N82 freeze issue - sent back to Singapore - also, ...

Finally decided to bite the bullet and send my N82 back to Singapore for repair. It was hanging on a black backlit screen about once every 2 days. When I remove dbattery and reinserted (only way to restart) I would lose random things from the phone memory. contacts, bookmarks, settings, access points, calender entries etc. got fed up. sent it off to singapore with proof of purchase etc. hopefully they can do something with it. I had this problem on and off for 5 months and tried EVERYsolution possible at home.No EU warranty, and phone insurance with O2 would nothelp either so sent it back. cost 30euros to post i back but probably worth it. Nokia will pay the return fee.
N86 - You all see the new N86 today? 8mp carl zeiss camera, but still has dual LED. I don't like Dual LED but its favoured over Xenon by many as it allows you to have a light on for the video. Xenon can not stay on and can only pulse a flash. makes for much better images, but poorer video. take your pic.
the new phone has a slider make up like the N85. has nice OLED screen too with no backlight. should save some battery juice.  source http://thenokiablog.com/2009/02/16/nokia-n86-8mp-hands-on-photos-from-singapore/
5110, 3210, 3220, 8210, 8850, 7210, 6230i, N73, N95 8gb, E51, N82

Excellent question cjlim, and something I have thought about. And the answer is........ YES. I would buy again from Singapore. Here are the reasons..
1. The phone model was out several months before it was available in Europe, and I really wanted it for the camera as soon as i was available.
2. I have rarely had any problems with Nokia phones in the past, so this seemed like an unlucky problem. but... I do agree as phones get more and more complex their may be more hardware issues.
3. The service from nokia in singapore was excellent. It didn't take as long as I thought it would to get repaired and returned.
4. You have a point about the 1 year versus 2 year warranty. plus it would be more convenient to drop the phone into a service point in dublin and collect it in 3 or 4 days. but still... I choose to buy the phone from singapore to get it months earlier, and also much cheaper. It was 400euro(sim free, unlocked) all inclusive(delivered to Ireland) when it launched in Asia market. The same phone was 700euro when it launched months later in Ireland. In fact I believe its still more than 500euro here sim free, 18 months from when I bought it!
Thats my reasoning anyway.
5110, 3210, 3220, 8210, 8850, 7210, 6230i, N73, N95 8gb, E51, N82

Similar Messages

  • I got my i phone4s few days back and i created an apple id with a credit card and when i go to the appstore to purchase apps,all have and message stating that "this app is no longer availabe"..how do i fix this issue?im from singapore by the way

    i got my i phone4s few days back and i created an apple id with a credit card and when i go to the appstore to purchase apps,all have and message stating that "this app is no longer available"..how do i fix this issue?im from singapore by the way

    If it is longer available then you can't get the app on your phone.

  • Limit order items to be sent back to sourcing on deletion

    Hi all,
    We are on SRM 7.1 Extended classic.
    Can anyone confirm if the limitatin on the LIMIT orders not being sent back to SOURCING even after the PO items are deleted is stilll valid in SRM 7.1.???
    Also we want to use LIMIT orders instead of service orders in SRM 7 as there are seevral issues when users try creating carts with the SERVICE HIERARCHY.To avoid the manual errors,we would like to use limit orders in SRM and then if required when the PO items are deletd in SRM the items should be sent back to sourcing.
    If the limitation for the LIMIT orders items still hold true for SRM 7,then is there a way or enhancement to enable the sending of limit orders back to sourcing once the items are deleted in the PO in SRM?
    I know the report responsible for snding items back to sourcing is BBP_GET_STATUS_2 and CLEAN_REQREQ_UP but is there a way we can handle the sendng of the PO items back to sourcing base don some custom logic for limit orders or for that matter any type of PO created in SRM?
    Pls advise.

    The note 1247922 is for EXTERNAL requirements/Purchase requsitions in ECC backend system and is not what I'm looking for.
    Neverthless,I will create an OSS message with SAP and check if tehre is any enhancmenet available for sending limit items back to sourcing on PO deletion.Will update the thread accordingly
    Thanks for the help.

  • BOXI4 SP2 P12 - No Business Layer Sent Back From Server

    Hi All,
    Have created a new multi-source universe using the Information Design Tool.
    Published the Business Layer to the repository successfully.
    When trying to create reports with the universe I now get an error - "No Business Layer Sent Back From Server".
    Have checked CMC permissions to the Universe which are fine and the Connection permissions which are also fine?
    What else could be causing this error?
    Thanks,
    Gary

    Hi Gary,
    If the issue occurs only on Webi Rich client and not on webi from Infoview, then check the note 1620509.
    https://service.sap.com/sap/support/notes/1620509
    Check also your BI4 version. If you are using a version below Patch 2.5, then it might be interesting to update your environment as some people experienced this error message on previous versions and not after updating. cf note 1622652.
    https://service.sap.com/sap/support/notes/1622652
    I hope this will help you
    Regards,
    Philippe

  • Windows 8 freezing issues

    Peace be upon you;
    I've been using windows 8 for quite a long time, recently the freeze issue began described as follows:
    *All system functions are stopped except the mouse, I can move it around but un-clickable ..
    *even ctrl+alt+del combination doesn't work ..
    *background programs stop, all what i see is the current screen nothing more ..
    *when the monitor is turned off due to idle state, it takes a while to wake up again and turn on the monitor.
    I ran the task scheduler, tried to disable some tasks that I thought they made the problem, but it still exists.
    I have no experience with any log files or crashing reports, so if any needed to diagnose the problem, I could extract them ..
    My last hope was refreshing my PC which restores windows to the default state and only keeps personalization, it kept freezing randomly which made me really upset.
    My graphics driver is up to date.
    System info
    Thanks in advance.

    Freezing here too, just thought i'd leave a mark for MS. Some reports have been
    sent, but most my crashes didn't leave any report of why and what hapend. One is for sure, it's not system overload... as one word doc is not loading anythng that hard to freez it up.
    For me it seams that it's related to internet connection, no difference if using IE or Mozilla, it occurred once with dropboxs, but that too has to do with internet connection, had turned wifi off at
    that time hoping to make it more stable. And when it happens it happens in bundles, 5 times in a row, then an
    unexpected running smooth will come (holding my breath like watching a horror movie).
    I got Win8 Pro- 64bit, might that be the incompatibility that keeps crashing this thing, windows update utility check compatibility with the old system (ran it with 32 bit XP Pro, lappy was built for
    Vista 32 or 64bit) and would have downloaded win8 32 bit, I went against it and now I'm to deal with that unholy deeds backfire? NVidias (win8) driver from their site crashed it to looping startup, and forced to go back to restorepoint, so that has made me
    cautious of downloading any drivers, as the only ones I can get from HP site are for Win7, should I give them a go? I did install it on new (intel 330) SSD,
    firmware updated,
    had some Intels tool
    chek it, all seemed to be working right.
    I may come out of the closet and say it out loud, I sincirely like Win8 and I want to keep using it, hoping badly this freeze thing to blow over!

  • Interface freezing issues and hard drive replacement

    Hi, I have an Imac. It was getting slow and kept getting a long time lag on typing etc. So I bought snow leopard, backed up and wiped and reinstalled the lot. Then it started freezing - from moment one (literally). I could move my mouse and stuff was still running but I couldn't click on anything or select anything or get any response at all. Sometimes it would "white out". Only solution was forced reboot.
    So I called apple, rand disk utility, kept showing disk errors - file 334576 should be file 334575 etc. Fixed them - they came back after each freeze. So they said its a hardware error.
    Took it to shop. They reinstalled and no errors showed in the tests - but then it kept freezing when they tried to use it. Eventually they settled on a hard drive error - fitted a new one (money paid), it didn't freeze in 48 hours of tests and use. They said that if it keeps freezing it must be an intermittent motherboard problem. TBH I'm not convinced because, though it was slow before SNOW, it wasn't freezing!
    Anyway, I took it home, put my stuff back on, was fine -
    next day, froze twice in 2 mins - once, rebooted, then again, froze instantly before dock had fully popped up! (It seems to freeze in movement a lot - like task switching or dock popping etc).
    It was then that I stumbled upon this term online "interface freezing issues" which seems to have been an initial issue with the imac, and there were some early posts about snow too. The problem is exact, if you minus this hard drive error issue, which MAY have been separate problem (cause by shorts caused by excessive cat hair inside computer).
    I have read that external drives etc can be a cause, but not heard usb mentioned, only flywire - I have a dual USB port external drive for time machine. But really, this freezing is entirely since snow.
    Can I solve this problem?
    Do apple acknowledge this problem?
    SHould I uninstall it and ask for my money back?
    I would like solid, conclusive answers if possible - from people with direct experience. I work online and am also a writer - i am BEYOND dependant on this mac (especially as my partner is seriously ill and I am the sole income just now).
    thankyou for reading
    Anna
    Anyway - ran disk utility - but no errors this time. Which is good.

    As for the taking apart part. I'm not too worried. I've read quite a bit on the subject and watched a couple youtube videos. Also, i've taken a iBook G4 apart to it's core to replace that hard drive and did it without a hitch.
    I'm a little unsure about the interface for the Optical Drive. From what i've read the HD is a SATA connection. While, the Optical Drive connection is IDE. Is that normal for one computer to have both?
    I found two drives both around $100 for each. One is SATA the other is IDE.
    SATA
    http://www.pioneerelectronics.com/PUSA/Products/BusinessProducts/Blu-rayDisc+DVD Writers/DVDComputerWriters/DVR-TS08
    IDE
    http://www.newegg.com/Product/Product.aspx?Item=N82E16827118021
    Also, the HD from Newegg that I posted above, runs at 3GB/s. I've remember reading somewhere that my iMac will only run the drive at 1.5GB/s. Is that true?

  • Multiple freeze issues on my laptop

    Hello.
    I'm experiencing multiple freeze issues lately. Inspecting all logs available but found nothing.
    1. sometimes gdm freezes while switching users in Gnome 3. I share my laptop with my wife, separate accounts. While switching from one user to another, somethimes gdm (screen with account names) hangs, in situations when both users are logged or one is not. Only thing that helps is to switch to console, log in and restart gdm.
    2. I had issues with suspend, so I turned off suspend based on inactivity. Now sometimes when laptop has some idle time and is inactive, screen turns off. Then it hands, all leds are on, unable to wake (turn on display), nothing works, switching to console, nothing.
    3. Total freeze while logging into Gnome 3 session of my wife. Black screen, all leds on, only hard turn off (long press power button).
    I inspected all logs in /var/log, also .xsession-errors in both home folders of both users. Can't find anything .... I'm desperate. Please post some tips, how to log more. I can't even submit or search for some bugs as I can't determine even what is the cause.
    My laptop is ASUS X50Z.
    lspci:
    00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
    00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx)
    00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
    00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
    00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
    00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
    00:12.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:12.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
    00:12.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:13.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:13.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
    00:13.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
    00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
    00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
    00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
    00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
    00:14.5 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40)
    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control
    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control
    01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
    02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
    03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
    Packages installed -> http://pastebin.com/efUsSdr4
    I will gladly post more info.

    lsmod:
    Module Size Used by
    fuse 66858 2
    ipv6 288122 24
    ext3 191948 1
    jbd 63179 1 ext3
    uvcvideo 64995 0
    videodev 85100 1 uvcvideo
    media 10565 2 uvcvideo,videodev
    v4l2_compat_ioctl32 8644 1 videodev
    cryptd 8309 0
    aes_x86_64 7508 2
    aes_generic 26138 1 aes_x86_64
    ecb 2073 1
    btusb 11385 0
    joydev 9895 0
    bluetooth 150884 1 btusb
    arc4 1410 2
    ath9k 86553 0
    radeon 994864 3
    mac80211 221931 1 ath9k
    ttm 54872 1 radeon
    drm_kms_helper 25721 1 radeon
    serio_raw 4294 0
    i2c_piix4 8224 0
    psmouse 55501 0
    snd_hda_codec_realtek 282216 1
    ath9k_common 1858 1 ath9k
    drm 185736 5 radeon,ttm,drm_kms_helper
    i2c_algo_bit 5199 1 radeon
    i2c_core 20460 6 videodev,radeon,drm_kms_helper,i2c_piix4,drm,i2c_algo_bit
    pcspkr 1819 0
    asus_laptop 14098 0
    sr_mod 14951 0
    ath9k_hw 304895 2 ath9k,ath9k_common
    ath 14770 2 ath9k,ath9k_hw
    cdrom 36553 1 sr_mod
    r8169 45411 0
    evdev 9530 10
    cfg80211 165636 3 ath9k,mac80211,ath
    sparse_keymap 3120 1 asus_laptop
    k10temp 2883 0
    processor 24224 0
    thermal 7799 0
    button 4470 0
    ac 2344 0
    video 11164 0
    battery 6453 0
    snd_hda_intel 22410 2
    snd_hda_codec 80889 2 snd_hda_codec_realtek,snd_hda_intel
    sp5100_tco 4568 0
    shpchp 26281 0
    mii 4059 1 r8169
    pci_hotplug 25454 1 shpchp
    snd_hwdep 6357 1 snd_hda_codec
    snd_pcm 74368 2 snd_hda_intel,snd_hda_codec
    rfkill 15498 4 bluetooth,asus_laptop,cfg80211
    snd_timer 19544 1 snd_pcm
    snd 58362 10 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    soundcore 6210 1 snd
    snd_page_alloc 7153 2 snd_hda_intel,snd_pcm
    vboxdrv 1790690 0
    ext4 375413 2
    mbcache 5881 2 ext3,ext4
    jbd2 70667 1 ext4
    crc16 1359 2 bluetooth,ext4
    sd_mod 28275 3
    usbhid 35352 0
    pata_acpi 3376 0
    hid 82435 1 usbhid
    ohci_hcd 21714 0
    pata_atiixp 3928 0
    ahci 20005 2
    libahci 19559 1 ahci
    libata 166724 4 pata_acpi,pata_atiixp,ahci,libahci
    ehci_hcd 40794 0
    usbcore 144144 6 uvcvideo,btusb,usbhid,ohci_hcd,ehci_hcd
    scsi_mod 132794 3 sr_mod,sd_mod,libata
    dm_mod 69692 12
    /etc/rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged, using "" makes hwclock fall back
    # to the value in /var/lib/hwclock/adjfile
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # Note: if unset, the value in /etc/localtime is used unchanged
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/Bratislava"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MODULES=(dm-mod vboxdrv)
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="yes"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="gorgoroth"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
    # - broadcast: broadcast address (ignored for DHCP) (optional)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # broadcast=192.168.0.255
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    interface=eth0
    address=
    netmask=
    broadcast=
    gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(hwclock syslog-ng netfs crond dbus gdm networkmanager @dropboxd sshd cupsd)

  • Snow Leopard Crash / Freezing Issue - Keyboard Dead - Hard Reboot Required

    Good morning,
    Been using Snow Leopard on a 24" 2.4Ghz iMac pretty much since the day of launch. Initially was very pleased, no real problems, seemed to run even smoother than regular Leopard, however, recently, my system has developed a bunch of issues, particularly when running word and/or transmission (possibly other apps, but I have noticed with these two so far).
    The main problem is, very randomly, the system will lock-up. This can be after 1 hour or 24 hours, there is no real correlation. After the lock up, you are able to use open apps, ie Transmission, Word, Safari, Finder, etc, but they do not function correctly...for example
    Word - You can click into documents, but any keyboard strokes are completely ignored.
    Safari - You can browse links on default start page, etc, but you cannot create new tabs or type anything into the address bar.
    Finder - You can browse folders; but you cannot perform any functions such as dragging to trash, etc.
    Also worth noting, it the main menu bar at the top of the screen continues to say either "Word" or "Transmission" etc, regardless of what application you are in. Clicking on any applications icons in the dock has no response unless they were already running.
    The system is unable to shut down or log off, and you cannot quit apps. The only option is to do a hard reset via holding down the power off button.
    Note: My system is set to never sleep. There is no screensaver.
    Any advice would be gratefully received. I'm a fairly new mac user so i'm not aware how to view log files etc., which may identify the problem.
    Many thanks in advance.

    Just want to reiterate. I am seeing freeze issues with my iMac 2.8 GHZ 4GB ram and wireless keyboard and magic mouse. Had this for two years without problem. When a freeze occurs mouse is reponsive but clicks don't give result. I am unable to open window to force quit apps. It may be related to iTunes but I can't confirm. Happening again now, even as I type this I can't open other appslike console log. I add more later.
    Jamie

  • [svn:bz-trunk] 15217: Bug: BLZ-508 - If server receives message for an unknown destination it shouldn ' t include the destination name in the error message sent back to the client .

    Revision: 15217
    Revision: 15217
    Author:   [email protected]
    Date:     2010-04-05 03:43:36 -0700 (Mon, 05 Apr 2010)
    Log Message:
    Bug: BLZ-508 - If server receives message for an unknown destination it shouldn't include the destination name in the error message sent back to the client.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Changed the error message to not include destination id. I'm also checking in a few minor fixes I had locally.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-508
    Modified Paths:
        blazeds/trunk/modules/common/src/flex/messaging/errors.properties
        blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
        blazeds/trunk/modules/core/src/flex/messaging/cluster/JGroupsCluster.java

    Thanx Mete, yeah i did...
    but i solved it some other way... not entirely sure this was
    it though as i was doing a lot of things at once...
    it was fds.swc... possibly it was out of date or missing.

  • DVD freeze when play back on  dvd player

    Hello,
    I create a DVD with DVD SP 3.01, When I play back the dvd in 3 brand of dvd player it freeze after 12 min of playback for about 2 sec and after continue to play to go to an other freeze about 10 to 12 min after. It does that in dvd with 25 min and more. If I do a small dvd of 10 min I see no freeze. I ckeck the MPEG2 file made by FCP and there is no freeze inside of it. I also put the QT directly in DVD sp ( encode it before burn ) and I have the same problem. Any idea...
    thanks

    It may be the brand of disc. Try Verbatim DVD-R or Verbatim DVD+R DL.

  • My iPad takes hours to charge even when I turn it off I have bought like 6 chargers and my iPads been sent back twice and it still doesn't work when I'm charging it

    My iPad takes hours to charge even when I turn it off I have bought like 6 chargers and my iPads been sent back twice and it still doesn't work when I'm charging it what do I do ??

    I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
    ... This is happening almost most of the time keeping my phone down most of the times.

  • T30 freezing issues and Touchpad & Trackpoint buttons not working.

    Firstly I'll explain the freezing issue (this is now the 3rd time I've typed this, as the first two times my laptop froze before I finished!)
    I run my laptop with the battery at 100% and plugged in and that's fine; as is running it on battery. The problem arises when my battery is low and I plug it into recharge. Soon after it's running on a/c the screen will go black and only way to shut down is by holding the power button. If I try to restart it too soon, the indicator lights next to the power button will illuminate, but the screen will stay black. Usually after 5-10 minutes it'll boot to the IBM screen & boot the rest of the way, but not too long into normal operation it'll go black again (sometimes hitting ctrl/alt/del will bring the screen back but it would be very distorted (pixilized) and would go black again and reboot. What could be causing these problems while recharging the battery? I've tried this with a couple different batteries (both OEM IBM) and it does it with both.
     Secondly, both left and right "mouse" buttons are now nonfunctional (though the middle button of the track points works.) I have the latest version of Ultranav Wizard and all the buttons are enabled. The touch pad and trackpoint ball work fine, just the 2 left and 2 right buttons do not. What could be the culprit for this issue? Luckily I have a usb mouse so that's what I'm using for the time being.
    Message Edited by GoalieFergy53 on 02-14-2009 02:30 PM

    My T42p Touchpad and Trackpoint work fine however,
    the buttons are not responding properly.
    I'm forced to use an optical mouse to properly maneuver when working on
    the screen.
    When the well is dry, we'll all know the value of water.

  • IPod Touch 4th Gen iTunes Sync Freezing Issue

    My iPod Touch 4th Generation freezes during the "Backing up" stage of sync. Nothing I have tried so far has resolved this issue and it's getting very annoying seeing as how I can't sync my iPod at all. I know it isn't just the iPod's fault, because it happened to my older one too. I've done everything I have found people suggesting and none of it has worked. Any help on this would be greatly appreciated.
    I am running Windows 7 64-Bit platform on iTunes 10.6.0.40
    Thanks,
    Kevin Hasemann.

    Try here:
    iOS: Troubleshooting backup issues in iTunes

  • My sound keeps turning off and then gonas back on and also its ending my calls when i got full sigal

    Hi 
    could you please help me as my sound keeps turning off and then gonas back on and also its ending my calls when i got full sigal

    Hi john00000001,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Cheers,
    - Judy

  • BT Cloud App for Mac - Upload freeze issues?

    Anyone experiencing freeze issues during upload sessions? 
    I just downloaded the app yesterday and kicked off an upload of 20K (ish) files.  It progressed nicely through the day, but clearly froze at some point during the night.  Following a reboot I've seen a further freeze in the last couple of hours and resorted to closing/re--opening the app. 

    Hi there, 
    Thanks for replying.  I have had issues with this continually throughout the upload.  I've managed to back-up just over 8Gb since Saturday afternoon, but not without a bit of coaxing (closing and re-starting the app every time it appears to freeze.).  In fact my upload has just finished within the last few minutes.  I've left it on after I've gone to bed on two evenings, but it's clear by morning that the app froze at a much earlier point.  I'm not on Infinity yet, but I do get a rock solid 1Mb upload so whilst the upload rate isn't wild, it would be adequate if not for the reliability issue.  
    Basically the client seems to freeze after a certain time, but there doesn't seem to be any particular pattern in terms of when it happens. 
    I'm really excited about using BT Cloud, having had problems with several other similar services.  I love the fact that it doesn't mess with your local file copy, and that it doesn't expect the user to work 'in the cloud', and that it iteratively looks for changes and just deals with them.  
    The iPad app seems pretty good, other than the wildly random way the sub folders in my Documents folder display.  I have a lot of sub folders.  I know there's a search bar, but still, a simple alphabet order approach would be better. 
    Happy to provide any further input wrt the Mac app stability issue. 
    OS X (10.8.5) 
    Safari 6.0.5 

Maybe you are looking for