N82, nokia maps2 strange problem!Delete maps

Hi,
I'm italian and I have a great problem with Nokia maps2 and my n82.
I have install application (nokia maps2) and I use it first time with my wi-fi connnection. I install nokia map loader 1.3.8 download my Map(Italy) and all is ok.
When the application start all is ok, I see the map and I can navigate. Close application and after 2 or 3 hours I restart tha nokia maps 2 and the map is not visible.
Browse my memory card and I see that the diskcache folder is empy!!! Why??? But if I check the memory capacity the free space is always the same.
I try to format my microSd but nothing. I try to reinstall nokia maps 2 but always the same error.
I try a lot of time but I don't have any ideas...
What the problem? My microsd? I have to reset n82?
Thank's,
Mattia

My best guess would be:
Restart or if you prefer the hard version - Reset phone.
Format memory card.
Install maps application (the version you prefer eg: latest) to the phone.
(I found that the latest firmware upgrade still gives you the latest .V1 version.)
Download map-loader to your(or your friend's or stolen computer)
Download and install maps using your computer to your phone using Map-loader via usb file transfer connection.
Take someone to pizza or Lenticchie di Castelluccio with your gps.

Similar Messages

Strange Problem in Mapping

Hello,
When I execute the mapping manually in the production I get field "Storage location" populated correctly in my Target structure.
But through interface with same payload this field is empty and not getting populated. I cheked in trace that after the mapping is executed the value is blank.
Can you please suggest??
Regards,
Vinit

Hi,
Please follow these steps
1. in SXMB_Moni -> Copy payload from the step before request message mapping.
2. Open Message mapping -> test -> Src - and paste the payload here for 1record and and see if it can generate any target field.
It won't generate any record.
3. Now close and open Message mapping again -> test and input field and then go to src and copy that xml and make ur source xml exactly like that and try to send msg again.
Hope this will help you.
Regards
Aashish Sinha

Nokia 6020 strange problem

my nokia 6020 has been indicating the headphone/handsfree icon.
this means a call comes in i cannot hear the caller using the headset.
I have tried restoring settings, remove battery, change profile but no change.
interesting thing is I HAVE NEVER USED THE HANDSFREE KIT on this phone.

Try plugging the headset into the phone then take it out, might do something to the connector.
Nokia N95
V 20.0.015
0546553

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. Please help

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.

zapgrap wrote:
there is no information of locations.
Then no information exists. Use the Report a Problem button within the app to report it.

Nokia 3250:A very strange problem...

hi..i'm facing a very strange problem in my handset 3250.. i've upgraded its os but still there is problem: http://discussions.europe.nokia.com/discussions/board/message?board.id=smartphones&;message.id=9102#M9102 any idea about such type of problem.....

MR.,
what is firmware?? How can i have its latest edition??
Can you help me because i too have the same problem:
Problem 1:
1-I install any software (e.g:snake game) through Application manager (Pc Suit) in memory card.
2-I launch that software (snake game) just after installation it works properly.
3-Now i switch-off the hand set and than switch-on it.
4-I try to launch that software (snake game) again but it doesn't response.
Problem 2:
1:There is a image in my Memory card.
2: I set that image as a wallpaper.
3-Now i switch-off the hand set and than switch-on it.
4-Wallpaper reset to default one.
Problem 3:
1-I install a theme through Application manager (Pc Suit) in memory card.
2: I apply that theme in my hand set.
3-Now i switch-off the hand set and than switch-on it.
4- Now theme reset to default one.

Strange problem with Transformations Mapping

Hi All,
I am facing a strange problem with respect to the data loading to ods from data source.
I have mapped a field, Number of days which is the difference between posting date and payment date (field in ECC, length char 5) mapped to characteristic zdate_1 length 5 without alpha conversion. (Date difference is calculated in ECC)
When I load data in production it is not fetching the records from PSA (Values exist for this field in PSA).
I have 90 fields in datasource whichbring data to PSA.
Same is working perfectly in Quality and Dev servers.
Where could the problem be?
Please suggest a solution.
Regards
Joga

Any Ideas...

Nokia 5530 RM-504 Strange Problem

Hi All,
I have Nokia 5530 RM-504 strange problem after flash latest version 31.0.005 two problems create
1) Before flashing Pakistan GMT+5 but after flash Pakistan GMT+6
2) Before flashing sending MMS work fine but after flash when I send MMS 1 time but set sending auto mms same cell no. after 30 sec.
Any idea how to solve those problems.

Hey the problem isn't with the phone i don't think.
I had the same issues with the sound quality and and pushing the button making the sound the good.
Its because there is a diference in the design of theheadset jack/phone plughole.
the wierd sound is a result of the ground and mic wires going to the wrong places. you can cut the plug then re solder the wires back together but switch the mic and ground wires around then it will work fine on something that it wasnt working properly on, but it will stop it working normaly on anything that it curently works on

Please help me with Nokia E71 very strange problem...

I have Nokia E71_v1, I got lots of strange problem like:
1- The camera didnt save the images and create the images like this: Name of the image*jpg but I can take videos without a problem.
2- when I put anything in the memory card or the phone memory it became currpted and then I couldnt open them at all, the message "can open the file" or "file is currpted" appears.
3- I couldnt install any application to the phone, if I put any sis file on the memory I get "file currpted" message but if I sent it to the phone via bluetooth I could install it.
4- The name of the folders usually change their name and currpted characters appeard in the folder naming.
5- When I added any mp3 files to any memory the files are disappeared.
410.21.010
RM364
Noka E71-1 (19)
please help
Attachments:
090620091272.jpg ‏242 KB
090620091273.jpg ‏299 KB

You better reset the E71. Dial *#7370# 12345 reformat, you'll lose all data. Make a backup first and restore without the settings. Reformat the card in the phone and remove the card using the menu from the power button. Do not encrypt the card as a test.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Strange problem with my nokia 5230

Recently i sent my phone of for repair and when i got it back i have this strange problem, the screen goes big when i go on the internet, now before there used to be a full screen icon and if i clicked that the screen would go back to normal size, now this icon seems to be missing from my phone does anyone know how i can get it back? I have to press the silly arrow at the bottom of the screen all the time if i want to go back a page and it has become very annoying!
Hope someone can help me thanks in advance

No. You can not downgrade the firmware...
New firmwares have so many advantages.. If the behaviour you have mentioned is not like the earlier version.. once you get used to it you may in fact like it..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Strange problem with WD component build

Hi all,
I have strange problem with building one wd component, which is part of SC. I'm getting few errors which stops me from building component (and transporting to other systems via CMS of course). I'm providing sample of the errors (3 types) and ant error:
[code]     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute startDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute stopDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_NAME_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_ID_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextModelNode SuppMatGroup [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextValueAttribute material_group_list [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Warning] com.gbs.gmob.ApprovalRejectView --> TextEdit TextEdit: UIElement does not have a label
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:153)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2050)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1299)
     [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
     [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:341)
     [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:309)
     [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:336)
     [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
     [wdgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
     [wdgen]      at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:225)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:201)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:354)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5559)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     [wdgen]      at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
     [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
     [wdgen] ERROR: Generation failed due to errors (6 seconds)
Ant runtime 9.234 seconds
Ant build finished with ERRORS
[Error]   Generation failed!
Error: Build stopped due to an error: [Error]   Generation failed!
[/code]
Strange is that if I try to rebuild and deploy locally, no errors occurs and I can normally deploy and run application manually!
Does anyone have experience with this problem?
Thanks in advance!
Regards,
Ivan

Hi Ivan
I have faced this problem earlier BUT ultimately I have to create the DC from scratch.
But you can check these things:
1.Have you copy/pasted Dictionary type from other location (check the path of the dictionary types ) --> If yes then deleted that and create again(do not use copy/paste)
2.This also happens if your "Used DC" has some problems in the JDI --> Remove the used DC and add it again.
3.Make sure the NWDI infastructure is perfect- this may be a cause.
4. Check Context mappings --> delete all mappings > save metadata > Create again.
5. Delete the model and recreate it again.
6.If you have done reimporting model make sure to restart J2EE instance.
Hope this solves the problem - if not please post
Regards
Ananda

Web Service Strange problem

Hi
I have the following strange problem while calling a
web-service that is bind to a data grid on a popup container:
When I’m calling the web service using the popup
container automatic event (i.e. show, creation-completed, activate,
etc) the structure returned from the web service is an [Object
Proxy] type that needs to be decipher…
Changing the logic and calling the same web service by a user
interface action (click etc), returns an ArrayCollection Object.
The question is actually what is the difference between an
automatic and a user action?
Should there be such a difference?

Hi
Again you are trying to add an empty line and then delete it. Well what i am saying is you dont have to do the lines
complex.addRETURN(new ComplexType_BAPIRET2());
complex.addUSERLIST(new ComplexType_BAPIUSNAME());
ComplexType_BAPIUSSEXP d1 = new ComplexType_BAPIUSSEXP();
complex.addSELECTION_EXP(d1);
ComplexType_BAPIUSSRGE d2 = new ComplexType_BAPIUSSRGE();
complex.addSELECTION_RANGE(d2);
complex.removeSELECTION_EXP(d1);
complex.removeSELECTION_RANGE(d2);
input.setParameters(complex);
Just write the following code and you are good to go.
Bapi_User_Getlist_Input complex = new Bapi_User_Getlist_Input();
wdContext.nodeBapi_User_Getlist_Input().bind(complex);
complex.setMax_Rows(10);
complex.setWith_Username("X");
try
wdContext.currentBapi_User_Getlist_InputElement().modelObject().execute();
catch(Exception e)
wdComponentAPI.getMessageManager().reportException ("Exception occured "+e,true);
Hope that helps you. You dont have to pass any values to the table structures. This specific bapi does not require data to be passed to the structures and by doing so empty lines are added and that is what i was saying when i explained in my previous post. Hope that clarifies your doubt. Do let me know in case u require further clarifications.
If you are getting a error saying Return and Selection_EXP are required check the mapping.
It is enough if you just select the nodes under
   Bapi_User_List_Input
      |_Output
      |    |_Return (Model Node)
      |    |_Selection_Exp (Model Node)
      |    |_Selection_Range (Model Node)
      |    |_Userlist (Model Node)
      |    |_Rows (Model Attribute)
      |_Max_Rows (Model Attribute)
      |_With_Username (Model Attribute)
and of course select the Model Attributes MAX_ROWS and With_Username
Let me know if you require any more information
regards
ravi

Hibernate-very strange problem, help please

Hi, i got such a strange problem that im sure you ll think im doin crazy talk :) , i dont see why this would happen at all, i have a class called "Package", mapped to a table "package". whenever i do a query on this table using hibernate, even the simplest "find all" kinda of query, hibernate does update on the table b4 doin the query! even more weird, it does the update when the first query on this table happens, it deletes all values of a column (yes only this column); then if i do the same query again, no update at all. however if now i mannuall add those missing values, it does the update again and deletes them! sry its confusing, heres my code and more of wat i done:
The mapping Package.hbm.xml
<hibernate-mapping package="tuition.bo">
<class name="Package" table="package">
<id name="id" column="study_package_id" type="long">
<generator class="sequence"/>
</id>
<property name="name" column="name" not-null="true"/>
<property name="satTiming" column="sat_timing" not-null="false"/>
<property name="satSubjects" column="sat_subjects" not-null="false"/>
<property name="sunTiming" column="sun_timing" not-null="false"/>
<property name="sunSubjects" column="sun_subjects" not-null="false"/>
<set name="classes" inverse="true" cascade="delete-orphan" lazy="true">
<key column="package_id"/>
<one-to-many class="Class"/>
</set>
</class>
</hibernate-mapping>
For example initialy i populated database using hibernate, like this:
package_id, name, sat_timing, sat_subjects, sun_timing, sun_subjects
1 no.1 9-12 business 9-12 law
2 no.2 9-11 business 9-11 law
Then after i populated this database, i did this query:
List res=getHibernateTemplate().find("FROM Package");
and you can see the log file as such: (excerpt)
16:23:06,687 INFO TransactionFactoryFactory:31 - Using default transaction strategy (direct JDBC transactions)
16:23:06,703 INFO TransactionManagerLookupFactory:33 - No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended)
16:23:09,968 DEBUG JDBCTransaction:46 - begin
16:23:09,968 DEBUG JDBCTransaction:50 - current autocommit status: true
16:23:09,968 DEBUG JDBCTransaction:52 - disabling autocommit
16:23:10,640 DEBUG SQL:324 - select studypacka0_.study_package_id as study1_, studypacka0_.name as name12_, studypacka0_.description as descript3_12_, ....... from _3AT_package studypacka0_
Hibernate: select studypacka0_.study_package_id as study1_, studypacka0_.name as name12_, studypacka0_.description as descript3_12_, studypacka0_.day as day12_, studypacka0_.sat_timing as sat5_12_, studypacka0_.sat_subjects as sat6_12_, .......
16:23:10,734 DEBUG JDBCTransaction:83 - commit
16:23:10,796 DEBUG SQL:324 - update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
Hibernate: update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
16:23:10,812 DEBUG SQL:324 - update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
Hibernate: update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
16:23:10,812 DEBUG SQL:324 - update _3AT_package set name=?, description=?,
16:23:10,953 DEBUG JDBCTransaction:173 - re-enabling autocommit
16:23:10,953 DEBUG JDBCTransaction:96 - committed JDBC Connection
as you can see, it does update and changed table field values to this:
package_id, name, sat_timing, sat_subjects, sun_timing, sun_subjects
1 no.1 business law
2 no.2 business law
---------- all tiimings are gone. and now if i re-do the same query, there are NO UPDATE operations....howver if i add some values to sat_timing, sun_timing, and re-do the query, very surprisingly, i saw those update operations which delete all timing values again!
im totally lost... i havent changed any config, this doenst happen to my other classes at all but just this one.... any ideas please! even some thought of what may caused this would be great help! thank you!

well i got the setters wrong.... being so stupid i am... sry for creating such a long and massy thread.

Problem with maps on e72

Hi everyone
I've got a problem with maps on my E72.
I've seen advert that Nokia is going to let everyone use maps for free on selected models.
I was going to buy Sat Nav for whole Europe as I travel a lot and I was going to change my old N95. I thought I could do both in one new phone. Checked all the available models and chose E72. It said it;s got GPS and you don't need to use your network and spend fortune on internet connection. Got it from eBay for £270.
I installed Ovi Maps from internet and the first thing that surprised me was it had 'only' 7-8MB.
I thought that something was wrong, maps for 72 countries couldn't be 8MB big.
After some time I managed to set my e72 up. Put my Maps on and...
It takes loads of time to find GPS connection, but the worst thing is if I type lets say Paris it doesn't find anything. Map has wholes, like suddenly the roads end and there's nothing there.
My question is what am I doing wrong? Do I need to download something more? I didn't have any maps on my phone when I bought it. Where can I find them?
If someone could help I'd appreciate it.
Thanks a lot.

I forgot to mention that when I choose a destination it keeps saying Calculating route all the time. I waited about 15 minutesand it didn't calculate anything.

Strange problems on Macbook Pro over past year...

I'm about to do an erase and install after having numerous strange problems on my mid 2009 17" Macbook Pro (Leopard) over the past year, some of which I have opened threads for on these forums.
They are listed bellow to see if anyone wants to give their final two cents as to what is causing them. They may or might not be related.
1) I recently found the "Unknown" user classifications at second from top in the user priveleges for the main Macintosh HD folder and "Local Work" – which is my main folder for work.
http://discussions.apple.com/thread.jspa?threadID=2741617&tstart=0
2) Last Summer I had some very strange login problems which were well documented in this very long winding thread here:
http://discussions.apple.com/thread.jspa?threadID=2485199&tstart=0
3) Can't access iTunes store due to this error code -54. Thread opened here:
http://discussions.apple.com/thread.jspa?threadID=2653733&tstart=0
4) Some proceses I've seen in the activity monitor that are possibly a little sketchy are as follows:
- "netsessionmac1" ... Akamai playing about?
- "TaskManagerDaemo" ... with "Root" user, ... sounds a bit vague and possible malware according to google?
5) In Skype I get constant warnings of other computers trying to connect from Little Snitch and Virus Barrier. I get so many of them one after they other pausing skype that I can only use Skype with Little Snitch off. I can only use it late at night also as there seems to be more attempts being blocked in virus barrier during the day that I can't even get past the login:
Some examples in screen grabs:
http://oi56.tinypic.com/xkwwtf.jpg
http://oi55.tinypic.com/2v2w941.jpg
And other examples of the hundreds of different IP addresses I've had asking to access computer on some obscure 4 digit port:
http://whatismyipaddress.com/ip/86.178.52.58
http://whatismyipaddress.com/ip/94.168.76.16
http://whatismyipaddress.com/ip/94.171.116.123
http://whatismyipaddress.com/ip/92.235.196.125
http://whatismyipaddress.com/ip/92.239.25.70
http://whatismyipaddress.com/ip/192.168.0.1
http://whatismyipaddress.com/ip/92.235.208.101
http://whatismyipaddress.com/ip/92.236.252.132
http://whatismyipaddress.com/ip/85.15.190.49
... etc
6) I have to constantly open and close Mail after it hangs on sending. Says there is a connection problem on port 110 or whatever, but words fine as soon as I open again. This problem happens particularly when I want to send from my 2nd or 3rd POP or IMAP other than my normal one.
7) Slow Safari/Firefox and internet.
8) I got this strange warning about my IP changing recently when downloading a file:
http://oi53.tinypic.com/2z4b77o.jpg
9) My internet cuts out for large periods of time while the other PC desktop in my house works perfectly fine.
Well, any last suggestions much appreciated. Many thanks.
Message was edited by: Scottishengineer

I suppose your expanding battery problem could have caused some or all of these problems, but most of them sound like software issues.
If I were you I'd try a few things:
1. boot from your snow leopard install disk and repair your startup disk with disk utility.
2. repeat the repairs until no repairs are reported (the toilet paper principle).
3. repair permissions again.
4. if the problems persist, trash the preferences files for the misbehaving apps.
5. if the problems persist, delete the misbehaving apps and reinstall them.
6. it the shutoffs persist, try a PMU reset.
7. a PRAM reset would probably be a good idea too.
8. if none of that works, archive and reinstall.
there is a freeware utility called applejack that will also do most of this.
Details on all of these will be readily available with a google search.

Strange Problem in dynamically list population with record group

Hello Room,
I am dynamically populating a single list with 2 record groups. I am having a strange problem. All the code are written in 2 seperate buttons. The code of every button is given below.
Button 1 code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT companyname,to_char(co) from companymaster order by companyname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
Button 2 Code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT accountname,to_char(co) from accountmaster order by accountname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
The code is same here only the sql is different in these 2 buttons. Now the problem point.
when i press button 1, I get the list populated ok. when i try to click on the list item and keep the button pressed the list gets scrolled properly.
when i press button 2 after that i get account names well populated in the same list item as well, but this time, when i keep the button pressed the list does not scroll below as in button 1. It does not even allow to select different item from the list of button 2 code.
I tried to clear cache, cookies, exit browser everything and try to run the button 2 first, but still the problem in button 2 code.
Following are my system details.
windows 7 professional edition.
Oracle database 11g on windows 7
Oracle forms 10g patchset 10.1.2.0.2 on windows 7
Browser Netscape Navigator with oracle jinitiator 1.3.1.22
But this form is run by a client side html file where oracle forms 10g is not installed on windows xp. html file is just referring server url to run the module. The file is run on Netscape navigator browser with oracle jinitiator 1.3.1.22
My question is that is this a bug ? if button 1 gets the list item scrolled, why is the problem with button 2 even though i press it first. Here I am deleting the record group also. after the code is over. Initially I thought this may be the character length problem so I took the maximum character length for that list item as given by the 2 columns in database.
Why is the list scrolling not happening in button 2 but in button 1 with same codes on both ?
Anybody please help me.

The problem is the second query. I would guess that the TO_CHAR(co) is not unique for each account, but is the same for the accounts. And as the second item in the select-list is the listitems values, all your listitem-entries have the same value. therefore, of you select any entry, the list will always go the the first entry again.
Adjust your query.

N82, nokia maps2 strange problem!Delete maps

Similar Messages

Maybe you are looking for