N82 connect to Exchange Email

Hi
Is there any way of picking up email from Microsoft Exchange on the N82?
Thanks
Mike

Yes, you need to install mail for exchange (MfE). You should find a link to it in the phones "Download!" menu or get it from www.nokiaforbusiness.com

Similar Messages

  • Outlook 2013 asks for credentials but does not connect for Exchange email, but only when out of office

    Hi,
    New employee wishes to use his Office 365. Have loaded onto new PC, connected to exchange, loaded his folders, everything is fine.
    When he leaves the office and connects at home, he is asked for credentials.
    I have tried the usual credentials: [email protected] and domain\user
    With each attempt, Outlook displays disconnected
    The password is correct, OWA he can log on fine, he has no problem when returning to the office. He has all the correct permissions in AD.
    No other user has a problem when away from the office, but every other user is using Office 2010
    Advice appreciated.

    Hi,
    Please make sure the user has enable Outlook Anywhere in Outlook.
    To turn on Outlook Anywhere, on the Connection tab, under
    Outlook Anywhere, check Connect to Microsoft Exchange using HTTP, and then click
    Exchange Proxy Settings. Your Exchange admin must enable this feature and provide you the proxy settings. For more information, please refer:
    http://office.microsoft.com/en-in/outlook-help/use-outlook-anywhere-to-connect-to-your-exchange-server-without-a-vpn-HP010355551.aspx
    Best Regards,
    Steve Fan
    TechNet Community Support

  • FRG01B - cannot connect to Exchange email

    Hi
    My Droid just prompted me with the OTA update and after installing it, I cannot seem to connect to the corporate exchange email server. I have tried reseting the device, removing the account and adding it back on - but every time it comes back with error "unable to open connection to server".
    I was using this email account without any problems till this update.
    I've also tried accepting the certificate using OWA and then tried configuring Exchange as normal to no avail. Any help appreciated.
    Thanks,
    --Tom

    I sent the IT guys both PDF files recommended by Verizon and Motorola support.  They made the changes to the exchange server.  It did not fix the problem.
    I now have 3 phones that have been updated to 2.2 that have broken exchange email.  Touchdown is the only thing that is working, but I don't want to spend another $20 to fix something that Verizon and Motorola BROKE.

  • IPad Air 2 won't connect to exchange emails

    Hello, I've recently purchased an iPad Air 2 WiFi model. Everything transferred from my iCloud backup from my iPad mini except for 2 of my exchange email addresses I use for work. The emails work everywhere, in my iMac and iPhone 6. I've tried deleted the accounts and setup from scratch, and it looks like it sets up successfully but when I go to the mail app, it shows the inbox but nothing else comes in.
    Is anyone else experiencing this issue?

    Hi Ya'll,
    I finally worked out why we don't receive Webmail.
    Webmail is restricted to a maximun of 10 partnerships with mobile appliances. Hence, just because you change iPads/iPhones etc., it does not automatically delete these on its server. So if you upgrade  from an iPhone 5s to a iPhone6 or an Air 1 to an Air 2, that does not automatically delete the old appliance.
    So here is the message that I got from Webmail:
    You have 10 phone partnerships out of the maximum allowed 10 partnerships. After you reach the maximum, you can't create additional partnerships until you delete existing ones from your account. To do so, sign in to Outlook Web App, click Options > Phone > Mobile Phones, and delete any unused partnerships.
    If you follow these steps, it should all work just fine.
    thanks,
    Gunaroo

  • Can't connect to Exchange Email  via Verizon 3G but can on wireless...

    For some reason I can connect fine to our exchange server if I have the wireless enabled but I get 'Cannot get mail, connection failed' when I have the wireless turned off and am using the verizon 3G network only.  I have 4 bars of signal, too.  Anyone else have this problem?  Is their something about the verizon network that won't support MS Exchange connections?
    {edited for privacy}

    I can't help with your issue since I am no expert at Exchange, but I can confirm that mine works just fine on the network.

  • Connect Exchange email without active sync just as I do on Mac mail on Mac book.  Using OWA site.

    I am trying to connect my exchange email to my iPhone without using active sync. I am able to connect it to the Mac mail program on my MacBook pro with out ay issues. Can this be done on the iPhone?  Please instruct.

    Hi,
    I have a similar issue, just purchased Iphone4, can't get my enterprise emails because i get the typical "Unable to verify" message. My It guys (which are totally unfamiliar with Iphone because we are a blackberry-organisation ) tried to create an acoount on my iphone with no succes, afterwards they said that our email application is not compatible with iphone and that "we will upgrade it but don't know when".
    After googeling (without understanding much ) i found that:
    Active Sync is needed for Iphone to get emails, Active Sync works only with Microsoft Exchange SP2.
    We have Microsoft Exchange 2003 RTM (6.5.6944.3) so no SP1, no SP2.
    Is this the issue why we can't get it work?  If yes, is there any other way to get my emails without this ActiveSync?
    (we have OWA in case this is usefull).
    Thanks a lot!

  • HT2480 Ipad mini - exchange email stopped working randomly  Error: "Cannot get mail. The connection to the server failed."

    I got an iPad mini over Christmas and have had no issues setting up/managing my email until yesterday. I've had my Exchange email working for almost a month, and yesterday I stopped getting emails and getting the error: "Cannot Get Mail. The connection to the server failed."
    I tried resetting the device (multiple times) and deleting and recreating the Exchange account (multiple times). This is getting annoying because it worked fine up until yesterday. I'm not aware of any updates to the device, or any changes that have occurred since yesterday.

    Due to a screen issue, I had my iPhone 5 replaced two days ago. I repeated deleted the mail account and kept adding it but this did not make any difference. When I attempted to setup the new phone with my Google (Gmail via exchange active sync) accounts I was receiving this same "Cannot Get Mail" error. From what I was able to gather, this problem should be affecting Gmail accounts set up via Exchange. When originally purchasing the phone I was assisted and directed to set up my Gmail account through Exchange because it had the ability to use "ActiveSync" and push not only mail and calendars, but all of my contacts as well. I found this article regarding the subject.
    http://www.pcmag.com/article2/0,2817,2413283,00.asp
    What it came down to was having to delete my Gmail via Exchange account and separate it into two different accounts, a regular gmail account for my mail and a CardDAV account for my contacts.
    Here is what I did. Google is changing their system and for new registrars Exchange ActiveSync will not work so you will be unable to register your account via Exchange and have your mail, calenders, and contacts all pushed together. I find this change really annoying. If you are having problems accessing your contacts after deleting the mail account, like I was, here is the work around.
    To circumvent this issue go to Setting > Mail, Contacts, Calendars > Add Account > Other > Add CardDAV Account: Under server ender google.com, then your email user name and password, then click next to verify the information.
    I hope this helps.

  • Droid Ultra, help with setting up exchange email? I have all the correct information, but wont connect.

    Help please!!! I have been having trouble trying to set up a corp exchange email for someone on his Droid Ultra, the domain\username is correct the server name is correct, but I still cant connect. Is there something I'm missing. I am a novice to Droid phones.

    Usually they ask for your credit card security code (the 3 or 4-digit code on the back or front of your card). Can you check the wording carefully and see if that's what they're asking for? Try putting it in and see what happens.
    Matt

  • My iphone 4s cannot connect to my work exchange email

    I got a new/referbished phone yesterday and cannot connect my work email to my phone. This needs to happen! I have soo much work emails and calendar reminders on Exchange!   HELP!!!!!

    I suggest making contact with your IT department at work. It is very possible they have MAC filtering on, or there are other settings in the Exchange environment that would prevent connecting a new device to the Exchange server. They should be able to sort that out for you. You do not describe any errors that you see when trying to connect.

  • Help? New iPad2 exchange email was working. Now won't download email and existing emails disappearing - newest disappearing first.  Can connect to web. And my windows computer connects fine to exchange server.  What's going on?

    Help? New iPad2 exchange email was working. Now won't download email and existing emails disappearing - newest disappearing first.  Can connect to web. And my windows computer connects fine to exchange server.  What's going on?

    Actually all are affected, but i manage to solved it running Virtual test version to trace the issue and finally able to fix it. Thanks for asking.
    IT Technician

  • How other email server (sendmail) will make connection to Exchange 2010 mutli role server.

    Hi,
    We have 2 Exchange 2010 multi role server and one load balancer for Cas array.
    Now we do understand that DAG will be using for database and CAS can be in HA mode via Load balancer.
    Now question is, we do have other non-microsoft email server with same smtp address so when this sendmail server will try to make connection to exchange 2010, which server name/ip we need to give them.
    Will it be DAG ip/name or do we need to give both server IP.
    Amit Rawat | MCITP - Exchange 2007/2010| CCNA |MCSE- 2003| Lync 2010|http://blog.amitrawat.net

    you can use whatever Ip's are listening on port 25 on the 2010 hub transports. 
    If your load balancer is listening on port 25 and balancing that (probably only a https loadbalancer?) you can use that ip.
    If not you can put your 2 cas server IP's in the smart host connector from the sendmail box.
    It certainly wont be the DAG ip as the mailbox role has nothing to do with the hub transport.
    Foremost i don't have separate CAS here, I do have 2 Exchange(cas/HT/MBX) and DAG is configured.
    when sendmail send email to Exchange i need to use some common smtp address to point these servers, so that if one goes down sendmail server can still make connection via that common name.
    i can not put two name space(since these 2 exchange are HT server as well) for sendmail server. Any suggestion .
    Amit Rawat | MCITP - Exchange 2007/2010| CCNA |MCSE- 2003| Lync 2010|http://blog.amitrawat.net

  • HT4847 Can I temporarily turn off iCloud backups. From time to time I'm limited to dialup internet service. iCloud's taking over the connection, preventing simple eMail exchanges.

    Can I temporarily turn off iCloud backups. From time to time I'm limited to dialup internet service. iCloud's taking over the connection, preventing simple eMail exchanges.

    When you switch to iTunes backups, the device will start to make any further backups to iTunes on your computer. It will only do this when it is connected to iTunes and a power source. (If it is set to sync/backup wirelessly, it will only do so when it is connected to a Wi-Fi network)
    When you switch back to iCloud backups, it will basically resume where it left off and start to back up once again to iCloud. There is no moving of backup files between iTunes and the cloud when you switch between backup options.

  • Exchange Emails over WiFi

    For the last 3 days or so, I'm not able to get my exchange emails over wifi on my mac and iPhone 5 (mail app). The home wifi is working just fine as i'm able to connect and get all the other mails from gmail and hotmail but when it comes to my exchange account, I get an error 'can't connect due to network error'.
    Although, I'm able to get my exchange emails over cellular data connection both on my mac and iPhone. Please suggest.

    Hi Razmee,
    Thanks for the reply. I've tried that but my IT guys are a nocturnal bunch of grumps. It's not officially a work appliance, therefore not officially their problem. The fact I spend my own dollars to improve my efficiency and contactability is lost on them.
    Cheers

  • On Windows 2012 Terminal Server Outlook fails to connect to Exchange 2013

    I have a new install of Windows 2012.  I have two physical servers.  One is a W2012 std Domain Controller ("DC").  The Second is configured as W2012 HyperV  ("HV").  Under HV I have
    two VMs.  One VM is W2012/Exchange 2013 ("ExchVM) and the other is W2012/Terminal Server ("VMTS").  All systems are behind a firewall appliance.  Exchange is working via Outlook and OWA internally and externally.  The self
    created SSL must be installed manually on external machines since it comes up as an untrusted certificate.  Once installed remote outlook works and OWA works.  I have configured the terminal server and I am able
    to login remotely as various users under my "TS group".  The problem is when ever I attempt to open Outlook for the 1st time, it fails to connect to the exchange server.   (Open Outlook 2013, click next
    on the splash screen, "Yes" Add an Email Account splash screen, click next, Auto Account screen populates NAME and Email Address correctly, click next, Searching for mail server settings..., check on establishing network connection, check on searching
    for alias@ domain, then fails the logging on to the mail server)  The error reads:  "Outlook cannot log on.  Verify you are connected to the network and are using the proper server and mailbox name.  The
    connection to Microsoft Exchange is unavailable.  Outlook must be online or connected to complete this action."   I am connected in RDS from offsite, and from the RD session I can access shared folders on ExchVM and DC.  I have
    tried have verified the server Exchange server name is correct via "Get=ClientAccessServer" command.  I have also tried to use the guid via "Get-Mailbox
    ALIAS | fl name, exchangeguid.  Keep in mind all desktop users on the network are connecting to Outlook without issue.
    I would appreciate any thoughts on solving this issue.

    Hi,
    According to your workaround, it seems that the Outlook Anywhere configuration in Outlook client is not correct when using the Autodiscover service.
    Once you connected to Exchange server by manually settings, please run Test E-mail AutoConfiguration tool in external Outlook client to check the autodiscover service:
    open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar - Test Email AutoConfiguration. Put your email address - uncheck use guessmart and secure guessmart authentication - click Test to check your Autodiscover service.
    Please check the Log tab and confirm whether the Autodiscover service is connected successfully. Also confirm if the connection issue happens to all external users when they open Outlook for the 1st time. In Exchange server, please make sure
    autodiscover.domain.com has been included in your Exchange certificate which is assigned with IIS service.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Exchange email will only sync over WiFi on iPhone 6

    Hello.
    We use iPhones with our Exchange 2010 SP3 servers for email through activesync.
    We've recently bought three iPhone 6 handsets and have set them up in exactly the same way as before - we have a mobileconfig file that runs users through the setup.
    On one of them email will only sync correctly when the user is in our office and connected to our internal WiFi.
    When he's using a 3g connection no new emails are delivered, though he doesn't get any error messages - it appears to sync ok, as though there are no new emails for him. Reconnect to our WiFi and email flows as normal.
    I don't believe we have any DNS issues as email is working just fine for everyone else in and out of our network.
    Has anyone else seen this behaviour, and ideally fixed it?
    Thanks

    I had this exact same problem with Email that would only sync while on company's internal wifi for my iphone 6, despite it working perfectly with my other device.  Checked the settings on both devices and they were all the same.  While looking online for a fix I noticed there are a lot of people with this issue, unfortunately none of the "fixes" worked for me.
    Originally I had my iPhone 6 setup to match the settings on my iPad with the server name "exchange.company.com".  This gave me all the check marks as expected, but it wouldn't update unless on internal wifi.  I was able to get my iphone 6 working by adjusting the server name in the account settings.  After I adjusted the server name to be "outlook.company.com", I got the same checkmarks and my email is now working perfectly.
    Not sure why it is different between the two devices but since it has solved my issue I will ignore that portion.  Hope this helps.

Maybe you are looking for

  • Album artwork either all mixed up or not showing up at all

    All of my albums have the correct artwork in itunes but after i sync it to my ipod touch, most of the albums dont have the covers and some of them have the wrong cover. how can i fix this? I dont remember any of this being a problem until i upgraded

  • Modifying Calendar.DAY_OF_WEEK issue

    Hi, I'm trying to get a report to run so that it gets data for the previous "business day" (M-F). So if a user comes in on Monday, he would get a report for Friday. However, I'm running into an issue where I do the following (after I already get the

  • Deploy ESS Customisations in Portal

    Hi All, A little bit of background on my problem: We had ESS/MSS business packages deployed in our portal landscape couple of years ago(nearly 4 years ago). Now we had a requirement to customise one of the ESS component. We set up the NWDI, created t

  • Font characters not displaying in certain contexts?

    I'm using this free font called 'Love Ya Like A Sister' to make a nature calendar. I'm including brief descriptions of the animals in the calendar, and when I typed 'Copperband Butterflyfish' for the last description, the 'fl' and 'fi' in 'Butterflyf

  • Oracle 11gR2 RAC Root.sh Failed On The Second Node

    Hello, When i installing Oracle 11gR2 RAC on AIX 7.1 , root.sh succeeds on first node but fails on the second node: I get error "Root.sh Failed On The Second Node With Error ORA-15018 ORA-15031 ORA-15025 ORA-27041 [ID 1459711.1]" within Oracle instal