N82 System error on clock

Hello,
I have just recently purchased a Nokia N82. I didn't get a new number, so I use the same SIM card as I used in my Sony Ericsson. The phone seemed to function allright, but when I asked my phone company to send me the settings for my N82, I received an SMS which I downloaded something from.
After this, I cannot enter my clock anymore - when I try and open it to adjust my alarm clock it is impossible. Since I use my cellular as an alarm clock in the morning this is of course quite a predicament, as I don't have it set at the correct time yet..!
What can I do? Is it solveable?

If you applied the settings you received, deleting the text message containing them isn't going to have any effect.
Note that all these operations but the first will wipe your phone's internal memory so do a backup before proceeding.
First option: revert to factory defaults . Dial *#7780#.
Second option: soft reset. Dial *#7370#.
Third option: hard reset. Switch the phone off and do the following.
1) Press and hold the green "call", "3" and "*" buttons.
2) With those buttons pressed down, switch the phone on.
3) Keep pressing those 3 buttons and only release them once the phone shows signs of life such as the Nokia "hands" logo or the language selection screen.
If you're prompted for a security code, the default on all Nokia phones is 12345 (unless you changed it, in which case you should know what it is).
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • N95 Clock System Error

    My N95 has suddenly started giving me a "System Error" when I try to access either the Clock program or the Time and Date update page from the Tools menu. Otherwise the phone works normally and displays the correct time and date on the display during normal operation.
    I have tried to perform a "Factory Reset" and this does seem to cure the problem, but the error returns as soon as I perform a Memory Restore using the Nokia PC Suite backup/restore utility.
    Is there any way to cure this problem without losing all my data and having to re-enter it again manually??
    Regards

    03-Dec-2007 04:25 PM
    n95_pilot wrote:
    My N95 has suddenly started giving me a "System Error" when I try to access either the Clock program or the Time and Date update page from the Tools menu. Otherwise the phone works normally and displays the correct time and date on the display during normal operation.
    I have tried to perform a "Factory Reset" and this does seem to cure the problem, but the error returns as soon as I perform a Memory Restore using the Nokia PC Suite backup/restore utility.
    Is there any way to cure this problem without losing all my data and having to re-enter it again manually??
    Regards
    try to get the latest N95 software, ya know NSU...

  • Mail for Exchange "System error" try it later N82

    Hi dudes,
    I´ve installed Mail for Exchnage on my N82 and it worked properly, but since some weeks I´ve the following problem:
    Synchronising with the server, Mail synch works, but then calendar, contact synch faild with the message "System error, please try again later".
    If I´m focring a complte resynch of all items that works, but this is the only chance to get my caldenar and contacts synched. Does anyone has an idea who to fix that, or is it a problem on the excahnge server?
    Thanks a lot,
    Rs Oliver

    Hi, I was experiencing the same issue with MfE on my N96. For info I am using N96 firmware 30.033 (latest) and MfE 2.09.158 (listed on their site as 2.9.158). I have managed to solve it, but in a really clumsy way. I'm hoping someone with more knowledge of these things can provide a more elegant solution. I have tried removing recurring appointments, and doing a full re-sync as suggested in some threads, but that didn't work.
    Firslty, I noticed that contacts and email would sync no problem, and it was the calendar sync that was causing the issue. I created another pst data file, and copied all my calendar appointments to it, then erased all of the appointments on the exchange server. I did a sync, and it worked fine.
    I then copied just one appointment over to the server. This time the sync failed.
    Thinking it might be this appointment, I copied another over and deleted the first. The sync still failed.
    I had read that it is sometimes something to do with recurring appointments (I have no recurring appointments on my calendar) so as a long-shot I opened the solitary apointment added a reccurence to it, removed the reccurence again and saved it. What do you know, it synced!
    I then copied 10 more appointments across, and the sync failed again. I went through each one, added a recuurence and removed it and the sync worked great. You only have to do this as far back in your calendar as you sync, i.e. if you sync appointments back 1 month just add and remove reccurences for every appointment back 1 month (and every appointment in the future) and the sync should work ok.
    I know this isn't a solution if your future calendar is amazingly full (I have around 300 appts in the fututre, and it took me about an hour to do) but at least I can now get it to sync. If anyone has a more sensible way of doing this, or if this post helps you out please leave a comment.
    Thanks.
    PS. Just to let you know, I also had the same issue with RoadSync, so it isn't a problem with MfE, but it seems to be a very weird thing with Outlook. This 'solution' got the sync working with both RoadSync and MfE.
    Message Edited by djbog on 05-Jul-2009 02:16 PM

  • "System Error" when accessing Clock - 6110 Navigat...

    Hi all,
    Did a software upgrade last week using the Nokia update software.
    Said it all worked fine, but now, when I try and access the Clock to change alarms, etc. I get a message saying "System Error"
    I've reset to factory defaults and done another update but no joy.
    HELP!!
    DaveA

    This probably means that corrupt data concerning the clock or alarm was backed up and restored.
    Do the backup with PC Suite, reformat the phone again, and restore only the data that you know you need (example, contacts, messages etc.), don't leave all boxes ticked on the restore.
    You need a fairly recent version of PC Suite to do the partial backup/restore, the latest is at www.nokia.com/pcsuite.

  • System error 86 while mapping c$

    Hi, thanks for your time. I'm having the next issue:
    I work on a domain network. Usually, we image computers and then join them to a domain.
    However, i find it impossible to do anything to an unjoined computer because i get system error 86. Im trying to map c$ from my computer (which is in a domain) with the local administrator credentials from the other computer. The command goes like this:
    net use k: \\ipaddress\c$ password /u:localadmin
    output:
    System error 86 has occurred.
    The specified network password is not correct
    I have checked many times the local administrator password and im typing it right, i have disabled the firewall, i have run all the services on the computer, and enabled netbios. Nothing works.
    The problem is not exactly trying to map c$, i have noticed that once i'm able to map this drive, i can also connect to WMI on this machine from a remote computer. The objective of this is that i'm trying to run a couple of powershell scrits that involve
    getting a wmi-object from a remote computer (this doesnt work either because i get ACCESS_DENIED using local admin credentials from  the machine im trying to access.).
    Im doing this from a Win7 machine to a XP machine. I've tried XP to XP but it doesnt work either.
    gustavo morales IT department - Desktop Support

    OK, I had this problem this morning, and I couldn't find a good answer, including this thread. I'm hoping that giving a thorough answer will help others.
    scenario:
    You have a computer in a domain (like your work computer). you would like to connect to a workgroup computer and see its files (like your home computer). you cannot browse to the computer and if you try to map the network path you get "system error 86" or system
    error 1326". (To map the network path you may try NET USE \\computername\path password /USER:computername\username)
    resolution:
    To troubleshoot this please try to setup the ideal setup first. Once you have it going you can change to settings you like:
    1. disable the workgroup/home computers firewall
    you need to do this since both file sharing and kerberos can be stopped by the firewall
    2. turn on file sharing on the workgroup/home computer on the network card used
    3. create an administrator account on the workgroup/home computer that has the same username AND password as your domain useraccount on the domain computer
    4. on your workgroup/home computer, start local security policies secpol.msc and turn on
    a) local policies:audit policy: audit account login events: failure
    b) security options: Network security: LAN Manager authentication level: Send LM & NTLM - use NTLMv2 session security if negotiated
    c) network access:sharing and security model for local accounts : Classic
    5. Make sure both computer clocks are showing correctly
    Hope this helps 

  • Share Online- System error -34

    Hallo,
    if I want to upload pictures to Ovi store from my Nokia N82 ( by aplication Share Online) there is a System error -34 and I can´t upload my images   Only when I come home and I am on Wlan it works.
    If I want to upgrade my Share online, I can´t because it is built-in unit . What can I do or how can I upgrad built-in units in my phone. For example the same thing do Maps if I want to upgread them.

    Nevermind it works now you can delete this post

  • Error: [-9045]: System error: BD Root check

    Hi all,
    I have a MaxDB 7.6.0.37 running on SLES10 based on VmWare ESX 3.0
    The Database is a small test database which is in ONLINE state an can be easily switch OFFLINE/ADMIN/ONLINE all the way.
    I do an SELECT statement thru the SQL Studio and got correct result tables shown.
    I do the same thing via JDBC an get an Error: [-9045]: System error: BD Root check. The FAQ told that it may be an hardware error, but since we are on a vmware plattform, there can't be a real hardware error.
    What does this error mean and how could I solve them ?
    I tried to recover from backup but that doesn't work.
    Regards,
    Dirk

    Date       Time       TID Typ MsgID Label    Message-Text
    2008-05-13 16:35:55 18829     12781 INFO              Version:       'Linux thread implementation is more POSIX compliant (NPTL)'
    2008-05-13 16:35:55 18829     12781 INFO              Version:       'Linux thread implementation allows setting of individual thread stack size'
    2008-05-13 16:35:55 18832     12821 TASKING  Thread 18832 starting
    2008-05-13 16:35:55 18829     12600 VERSION  'Kernel    7.6.00   Build 037-121-149-748'
    2008-05-13 16:35:55 18829     12600 VERSION  'X32/LINUX 7.6.00   Build 037-121-149-748'
    2008-05-13 16:35:55 18829     12769 INFO     Starting SERVERDB:      'SAPDB02A'
    2008-05-13 16:35:55 18829     12770 INFO              SERVERNODE:    'sapdb02'
    2008-05-13 16:35:55 18829     12773 INFO              Date:          2008-05-13
    2008-05-13 16:35:55 18829     12771 INFO              Process ID:    18829
    2008-05-13 16:35:55 18829     12772 INFO              Owner:         'sdb'
    2008-05-13 16:35:55 18829     12772 INFO              Group:         'sdba'
    2008-05-13 16:35:55 18829     12781 INFO              Version:       '32BIT Kernel'
    2008-05-13 16:35:55 18829     12781 INFO              Version:       'X32/LINUX 7.6.00   Build 037-121-149-748'
    2008-05-13 16:35:55 18829     12781 INFO              Version:       'FAST'
    2008-05-13 16:35:55 18829     12806 INFO              Machine:       'i686'
    2008-05-13 16:35:55 18829     12775 INFO              Processors:       1
    2008-05-13 16:35:55 18829     12780 INFO              Current directory:         '/var/opt/sdb/data/wrk/SAPDB02A'
    2008-05-13 16:35:55 18829     12780 INFO              LD_LIBRARY_PATH: '/opt/sdb/7600/lib:/opt/sdb/7600/sap'
    2008-05-13 16:35:55 18829     20233 RTE      Dump of all kernel parameters start
    2008-05-13 16:35:55 18829     20206 RTE      Using mode NORMAL for data volume 1
    2008-05-13 16:35:55 18829     20234 RTE       ADMIN=1
    2008-05-13 16:35:55 18829     20234 RTE       AKDUMP_ALLOWED=YES
    2008-05-13 16:35:55 18829     20234 RTE       ALLOW_MULTIPLE_SERVERTASK_UKTS=NO
    2008-05-13 16:35:55 18829     20234 RTE       AUTHENTICATION_ALLOW=
    2008-05-13 16:35:55 18829     20234 RTE       AUTHENTICATION_DENY=
    2008-05-13 16:35:55 18829     20234 RTE       AUTOSAVE=1
    2008-05-13 16:35:55 18829     20234 RTE       AUTO_RECREATE_BAD_INDEXES=NO
    2008-05-13 16:35:55 18829     20234 RTE       BACKUPRESULT=1
    2008-05-13 16:35:55 18829     20234 RTE       BACKUP_BLOCK_CNT=64
    2008-05-13 16:35:55 18829     20234 RTE       BACKUPHISTFILE=dbm.knl
    2008-05-13 16:35:55 18829     20234 RTE       BACKUPMED_DEF=dbm.mdf
    2008-05-13 16:35:55 18829     20234 RTE       CACHE_IN_SHARED_MEMORY=NO
    2008-05-13 16:35:55 18829     20234 RTE       CACHE_SIZE=10000
    2008-05-13 16:35:55 18829     20234 RTE       CALLSTACKLEVEL=0
    2008-05-13 16:35:55 18829     20234 RTE       CATCACHE_MINSIZE=262144
    2008-05-13 16:35:55 18829     20234 RTE       CAT_CACHE_SUPPLY=3264
    2008-05-13 16:35:55 18829     20234 RTE       CHECKDATA=1
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_BACKUP=NO
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_COMMON=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_CONVERTER=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_DATACACHE=NO
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_DATAINDEX=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_DATAPAGELOG=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_FBM=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_HASHED_RESULTSET=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_IOMAN=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_KB_REGIONS=NO
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_LOCK_SUPPLY=NO
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_LOCK=NO
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_LOGHISTORY=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_LOGPAGE=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_LOGTRANS=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_LOGVOLUME=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_REGIONS=NO
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_SRVTASKS=0
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_TABLE_WIDTH=NO
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_TASK_SPECIFIC_CATALOGCACHE=NO
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_TRANSLIST=NO
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_TREE_LOCKS=NO
    2008-05-13 16:35:55 18829     20234 RTE       CHECK_TREE=NO
    2008-05-13 16:35:55 18829     20234 RTE       CLUSTERED_LOBS=NO
    2008-05-13 16:35:55 18829     20234 RTE       CLUSTER_WRITE_THRESHOLD=80
    2008-05-13 16:35:55 18829     20234 RTE       COLUMNCOMPRESSION=YES
    2008-05-13 16:35:55 18829     20234 RTE       _COMMENT=
    2008-05-13 16:35:55 18829     20234 RTE       CONTROLPASSWORD=***
    2008-05-13 16:35:55 18829     20234 RTE       CONTROLUSERID=DBM
    2008-05-13 16:35:55 18829     20234 RTE       CONVERTER_REGIONS=8
    2008-05-13 16:35:55 18829     20234 RTE       DATABASEFULL=1
    2008-05-13 16:35:55 18829     20234 RTE       DATACACHE_RGNS=8
    2008-05-13 16:35:55 18829     20234 RTE       DATA_IO_BLOCK_COUNT=64
    2008-05-13 16:35:55 18829     20234 RTE       DATA_VOLUME_GROUPS=1
    2008-05-13 16:35:55 18829     20234 RTE       DATA_VOLUME_MODE_0001=NORMAL
    2008-05-13 16:35:55 18829     20234 RTE       DATA_VOLUME_NAME_0001=/dev/raw/raw1
    2008-05-13 16:35:55 18829     20234 RTE       DATA_VOLUME_SIZE_0001=64000
    2008-05-13 16:35:55 18829     20234 RTE       DATA_VOLUME_TYPE_0001=R
    2008-05-13 16:35:55 18829     20234 RTE       DATE_TIME_FORMAT=INTERNAL
    2008-05-13 16:35:55 18829     20234 RTE       DBFILLINGABOVELIMIT=70L80M85M90H95H96H97H98H99H
    2008-05-13 16:35:55 18829     20234 RTE       DBFILLINGBELOWLIMIT=70L80L85L90L95L
    2008-05-13 16:35:55 18829     20234 RTE       DDLTRIGGER=YES
    2008-05-13 16:35:55 18829     20234 RTE       DEADLOCK_DETECTION=4
    2008-05-13 16:35:55 18829     20234 RTE       DEFAULT_CODE=ASCII
    2008-05-13 16:35:55 18829     20234 RTE       DELAYCOMMIT=NO
    2008-05-13 16:35:55 18829     20234 RTE       DELAYLOGWRITER=0
    2008-05-13 16:35:55 18829     20234 RTE       DIAG_HISTORY_NUM=2
    2008-05-13 16:35:55 18829     20234 RTE       DIAG_HISTORY_PATH=/var/opt/sdb/data/wrk/SAPDB02A/DIAGHISTORY
    2008-05-13 16:35:55 18829     20234 RTE       DIAGSEM=0
    2008-05-13 16:35:55 18829     20234 RTE       DWIO_AREA_FLUSH=50
    2008-05-13 16:35:55 18829     20234 RTE       DWIO_AREA_SIZE=50
    2008-05-13 16:35:55 18829     20234 RTE       DWLRU_TAIL_FLUSH=25
    2008-05-13 16:35:55 18829     20234 RTE       DYNTASK_STACK=NO
    2008-05-13 16:35:55 18829     20234 RTE       ENABLE_CHECK_INSTANCE=YES
    2008-05-13 16:35:55 18829     20234 RTE       ENABLE_SYSTEM_TRIGGERS=YES
    2008-05-13 16:35:55 18829     20234 RTE       ERROR=3
    2008-05-13 16:35:55 18829     20234 RTE       _EVENTFILE=knldiag.evt
    2008-05-13 16:35:55 18829     20234 RTE       _EVENTSIZE=0
    2008-05-13 16:35:55 18829     20234 RTE       EVENT=1
    2008-05-13 16:35:55 18829     20234 RTE       EXPAND_COM_TRACE=NO
    2008-05-13 16:35:55 18829     20234 RTE       EXTERNAL_DUMP_REQUEST=NO
    2008-05-13 16:35:55 18829     20234 RTE       FBMLOW_IO_RATE=10
    2008-05-13 16:35:55 18829     20234 RTE       FBM_VOLUME_BALANCE=10
    2008-05-13 16:35:55 18829     20234 RTE       FBM_VOLUME_COMPRESSION=50
    2008-05-13 16:35:55 18829     20234 RTE       FILEDIR_SPINLOCKPOOL_SIZE=10
    2008-05-13 16:35:55 18829     20234 RTE       FORBID_LOAD_BALANCING=YES
    2008-05-13 16:35:55 18829     20234 RTE       FORMATTING_MODE=PARALLEL
    2008-05-13 16:35:55 18829     20234 RTE       FORMAT_DATAVOLUME=YES
    2008-05-13 16:35:55 18829     20234 RTE       HASHED_RESULTSET_CACHESIZE=262144
    2008-05-13 16:35:55 18829     20234 RTE       HASHED_RESULTSET=YES
    2008-05-13 16:35:55 18829     20234 RTE       HEAP_CHECK_LEVEL=0
    2008-05-13 16:35:55 18829     20234 RTE       HIRES_TIMER_TYPE=CPU
    2008-05-13 16:35:55 18829     20234 RTE       HS_STORAGE_DLL=libhsscopy
    2008-05-13 16:35:55 18829     20234 RTE       HS_SYNC_INTERVAL=50
    2008-05-13 16:35:55 18829     20234 RTE       IDXFILELIST_SIZE=2048
    2008-05-13 16:35:55 18829     20234 RTE       INDEX_LEAF_CACHING=2
    2008-05-13 16:35:55 18829     20234 RTE       INIT_ALLOCATORSIZE=258048
    2008-05-13 16:35:55 18829     20234 RTE       INSTANCE_TYPE=OLTP
    2008-05-13 16:35:55 18829     20234 RTE       IOPROCSFOR_PRIO=0
    2008-05-13 16:35:55 18829     20234 RTE       IOPROCSFOR_READER=0
    2008-05-13 16:35:55 18829     20234 RTE       IOPROCSPER_DEV=2
    2008-05-13 16:35:55 18829     20234 RTE       IOPROCSSWITCH=2
    2008-05-13 16:35:55 18829     20234 RTE       JOIN_MAXTAB_LEVEL4=16
    2008-05-13 16:35:55 18829     20234 RTE       JOIN_MAXTAB_LEVEL9=5
    2008-05-13 16:35:55 18829     20234 RTE       JOIN_SEARCH_LEVEL=0
    2008-05-13 16:35:55 18829     20234 RTE       JOIN_TABLEBUFFER=128
    2008-05-13 16:35:55 18829     20234 RTE       _KERNELDIAGFILE=knldiag
    2008-05-13 16:35:55 18829     20234 RTE       KERNELDIAGSIZE=800
    2008-05-13 16:35:55 18829     20234 RTE       _KERNELDUMPFILE=knldump
    2008-05-13 16:35:55 18829     20234 RTE       _KERNELTRACEFILE=knltrace
    2008-05-13 16:35:55 18829     20234 RTE       KERNELTRACESIZE=710
    2008-05-13 16:35:55 18829     20234 RTE       KERNELVERSION=KERNEL    7.6.00   BUILD 037-121-149-748
    2008-05-13 16:35:55 18829     20234 RTE       LOAD_BALANCING_CHK=0
    2008-05-13 16:35:55 18829     20234 RTE       LOAD_BALANCING_DIF=10
    2008-05-13 16:35:55 18829     20234 RTE       LOAD_BALANCING_EQ=5
    2008-05-13 16:35:55 18829     20234 RTE       LOCAL_REDO_LOG_BUFFER_SIZE=0
    2008-05-13 16:35:55 18829     20234 RTE       LOCKSUPPLY_BLOCK=100
    2008-05-13 16:35:55 18829     20234 RTE       LOGABOVELIMIT=50L75L90M95M96H97H98H99H
    2008-05-13 16:35:55 18829     20234 RTE       LOGFULL=1
    2008-05-13 16:35:55 18829     20234 RTE       LOGSEGMENTFULL=1
    2008-05-13 16:35:55 18829     20234 RTE       LOG_BACKUP_TO_PIPE=NO
    2008-05-13 16:35:55 18829     20234 RTE       LOG_IO_BLOCK_COUNT=8
    2008-05-13 16:35:55 18829     20234 RTE       LOG_IO_QUEUE=50
    2008-05-13 16:35:55 18829     20234 RTE       LOG_MIRRORED=NO
    2008-05-13 16:35:55 18829     20234 RTE       LOG_QUEUE_COUNT=1
    2008-05-13 16:35:55 18829     20234 RTE       LOG_SEGMENT_SIZE=10666
    2008-05-13 16:35:55 18829     20234 RTE       LOG_VOLUME_NAME_001=/dev/raw/raw2
    2008-05-13 16:35:55 18829     20234 RTE       LOG_VOLUME_SIZE_001=32000
    2008-05-13 16:35:55 18829     20234 RTE       LOG_VOLUME_TYPE_001=R
    2008-05-13 16:35:55 18829     20234 RTE       LRU_FOR_SCAN=NO
    2008-05-13 16:35:55 18829     20234 RTE       MAXBACKUPDEVS=2
    2008-05-13 16:35:55 18829     20234 RTE       MAXCPU=1
    2008-05-13 16:35:55 18829     20234 RTE       MAXDATAVOLUMES=11
    2008-05-13 16:35:55 18829     20234 RTE       _MAXEVENTS=100
    2008-05-13 16:35:55 18829     20234 RTE       _MAXEVENTTASKS=2
    2008-05-13 16:35:55 18829     20234 RTE       MAXGARBAGECOLL=1
    2008-05-13 16:35:55 18829     20234 RTE       MAXLOCKS=4080
    2008-05-13 16:35:55 18829     20234 RTE       MAXLOGVOLUMES=2
    2008-05-13 16:35:55 18829     20234 RTE       MAXPAGER=11
    2008-05-13 16:35:55 18829     20234 RTE       MAXRGN_REQUEST=-1
    2008-05-13 16:35:55 18829     20234 RTE       MAXSERVERTASKS=28
    2008-05-13 16:35:55 18829     20234 RTE       MAXTASKSTACK=512
    2008-05-13 16:35:55 18829     20234 RTE       _MAXTRANS=408
    2008-05-13 16:35:55 18829     20234 RTE       MAXUSERTASKS=50
    2008-05-13 16:35:55 18829     20234 RTE       MAXVOLUMES=14
    2008-05-13 16:35:55 18829     20234 RTE       MAX_HASHTABLE_MEMORY=5120
    2008-05-13 16:35:55 18829     20234 RTE       MAX_LOG_QUEUE_COUNT=0
    2008-05-13 16:35:55 18829     20234 RTE       MAXMESSAGE_FILES=0
    2008-05-13 16:35:55 18829     20234 RTE       MAX_MESSAGE_LIST_LENGTH=100
    2008-05-13 16:35:55 18829     20234 RTE       MAX_RETENTION_TIME=480
    2008-05-13 16:35:55 18829     20234 RTE       MAX_SERVERTASK_STACK=500
    2008-05-13 16:35:55 18829     20234 RTE       MAX_SINGLE_HASHTABLE_SIZE=512
    2008-05-13 16:35:55 18829     20234 RTE       MAX_SPECIALTASK_STACK=500
    2008-05-13 16:35:55 18829     20234 RTE       MBLOCKDATA_SIZE=32768
    2008-05-13 16:35:55 18829     20234 RTE       MBLOCKQUAL_SIZE=32768
    2008-05-13 16:35:55 18829     20234 RTE       MBLOCKSTACK_SIZE=32768
    2008-05-13 16:35:55 18829     20234 RTE       MBLOCKSTRAT_SIZE=12288
    2008-05-13 16:35:55 18829     20234 RTE       MCOD=NO
    2008-05-13 16:35:55 18829     20234 RTE       MEMORY_ALLOCATION_LIMIT=0
    2008-05-13 16:35:55 18829     20234 RTE       MINREPLYSIZE=4096
    2008-05-13 16:35:55 18829     20234 RTE       MINSERVERTASKS=28
    2008-05-13 16:35:55 18829     20234 RTE       MIN_RETENTION_TIME=60
    2008-05-13 16:35:55 18829     20234 RTE       MONITOR_READ=2147483647
    2008-05-13 16:35:55 18829     20234 RTE       MONITOR_ROWNO=0
    2008-05-13 16:35:55 18829     20234 RTE       MONITOR_SELECTIVITY=0
    2008-05-13 16:35:55 18829     20234 RTE       MONITOR_TIME=2147483647
    2008-05-13 16:35:55 18829     20234 RTE       MPDISP_LOOPS=2
    2008-05-13 16:35:55 18829     20234 RTE       MPDISP_PRIO=DEFAULT
    2008-05-13 16:35:55 18829     20234 RTE       MPRGN_BUSY_WAIT=DEFAULT
    2008-05-13 16:35:55 18829     20234 RTE       MPRGN_DIRTY_READ=DEFAULT
    2008-05-13 16:35:55 18829     20234 RTE       MP_RGN_LOOP=-1
    2008-05-13 16:35:55 18829     20234 RTE       MPRGN_PRIO=DEFAULT
    2008-05-13 16:35:55 18829     20234 RTE       MPRGN_QUEUE=YES
    2008-05-13 16:35:55 18829     20234 RTE       NO_SYNC_TO_DISK_WANTED=NO
    2008-05-13 16:35:55 18829     20234 RTE       OFFICIAL_NODE=
    2008-05-13 16:35:55 18829     20234 RTE       OMS_HEAP_BLOCKSIZE=10000
    2008-05-13 16:35:55 18829     20234 RTE       OMS_HEAP_COUNT=1
    2008-05-13 16:35:55 18829     20234 RTE       OMS_HEAP_LIMIT=0
    2008-05-13 16:35:55 18829     20234 RTE       OMS_HEAP_THRESHOLD=100
    2008-05-13 16:35:55 18829     20234 RTE       OMSREGIONS=0
    2008-05-13 16:35:55 18829     20234 RTE       OMSRGNS=7
    2008-05-13 16:35:55 18829     20234 RTE       OMS_RUN_IN_UDE_SERVER=NO
    2008-05-13 16:35:55 18829     20234 RTE       OMS_STREAM_TIMEOUT=30
    2008-05-13 16:35:55 18829     20234 RTE       OMS_VERS_THRESHOLD=2097152
    2008-05-13 16:35:55 18829     20234 RTE       ONLINE=1
    2008-05-13 16:35:55 18829     20234 RTE       OPMSG1=/dev/console
    2008-05-13 16:35:55 18829     20234 RTE       OPMSG2=/dev/null
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_AGGREGATION=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_FETCH_REVERSE=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_FIRST_ROWS=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_JOIN_HASHTABLE=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_JOIN_HASH_MINIMAL_RATIO=1
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_JOIN_ONEPHASE=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_JOIN_OPERATOR_SORT=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_JOIN_OUTER=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_JOIN_PARALLEL_MINSIZE=1000000
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_JOIN_PARALLEL_SERVERS=0
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_MIN_MAX=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_OPERATOR_JOIN_COSTFUNC=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_OPERATOR_JOIN=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_QUAL_ON_INDEX=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIMIZE_QUERYREWRITE=STATEMENT
    2008-05-13 16:35:55 18829     20234 RTE       OPTIM_CACHE=NO
    2008-05-13 16:35:55 18829     20234 RTE       OPTIM_INV_ONLY=YES
    2008-05-13 16:35:55 18829     20234 RTE       OPTIM_JOIN_FETCH=0
    2008-05-13 16:35:55 18829     20234 RTE       OPTIM_MAX_MERGE=500
    2008-05-13 16:35:55 18829     20234 RTE       OUTOFSESSIONS=3
    2008-05-13 16:35:55 18829     20234 RTE       PACKETSIZE=131072
    2008-05-13 16:35:55 18829     20234 RTE       PAGESIZE=8192
    2008-05-13 16:35:55 18829     20234 RTE       PREALLOCATE_IOWORKER=NO
    2008-05-13 16:35:55 18829     20234 RTE       PRIOBASE_COM=10
    2008-05-13 16:35:55 18829     20234 RTE       PRIOBASE_IOC=80
    2008-05-13 16:35:55 18829     20234 RTE       PRIOBASE_RAV=80
    2008-05-13 16:35:55 18829     20234 RTE       PRIOBASE_REX=40
    2008-05-13 16:35:55 18829     20234 RTE       PRIOBASE_U2U=100
    2008-05-13 16:35:55 18829     20234 RTE       PRIOFACTOR=80
    2008-05-13 16:35:55 18829     20234 RTE       PROTECT_DATACACHE_MEMORY=NO
    2008-05-13 16:35:55 18829     20234 RTE       READAHEADBLOBS=32
    2008-05-13 16:35:55 18829     20234 RTE       REQUEST_TIMEOUT=5000
    2008-05-13 16:35:55 18829     20234 RTE       RESERVEDSERVERTASKS=16
    2008-05-13 16:35:55 18829     20234 RTE       RESTARTTIME=600
    2008-05-13 16:35:55 18829     20234 RTE       ROWRGNS=8
    2008-05-13 16:35:55 18829     20234 RTE       _RTEDUMPFILE=rtedump
    2008-05-13 16:35:55 18829     20234 RTE       RTE_TEST_REGIONS=0
    2008-05-13 16:35:55 18829     20234 RTE       RUNDIRECTORY=/var/opt/sdb/data/wrk/SAPDB02A
    2008-05-13 16:35:55 18829     20234 RTE       SEQUENCE_CACHE=1
    2008-05-13 16:35:55 18829     20234 RTE       SERVERDBFOR_SAP=YES
    2008-05-13 16:35:55 18829     20234 RTE       SESSION_TIMEOUT=900
    2008-05-13 16:35:55 18829     20234 RTE       SET_VOLUME_LOCK=YES
    2008-05-13 16:35:55 18829     20234 RTE       SHAREDSQL_COMMANDCACHESIZE=262144
    2008-05-13 16:35:55 18829     20234 RTE       SHAREDSQL_EXPECTEDSTATEMENTCOUNT=1500
    2008-05-13 16:35:55 18829     20234 RTE       SHAREDSQL=YES
    2008-05-13 16:35:55 18829     20234 RTE       _SHMKERNEL=6236
    2008-05-13 16:35:55 18829     20234 RTE       SHOW_MAX_KB_STACK_USE=NO
    2008-05-13 16:35:55 18829     20234 RTE       SHOW_MAX_STACK_USE=NO
    2008-05-13 16:35:55 18829     20234 RTE       SIMULATE_VECTORIO=IF_OPEN_DIRECT_OR_RAW_DEVICE
    2008-05-13 16:35:55 18829     20234 RTE       STANDBY=1
    2008-05-13 16:35:55 18829     20234 RTE       SUBTREE_LOCKS=NO
    2008-05-13 16:35:55 18829     20234 RTE       SUPPRESS_CORE=YES
    2008-05-13 16:35:55 18829     20234 RTE       SYMBOL_DEMANGLING=NO
    2008-05-13 16:35:55 18829     20234 RTE       SYMBOL_RESOLUTION=YES
    2008-05-13 16:35:55 18829     20234 RTE       SYSTEMERROR=3
    2008-05-13 16:35:55 18829     20234 RTE       TABRGNS=8
    2008-05-13 16:35:55 18829     20234 RTE       TASKCLUSTER01=tw;al;ut;2000sv,100bup;10ev,10gc;
    2008-05-13 16:35:55 18829     20234 RTE       TASKCLUSTER02=ti,100dw;30000us;
    2008-05-13 16:35:55 18829     20234 RTE       TASKCLUSTER03=compress
    2008-05-13 16:35:55 18829     20234 RTE       TIME_MEASUREMENT=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_AK=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_ALLOCATOR=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_CATALOG=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_CLIENTKERNELCOM=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_COMMON=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_COMMUNICATION=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_CONVERTER=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_DATACHAIN=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_DATAINDEX=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_DATAPAM=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_DATATREE=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_DBPROC=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_DEFAULT=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_DELETE=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_FBM=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_FILEDIR=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_FRAMECTRL=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_INDEX=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_INSERT=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_IOMAN=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_IPC=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_JOIN=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_KSQL=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_LOCK=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_LOGACTION=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_LOGHISTORY=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_LOGPAGE=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_LOGTRANS=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_LOGVOLUME=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_LONG=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_MEMORY=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_MESSAGES=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OBJECTCONTAINER=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OBJECT_ADD=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OBJECT_ALTER=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OBJECT_FREE=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OBJECT_GET=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OBJECT=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_CONTAINERDIR=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_CONTEXT=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_ERROR=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_FLUSHCACHE=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_INTERFACE=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_KEYRANGE=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_KEY=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_LOCK=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_MEMORY=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_NEWOBJ=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_SESSION=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_STREAM=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_VAROBJECT=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OMS_VERSION=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_OPTIMIZE=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_ORDER_STANDARD=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_ORDER=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PAGER=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PAGES_BUP=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PAGES_EV=2
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PAGES_GC=20
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PAGES_LW=5
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PAGES_PG=3
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PAGES_SV=5
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PAGES_TI=2
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PAGES_US=10
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PAGES_UT=5
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PAGES=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_PRIMARY_TREE=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_QUERYREWRITE=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_RUNTIME=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_SELECT=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_SHAREDSQL=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_SQLMANAGER=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_SRVTASKS=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_STOP_ERRORCODE=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_SYNCHRONISATION=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_SYSVIEW=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_TABLE=0
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_TIME=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_UPDATE=NO
    2008-05-13 16:35:55 18829     20234 RTE       TRACE_VOLUME=0
    2008-05-13 16:35:55 18829     20234 RTE       TRANS_HISTORY_SIZE=0
    2008-05-13 16:35:55 18829     20234 RTE       TRANSRGNS=8
    2008-05-13 16:35:55 18829     20234 RTE       TRANS_THRESHOLD_VALUE=60
    2008-05-13 16:35:55 18829     20234 RTE       UKT_CPU_RELATIONSHIP=NONE
    2008-05-13 16:35:55 18829     20234 RTE       _UNICODE=NO
    2008-05-13 16:35:55 18829     20234 RTE       UPDATESTAT_PARALLEL_SERVERS=0
    2008-05-13 16:35:55 18829     20234 RTE       UPDATESTAT_SAMPLE_ALGO=1
    2008-05-13 16:35:55 18829     20234 RTE       UPDSTATWANTED=1
    2008-05-13 16:35:55 18829     20234 RTE       USED_MAX_LOG_QUEUE_COUNT=1
    2008-05-13 16:35:55 18829     20234 RTE       USESELECTFETCH=YES
    2008-05-13 16:35:55 18829     20234 RTE       USEVARIABLEINPUT=NO
    2008-05-13 16:35:55 18829     20234 RTE       USE_COROUTINES=YES
    2008-05-13 16:35:55 18829     20234 RTE       USEIOPROCS_ONLY=NO
    2008-05-13 16:35:55 18829     20234 RTE       USE_OPEN_DIRECT=NO
    2008-05-13 16:35:55 18829     20234 RTE       USE_STACK_ON_STACK=YES
    2008-05-13 16:35:55 18829     20234 RTE       USE_SYSTEM_PAGE_CACHE=YES
    2008-05-13 16:35:55 18829     20234 RTE       USE_UCONTEXT=YES
    2008-05-13 16:35:55 18829     20234 RTE       UTILITYPROTFILE=dbm.utl
    2008-05-13 16:35:55 18829     20234 RTE       UTILITY_PROTSIZE=100
    2008-05-13 16:35:55 18829     20234 RTE       VOLUMENO_BIT_COUNT=8
    2008-05-13 16:35:55 18829     20234 RTE       WORKDATASIZE=8192
    2008-05-13 16:35:55 18829     20234 RTE       WORKSTACKSIZE=8192
    2008-05-13 16:35:55 18829     20234 RTE       XP_CONVERTER_REGIONS=0
    2008-05-13 16:35:55 18829     20234 RTE       XP_DATA_CACHE_RGNS=0
    2008-05-13 16:35:55 18829     20234 RTE       XP_MAXPAGER=0
    2008-05-13 16:35:55 18829     20235 RTE      Dump of all kernel parameters done
    2008-05-13 16:35:55 18829 WNG 11489 PARAM    Open system console '/dev/console' reports (13) Permission denied
    2008-05-13 16:35:55 18829 WNG 11489 PARAM    Modify parameter OPMSG1 or enable write access to prevent this message
    2008-05-13 16:35:55 18829     12770 INFO              SERVERNODE:    'sapdb02'
    2008-05-13 16:35:55 18829     12932 INFO     maximum cpu time: unlimited
    2008-05-13 16:35:55 18829     12933 INFO     maximum number of processes: 4096
    2008-05-13 16:35:55 18829     12891 INFO     maximum core size: 0 MB
    2008-05-13 16:35:55 18829     12892 INFO     maximum number of open files: 1024
    2008-05-13 16:35:55 18829     12934 INFO     maximum file size: unlimited
    2008-05-13 16:35:55 18829     12895 INFO     maximum number of threads: unlimited
    2008-05-13 16:35:55 18829     12935 INFO     maximum stack size: 8 MB
    2008-05-13 16:35:55 18829     12936 INFO     lockable memory size: 0 MB
    2008-05-13 16:35:55 18829     12893 INFO     maximum virtual memory size: unlimited
    2008-05-13 16:35:55 18829     12937 INFO     resident set size size: unlimited
    2008-05-13 16:35:55 18829     12894 INFO     maximum heap size: unlimited
    2008-05-13 16:35:55 18829     12898 ENVIRON  Environment dump start
    2008-05-13 16:35:55 18829     12898 ENVIRON   ACLOCAL_FLAGS=-I /opt/gnome/share/aclocal
    2008-05-13 16:35:55 18829     12898 ENVIRON   COLORTERM=1
    2008-05-13 16:35:55 18829     12898 ENVIRON   CPU=i686
    2008-05-13 16:35:55 18829     12898 ENVIRON   CSHEDIT=emacs
    2008-05-13 16:35:55 18829     12898 ENVIRON   DBROOT=/opt/sdb/7600
    2008-05-13 16:35:55 18829     12898 ENVIRON   DSM_CONFIG=/opt/tivoli/tsm/client/ba/bin/dsm.opt
    2008-05-13 16:35:55 18829     12898 ENVIRON   DSM_DIR=/opt/tivoli/tsm/client/ba/bin
    2008-05-13 16:35:55 18829     12898 ENVIRON   DSM_HOME=/opt/tivoli/tsm
    2008-05-13 16:35:55 18829     12898 ENVIRON   DSM_LOG=/var/log/dsm
    2008-05-13 16:35:55 18829     12898 ENVIRON   ENV=/etc/bash.bashrc
    2008-05-13 16:35:55 18829     12898 ENVIRON   FROM_HEADER=
    2008-05-13 16:35:55 18829     12898 ENVIRON   GNOME2_PATH=/usr/local:/opt/gnome:/usr
    2008-05-13 16:35:55 18829     12898 ENVIRON   GROFF_NO_SGR=yes
    2008-05-13 16:35:55 18829     12898 ENVIRON   G_BROKEN_FILENAMES=1
    2008-05-13 16:35:55 18829     12898 ENVIRON   HISTSIZE=1000
    2008-05-13 16:35:55 18829     12898 ENVIRON   HOME=/root
    2008-05-13 16:35:55 18829     12898 ENVIRON   HOST=sapdb02
    2008-05-13 16:35:55 18829     12898 ENVIRON   HOSTNAME=sapdb02
    2008-05-13 16:35:55 18829     12898 ENVIRON   HOSTTYPE=i386
    2008-05-13 16:35:55 18829     12898 ENVIRON   INFODIR=/usr/local/info:/usr/share/info:/usr/info
    2008-05-13 16:35:55 18829     12898 ENVIRON   INFOPATH=/usr/local/info:/usr/share/info:/usr/info:/opt/gnome/share/info
    2008-05-13 16:35:55 18829     12898 ENVIRON   INPUTRC=/etc/inputrc
    2008-05-13 16:35:55 18829     12898 ENVIRON   LANG=POSIX
    2008-05-13 16:35:55 18829     12898 ENVIRON   LC_CTYPE=de_DE.UTF-8
    2008-05-13 16:35:55 18829     12898 ENVIRON   LD_LIBRARY_PATH=/opt/sdb/7600/lib:/opt/sdb/7600/sap
    2008-05-13 16:35:55 18829     12898 ENVIRON   LESS=-M -I
    2008-05-13 16:35:55 18829     12898 ENVIRON   LESSCLOSE=lessclose.sh %s %s
    2008-05-13 16:35:55 18829     12898 ENVIRON   LESSKEY=/etc/lesskey.bin
    2008-05-13 16:35:55 18829     12898 ENVIRON   LESSOPEN=lessopen.sh %s
    2008-05-13 16:35:55 18829     12898 ENVIRON   LESS_ADVANCED_PREPROCESSOR=no
    2008-05-13 16:35:55 18829     12898 ENVIRON   LOGNAME=root
    2008-05-13 16:35:55 18829     12898 ENVIRON   LS_COLORS=no=00:fi=00:di=01;34:ln=00;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=41;33;01:ex=00;32:*.
    2008-05-13 16:35:55 18829     12898 ENVIRON    cmd=00;32:.exe=01;32:.com=01;32:.bat=01;32:.btm=01;32:.dll=01;32:.tar=00;31:.tbz=00;31:.tgz=00;31:*.rpm=0
    2008-05-13 16:35:55 18829     12898 ENVIRON    0;31:.deb=00;31:.arj=00;31:.taz=00;31:.lzh=00;31:.zip=00;31:.zoo=00;31:.z=00;31:.Z=00;31:.gz=00;31:.bz2
    2008-05-13 16:35:55 18829     12898 ENVIRON    =00;31:.tb2=00;31:.tz2=00;31:.tbz2=00;31:.avi=01;35:.bmp=01;35:.fli=01;35:.gif=01;35:.jpg=01;35:*.jpeg=01
    2008-05-13 16:35:55 18829     12898 ENVIRON    ;35:.mng=01;35:.mov=01;35:.mpg=01;35:.pcx=01;35:.pbm=01;35:.pgm=01;35:.png=01;35:.ppm=01;35:.tga=01;35:
    2008-05-13 16:35:55 18829     12898 ENVIRON    .tif=01;35:.xbm=01;35:.xpm=01;35:.dl=01;35:.gl=01;35:.wmv=01;35:.aiff=00;32:.au=00;32:.mid=00;32:*.mp3=00
    2008-05-13 16:35:55 18829     12898 ENVIRON    ;32:.ogg=00;32:.voc=00;32:*.wav=00;32:
    2008-05-13 16:35:55 18829     12898 ENVIRON   LS_OPTIONS=-A -N --color=tty -T 0
    2008-05-13 16:35:55 18829     12898 ENVIRON   MACHTYPE=i686-suse-linux
    2008-05-13 16:35:55 18829     12898 ENVIRON   MAIL=/var/mail/root
    2008-05-13 16:35:55 18829     12898 ENVIRON   MANPATH=/usr/share/man:/usr/local/man:/usr/X11R6/man:/opt/gnome/share/man
    2008-05-13 16:35:55 18829     12898 ENVIRON   MINICOM=-c on
    2008-05-13 16:35:55 18829     12898 ENVIRON   MORE=-sl
    2008-05-13 16:35:55 18829     12898 ENVIRON   NNTPSERVER=news
    2008-05-13 16:35:55 18829     12898 ENVIRON   OSTYPE=linux
    2008-05-13 16:35:55 18829     12898 ENVIRON   PAGER=less
    2008-05-13 16:35:55 18829     12898 ENVIRON   PATH=/opt/sdb/7600/bin:/opt/sdb/programs/bin:/sbin:/usr/sbin:/usr/local/sbin:/opt/gnome/sbin:/root/bin:/usr/local/
    2008-05-13 16:35:55 18829     12898 ENVIRON    bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
    2008-05-13 16:35:55 18829     12898 ENVIRON   PKG_CONFIG_PATH=/opt/gnome/lib/pkgconfig:/opt/gnome/share/pkgconfig
    2008-05-13 16:35:55 18829     12898 ENVIRON   PROFILEREAD=true
    2008-05-13 16:35:55 18829     12898 ENVIRON   PWD=/etc/init.d
    2008-05-13 16:35:55 18829     12898 ENVIRON   PYTHONSTARTUP=/etc/pythonstart
    2008-05-13 16:35:55 18829     12898 ENVIRON   SERVERDB=SAPDB02A
    2008-05-13 16:35:55 18829     12898 ENVIRON   SHELL=/bin/bash
    2008-05-13 16:35:55 18829     12898 ENVIRON   SHLVL=3
    2008-05-13 16:35:55 18829     12898 ENVIRON   SSH_CLIENT=10.10.40.62 1385 22
    2008-05-13 16:35:55 18829     12898 ENVIRON   SSH_CONNECTION=10.10.40.62 1385 10.9.100.178 22
    2008-05-13 16:35:55 18829     12898 ENVIRON   SSH_TTY=/dev/pts/0
    2008-05-13 16:35:55 18829     12898 ENVIRON   TERM=xterm
    2008-05-13 16:35:55 18829     12898 ENVIRON   TEXINPUTS=:/root/.TeX:/usr/share/doc/.TeX:/usr/doc/.TeX
    2008-05-13 16:35:55 18829     12898 ENVIRON   USER=root
    2008-05-13 16:35:55 18829     12898 ENVIRON   WINDOWMANAGER=
    2008-05-13 16:35:55 18829     12898 ENVIRON   XDG_CONFIG_DIRS=/usr/local/etc/xdg/:/etc/xdg/:/etc/opt/gnome/xdg/
    2008-05-13 16:35:55 18829     12898 ENVIRON   XDG_DATA_DIRS=/usr/local/share/:/usr/share/:/etc/opt/kde3/share/:/opt/kde3/share/:/opt/gnome/share/
    2008-05-13 16:35:55 18829     12898 ENVIRON   XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB
    2008-05-13 16:35:55 18829     12898 ENVIRON   XNLSPATH=/usr/X11R6/lib/X11/nls
    2008-05-13 16:35:55 18829     12898 ENVIRON   _=/opt/sdb/programs/bin/dbmcli
    2008-05-13 16:35:55 18829     12898 ENVIRON  Environment dump completed
    2008-05-13 16:35:55 18829     12883 DBSTATE  Core dump suppressed
    2008-05-13 16:35:55 18829     20219 RTE      Memory allocation not limited
    2008-05-13 16:35:55 18829     20220 RTE      System page cache usage enabled
    2008-05-13 16:35:55 18829     12927 TASKING  Using coroutines for tasks
    2008-05-13 16:35:55 18829     12927 TASKING  Using UKT stack for coroutine stack
    2008-05-13 16:35:55 18829     12927 TASKING  Using ucontext_t for coroutine context
    2008-05-13 16:35:55 18829     12692 TCLUSTER tw;al;ut;2000sv,100bup;10ev,10gc;ti,100dw;30000us;compress
    2008-05-13 16:35:55 18829     12693 TCLUSTER number of 'BUP':   0
    2008-05-13 16:35:55 18829     12693 TCLUSTER number of ' DW':  11
    2008-05-13 16:35:55 18829     12693 TCLUSTER number of ' US':  50
    2008-05-13 16:35:55 18829     12693 TCLUSTER number of ' SV':  28
    2008-05-13 16:35:55 18829     12693 TCLUSTER number of ' EV':   2
    2008-05-13 16:35:55 18829     12693 TCLUSTER number of ' GC':   1
    2008-05-13 16:35:55 18829     12692 TCLUSTER Total Number of UKT 7
    2008-05-13 16:35:55 18829     12692 TCLUSTER Number of UKT with User Tasks 1
    2008-05-13 16:35:55 18829     12698 IPC      Common RTE specific IPC key: 0x44000000
    2008-05-13 16:35:55 18829     11536 init_shm attached shared section at   0x50000000
    2008-05-13 16:35:55 18829     11537 init_shm shared section ends at       0x500A2000
    2008-05-13 16:36:02 18829     11521 PIPE_IO  Operating system does not support fstat for input check of pipes
    2008-05-13 16:36:02 18829     11522 PIPE_IO  Input check for pipe with poll supported
    2008-05-13 16:36:02 18829     11000 INITIAL  Verified that open of needed 165 file descriptors is possible
    2008-05-13 16:36:07 18835     12821 TASKING  Thread 18835 starting
    2008-05-13 16:36:07 18834     12767          CLOCK started
    2008-05-13 16:36:07 18836     12821 TASKING  Thread 18836 starting
    2008-05-13 16:36:08 18834     12769 INFO     Starting SERVERDB:      '+++++++++++++++++++++++++++++++++++++++++++++++++'
    2008-05-13 16:36:08 18834     12769 INFO     Starting SERVERDB:      '+++++++++++++++++++ Kernel Forked +++++++++++++++'
    2008-05-13 16:36:08 18834     12769 INFO     Starting SERVERDB:      'SAPDB02A'
    2008-05-13 16:36:08 18834     12771 INFO              Process ID:    18834
    2008-05-13 16:36:08 18834     12769 INFO     Starting SERVERDB:      '+++++++++++++++++++++++++++++++++++++++++++++++++'
    2008-05-13 16:36:08 18834     12811 EVENTING Suppressing output to 'knldiag.evt' 0 pages
    2008-05-13 16:36:08 18834     12812 EVENTING Eventbuffer 2 events 100 tasks
    2008-05-13 16:36:08 18837     12821 TASKING  Thread 18837 starting
    2008-05-13 16:36:08 18834     12885 MEMORY   10000 Pages allocated for I/O buffer cache
    2008-05-13 16:36:08 18834     12831 TRACE_IO Configured MAXMESSAGE_FILES:0
    2008-05-13 16:36:08 18834     12832 TRACE_IO Disabled: No TraceMessagefiles wanted
    2008-05-13 16:36:08 18838     12821 TASKING  Thread 18838 starting
    2008-05-13 16:36:08 18839     12821 TASKING  Thread 18839 starting
    2008-05-13 16:36:08 18840     12821 TASKING  Thread 18840 starting
    2008-05-13 16:36:08 18841     12821 TASKING  Thread 18841 starting
    2008-05-13 16:36:08 18842     12821 TASKING  Thread 18842 starting
    2008-05-13 16:36:08 18838     20213 RTE      CONSOLE thread started
    2008-05-13 16:36:08 18843     12821 TASKING  Thread 18843 starting
    2008-05-13 16:36:08 18844     12821 TASKING  Thread 18844 starting
    2008-05-13 16:36:08 18844     11565 startup  TIMER started
    2008-05-13 16:36:08 18845     12821 TASKING  Thread 18845 starting
    2008-05-13 16:36:08 18845     11565 startup  REQUESTOR started
    2008-05-13 16:36:08 18846     12821 TASKING  Thread 18846 starting
    2008-05-13 16:36:08 18846     11565 startup  DEV0 started
    2008-05-13 16:36:08 18847     12821 TASKING  Thread 18847 starting
    2008-05-13 16:36:08 18848     12821 TASKING  Thread 18848 starting
    2008-05-13 16:36:08 18849     12821 TASKING  Thread 18849 starting
    2008-05-13 16:36:08 18850     12821 TASKING  Thread 18850 starting
    2008-05-13 16:36:08 18851     12821 TASKING  Thread 18851 starting
    2008-05-13 16:36:08 18852     12821 TASKING  Thread 18852 starting
    2008-05-13 16:36:08 18853     12821 TASKING  Thread 18853 starting
    2008-05-13 16:36:08 18854     12821 TASKING  Thread 18854 starting
    2008-05-13 16:36:08 18855     12821 TASKING  Thread 18855 starting
    2008-05-13 16:36:09 18855     12627 TASKING  UKT1 started
    2008-05-13 16:36:10 18856     12821 TASKING  Thread 18856 starting
    2008-05-13 16:36:10 18856     12627 TASKING  UKT2 started
    2008-05-13 16:36:11 18857     12821 TASKING  Thread 18857 starting
    2008-05-13 16:36:11 18857     12627 TASKING  UKT3 started
    2008-05-13 16:36:11 18857     11554 COMMUNIC UKT3 attached big comseg at  0xB1890000
    2008-05-13 16:36:11 18857     11555 COMMUNIC UKT3 big comseg ends at      0xB18B0088
    2008-05-13 16:36:12 18858     12821 TASKING  Thread 18858 starting
    2008-05-13 16:36:12 18858     12627 TASKING  UKT4 started
    2008-05-13 16:36:13 18859     12821 TASKING  Thread 18859 starting
    2008-05-13 16:36:13 18859     12627 TASKING  UKT5 started
    2008-05-13 16:36:13 18859     11554 COMMUNIC UKT5 attached big comseg at  0xB084D000
    2008-05-13 16:36:13 18859     11555 COMMUNIC UKT5 big comseg ends at      0xB088D0D8
    2008-05-13 16:36:14 18860     12821 TASKING  Thread 18860 starting
    2008-05-13 16:36:14 18861     12821 TASKING  Thread 18861 starting
    2008-05-13 16:36:14 18861     12627 TASKING  UKT7 started
    2008-05-13 16:36:14 18861     11554 COMMUNIC UKT7 attached big comseg at  0xAE232000
    2008-05-13 16:36:14 18861     11555 COMMUNIC UKT7 big comseg ends at      0xAE872FD8
    2008-05-13 16:36:15 18834     12627 TASKING  No CPU binding, since only 1 processor configured
    2008-05-13 16:36:15 18860     12627 TASKING  UKT6 started
    2008-05-13 16:36:15 18860     12929 TASKING  Task T1 started
    2008-05-13 16:36:15 18860     11525 vdevsize Start formatting 0 pages
    2008-05-13 16:36:15 18860     11527 vdevsize Finished formatting 711 pages
    2008-05-13 16:36:15 18860     11000 vdevsize 'knltrace', 710 succeeded
    2008-05-13 16:36:15 18862     12821 TASKING  Thread 18862 starting
    2008-05-13 16:36:15 18862     11597 IO       Open 'knltrace' successfull, fd: 17
    2008-05-13 16:36:15 18862     11565 startup  DEVi started
    2008-05-13 16:36:15 18860     11000 vattach  'knltrace' devno 0 T1 succeeded
    2008-05-13 16:36:15 18860     20040 Admin    Kernel state: 'ADMIN' reached
    2008-05-13 16:36:15 18860         9 SrvTasks Available Servertasks: 28
    2008-05-13 16:36:15 18860     54003 dynpool  HIST_DIR  item size    :      8
    2008-05-13 16:36:15 18860     54003 dynpool  HIST_DIR  num items    :     50
    2008-05-13 16:36:15 18860     54003 dynpool  DYNP_B930_HIST_DIR     :    400
    2008-05-13 16:36:15 18860     54003 dynDATA  DYND_K57_KB_PAGES      :     11
    2008-05-13 16:36:15 18860     54003 dynDATA  BACKUP RESTART REC (8K):      1
    2008-05-13 16:36:15 18860     54003 dynpool  BACKUP TASK LIST       :    208
    2008-05-13 16:36:15 18860     54003 dynpool  BACKUP TAPE LIST       :    672
    2008-05-13 16:36:15 18860     54003 dynpool  BACKUP DEVSP LIST      :     96
    2008-05-13 16:36:15 18860     54003 dynpool  BACKUP VOL IDX LIST    :     32
    2008-05-13 16:36:15 18860     54003 dynpool  BACKUP SRR QUEUE       :    656
    2008-05-13 16:36:15 18860     54003 dynpool  DYNP_K38_SAVE_GLOB     :   1568
    2008-05-13 16:36:15 18860     54003 dynDATA  DYND_K38_SAVE          :   1729
    2008-05-13 16:36:15 18860     54003 dynDATA  BACKUP RESTART REC (8K):      1
    2008-05-13 16:36:15 18860     54003 dynpool  BACKUP TASK LIST       :     32
    2008-05-13 16:36:15 18860     54003 dynpool  BACKUP TAPE LIST       :    672
    2008-05-13 16:36:15 18860     54003 dynpool  BACKUP DEVSP LIST      :     16
    2008-05-13 16:36:15 18860     54003 dynpool  BACKUP VOL IDX LIST    :     32
    2008-05-13 16:36:15 18860     54003 dynpool  BACKUP SRR QUEUE       :    128
    2008-05-13 16:36:15 18860     54003 dynpool  DYNP_K38_AUTOSAVE      :    864
    2008-05-13 16:36:15 18860     54003 dynDATA  DYND_K38_AUTOSAVE      :    321
    2008-05-13 16:36:15 18860     12930 TASKING  Kernel initialization completed
    2008-05-13 16:36:15 18860     12929 TASKING  Task T4 started
    2008-05-13 16:36:15 18860     20018 Pager    Start TaskId: 4
    2008-05-13 16:36:15 18860     20019 Pager    First DataCacheSegment:0
    2008-05-13 16:36:15 18860     12929 TASKING  Task T14 started
    2008-05-13 16:36:15 18860     20018 Pager    Start TaskId: 14
    2008-05-13 16:36:15 18860     20019 Pager    First DataCacheSegment:1
    2008-05-13 16:36:15 18860     12929 TASKING  Task T13 started
    2008-05-13 16:36:15 18860     20018 Pager    Start TaskId: 13
    2008-05-13 16:36:15 18860     20019 Pager    First DataCacheSegment:2
    2008-05-13 16:36:15 18860     12929 TASKING  Task T12 started
    2008-05-13 16:36:15 18860     20018 Pager    Start TaskId: 12
    2008-05-13 16:36:15 18860     20019 Pager    First DataCacheSegment:3
    2008-05-13 16:36:15 18860     12929 TASKING  Task T11 started
    2008-05-13 16:36:15 18860     20018 Pager    Start TaskId: 11
    2008-05-13 16:36:15 18860     20019 Pager    First DataCacheSegment:4
    2008-05-13 16:36:15 18860     12929 TASKING  Task T10 started
    2008-05-13 16:36:15 18860     20018 Pager    Start TaskId: 10
    2008-05-13 16:36:15 18860     20019 Pager    First DataCacheSegment:5
    2008-05-13 16:36:15 18860     12929 TASKING  Task T9 started
    2008-05-13 16:36:15 18860     20018 Pager    Start TaskId: 9
    2008-05-13 16:36:15 18860     20019 Pager    First DataCacheSegment:6
    2008-05-13 16:36:15 18860     12929 TASKING  Task T8 started
    2008-05-13 16:36:15 18860     20018 Pager    Start TaskId: 8
    2008-05-13 16:36:15 18860     20019 Pager    First DataCacheSegment:7
    2008-05-13 16:36:15 18860     12929 TASKING  Task T7 started
    2008-05-13 16:36:15 18860     20018 Pager    Start TaskId: 7
    2008-05-13 16:36:15 18860     20019 Pager    First DataCacheSegment:0
    2008-05-13 16:36:15 18860     12929 TASKING  Task T6 started
    2008-05-13 16:36:15 18860     20018 Pager    Start TaskId: 6
    2008-05-13 16:36:15 18860     20019 Pager    First DataCacheSegment:1
    2008-05-13 16:36:15 18860     12929 TASKING  Task T5 started
    2008-05-13 16:36:15 18860     20018 Pager    Start TaskId: 5
    2008-05-13 16:36:15 18860     20019 Pager    First DataCacheSegment:2
    2008-05-13 16:36:15 18856     12929 TASKING  Task T2 started
    2008-05-13 16:36:15 18855     12929 TASKING  Task T3 started
    2008-05-13 16:36:15 18859     12929 TASKING  Task T15 started
    2008-05-13 16:36:15 18859     11007 COMMUNIC wait for connection T15
    2008-05-13 16:36:15 18859     12929 TASKING  Task T17 started
    2008-05-13 16:36:15 18859     12929 TASKING  Task T16 started
    2008-05-13 16:36:15 18859     11007 COMMUNIC wait for connection T16
    2008-05-13 16:36:15 18858     12929 TASKING  Task T18 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T45 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T44 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T43 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T42 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T41 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T40 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T39 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T38 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T37 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T36 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T35 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T34 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T33 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T32 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T31 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T30 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T29 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T28 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T27 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T26 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T25 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T24 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T23 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T22 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T21 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T20 started
    2008-05-13 16:36:15 18858     12929 TASKING  Task T19 started
    2008-05-13 16:36:16 18844         3 RunTime  State changed from STARTING to ADMIN
    ======================================= end of startup part ====================
    2008-05-13 16:36:16 18844     11570 startup  complete
    2008-05-13 16:36:16 18860        31 SrvTasks Permanently reserved 13 servertasks for 'Backup / Restore'.
    2008-05-13 16:36:16 18860        31 SrvTasks Permanently reserved 2 servertasks for 'Backup / Restore'.
    2008-05-13 16:36:16 18860        31 SrvTasks Permanently reserved 1 servertasks for 'Savepoint'.
    2008-05-13 16:36:16 18845     11561 COMMUNIC Connecting T47 local 18826
    2008-05-13 16:36:16 18861     12929 TASKING  Task T47 started
    2008-05-13 16:36:16 18861     11007 COMMUNIC wait for connection T47
    2008-05-13 16:36:16 18861     11561 COMMUNIC Connected  T47 local 18826
    2008-05-13 16:36:16 18863     12821 TASKING  Thread 18863 starting
    2008-05-13 16:36:16 18863     11597 IO       Open '/dev/raw/raw1' successfull, fd: 10
    2008-05-13 16:36:16 18863     11565 startup  DEVi started
    2008-05-13 16:36:16 18864     12821 TASKING  Thread 18864 starting
    2008-05-13 16:36:16 18864     11597 IO       Open '/dev/raw/raw1' successfull, fd: 18
    2008-05-13 16:36:16 18861     11000 vattach  '/dev/raw/raw1' devno 1 T47 succeeded
    2008-05-13 16:36:16 18864     11565 startup  DEVi started
    2008-05-13 16:36:16 18865     12821 TASKING  Thread 18865 starting
    2008-05-13 16:36:16 18865     11597 IO       Open '/dev/raw/raw2' successfull, fd: 20
    2008-05-13 16:36:16 18865     11565 startup  DEVi started
    2008-05-13 16:36:16 18866     12821 TASKING  Thread 18866 starting
    2008-05-13 16:36:16 18866     11597 IO       Open '/dev/raw/raw2' successfull, fd: 21
    2008-05-13 16:36:16 18861     11000 vattach  '/dev/raw/raw2' devno 2 T47 succeeded
    2008-05-13 16:36:16 18866     11565 startup  DEVi started
    2008-05-13 16:36:16 18861     20016 Pager    Start Read Converter
    2008-05-13 16:36:16 18861     20017 Pager    Stop Read Converter, Pages: 8 IO: 8
    2008-05-13 16:36:16 18861     53000 DATACACH Begin data cache restart
    2008-05-13 16:36:16 18861     54003 dynpool  DATA_CACHE_REGIONS     :      8
    2008-05-13 16:36:16 18861     54003 dynpool  B20_DATACACHE_HEAD     :  79784
    2008-05-13 16:36:16 18861     54003 dynpool  DATACACHE head num item:   9973
    2008-05-13 16:36:16 18861     54003 dynpool  DATACACHE head item siz:      8
    2008-05-13 16:36:16 18861     54003 dynpool  DATACACHE task queue   :   1296
    2008-05-13 16:36:16 18861     54003 dynpool  US + SV + DW +  8      :     81
    2008-05-13 16:36:16 18861     54003 dynpool  DATACACHE taskq elem   :     16
    2008-05-13 16:36:16 18861     54003 dynpool  B20_DATACACHE_TASKQ    :  81080
    2008-05-13 16:36:16 18861     54003 dynDATA  DATA_CACHE_PAGES       :   1247
    2008-05-13 16:36:16 18861     54003 dynpool  B20_DATACACHE_CB       : 104748
    2008-05-13 16:36:16 18861     54003 dynpool  DATACACHE num cblocks  :   1247
    2008-05-13 16:36:16 18861     54003 dynpool  DATACACHE cblock size  :     84
    2008-05-13 16:36:16 18861     54003 dynpool  DYNP_B20_DATACACHE     :1486624
    2008-05-13 16:36:16 18861     54003 dynDATA  DYND_B20_DATACACHE     :   9976
    2008-05-13 16:36:16 18861     53000 DATACACH Finish data cache restart
    2008-05-13 16:36:16 18861     53000 B*TREE   LOB file directory restart successful
    2008-05-13 16:36:16 18861         7 FileDir  File directory restarting
    2008-05-13 16:36:16 18861         8 FileDir  File directory restart completed
    2008-05-13 16:36:16 18861     20061 Log      History: 50 (50) files existing
    2008-05-13 16:36:16 18861     20064 Log      History: all history files registered, GC is ready
    2008-05-13 16:36:16 18861     54003 dynpool  DYNP_K51_LOCK_LIST     :1189376
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK maxlocks          :   4080
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK items             :  14700
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK Regions           :     24
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK TransRegions      :      8
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK RegionGlob+Space  :   3072
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK TransGlob         :    640
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK SupplyItemsPerRgn :    100
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK SupplySize        : 172800
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK RowHash entries   :   4080
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK TabHash entries   :    816
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK Row+Tab hash size :  19712
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK Trans entries     :    408
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK trans_list size   :  78336
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK TransPtrList      :   1632
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK TransHash entries :    408
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK TransHash size    :   1664
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK SupplyPoolSegments:    123
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK SupplyPoolSize    : 888064
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK ObjColl_list size :  13056
    2008-05-13 16:36:16 18861     54003 dynpool  LOCK ObjReq_list size  :   8160
    2008-05-13 16:36:16 18861     20006 Log      1 queues, flushmode is 'MaximizeSafety', devstate is 'Okay'
    2008-05-13 16:36:16 18861     20007 Log      Oldest not saved is ioseq NIL @ off 1
    2008-05-13 16:36:16 18861     20008 Log      First known on LogVolume is ioseq 0 @ off 1
    2008-05-13 16:36:16 18861     20005 Log      Restart from ioseq 73471 @ off 3023 to ioseq 73471 @ off 3023
    2008-05-13 16:36:16 18861     20010 Log      Result after checking the log device: 'Ok'
    2008-05-13 16:36:16 18861         9 Log      The number of active logging-queues has been increased to 1
    2008-05-13 16:36:16 18861     53000 OBJECT   Restarted Garbage coll: 0
    2008-05-13 16:36:16 18861        11 Rst      408 redo transactions readable and 11 redo tasks available.
    2008-05-13 16:36:16 18858         7 Restart  recovering log from log_volume from IOSeq: '73471'
    2008-05-13 16:36:16 18858     20044 Log      normal end of log found at off 3023 lastseq 73471.
    2008-05-13 16:36:16 18858     20012 Log      last-redo-read empty errlist#1:TR4294967295(303)[73471]@3023.564'SavepointEntry':20080513:163518
    2008-05-13 16:36:16 18858         1 Savepoin Savepoint (Distance) started by T35
    2008-05-13 16:36:16 18858     20004 Pager    SVP(1) Start Write Data
    2008-05-13 16:36:16 18858     20005 Pager    SVP(1) Stop Data IO, Pages: 50 IO: 13
    2008-05-13 16:36:16 18858     20006 Pager    SVP(2) Wait for last task: 34
    2008-05-13 16:36:16 18858     20007 Pager    SVP(2) Stop Wait for last task, Pages: 0 IO: 0
    2008-05-13 16:36:16 18858     53070 SAVPOINT B20PREPARE_SVP: 305
    2008-05-13 16:36:16 18858     20008 Pager    SVP(3) Start Write Data
    2008-05-13 16:36:17 18858     20009 Pager    SVP(3) Stop Data IO, Pages: 2 IO: 2
    2008-05-13 16:36:17 18858     20010 Pager    SVP(3) Start Write Converter
    2008-05-13 16:36:17 18858     20011 Pager    SVP(3) Stop Converter IO, Pages: 8 IO: 8
    2008-05-13 16:36:17 18858     53071 SAVPOINT B20SVP_COMPLETED: 305
    2008-05-13 16:36:17 18861         5 Rst      RedoControl: End of redo processing
    2008-05-13 16:36:17 18861         4 Rst       +   RedoControl: OldestCommitSeq: NIL, RedoTasks: 11 , MaxRedoTrans: 408
    2008-05-13 16:36:17 18861         6 Rst       +   RedoControl: EndOfLogReached: true, RedoIsAborted: false, RedoProcessingDisabled: false
    2008-05-13 16:36:17 18861        12 Rst       +   RedoControl: redo reader T0 wait reason:  isNotWaiting, waiting redo executer:  0
    2008-05-13 16:36:17 18861         8 Rst       +   RedoControl: Transactions processed: 0 (0)
    2008-05-13 16:36:17 18861         1 Savepoin Savepoint (Restart) started by T47
    2008-05-13 16:36:17 18858     20004 Pager    SVP(1) Start Write Data
    2008-05-13 16:36:17 18858     20005 Pager    SVP(1) Stop Data IO, Pages: 0 IO: 0
    2008-05-13 16:36:17 18858     20006 Pager    SVP(2) Wait for last task: 34
    2008-05-13 16:36:17 18858     20007 Pager    SVP(2) Stop Wait for last task, Pages: 0 IO: 0
    2008-05-13 16:36:17 18858     53070 SAVPOINT B20PREPARE_SVP: 306
    2008-05-13 16:36:17 18858     20008 Pager    SVP(3) Start Write Data
    2008-05-13 16:36:18 18858     20009 Pager    SVP(3) Stop Data IO, Pages: 2 IO: 2
    2008-05-13 16:36:18 18858     20010 Pager    SVP(3) Start Write Conve

  • N97 system error after software update

    hello there...
    I've recently updated my N97 software to 21.0.045 (the last one)... and right after the update is finished, it gave me "system error" on installing... and now I can't get access to the clock, the calender and others... it even stops responding for a while each time I open sittings... and there is no theme effects when the screen flips to landscape even if it is on... please people, I really need help in that, the clock, alarms and the calender are soooo important for me !!!
    thanks
    Any fool can make things bigger, more complex and more violent. It takes a touch of genius and a lot of courage to move in the opposite direction.
    Solved!
    Go to Solution.

    psychomania wrote:
    I'm not being offensive. Just stating facts.
    I am simply highlighting the fact so that the user will see it and be aware of what you suggested would do.  Sorry if you took offence at that but the user comes first.
    of course customer first , i'm doing this with happiness , cause i'll be very happy to help them without reaso
    psychomania wrote:
    starting petty arguments to cover up your mistakes like you did yesterday. 
    i'm not covering up my mistakes , what mistakes do u mean ?? yesterday , i said that i said that because it's in Nokia warranty of the authourised nokia resellers in my region and didn't know that this doesn't apply all over the world
    psychomania wrote:
    This forum exists to help people, not for you to spam posts without thinking about the consequences.
    it's not for me, it's for all NOKIA users, and i'm not spamming as if i was that, so how could i stay all that time, solving others problems with alot of thanx
    even if i solved 2 problems , that proves that i'm not spamming
    so .... welcome bro in NOKIA USERS discussion board
    -you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
    -if my answer was the solution , so click accept as solution button
    Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

  • Calendar system error (-1) with Nokia N95

    My N95 keeps presenting the error message "Calendar: system error (-1)" when I try to access the calendar.
    N95 with firmware V 12.0.013 19-06-07 RM-159 Nokia N95 (B1.01)
    Has anyone experienced the same error before? Any ideas on how to solve it?
    Thanks,
    Giba

    Latest firmware for N95 is 20.0.015. Check with your product code on:
    http://europe.nokia.com/A4577224
    Search the forums, though, for more info about this update, because there are some issues with SIP and VoIP. Overall, though, the phone increases its battery life, memory performance and camera image quality. The newer firmware is available since November 26th.
    Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
    If I've helped, use the Kudos button to thank

  • N8 System Error when installing apps

    I'm continously getting a 'System error' message whenever I try to install some apps, such as Nokia Battery Monitor, Youtube Downloader and fMobi. This occurence only began recently after updating to Symbian Anna. I've installed many other apps and can still install other apps but I seem to have a problem with a select few. I have attempted to uninstall and reinstall the apps and also done a delete and restore after backup but still no change.
    Thanks in advance for any suggestions 
    Nokia N8 - Symbian Anna  - 059C5Q8 - Unbranded - UK

    I did the update yesterday via OVI.........
    I get a "system error" message every time the phone starts
    Can't get into my contacts at all, the timer pops up and then goes away! (There are 260 in memory and SPB Shell has access!!!)
    Conversations won't run, says not available feature
    Can't install the beta labs sleeping screen
    Took multiple attempts to install OVI chat
    All I want is a working phone!  It was working better before the damn update!
    It looks like there's something missing after the update 
    Tried *#7370# for return to factory defaults, no change
    Tried re-installing Anna, no change
    Anyone else having these issues too? Any solutions you can think of?
    This is a UK UNBRANDED N8 bought directly from Nokia in Finland
    Software version 022.014
    Custom version 022.014.226.06
    N8 (059C5Q5) now running Belle V111.030.0609
    N8 (059C5Q5) previously running Anna V25.007
    Previous [N97, N95 8Gb, N95, N82]
    If in doubt, RTFM! (Read The F***ing Manual)

  • System error -1 in Flickr

    Hi, I am trying to upload to Flickr with "Upload to web" with my Nokia N82. It worked for many weeks, but all I get now is this error message "System error -1" when I am trying. What is wrong?

    After loading the latest Nokia software the problem disappears, I guess that was my problem, that I haven't updated my phone since I bought it

  • Nokia N96- "System Error" Message

    Every time I want to access the clock eith through the short cut key or the menu I am having the "System error message". I have been advised by technical support to reformat the phone but still having the error. Before sending it back for repair, is there anything else I should try? Thanks in advance for your help.

    I think people here would also have advised you to reformat the phone. If you tried that to no avail then I suggest you take the phone in to your nearest Nokia Care Point.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • 6220 Classic System Error - help please!

    Hello,
    I'm just back from holiday and am trying to change the time back on my 6220 Classic to UK time but if I try and open the Clock option from the Office folder, it comes up with "System Error" and won't let me open the menu.  Nor will it open the "Date and Time" option from the Settings folder.  Does anyone have any suggestions as to what I could do to fix this issue?
    Thank you in anticipation!

    ok back up all your data 1st of all
    then try the following
    Soft Reset will clear pending errors and bring your mobile to an initial state by restoring Factory setting. To operate this function on your mobile, the shortcut is: *#7380#
    It may happen that despite you have restored your mobile to factory setting, the error still exist. In this case, it is recommended that you opt for Hard reset
    Enter the code: *#7370# and press Yes to confirm initialization.
    if you are asked for a code its 0000
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • 'System Error' status at Message Monitoring( HTTP to FILE )

    I have created a scenario HTTP to FTP. I sent message to XI server using the HTTP Client.
    After sending the message I am getting the response at browser.
    Result:
    http-Status:  200 Message accepted
    Payload:
    But when I look in to the Message monitoring at RWB, I am getting the message status as
    System error. while going to the details i can see below error category.
    Error Category       MAPPING
    Error Code      EXCEPTION_DURING_EXECUTE
    (Is the password different for port 50000 and 8000)
    Please help me to solve this issue.
    Thanks in Advance,
    John

    This is the trace message that I got for this error
    <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:41) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:70) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:231) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>
      <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_HTTP2File_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46)</Trace>
      <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_HTTP2File_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:72) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:41) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:70) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:231) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>

  • Getting "SYSTEM ERROR" while generating a PDF in a Workflow method.

    Dear All,
    I'm getting a "SYSTEM ERROR" when I'm calling the below function module in a Workflow BO Method.
    CALL FUNCTION wa_funcnm
       EXPORTING
         /1bcdwb/docparams  = fp_docparams
         invoice                     = invoice
       IMPORTING
         /1bcdwb/formoutput = fp_formoutput
       EXCEPTIONS
         usage_error        = 1
         system_error       = 2
         internal_error     = 3
         OTHERS             = 4.
    The aim is to generate the PDF and store it in DMS. Please let me know, if I'm going wrong somewhere. Any kind of inputs would be sincerely appreciated.
    Regards,
    Tushar.

    Hi Tushar
    You need to the following parameters when calling FM. Background WF process cannot handle dailog.
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-getpdf   = 'X'.
    Refer to Thread below
    Creating Attachments to Work Items or to User Decisions in Workflows
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
    i_name     = l_formname
        IMPORTING
    e_funcname = l_fm_name.
    *   E_INTERFACE_TYPE           =
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-getpdf   = 'X'.
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
    ie_outputparams = fp_outputparams
    EXCEPTIONS
    cancel          = 1
    usage_error     = 2
          system_error    = 3
    internal_error  = 4
    OTHERS          = 5.
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.
    fp_docparams-langu = 'X'.
    fp_docparams-country = 'US'.
      fp_docparams-fillable = 'X'.
      CALL FUNCTION l_fm_name
        EXPORTING
    /1bcdwb/docparams  = fp_docparams
    emp_info           = fs_per_info
        IMPORTING
    /1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
    EXCEPTIONS
    usage_error        = 1
          system_error       = 2
    internal_error     = 3
    OTHERS             = 4.
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.                               " IF sy-subrc <> 0
      CALL FUNCTION 'FP_JOB_CLOSE'
    *   IMPORTING
    * E_RESULT             = result
       EXCEPTIONS
    usage_error          = 1
    system_error         = 2
    internal_error       = 3
    OTHERS               = 4
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.                               " IF sy-subrc <> 0.
    ENDFORM.                    " GET_FUNCTION_MODULE
    *& Form  CONVERT_PDF_BINARY
    FORM CONVERT_PDF_BINARY .
      CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
        EXPORTING
    BUFFER                = FP_FORMOUTPUT-pdf
    *   APPEND_TO_TABLE       = ' '
    * IMPORTING
    * OUTPUT_LENGTH         =
        TABLES
    BINARY_TAB            = t_att_content_hex .
    ENDFORM.                    " CONVERT_PDF_BINARY
    Regards
    Sandy

Maybe you are looking for

  • How to add text dynamically in  Tree view list box

    CS3/WIN<br />hi,<br />I am new in plugin development.<br />I have a Tree View List box on a dialog.<br />b I don't want to display text when i load the plugin.<br />b I want to insert text data when i click on "Insert" button on dialog. <br />I have

  • Premiere Pro CC2014 - Graphic problem makes my machine freezes

    Hi guys, I use Adobe Premiere Pro since the subscriptions began. When I did the update to CC 2014, an issue starts and this freaking me out until now. I don't have a clue for what makes it starts but in a common edit day, after editing about 1 hour..

  • Java.lang.UnsatisfiedLinkError: when called from a jar file

    I have a class that calls a custom dll file. If I dont package the class files and set my system PATH to the location of the DLL then the VM is able to find the dll and load it successfully. However, when I package the class files into a jar file, I

  • RE:  Oracle Projects Setup and budget

    hello iam a new user in oracle projets module and working with construction industry. can u please help me in briefing out the process flow of projects. Another query is when iam tring to create Activity Based budget with respect to a project number,

  • Def bw call and sess

    hi experts, how can i put one default value in selection screen. gangireddy.