N82 Freeze While Updating Plz Quick Help

i was updatig my N82 firmware and suddenly my computer freeze after it says failed to update remove battery and try again when i was trying again my computer freeze and i had to restart it and my phone shutdown and turned off when i try to open it nothin happen and even when i try to reupdate it says unable to find phone.... plz help wht should i do ? i tried to reupdate 10 times and always say same thing.... and i can't send it to nokia care cause using N82 on egypt is illegal and they dont fix it here...
plz help me wht should i do...i can do anything from computer so i can fix it... but send it outside its immposible...
Solved!
Go to Solution.

Hi ahvampire
Have a look at this post by psychomania which is fairly succinct:
/discussions/board/message?board.id=swupdate&message.id=36905#M36905
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Ipad 2 freeze while updating OS2

    My Ipad2 2G (64Gb) freezed while updating OS5 yesterday, without finishing updated to OS5, the USB cable was unplugged to the PC itunes. Now ipad2 freezes with ipod logo on the middle of screen. If Ipad2 is plugged again with ITunes, iTunes can not identify Ipad2 with message "iTunes could not connect to this iPhone because an unknown error occurerd (OXE8000065).
    How should it be solved? How to stop the freeze and restart Ipad2?

    I found the way already, just push start button and home bottom simultanuously and hold for 10 seconds, than Ipad will shut down. After that, push start button to start up back to the system. It works.

  • Computer freezes while updating security.

    Hello again. My computer's problems have only intensified. Originally my computer would only freeze while multi-tasking or under heavy graphic stress. Now, the computer freezes while preforming mundane tasks such as moving a window. It's branched into other problems.
    I cannot complete the download of the new security update. My computer freezes mid-download, regardless if I'm doing anything else or not.
    My computer is even freezing while loading itself up. I have been told previously that my computer has a video-card issue and that the card was integrated into the computer. Now, I'm not so sure that is the problem. These freezes and glitches started some time after I performed a virus and spyware scan. I think that the scan may have corrupted a file during it's search.
    Thanks in advance.

    Hello again. My computer's problems have only
    intensified. Originally my computer would only
    freeze while multi-tasking or under heavy graphic
    stress. Now, the computer freezes while preforming
    mundane tasks such as moving a window. It's branched
    into other problems.
    I cannot complete the download of the new security
    update. My computer freezes mid-download, regardless
    if I'm doing anything else or not.
    My computer is even freezing while loading itself up.
    I have been told previously that my computer has a
    video-card issue and that the card was integrated
    into the computer. Now, I'm not so sure that is the
    problem. These freezes and glitches started some
    time after I performed a virus and spyware scan. I
    think that the scan may have corrupted a file during
    it's search.
    Thanks in advance.
    I had the same problem. It was finished with the update and when I pressed the restart button, it was ready to restart, then I got the blue screen with that loading image that goes round in a circle. I waited like 5-10 min and by the time that happened the screen was blank, but it still made noise that the computer was still running. So I did the cold shut down and restarted it.

  • Ipod classic (120GB) Freezes while syncing music please help

    My ipod keep freezing while im syncing music it stops around 300 - 400 songs and just stops or cancels itself out
    What ive done
    Uninstalled itunes
    Reinstalled it
    Restored it around 10 times
    tried it in disk mode
    If you have any ideas please share and I shall try it

    i have the same problem ! i have reformatted ipod also reinstalled i tunes now at the end of the old teather!! cant afford to pay itunes support help would be greatly received

  • IOS 6 freezing while updating.

    While updating my ipod touch to the iOS 6, it went to the start up screen and the loading bar was stuck at half way and it froze for about an hour and did not move. I restarted my ipod and put it on my dock and took it off and restarted it multiple times and it goes to either a blue, white, black, or a dark screen with a faint apple icon. I need help to get my ipod back on or how to restore it, because the computer does not recognize that my ipod is connected and I do not know what to do from here. Please help!

    My daughter got her iPod Touch 4th Gen stuck early Saturday morning while trying to update to IOS 6. Thanks to a post by you, I was able to get it out of the white screen and updated via restore function in iTunes. It tried to fight me though. When I got the iTunes logo with USB arrow, all was going well with restore until while the IOS 6 file was downloading, the iPod's screen went back to white. iTunes continued to download the update file (850 MB). I had to unplug and let the battery die again. I plugged it back in to get the Apple logo to come back on the screen. Note: I had to be paying attention when it appeared because it didn't give me long to go through the instructions in your post. I missed it once and I had to start over. What I had to do was hold the power and home button at the same time after the Apple logo appeared to get the iPod to tun off. Then I held the home button and plugged into the USB port on my PC and then the iTunes logo with USB arrow showed up. Initiated the the restore function and all went well that time because the file was already complete and ready when iTunes needed it. It can be frustrating, but don't give up. Stick with it and try to get useful information on the web like I did because the iPod is useless with that horrible whie screen. It got stuck on the Apple logo 2 weeks ago and had to turn to the web to get help on that too. BIG SHOUT OUT TO YOU SUPERMURPH!!!!!

  • IPhoto 09 Freeze While Updating Library.....Everytime

    I recently bought a Macbook Pro 15" 2.4GHz and installed iLife 09. On my previous computer (Powerbook 12" 1GHz) I was running iPhoto 2.0.1. I had copied that entire HD to an external drive. I plugged in the external drive to my new Powerbook and copied the User>Pictures>iPhoto Library Folder to appropriate location on the new HD. When starting up iPhoto 09, I got the message that it needed to update the library. Every attempt I made resulted in iPhoto freezing with the "Updating photo library...Time remaining" message. It often froze with the same amount of time remaining. I have tried several remedies: I deleted the com.apple.iphoto.plist from the preferences folder. I also tried to use BatChmod after following instructions in another forum, but that didn't seem to help. I also downloaded iPhoto Library Manager and used its rebuild function. This appeared to work and all the pictures are present (minus about thirty, but I think they were duplicates), but all 7,000+ got imported with the same date (DEC 31 2000) and were randomly arranged into about a dozen Events. Also, none of the Albums were transported. I don't have time to individually rearrange all the photos and rebuild all the albums. I would be happy solving either one of the problems. Thanks.

    Thanks for responding Larry. I tried that, but unfortunately it did not work.
    Based on what I read in some other threads, I tried forcing iPhoto to rebuild the library by holding command-option while starting iPhoto, but that did the exact same thing. I ended up downloading iPhoto Library Manager and using that to rebuild the library, which worked. There was one photo that could not be copied over (corrupted file or something), so that's probably what was making iPhoto hang. Luckily my mom had a backup on a CD.

  • Short freezes while updating Google calendars

    After updating to Mac OS Lion iCal "freezes" at starts while it updates my Google calendars. I can't click or move anything in iCal. How can I solve this problem?
    Steffen

    I have the same problem.  I updated to 10.7.1 and all of a sudden, my mid-2010 MBP 15" starts up, I log in and it starts iCal and freeze.  No keys no mouse clicks no anything works.  Help!

  • Freeze while updating version

    please help...my iphone freeze after fail to update to io6. Updating by itune is succeesful.. but when in the middle transfering hdware to iphone a message pops up telling a problem detected ...and at apple logo it freeze...

    You know,
    I'm on my second ipod now. I purchased my last one in late December of 2004. By March, Apple had to replace that one. Now, the replacement that they had sent me is freezing to the point of not functioning. 1 year is PATHETIC for a $300 dollar product. However, I NEED an mp3 player. I couldn't live without one. Am I going to buy another ipod...I don't know. I can understand the battery needing to be replaced, but total failure within such a short period of time is atrocious! When I contacted Apple, I was told that there is nothing that can be done, and that, next time, I should buy the AppleCare. So, for $60 more, I'll have my purchased replaced for 2 years. Because it sure won't last that long. That is not acceptible!

  • Error while updating account: need help with error msg

    Hi all,
    when I try to change the AccountOwner of an Account via Web Service I sometimes get the following error:
    <faultstring>Method 'WriteRecord' of business component 'Account' (integration component 'Account') for record with search specification '[External System Id] = "27446"' returned the following error:"The selected record has already been added to the list. Please add another record or close the pop-up list and continue.(SBL-DAT-00357)"(SBL-EAI-04375)</faultstring>
    Can anyone please help me to interprete this fault?
    Thanks
    Michael

    Looks like you are creating an Account Team member who already exists in the account team vs just updating the Account owner

  • ITunes 9 freezes while "Updating iTunes Library"

    I have never had an issue with iTunes before, and after installing the newest version, I opened iTunes for the first time. It successfully went through the "Checking iTunes Library" progress bar, but when the "Updating iTunes Library" progress bar comes up, it gets to about 80% and then freezes my entire computer. I've tried uninstalling and reinstalling with the same issue. I've tried uninstalling and installing an older version, but it would not allow me to start the old version because it said something had already been created by iTunes 9. Has anyone else had this issue? Any ideas how to fix it? I never realized how dependent I was on iTunes until I wasn't able to use it anymore!

    I have been having the same problem. Then I got the idea to cut and paste the message that comes up when I manually ended the program. That is what got me the answer to my problem. Someone posted that sometimes malware will try to take the place of other files. I have McAfee and it didn't find anything. But I did download a free program called Spybot Search and Destroy. It did, indeed find malware on my PC and after it got rid of it, my itunes is working as it should!!!

  • Freeze while updating after retoring, resetting, charging etc etc

    itunes didn't recognize ipod and !folder showed on ipod screen. After charging, resetting, & restoring, I got a disk insertion message. I erased disk and could then import songs to ipod and play songs, but as ipod was mid update of itunes library it froze. Continues to freeze on random songs even updating manually. Did I miss a step? Or does my ipod need work?

    You know,
    I'm on my second ipod now. I purchased my last one in late December of 2004. By March, Apple had to replace that one. Now, the replacement that they had sent me is freezing to the point of not functioning. 1 year is PATHETIC for a $300 dollar product. However, I NEED an mp3 player. I couldn't live without one. Am I going to buy another ipod...I don't know. I can understand the battery needing to be replaced, but total failure within such a short period of time is atrocious! When I contacted Apple, I was told that there is nothing that can be done, and that, next time, I should buy the AppleCare. So, for $60 more, I'll have my purchased replaced for 2 years. Because it sure won't last that long. That is not acceptible!

  • Sir, i have apple macbook the old not it is neither  pro nor air it is a simple one . it is running on mac 10.5.6 and i am not able to update it to 10.5.8 it hangs while updating so please help

    sir i cant update my macbook to mac os x 10.5.8 . it hangs wile updating and i am looking for a better update . knidly reply thanks

    Some general advice on updating Leopard:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    [b]If you are updating Safari (or just have):[/b]
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up.  If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for  problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    /Library/InputManagers
    ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).
    Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
    http://support.apple.com/kb/TS1541?viewlocale=en_US

  • Software Update Freezes While Updating OS

    Hello Community,
    MacBook Pro: Core 2 Duo, 2.4 GHz, 4 GB RAM
    I'm sure others have had this problem and I'm wondering if anyone knows of a reason for it.
    For quite a while, at least since installing Snow Leopard, when I try to install OS updates using the Software Update program the same sequence of events occurs:
    1) The Updater thermometer appears and increases rapidly at first while 'Writing Files' appears above.
    2) Gradually the thermometer slows down as it reaches its final 1/4.
    3) As the thermometer gets to the end it slows down exponentially until,
    4) The thermometer appears to have reached the end but nothing further happens, and
    5) I have to manually shut down the machine and reboot.
    I have worked around this problem by downloading the installer directly from Apple, avoiding Software Update, and the installations have proceeded as expected and without incident.  But, why is Software Update not completing the installation?
    Thanks,
    JAClay

    If you cannot boot into the recovery partition or Internet recovery I suggest a last gasp attempt.
    Try SMC and PRAM resets:
    http://support.apple.com/en-us/HT201295
    http://web.archive.org/web/20140711222006/http://support.apple.com/kb/ht1379
    Then try a Safe Boot:
    http://support.apple.com/en-us/HT201262
    If no success, an appointment at an Apple store genius bar becomes the best option.
    Ciao.

  • USB disconnected while updating! Any help, please??

    Hi.
    I was updating my x10i to 2.3 yesterday when the usb cable got disconnected briefly from the phone. The phone turns on, displays the 'Sony Ericsson' logo, then displays a funny looking screen (like the colour stain u get on the screen of a cracked LCD). It does nothing apart from this, even after removing battery and trying again, etc. It doesnt progress any further. I'm assuming what i succeeded in doing was to 'brick' the phone?
    What i've tried so far
    I've tried using PC companion, but since the update was interrupted midway PC companion thinks the phone has 2.3. The repair option does not work, and neither does reinstall.
    Can anyone please help me?? Any method at all, doesnt really matter as i've backed up all data.

    try to update over the air by using wifi..
    go to settings > about phone > software update
    or use this software instead..
    http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe

  • IPhone 3GS -- Repeatedly freezes while updating to iOS 6

    Perfectly working iPhone 3GS initially, then I tried upgrading to iOS 6.  It froze at about 55% to 60% (based on the progress bar) and then after awhile it went black.  No way to get it back easily.  Repeatedly, I hit the two buttons together to reset, sometimes it works and I get the Apple symbol, but it hangs there permanently if I am not connected to the computer and, if I am, with iTunes running, it shows the phone there but won't let me click to "see it".  The iPhone then tries again to update, but freezes again at 55% to 60%.  There seems to be no way to break this cycle.
    Anyone have ideas or suggestions?  It appears that the iOS 6 update has killed my iPhone.

    I'm having exactly the same issue. Phone now won't do anything.

Maybe you are looking for