove that it is not the OS
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

My mac Mini has problem rendering images and video

THE PROBLEM:
My mac mini has problem rendering JPEG image. There are strips on the images. Other images such as GIF, PNG, TIFF, and BMP are displayed nicely.
The images shown in the links below illustrate the problem:
http://www.flickr.com/photos/terencewong/71481156/
http://www.flickr.com/photos/terencewong/73360989/
(Please note that this image is grabbed from my faulty Mac Mini and saved into TIFF. For uploading purpose, I converted it into JPEG on ANOTHER computer.)
For movies, AVI can be playback without problem. But when it is converted to MPEG, it looks like an untunned TV channel.
FIXES TRIED:
I did erase and install 3 to 4 times using both the install disc and my Tiger Family Pack. All ended up with strips on the JPEG images and the generated MPEG movies.
I've also tried to flash the firmware to 113-xxxxx-124 using ATI's october 2005 universal ROM update, however, the ROM Revision shown in System Profiler is still 113-xxxxx-116 no matter how many time I reboot the system.
INVESTIGATION:
Yesterday, I did some research and got to know that JPEG and MPEG are using DCT (Discrete Cosine Transform) for decompression. And the ATI Radeon 9200 chip provide such a transform on hardware basis, which free the CPU from doing something else. Feel free to point out my inaccuracy.
HARDWARE SPECIFICATION:
I bought the Mac Mini in the last Februray.
The system Boot ROM version is: 4.8.9f1
Display card is ATI Radeon 9200
Chipset Model: ATY,RV280
Revision ID: 0x0001
ROM Revision: 113-xxxxx-116
A POSSIBLE CONCLUSION:
I suspect that it is this part of the chip (the DCT) that is faulty.
Anyone know how to fix this problem?
Many thanks!

Assuming that your display is tightly connected, thus the problem is not caused by something as simple as that, the fact that a full erase and install has not removed the problem would, I think, point to this being a hardware issue, and given that everyone's mini (with the possible exception of some of the latest ones) has the same video chipset as yours, and do not suffer the problem that you appear to, it seems very likely that your mini has a fault which is in need of repair.
If you have an Apple Store nearby, I would take it there to have it checked out - at the very least they should be able to replicate your problem using an in-store display, and if not, thusly suggest it's something external to the mini and concerning your display or something very unusual in the immediate environment of the mini. If you don't have an Apple Store in reach, I'd take the system to an Apple authorized service provider since at the present time it is under warranty.

How can i use PCIe 1433 and basler line camera to construct image and pocess it?

hello! every one ,I am new to machine vision.i have two problems to ask.First,how can i use line camera and 1433 to acquire 2-D image?second,if i want to pocess the 1-D signal ,how can i do it ?i expect for your answer ,thank you!

What you are trying to do is not something you can easily do in a forum, but I can give you the basics.
You have a CameraLink frame Grabber (PCIe 1433) and a LineScan Camera
The framegrabber needs to be configured to understand how to communicate with the camera. You need a file from the camera vendor. This file might already be installed. You can use MAX to check if it is, under Devices/IMAQ.
Assuming you can get to the point where you can communicate with the camera, you need to configure your acquisition.
Since the camera is a line scan camera, it captures image data one pixel ine at a time. You will need to configure the frame grabber to determine how many lines per image you want. The low limit is usually 1, and the high limit is either based on the framegrabber's internal memory, or that of the computer.
If you are using labview, you will need to open a sessing to the camera, acquire the image(s), and then close the session when you are done.
Once the image(s) are captured, you can performa analysis using the NI Vision Toolkit.
Sorry, but there is no way to condense years into one post.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

Built in camera shows black image

Intel iMac - camera shows black
Photo booth is working, but camera shows a completely black image.
When I click the "camera", it goes through the motions of taking a picture and saves the picture, but the picture is of course completely black.
I tried rebooting, no change.
I tried in Comic Life, still black image.
Nothing is covering the camera lens.

Repair permissions & your disk from your Tiger DVD. See if that helps any. If not, then suggest that you re-post over in the iSight Forums where the iSight users hang out.
Also, since you have an Intel iMac, cross-post over in the the Intel-based iMac Forums where users there have the same model iMac as yourself.
This area is for G5 iMac issues.

Screen problems - black screen and lock-up (plus HDMI issues)

Hi, I'm not sure if these are related to the same fundamental issue, but they are both serious problems that need resolution.
I have a new mid-2012 MBPretina. I am on all the latest updates (10.8.2).
The first problem is the most recent, and the most serious problem. Since I updated the Java a couple of days ago I've been experiencing random black screens and lock-ups. Essentially, what happens is that sometimes when I perform an action (opening an app, clicking a link on a webpage, performing other kinds of in-app actions, etc.) the computer screen will go black. About half the time I can, through my own memory, try keyboard combinations to quit or force quit the most recently used app (the one where the action was just performed), and I will get some glimpse of the underlying apps, while the menubar and other areas will remain black until I move a window on top of the black space. Sometimes no key combinations work and I am forced to perform a hard restart with the power button. This is a serious issue, obviously, since I will lose current work/progress in my apps. I'm not sure if this is because of the new Java update, or has to do with something else, but it started happening shortly thereafter, over the last 2 days. I work most of my waking day on my laptop, and this "black screen of death" has happened about 5 or 6 times a day.
The second problem I have been experiencing since I starting using my MBPr with external HDMI displays in August/September. The problem is that I will plug the MBPr into an HDMI display, the screen will temporaliy go black, and then bring me to the login screen (as if it's crashing, albeit softly). This happens about 1 out of 4 times nowadays.
How can I fix these problems, especially the first?

UPDATE:
Clearly there's a problem because a third of the way through a clean reinstallation from scratch it black screened again. Hmmmm.
Now this is not good. Problem is I can't rule out potential updates from Apple that might have caused this either.
The search for solutions continues.

Problem with images and text displaying correctly

I don't really know how to explain this problem and I had two screenshots ready to upload to show the before and after but we apparently can't upload photos now...SOOOO I will try my best.
The issue began when I got a new computer at work (Windows 7 instead the Windows XP everyone else has) and was/is present for me in InDesign CS2 and since we were planning on updating to CS5, I figured that having an updated version would fix whatever issue it was. That was a wrong assumption unfortunately.
When I open any document, all images and text are displayed properly until I scroll up/down or side-to-side and NOT using the scroll wheel for up/down. This is probably so confusing and I'm sorry I can't describe it better...the mouse I use has two programmable buttons that I set to coast up and down and to go side-to-side I can push the scroll wheel to one side or the other and it coasts that direction. When I do either of those things, the text looks like it is permanently greeked and the images look....weird lol like they are in 16 bit or something like that. To fix the problem in CS2, I have to click and hold on a text block until I am able to adjust text so that I can see it adjust in real-time. In CS5, I have to do the same basic thing except I don't have to click and hold as it does that by default (awesome feature btw!!)
I have already updated my graphics card driver (Nvidia 9400 GT 1GB) and my processor driver (Intel Core2Duo 3.0ghz) and I have 4GB of RAM. I tried updating both CS2 and CS5 but both are updated already. I've also tried doing the whole inx. export and cleaning the preferences file or whatever that is called. Nada. If someone thinks they can help me, I can send them the two images I was going to upload here. Email me at justgeig (at) gmail (dot) com Thanks in advance!

maybe greeked isn't the right word...i don't know how to explain it
here is the correct view. It is much more noticable when the whole document shows this.

OS X 10.8 Problems with images and layout when printing to PDF from any web browser

Hi there, I just bought a new macbook air and running OS X 10.8. This problem happens in both Safari or Chrome: When I go to print to a PDF file, the website suddenly drops most images and formatting, ending up in a very old-fashioned layout. Is this something new with OS X 10.8, or any other suggestions as to what I can do?
BEFORE:
WHILE PRINTING:

NewOSX10.8 User wrote:
No difference. I have discovered that it is probably the websit (weird) that is mainly at fault, as I tried the same thing on 2 other machines and the same thing happens to a varying degree on this website, and a lesser degree on other sites. Thanks for your help, it may not be OS X 10.8 at the root of the problem.
Yes if it prints to a printer in the same manner, and it occurs regardless of browser it is the website.

Big Problem: Missing Images and Duplicated Images

I had thought that this was some kind of web gallery problem, but now it's clear that this affects all of Aperture (on my system).
If I select a few images (in this case from a smart album), and then create a new:
* web gallery
* album
* etc
...from that selection, the new gallery, album or whatever appears, but withOUT the images in the browswer! Oddly, the album does show that the appropriate NUMBER of images are in that album (from the panel on the far left). In other words, an album is created, a number of images are listed as being IN that album, but the images aren't showing up in the album, at all.
Further, the images actually become DUPLICATED in the smart album that was the source.
Here is the strange bit: If I select a large number of images from that smart album, some of the images DO appear in the NEW album or gallery or whatever. But many DON'T. And all images are duplicated in the source album.
I've restarted the Mac, rebuilt the Aperture database. Problem persists.
Anyone have any idea what's going on? Do You have this problem?
rick

I have seen a similar problem when creating a smart album. I have also had a similar problem with images disappearing. See this thread:
http://discussions.apple.com/thread.jspa?threadID=301318&tstart=30
I still have not found a solution and the Apple techs are no help.

FCP7 export problems - black frames and text irregularities

I'm on FCP 7.0.3 and have recently started editing stuff from my new Panasonic HDC-HS900.
I started a small project just to get to grips with the new workflow and realised that I had made the mistake of trying to import .mts files. However, I found a plugin from Panasonic's website which allows this but editing with the imported files is a nightmare because FCP starts running so slowly that it is impossible to make any kind of precise edits - the scrubber bar jumps all over the place and moving it forward one frame with the arrow keys takes about three seconds.
So, I realised my mistake and having discovered that using ClipWrap circumvents all these problems, I devised a new workflow and resolved to stick to it.
The only problem is that I showed the test edit to my girlfriend and her parents and despite it being full of bad stuff (I mean very rough edits caused by the slowness and audio problems that I couldn't be bothered sorting out also because the process was so frustratingly slow), they all liked it. So, whilst I would like to consign this experimental disaster to the bin, I need to at least iron out some of the problems so that I can give my girlfriend a copy which does not look quite so awful.
So, after labouring through this excruciatingly slow process, I try to export the finished thing only to find that the opening ten seconds, where I have used a slow motion sequence (which, ironically, is not an .mts file - it's a 10s .mov file I exported from FCP in order to convert it from 50p to 25p slow motion without losing frames) and a bit of text which dissolves in and out, there are a few single black frames and the text disappears momentarily several times.
Everything else is fine (apart from the awful edits!).
Having now left FCP to render the whole sequence, I managed to inspect it frame by fram much quicker and on the timeline it looks exactly as it should - the edit itself couldn't be much simpler; two layers - one text, one .mov file. dissolve the text in for one second, two seconds later dissolve in the .mov then a virtual reverse process. What could possibly go wrong?
Anyway, I have deleted all the render files and I am currently waiting for the sequence to re-render - estimated time: two hours.
All I want to do is wrap this junk up so that I can start a proper project.

I'll have to respond in an unordered fashion, just to try to make sense in my reply.
I was using ProRes 422 HQ because I found three options in ClipWrap and had to make a quick decision based on two minutes research and having found by trying it that 422 HQ files were only about 25% bigger than 422 files, I figured I had nothing to lose - especially as the workflow I WILL BE employing does not require permanent storage of the files and I now have 1TB external space for media archive storage and over 600GB internal space for ongoing projects. I might as well use the highest quality.
The reason I suspected the rendering files is that they were being used by FCP in the export of the project - evident in the fact that it takes almost three hours to save an unrendered sequence vs about six minutes to export a rendered sequence. Therefore, being unaware of the inherant problem you mention, I think it was reasonable to guess that a forced re-rendering might have sorted it out.
Yes, with 20/20 hindsight, it might have been quicker but, again being unaware of the issue you mention - which I shall have to look into - it seemed like a small problem which ought to have a had a simple answer. But now I know better.
I have, incidentally, discovered that all the dissolves I inserted have very similar problems.
And, to answer your first point last, I have already gone down that path - I'm just waiting for the results.
Could you perhaps point me at some article where I can read about the inherant problems of H.264, please?

Firefox has constant black highlights and flashing areas everywhere

Every time a page starts to load, everything that can be highlighted, turns black and flashes. I hate it, I want 3.6 back.
Along with the pages never wanting to scroll.

#Go to [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.17] and download it to the desktop. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box). 
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

Problem with IE8 and Flash on LL Bean website

My desktop machine is running XP SP3 with all updates and the latest Flash Player. When visiting the LL Bean online catalog you view the products which have small pictures associated with them. If you click on a picture a larger window opens up with zoom controls etc which gives you a much better idea of what the product looks like. This works perfectly with my laptop running the same software setup as well as my work computers. With my desktop the image loading progress bar runs to the end of the bar and then just sits there. It doesn't hang IE8 or anything...it just sits and does nothing. I can close the window and go back to browsing the catalog with no problem until I try to view another larger image where it does the same thing.
So far I have not run into any issues with any of the other websites I have visited.
I am hoping the experts here can help me resolve this problem. I have uninstalled and reinstalled flash 3-4 times. I have read several articles on google but none quite like what I'm experiencing...I have run into a brick wall.
Any help tearing the wall down will be much appreciated.

It do happen with IE many times. Few flash files works exactly in other browsers but in IE they dont. Try to update the IE latest software or patches from microsoft website.
Sai.
My Website - Placement Papers, Interview Questions, Job Openings, Prepaid Mobile Recharge Online, ITClerk

N82 camera problem: black image and flashing blitz...

Similar Messages

Maybe you are looking for