N82 restarts whne i call speed dial (1)

Hi,
i set 1 as speed dial this code: *101#
It restarts my phone, when i want to call speed dial 1.
I can´t change or remove this number.
Pleas help me.

You didn't describe very well the problem. Although, i suggest you to try a soft reset.
Soft reset. In standby dial *#7370# and the phone's security code (the Nokia's default security code is 12345). Soft reset deletes ALL your phone's data.
If this post was helpful, please 'click' the Kudos! button.
If you want to thank someone, just click on the blue star at the bottom of their post

Similar Messages

I can no longer Dial my speed dial numbers by bluetooth after GB update....HELP

I can even deal with the fact that it erased my original speed dial settings. What I cannot deal with is the fact that BY LAW i must use a hands free device wihle driving but since the GB update I can no longer Dial my 9 speed dial numbers by Bluetooth. Trying to push the number and hold it for a few secs not only breaks the law and jepordizes my kids in the car . Here how it works ( or supposed to work. I push the button on my head set. It says " Say A Command ". I say Call speed dial 3. It repeats it back to me. I say Yes. It NOW dials the last number dialed. I never had this problem before the update.
Motorola Droid X now with Gingerbread updated OTA
Bluetooth is a Blueant Q1 with the App running on the Droid and updated to its latest firmware of 8.21
Help

Adam819 wrote:
I can even deal with the fact that it erased my original speed dial settings. What I cannot deal with is the fact that BY LAW i must use a hands free device wihle driving but since the GB update I can no longer Dial my 9 speed dial numbers by Bluetooth. Trying to push the number and hold it for a few secs not only breaks the law and jepordizes my kids in the car . Here how it works ( or supposed to work. I push the button on my head set. It says " Say A Command ". I say Call speed dial 3. It repeats it back to me. I say Yes. It NOW dials the last number dialed. I never had this problem before the update.
Motorola Droid X now with Gingerbread updated OTA
Bluetooth is a Blueant Q1 with the App running on the Droid and updated to its latest firmware of 8.21
Help
Food for thought: There is actually information released by the NTSB that even using "hands free" devices while driving have been proven to distract drivers.
As for the Bluetooth commands: I've never used "speed dial" I usually say "Call Nicole Mobile" and it will connect still with no problems.
I just tried to use the voice command "call speed dial 1" and it did not recognize it. It appears you must use the name now.

Speed dials

Hi all experts.
I have 2 questions kindly take time to answer them
1) All of you know, how we configure speed dials in mobile phones. We configure them on normal keypad, press the key 2 (for example) for few seconds, and the speed dial number gets dialed. Can we do the same in CUCM7.x or 8.x ?
2) With reference to the above question, what approach should i take to find the answer on my own ?, i downloaded cucm 7.0 administration guide and feature guide, but it hasnt shown how to configure speed dials :-(, how do you guys search for a specific feature ?
Thanks

I am going to assume by "mobile phones" you mean the 7921G or 7925G. Speed dials are a feature of that model and a referenced in the phone's documentation, not UCM. Cisco UCM has no feature called speed dials which is why you cannot find documentation on it. The closest that UCM comes is the speed dial line button type. The UCM-level features that are equivalent are :
Abbreviated dialing. You press a one- or two-digit index number representing the number you want to dial and then the AbbrDial soft key. This is a per-device setting (i.e. not global). These are configured by the user on the device using /ccmuser or the adminstrator by assigning a Speed Dial line button type to a device. If assigned to a free button it will act as a one-button speed dial. If you associate it beyond the available buttons, the index number shown to the left becomes its Abbreviated Dialing index.
Fast dials. These are Personal Address Book entries that you have configured as a fast dial through /ccmuser. They are accessed and dialed through the Personal Address Book service. These are per-user settings.
Translation patterns. Many other PBX systems have an explicit concept called Speed Dials that are globally available to all users. UCM doesn't bother with that feature because Translation Patterns can do that instead. Cisco just doesn't point this out very well. You can create a translation pattern that translates FROM anything TO anything. For example: *411 translates to +16085532447.

Regression PR1.1 Speed Dial : restart N8

After upgrade to PR1.1, when I use speed dial function the phone automatically restart.
How to use speed Dial work :
Go to call function :
Hit a number between (2 to 9) then hit big green button.
Best Regards

same here, no fix?
hope anna does not have this bug

"Temp Fail" with BLF Speed Dial + Call Pickup

Good day All,
I am running CUCM version 8.6.2 and many IP Phones 7962G.
I have a Manager configured with extension 1001 and his PA with extension 1002. Both extensions are configured in the same Call Pickup Group.
On the PA IP Phone, the second button is configured as a BLF Speed Dial with Call Pickup for the Manager.
When someone calls the Manager, she can see that the Manager Line is ringing but when she press the button in order to pick up that calls, she hear a busy tone and the IP Phone display a message that says "Temp Fail". I have checked every thing on both IP Phones and all seems to be correct. Am I missing something may be?
When I changed the Manager Line from 1001 to 1003, in the same Call Pickup Group, thats works fine. She is able to pick up calls for 1003. But on the CUCM Server, there is no such difference between extension 1001 and 1003.
Please advise.
Warm regards,
J. Kabundi.

Which PickUp group they belong doesn't matter, don't need to be the same for the BLF PickUp Feature.
But if they are in the same group as you mentioned: Can the pickup via the normal PickUp Softkey?
If changing only the Number makes it working i think you may have a problem with the DNs/Partitions. Ever renamed the partition? Try deleting the manager DN, remove the unassigned number from your server, and add it again.
If it still doesn't work... i would restart the whole server if possible.
Regards,
Sven

How can I set up a calling card on speed dialing?

I use a company calling card for international dialing. How can I set up a speed dial for the dial number and the password with a pause in between for the international number? Any clues?

speed dial: Your smartphone can store nine
phone numbers that you can call
with a single keypress. To store a
speed dial number, touch Phone
> Menu > Speed dial setup, and
insert a number in an empty speed
dial slot.
To call a speed dial number, touch
and hold the single-digit speed dial
number in the dialer screen.

DX650 cannot show caller ID name after speed dial is configured

Hi all,
Once I replaced my IP phone from CP-7975 with DX650, I found the incoming caller name display is missing for those caller phone numbers are configured as "one-button speed dial" on the DX650. For other callers calling to DX650, the caller name can be displayed correctly.
Anyone encounters this issue before and how to solve it?? Right now, DX650 is not mapped with the google account and other directory setting.
thanks,
samuel

Hello,
to resolve your issue go to home screen of DX650 and click Contact , then click serch icon , enter the name of contact and aftar that click copy in my Conctacts Button.
Rollback to phone icon in home screen of DX650 ,click add new speed dial then selec your contact , click save .
and make a test , your probleme we will resolved.
Regards

Personal speed dial override call restiction on CUCME

Hi All,
i need to allow call over PSTN to defined Personal speed dial list on a restricted Ip phone for local calls.
Anyone have a suggestion.

As long as they've got a button template with speed dials, they can go to http:///ccmuser then log in and put in their own speed dials.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_2/ccmcfg/b06phone.html

8945 speed dials while transferring calls

Hi all,
I've just deployed CM10.5.2.10000-5 with 8945's on SCCP894x.9-4-2-8.
All users are logged in with Extension Mobility.
When a user is transferring a call they can not get to their speed dials. I have set abbr dial as a button on the softkey template under "Off hook with Feature". the "Speed dial" button shows after the user hits the transfer key but once you press the speed dial button it just disappears.
Anyone else see this?
Thanks.

Hi Michael Masterson,
could be a release bug ... there is a 9.4(2)SR1 release, Feb 11,2015.
To download the new release, access this link.
Hope this helps.

7970 Line Appearance/Speed Dial Bar

I have about 10 7970?s that have applied a custom background image to. The custom background is white with colored text. Most of the phones display this correctly with the line appearance or assigned speed dial buttons readable with a solid gray bar and the button assignment in a white font. On three or four of the 7970?s you can not read the button assignment, the solid gray bar is missing and the white display text blends in with the logo. Where is the setting to change this? Why is it working on some but not all?
Thanks for the help

There are a couple of things you have to think about here. If you use the "idle" field the background is only going to show when the phone goes "idle". When the phone does go idle and the "default" background is being displayed, when a user receives a call they wont be able to see the caller id until they bring the phone out of "idle" status.
I would suggest that you follow the link in the previous post and just add your background to the list of available backgrounds, set it to the one that you want. One extra step though; after you follow the instructions you will need to stop and restart the "TFTP" service on the CCM before the phones will reflect the changes.

Just got U-verse today, how do I set up speed dialing on my phone, I had it with the ATT service, but it does not work with the UVerse

OK - I looked at the manual & see they made it major project. Instead of simply assigning tel numbers to each of the dialing digits, you have to build a directory record first, then you can assign the directory record to a dialing digit.
Looks like the simple part is using it - just press and hold the digit to dial the whole number.
So, it will take 40 minutes or so to break down the steps in understandable prose. It is too late to start now & i have a vet appointment in the am. All day is kind of full. But, I will try to do it tomorrow (thurs the 18th)

Seemed like there should be a speed dial, so I did a search & found the cure is worse than the disease -
Dial from your phone
Make calls directly from your existing touch-tone home phone:
Local calls: Dial the 7- or 10-digit phone number.
Long distance calls: Dial 1 + area code + 7-digit phone number.
International calls: Dial 011 + country code + 7-digit phone number.
Dial online from your myAT&T account
Call from your online Address Book or Call History, which shows a list of up to 100 of your most recent call records sorted by date and time:
Log in to myAT&T. Don't have a myAT&T login? Register today!
From the I want to menu, select Manage my plans and services and then Manage my phone features.
Your U-verse portal will open and a Make a Call box will appear on the left side of the page.
Enter a number to dial or select a number from your Call History or Address Book.
Specify whether you'd like to activate/deactivate Caller ID Blocking and Call Waiting for the call.
Select Place Call.
When your home phone rings, pick it up to place your call.
Important Note
To find numbers in the Call History, you can also sort numbers by missed, answered, outgoing, name, length of call, or type, or search for a specific call.
Dial from your U-verse TV
With U-verse TV, you can view a list of up to 100 of your most recent incoming call records by date and time on your TV screen. Use your U-verse TV remote to tune to your Call History and return calls with the press of a button.
Tune to Channel 9900 using your U-verse TV remote.
Select a U-verse Voice phone number on screen.
Press OK to view a log of answered and missed calls. You can sort by name, date, and phone number.
Scroll using the arrows.
Select a number and press OK to return a call.
Select Call and press OK.
When your home phone rings, pick it up to place your call.
You can have a call list accesed from a browser.
You can call back a historical call from the browser or TV.
https://www.att.com/esupport/article.jsp?sid=KB401002

Speed Dial is replaced by another program instead of the program opening in a new tab. How to resolve?

I have been using Speed Dial for a long time and when I click on a button, usually a new page opens, leaving Speed Dial available. Recently, every time I click on a Speed Dial button, the new page opens in place of Speed Dial. If I want Speed Dial again, I have to back up page by page or restart Firefox. This has only happened recently and is very annoying. Any help will be appreciated. thanks.
Also finally remembered that instead of clicking on the speed dial icon, I can right click on it and click on "new tab". That way it will come up in a new window. This is not the way it always worked. Wonder why the change?

If you have a mouse with a scroll wheel then you can usually click that button to get a middle click.<br />
If you still have a mouse with only two buttons then you can consider to buy a new mouse with a scroll wheel as that makes scrolling a lot easier and also make use of Firefox features regarding a middle click.<br />
Most mouse drivers also allow to emulate such a middle click by pressing both mouse buttons at the same time.

Unable to Edit Number Locked In Speed Dial Position

All my Speed Dial listings were ported over to a new 8900 from an 8300. I also changed carriers. Coincidentally, I had my old carrier's voice mail access number programmed into the "W" position in the Speed Dial list on the 8300. That number is now in the "W" position on the 8900, which is the default position for the voice mail access number on the 8900. I am unable to delete the old number so I can enter my new carrier's voice mail access number. There is no EDIT option for that position, but the EDIT option is available for all other numbers in my Speed dial list EXCEPT the position Q, which has a default feature "Change Profile to Vibrate." It would be nice to know how to delete that feature, too. Can anyone help?

There are three keys preassigned
A Lock System
Q Change to vibrate
W Voicemail
You can change this ones, but if for any reason you reset the device, the preassigned keys come back
To change this go to phone, press menu, view speed dial list, go to the A (for ex), press enter, and choose the contact you want.
Remember to create a new contact called Voicemail or something like that to change the Voicemail Key.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

5800 - cannot speed dial and dial from handsfree c...

I verified the following behaviour of the new 5800 which seems to me to be a bug, because it works on other nokia series 60 phones:
Because I synchronize my phonebook with MS Outlook, phone numbers have the syntax "+43 (1) 9876543". These phonebook entries can be dialed without problems when I call using the phonebook.
But if I use the speed dialing feature (press and hold e.g. key "2" ), I get the message "Nicht gestattet" (German, means "not allowed" ), and the number is not dialed. If I delete the spaces and the brackets, dialing is possible without problems.
The same behaviour can be seen if I try to dial from my built in handsfree set in my car with numbers as described above.
Before the 5800 I used a E65 and a 6120c, there the syntax described above worked without problems.
Software: v11.0.008.red.01
Any clues?
Best regards,
Thomas
Message Edited by tez1 on 04-Feb-2009 11:52 AM

magpie68 wrote:
FIX...
I got this, I found out it happened when the number has spaces in it.
Try cleansing the number of all spaces and punctuation (and prefix with +country code)
This works for me.
Alan
Sorry, this is no fix, this is a workaround. It is clear, that this will avoid the problems. But PIMs like MS Outlook create phone numbers in this format; after synchronization with my phone, there are spaces in all of the phone numbers. Therefore I suggest, Nokia implements this like for all other S60v3 phones. This would be the only fix. Regards, Thomas.

Q10 speed-dial and texting issues

Hi there,
I am setting up a q10 for my wife, and i also have one.
I cannot do speed dial on my q10. I have two brand new identical devices and one can do speed dials, and one cant.. I can set up the speed dials, but it doesnt activate when i do a longpress.
Also when i longpress a number in my call log it doesnt give me the option of sending a text, whereas my other devices does.
Also when i play a song it deosnt give me the choice to add that song as a ringtone whereas it gives me that choice and other choices on my other device.
My questions are:
Is there a way i can restore some defaults to have these features, or change options so i can have these same features that i have on my idetical device.
or is the second devices faulty> Seems odd that it would be as its brand new.

Hi Husam,
Thank you for your questio. However this community is for Cisco Small Business Products and the PLW400 is a Linksys product. Here is the area that may help you further with your question. http://support.linksys.com/en-us/support/powerline/PLW400
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport

N82 restarts whne i call speed dial (1)

Similar Messages

Maybe you are looking for