N82, sys ver 20.0.062: Alarm clock does not work o...

Anyone had this problem? Alarm just does not come up on "some" days .. Not sure why, but I regularly (once a week) notice that it just does not want to work sometimes, and restarting the system does not help.
Normally, when you set alarm, message pops up saying how many hours you have left till alarm.. And on some cases it does not, and alarm never happens when you want to to be (annoying if you setting alarm for work on Monday morning but it does not come up).
I've tried restarting phone, resetting all alarms, delete/create new alarms, nothing, n o t h i n g helps. The next day it suddenly starts working again..
I've carefully checked all settings (like, work days only, etc..)
but found nothing to explain this problem.

Unable to set weekly alarm for my nokia 5320, any idea..? once save the day turns to other day....
Als o sometime do experience the ringing become very very very very soft... and need a reset of the phone to make it normal... Nokia, what happen to the software/firmware... so far trying to update the version but no latest version for Nokia 5320...
Pls assist... thanks thanks tahsnk...

Similar Messages

My iPhone alarm clock is not working. Anyone else?

My iPhone alarm clock is not working. I have the latest software: 6.2.1. I set my alarm at 11:30 pm to go off at 12:30 am and 3:30 am, neither went off. I actually wok up right before 3:30, open up the clock app to see if my alarm was on and both the alarms were set to off. I have been having trouble with alarms similarly the last week or so.

Hi Homer,
I would suggest a re-install of the iPhone to fix this issue.
Make sure to do a full backup of the iPhone before you do this otherwise you may lose some of your data
Joe

Iphone 5c clock does not work while asleep

done hard reset updated on and off set automatically time but it works while the device is in use

iphone 5c clock does not work while asleep
I have to ask how you know... does it show the right time before you go to sleep? When you wake up?

WINDOWS 8.1 ALARM CLOCK DOES NOT HAVE SOUND

WINDOWS 8.1 ALARM CLOCK/TIMER DOES NOT HAVE SOUND

Hi:
Works fine for me.
The machine need to be ON for the alarm to be heard & sound/speakers needs to On & Volume turned up to audible level.
Laptop can be in sleep mode but not powered off.
Try right clicking on the speaker icon. This should open a window that is titled "Sound". When you select the playback tab -> it will show icons of the audio devices you have connected to your computer.
You will need to select your stereo speaker device and then click the button "Set Default". This should enable your stereo speakers to play the sound.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Alarm Clock 2 not working, any suggestions? Help!

Hi everyone,
Alarm Clock 2 didn't wake me up this morning, I tested it, and it seems like the clock on the computer is going to sleep when the computer goes to sleep! Are there any free alarm clock programs out there that work with mountain lion?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

PUSH NOTIFICATIONS CAUSE ALARM CLOCK TO NOT WORK?

Beware: If you have push notifications turned on and you are using your iPhone's alarm clock as your personal morning alarm clock.. you could be in trouble sometime in the near future.
I've noticed this happening with the AP app: If the AP app sends me a push notification during the night when I'm asleep and I don't happen to wake up and clear the push notification.. than when the time comes for my Alarm to go off at 4:45AM Mon-Fri... because the push notification is sitting 'in front' waiting to be cleared, the alarm doesn't actually go off until you clear out the push notification that is in front of it. This has caused me to be late for work twice before I realized what happened.. so until Apple provides a bug fix for this, I had to turn all push notifications OFF.
Please fix this Apple!

wow. that's a really interesting observation, CTU agent.
i'm having a similar problem -- my alarms, which previously have worked flawlessly, have stopped working. realizing this, i opened alarm clock and saw that all 3 of them were all set to "off." i never did that, myself. but, ok.... so, i turned them all back on.
today, one was supposed to go off at 3pm -- but it didn't. just now (7pm), i opened the alarm clock and noticed that the 3pm alarm was set to "off," again! but i hadn't even opened the clock app since turning them all on, yesterday.
so, something, is causing them to turn off! your theory about push notifications is an interesting one. i'll see if this has any effect on my phone and report back.
either way, this is painful, because i've come to rely upon the iphone for these alarms, since it's always with me. i don't want to have to start wearing a watch that has an alarm, just because the iphone's alarms have stopped working. i hope this issue is identified and fixed pronto.

Is there a way to go back to previous version of software as I don't like vers 1.1. Restoring it does not work and it turns off all the time after around 10 secs

Is there any way to go back to prvious version of software befoe 1.1 on ipod nano 6th generation. After update it switches off all the time after about 10 secs and I preferred it when I could listen to songs when in sleep mode without using too much battery power

Peter,
That was the problem. They were there, just not properly linked. I used the one I completed in CS6 trial version (after preflight). When I exported that one and opened it in CS5 all was good. I think I will make the upgrade as soon as I can afford it, but at least now I can make the system work for my needs. Thank you for your help!

My iphone 5 clock is not working properly. I've tried to reset it, and update the clock automatically and manually, and the time is still off. My alarms aren't working because of this, and I need my phone to work properly.

My iphone 5 clock is not working properly. I've tried to reset it, and update the clock automatically and manually, and the time is still off. My alarms aren't working because of this, and I need my phone to work properly.

Automatic time is a function of your Wireless carrier. Your post indicates that your iPhone (5 or 5c) is running iOS 7.0.6. The current version is 7.1.1. You might try updating your device to the current iOS version.
HTH

Alarm Clock won't work. Please Help!

My alarm clock won't work. When I set it to the time and it goes off , the sound does not come on. Can someone please help me.

I have the same problem. The iPod is only a week old and the alarm worked on 30th of December, but today (1st of January) it has refused to work.
I've tried restarting the iPod, force quitting the clock, changing time zone and I've even tried setting an hour ahead & behind, in case the problem was connected with the daylight savings setting on my Mac.
The alarm won't work and I'm stumped!
Edit: just found this on another thread about this very subject...
http://mashable.com/2011/01/01/iphone-clock-bu/
Message was edited by: Graham.R

I have had my iphone 4 for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

i have had my iphone 4s for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

The app "alarm clock with pandora radio" does not work and i cant get any help with it i want my money back

I have tried to get info on this app and it does not show up on the app store any longer so i cant contact the developer about this app for support. it does not work and i feel i was cheated out of my money for an app that was supposed to play pandora when the alarm goes off but it does nothing. i need help with this.

As stated All purchased are final.
Use the e-mail receipt to Report a problem or
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Spinning beach ball in menu bar, sys pref does not work etc

Since last 2 days I have the following problem with Macbook:
1. When i hover the cursor over the menu bar, the beach ball appears. this is for the Mac menu items such as Airport, Spotlight, Fast switching, time & date and also for iStatmenus. However, Little Snitch menu bar indicator is not affected
2. Sysprefs also does not work. It opens up and immediately the beach ball appears and I can't click on any of the sys preferences
3. If i try to watch a video, then the video will not display, though the progress indicator will happily be progressing away (QT, VLC etc)
4. When i run in Safe mode, then everything seems to work ok (at least the menu bar, though the video part still doesn't work)
5. And also in Normal mode, Safari/Netscape Navigator/Camino et al hang & the beach ball appears, but in safe mode they work ok though very sluggish.
6. Though i can't be certain, I think all these problems began after iTunes crashed on me while running a podcast (?)
I have tried everything; repair prefs and repair disk, have run Tinkertool system2 to see if that would help but to no avail. I even downloaded and installed OS X 10.6.7 Combo update-didn't do any good.

I have been trying to deal with the same problem for the last week.
My machine is a MBP 17" 4 GB 2.6GHz, 250 GB alluminum.
1) I've immigrated my whole user apps and doc files to an IMAC 20" 2GB 2.66GHz 350 GB, and the system works just fine on the IMAC (I am using my system that used to be in the MBP right now).
2) I've over written everything on the HD with zeros and have done a clean install of SNOW LEOPARD on my MBP, but as the system got loaded, already before any working files or app files have been reinstalled, the spinning beach ball appears on the upper RIGHT portion of the menu bar and makes the system inoperable.
3) Done system update and made it into a 10.6.8 but the problem persists.
I've basically done what Ravindra had tried.
Please HELP.

Simple floating clock does not appear after shut down

Hi,
On my iMac oxs 10.9.4. my simple floating clock does not appear after shut down.
Can anybody tell me how to overcome this?
Cheers

And now I am at the stage it wont automatically start despite it being ticked in the Log In Items.
As Imp68 has asked, do you mean the "Hide" Checkbox is selected?
If you have checked the box, that says, to start the application, however, hide it so it is not visible when you start.
If you run Applications -> Utilities -> Activity Monitor, can you find Simple Floating Clock as a running app? (Activity Monitor has a Search box to make this easier).
Is Simple Floating Clock on your Menu bar?
Is Simple Floating Clock set to float?

I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren

en

I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

My iPhone's sound does not work except for the alarm and the volume bar is not there.

Hi, thank you in advance if you can help.
When my iphone 4 is not plugged in to headphones the sound does not work, and if I try to adjust the sound with the plus and minus buttons in the side it comes up like normal saying "Ringer" but then there is no bar underneath it. Sometimes the sound will work for a couple of minutes. However, there is definitely no problem with the speaker as the alarm always works perfectly fine.
I have tried restoring it, this did not help.

what you could even try is to write down a few contacts that you would need to get through a single day, restore it to factory, punch in those few odd contacts,
No. What he should be doing is syncing his contacts to an app on his computer or cloud service, then sync them back to the phone (without restoring the backup).
Never rely on the backup for contacts. The contact info stored there may be incomplete and is only meant to maintain the recent calls and favorites lists.

N82, sys ver 20.0.062: Alarm clock does not work o...

Similar Messages

Maybe you are looking for