N82, Unable to install, Not Enough memory error, p...

Like installing some selected applications like Skyfire, Coreplayer, Palringo, but it just did that one time I needed to install the applications, when I bought it new it was fine.

I don't know how much memory you have in N82, but in N81 this was a frequent issue.
The problem was that the installation itself takes up a lot of memory, so in order to install a 3mb application I would need 6mb free. With some 12 mb total available and the normal operation soon taking up all but 5 mb this would be a problem. Back at the time I still had my N81 (It has been in service shop soon 4 months, a fact I have been pouring my heartt out elsewhere) I solved the problem that was installing both Maps 2 And NGage client like this.
I made a total reset of the phone, and started with maximum memory available. Then I started by installing the biggest applications first - NGage and maps 2 while I had the memory to spare for the installation process. Only then I would install the rest of the apps.
6267, N81, E71, BH-503, MD-7W, LD-3W

Similar Messages

Troubleshoot not enough memory error

I am getting a not enough memory error, and while there are tons of posts about this on the forums, I had some additional questions. First, I have two cRIOs, and think the error may have been thrown by one of them. Is this even possible though? I'm trying to narrow down which exe the error may be in. Second, does anyone have an order of steps they take when they get these errors in order to troubleshoot them?
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.

Found the REAL problem! I was not reading my header correctly, this resulted in type casting the wrong bytes of data. Every now and then I would be type casting bytes of data that when type casted from a string to a I32 resulted in a number around 17 million. I am assuming the TCP read tries to malloc this memory (or new if its c++ ) and was unable to do so. That's why I got the not enough memory error. When I started reading my TCP bytes correctly, the error went away.
CLA, LabVIEW Versions 2010-2013

Not Enough Memory Error During Update

There is a new update for Ovi Maps 3.04 today. I tried to install it using the Software Update app and kept getting a not enough memory error. I even tried closing all programs, deleted a few apps I no longer use and restared my phone. Still I get the error.
Any suggestions?
<\
\>tuntman

Have a read of this thread as i suffered the same problem:
/t5/Maps-Navigation-and-GPS/E52-error-when-installing-ovimaps/m-p/751192#M27026

Export several Fuji X-Trans Files got "Not Enough Memory" Error

When I tried to export several (say 15) Fuji X-Trans files at the same time, I got a "Not Enough Memory" Error. This problem only occurred after after upgrading to Lightroom 4.4. I can now only export a few (3-5) X-Trans files at the same time. Does anyone encounter this problem and know how to fix it?
I am using Windows 7 32-bit with 4GB memory, SSD System drive, and Radeon 7700 Graphics card. For Virtual memory, I set "no paging file" on C drive and "system managed size" on another SSD drive.
Thanks in advance.
Wilson

One might expect an Export function is single-threaded so the number of files exported wouldn’t matter, but perhaps if you are very close to the limit, memory fragmentation comes into play, where LR is requiring contiguous blocks and there aren’t any big enough. It’s probably time to upgrade to a 64-bit Windows system and start getting used to the Metro interface which isn’t bad as long as your frequently-used programs have tiles on the first screen.
Go to Help / System Info… and see how much memory LR has available. On my 32-bit system with 4GB of RAM installed LR only has 716.8MB available which is typical for 32-bit Windows applications:
Built-in memory: 3327.0 MB
Real memory available to Lightroom: 716.8 MB
Real memory used by Lightroom: 160.5 MB (22.3%)
Virtual memory used by Lightroom: 160.8 MB
Memory cache size: 33.2 MB
You could change your VM settings to allocate a multi-gigabyte minimum pagefile size to see if it makes any difference, in case LR is waiting on the VMM to allocate more and then gives up, but I’d expect LR is requiring actual RAM for processing images, not VM which is much , much slower.

A FIX for error message: When I try to open Snood (it's a game) I get this message. Not enough memory {Error # :: 0, in sound.cp@line 101 Can you help?

After years of playing Snood, w/o problems, I started getting this error message, on my iMac, OS 10.5.8,
with 4 GB of memory when opening Snood: Not enough memory {Error # :: 0, in sound.cp@line 101
My MacBook Pro w. Mac OS 10.6.8 did not have this problem.
Initially I thought that Snood raised its minimum requirement to Mac OS 10.6.
I had several correspondences with Snood. Their tech support is great. Quick and thorough responses.
They thought the issue was in Mac's system preferences/ Sound. It was.
I didn't realize that my sound input and output devices were gone.
The fix was resetting the PRAM. I found this advice on MacFixIt.com.
MacFixIt help with volume: http://reviews.cnet.com/8301-13727_7-10415659-263.html
Resetting the PRAM is on Apple support: http://support.apple.com/kb/HT1379
My sound (music!) is back, along with Snood. So glad I reset the PRAM before reinstalling the OS software!
Thank you to Snood, MacFixIt and Apple.
Happy new year all!

Good work, nice post/tip, thanks!

INTERNAL ERROR & NOT ENOUGH MEMORY error

Somehow 4 gig of memory is not enough!!
I am on Win Vista ultimate. intel Core 2 Duo 2.66 4 BG of
Ram.
And I'm working on a local hard drive with fat all else
running
I constantly get "Internal Error occurred...could not complete
request"
particularly alarming if that request was to save!!!!. I have
been using the 'fireworks autobackup" air app...save me heaps of
time...But its taking longer and longer to save the file as I work
on it.
If i save every 10 minutes !!!! its taking 1:20 to save..this
is 12% of my time...FW STILL sucks memory somehow..
any one with solution to this!!!???
Ive also had the "not enough memory" error a few times..In
which every thing done on the file is lost since last it was
opened...whether I saved it a million times or not. I've started
making copy backups and restarting FW every few hours to purge the
memory..but this sucks. This memory leak seemed to be mostly gone
in CS3 according to others so assumed CS4 had it sorted

One of our users is running across a similar issue using the
pen tool. A file that's 3000x2000 having sections cut out using the
pen tool will spike FW up to 2gig of used ram. Eventually the
Internal Error messages will start but, you can still trace your
path. The issue is it pops up every time you click a new point. The
only current work around I have for the user is to shrink the file
or decrease the dpi. Has anyone else run across this?
Specs
XP SP3
Core2 3.0ghz
4 gig ram.

P800 "Not Enough Memory" error when trying to use Contacts

Now even after I reset my P800 from iSync I get this 'Not enough memory' error when I try to use my contact list.
This is getting really frustrating! I want to downgrade...

I suspect it's the feed as I've just tried it and the latest episode fails. Try contacting the Podcast's producer/publisher to let them know, since they may not. From your linked page, click on their name and follow that to their website, where you should find contact details.
By the way, even if the problem is with iTunes, it's still down to the producer/publisher to rectify it, which is why I suggest you contact them
Phil

Not enough memory error when attempting export

Whenever I try exporting an 111Mb freehand file to a
pdf/gif/jpg/bmp/png I get a not enough memory error unless I set
the image quality to be very low. I am using Freehand MX 11.0.2 for
Windows. Does anyone know if there is asetting somewhere to prevent
this from happening?

> Whenever I try exporting an 111Mb freehand file to a
pdf/gif/jpg/bmp/png I get
> a not enough memory error unless I set the image quality
to be very low. I am
> using Freehand MX 11.0.2 for Windows. Does anyone know
if there is asetting
> somewhere to prevent this from happening?
Export and Import filters in FreeHand are not very good and
exporting large document as bitmap just can't be done. If you use
raster effects with high resolution export fails sooner or later or
at least takes even days.
To create a bitmap image I usually make pdf with Acrobat (the
only reliable way) and open it in Photoshop where you can define
dimensions, color space, etc. Photoshop opens some FreeHand created
eps and ai files too. Also Acrobat can export bitmap files.
Jukka

There is not enough memory error with 8gb installed

Description:
I'm getting an error when trying to copy or cut a collection of basic shapes in CS6 on Mac OS X 10.8.
It reads:
There is not enough memory to complete the operation.
To increase available memory, close other open documents or applications.
But when i check activity monitor there is plenty of memory available. I can succesfully copy a smal(ler) amount of shapes.
Steps already taken:
Tried copying after a system restart with no other programs running.
Tried adding more memory (i had 4gb originally, I just upgraded to 8gb).
I reinstalled Flash
I tried the same procedure (copying the same amount of shapes) on another machine with a similar amount of RAM and this works fine.
Is there a way you can allocate more memory to flash, or is this some setting that i'm missing?
Any help would be greatly appreciated!
P.s. I read this thread http://forums.adobe.com/message/3609214#3609214, and my problem is only different in that i don't have some huge files i'm dealing with. The .fla is only ~10mb.

Thanks for chiming in Mataxia.
One thing you can try is selecting the layers that have the shapes you want to copy. Then right click and choose copy layers. In my case this works even though selecting just the shapes (instead of the layers) will cause the memory error.
I'm using this as a workaround, but i can imagine that this isn't of any help in all cases.
This confirms my suspicions that this is a bug in flash. Would be great if someone from Adobe were reading this...

"There was not enough memory" error message when saving DNG and Jpeg

PC/Windows XP Pro. Pentium 4/2Gb RAM.
I am constantly getting memory errors when trying to save batches of images from ACR4 either as Jpegs or DNGs.
A couple of images in to the batch a small window appears with a list of the files and next to each of them is the line: "There was not enough memory."
These are 220Mb TIFF files that are processed in Hasselblad's Flexcolor on the same computer. I can process an entire folder full (sometimes 50 images) without a hitch in Flexcolor, but Bridge/ACR4 and CS3 can't handle any reasonable number of images.
Could it be something in my settings? For the record, they are:
In Bridge, under Edit/Preferences/Camera RAW preferences, Camera Raw Cache is set to 10Gb. Jpeg and Tiff handling boxes are both ticked.
Under Edit/Preferences/Cache, Cache Size slider is slightly over half way to the right.
In addition, I have CS3 pointed to a formatted 500GB scratch disk all to itself.
And CS3's RAM is set to 80%.
Finally, this computer is used for nothing else except image editing.
Any ideas?
Thanks.
D.

Thomas,
Thanks for the reply.
If you mean by "Public Beta", did I download the 10.4Mb plug-in (as per John Cornicello's link above) and install it at Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats in place of the old plug-in, then yes.
I always run ACR4 via Bridge, never via CS3. CS3 always comes after conversion in my workflow. Also, I like to give Bridge/ACR a free run of available resources. Nothing else is ever open when I'm running them.
In CS3 under Edit/Preferences/File Handling, under Image Previews I selected 'Never Save'. Not sure if this affects ACR though.
Also, as per the suggestion in the article referred to in my last post, I removed the tilde ~ to activate the Bigger Tiles plug-in. CS3's memory % is now set @ 90%.
The only thing I haven't done is to activate the Microsoft 3Gb switch. I can't find instructions that are clear enough. Also, it may be that it makes no difference when running Vista 64bit, as I am.
For what it's worth, with these fine tunings, CS3 now executes the Retouch Artist's Speedtest in 20 seconds, a shade faster than before. This is extremely fast, so my setup should not be the problem here. I hope! ;-)
Finally, is there any point in trying LR? Or is its file saving/cache setup the same as ACR's?
Thanks for taking an interest in my case. I'm very happy to be a guinea pig since I will constantly have to process large numbers of files and I'd like to overcome this problem
Many thanks.
D.

Cannot initialize Photoshop CS2 "not enough memory" error

I had Photoshop CS2 installed and running fine on a MacBook Pro (10.5.4, 2GB RAM), until it suddenly crashed and now will not open. Gives the error message: "Could not initialize because there's not enough memory." I have 1.5 GB of memory free, and 70 GB of disk space free. I've reinstalled, tried creating a new user to run it, but nothing is working. I've found a couple of mentions of the same problem online, but no solutions. Can anyone help me?

Hi Jen,
I don't know how MacBook works but it sounds like I just had basically the same problem which John Joslin had the correct answer. He said, "Try resetting your preferences as described in the FAQ at:
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)"
I have windows vista ultimate so I'm not sure if this will help you but my preferences were at:
C:\Users\username\AppData\Roaming\Adobe\Photoshop\9.0\Adobe Photoshop CS2 Settings. I just renamed my pref's and photoshop opened right up.
Good Luck!

Photoshop CS6 Not Enough Memory error

Just installed CS6 about a month ago and at different points of taxing the program and my system and on various tools or events in Photoshop, I get an error that tells me there is not enough ram to complete the task.
I've read a few other folks are having this issue - but the answer for them is usually a 32-bit/low amount of memory to begin with.
I'm using CS6 Extended 64-bit and my comp specs are:
Windows 7 Pro
16 gigs of DDR3 memory
Intel i-7 second gen chip
ATI Radeon 5500 with 2 gigs onboard memory
And all of my stuff is up to date - including PS. I've allocated 75% of the system memory to PS in the preferences.
Thoughts?

Final update as the problem seems to now be fixed.
I installed a second 1TB HDD that is completely empty and dedicated it as a scratch disk for PS. I then opened an image in PS and immediately got the error message that "could not complete command due to not enough memory (RAM)".
I restarted everything and tried to open the image again and got the same error message. So I went back to the forums and started looking. Found a post that suggested that you hold down Control-ALT-Shift while PS opens and reset all of the preferences in PS. I did and I haven't had a single issue since I did that.
I'm not sure why or how - but perhaps in the download and install of the latest version of PS things got scrambled.
Hope this discovery can help others as I did find a lot of folks complaining about the same error.

CS3 - not enough memory error (RAM)

I have a 3-month old MacBook Pro, Snow Leopard, 8 gb RAM. 75% alloted to Photoshop - is this too high? Must be the default, as I haven't changed it yet.
I am running CS3. Worked great for a few months, but lately if I have any other program open, I am unable to open up Black & White adjustment. I get this error message:
"Could not complete your request because there is not enough memory (RAM)."
If Photoshop is the only open program, I am able to do B&W but it is crippling to my workflow. I am only opening 1 or 2 photos at once.
Bridge also crashes almost daily when browsing RAWs and PSDs.
Seems like with 8 GB on a brand new machine this shouldn't be happening. Any ideas?
Thanks!

75% is rather a lot as it will not leave very much for the MacOS to page. Try reducing it to 60% and see what happens.
Its also important to make sure that there is a decent amount of free space on the hard disk as Photoshop will want to create a "virtual image" file on the HD when it runs low on RAM . . . 5Gb is minimum, although 10Gb is not a bad idea.
CS3 is also pretty old to be running on Snow Leopard, so there may be some issues there which are adding to your current difficulties.

ITunes 6.02 problem ("not enough memory error")

I attempted to update iTunes to the newest version yesterday, and for the most part everything went as planned. The application updated, everything seemed to be working afterwards.
The next time I went to open iTunes I get an error of "The iTunes application could not be opened. There is not enough memory available." Seems odd to me, but I quit out of everything and try again, still no iTunes. I can still open Photoshop, Flash, Logic Pro and other more memory intensive apps, but iTunes will not open.
Computer setup:
Dual 1.4Ghz G4 w/ 1GB RAM
Things I've tried so far:
Restarted computer
Repaired permissions
Reinstalled iTunes
Deleted iTunes prefs that I could find
Ran around screaming
So if anyone has any other ideas as to what to do, let me know. Is there a way to get a hold of an old version of iTunes? Any help would be appreciated.
Thanks,
Dave
PowerMac G4 Dual 1.42 Ghz/1GB RAM Mac OS X (10.3.9)

As long as I don't wear you out with this Unix command-line stuff, let's plug away at cracking this nut.
I'd be interested in seeing the 'top' headers immediately after a reboot. Check that nothing much is running in the dock. Then try iTunes right then. I know you've said you've done this, I have to ask anyway, sort of like Apple causes you to do stuff in their sequence when you call them.
I've never heard of 'SupportedApps.txt' find it and tell me what's in it. Does it mention iTunes? If you can't find it via Finder or Spotlight,
Type: find -x / -type f -name SupportedApps.txt -ls
That will search the entire boot drive for it.
361 Mb (+ 12 Mb should be plenty of memory to run iTunes.
Okay, did you add any codecs to your system recently?
Like me, I see you've installed DivX and Flip4Mac.
According to the trace, the last two files iTunes opened before it exited were both /Library/Preferences/.GlobalPreferences.plist
That seems a little odd to open and read in its contents twice in a row. Anyway that file seemed to indicate another codec called Soundflower?
com.apple.audio.CoreAudio.DeviceSettings.Soundflower_AudioEngine
That's one to dup and delete and retry iTunes.
As is the above GlobalPreferences file.
In fact, you might look at this list and try and figure which other ones to try getting out of the way. I say to dup and delete the original, as opposed to simply renaming the original, because those darn Mac aliases can locate a file even if you've renamed it, unlike Unix symlinks.
Every time you retry iTunes, recheck the most recently modified files in /var/log.
Note that all of the files listed below might not exist, they were attempts to open the named files.
This is the list of all plists iTunes opened:
# grep plist Trace-iTunes.txt | sed -n '/NAMI/{ s/^[^"][^"]*"//; s/"//; p; }'|sort -u
/.vol/234881026/2473/com.apple.iTunes.secure.plist
/Applications/iTunes.app/Contents/Info-macos.plist
/Applications/iTunes.app/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/Info.plist
/Library/CFMSupport/StuffItEngineShell.cfm/Contents/Info-macos.plist
/Library/CFMSupport/StuffItEngineShell.cfm/Contents/Info.plist
/Library/Frameworks/DigiMachOServices.framework/Resources/Info.plist
/Library/Frameworks/DigidesignFWDriver.framework/Resources/Info.plist
/Library/Frameworks/DigidesignUSBDriver.framework/Resources/Info.plist
/Library/Managed Preferences/davidhunt/com.apple.Classic.plist
/Library/Managed Preferences/davidhunt/com.apple.applicationaccess.plist
/Library/Preferences/.GlobalPreferences.plist
/Library/Preferences/Network/.GlobalPreferences.plist
/Library/Preferences/Network/com.apple.HIToolbox.plist
/Library/Preferences/Network/com.apple.help.plist
/Library/Preferences/Network/com.apple.iTunes.plist
/Library/Preferences/Network/com.apple.speech.synthesis.general.prefs.plist
/Library/Preferences/com.apple.HIToolbox.plist
/Library/Preferences/com.apple.help.plist
/Library/Preferences/com.apple.iTunes.plist
/Library/Preferences/com.apple.security-common.plist
/Library/Preferences/com.apple.speech.synthesis.general.prefs.plist
/Library/QuickTime/DivX 5.component/Contents/Info-macos.plist
/Library/QuickTime/DivX 5.component/Contents/Info.plist
/Library/QuickTime/Flip4Mac WMV Import.component/Contents/Info-macos.plist
/Library/QuickTime/Flip4Mac WMV Import.component/Contents/Info.plist
/Library/QuickTime/TSCC.component/Contents/Info-macos.plist
/Library/QuickTime/TSCC.component/Contents/Info.plist
/System/Library/Components/IOQTComponents.component/Contents/Info-macos.plist
/System/Library/Components/IOQTComponents.component/Contents/Info.plist
/System/Library/Components/VCH263Codec.component/Resources/Info.plist
/System/Library/CoreServices/SystemVersion.plist
/System/Library/Extensions/Apple02Audio.kext/Contents/Info-macos.plist
/System/Library/Extensions/Apple02Audio.kext/Contents/Info.plist
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents/Info-macos.plist
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents/Info.plist
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/H IServices.framework/Resources/Info.plist
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/Q D.framework/Resources/Info.plist
/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fram ework/Resources/Info.plist
/System/Library/Frameworks/CoreServices.framework/Resources/Info-macos.plist
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCo re.framework/Resources/Info.plist
/System/Library/Frameworks/QuickTime.framework/Resources/Info.plist
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Info-macos.pli st
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Info.plist
/System/Library/QuickTime/ApplePixletVideo.component/Contents/Info-macos.plist
/System/Library/QuickTime/ApplePixletVideo.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeComponents.component/Contents/Info-macos.plis t
/System/Library/QuickTime/QuickTimeComponents.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeFirewireDV.component/Contents/Info-macos.plis t
/System/Library/QuickTime/QuickTimeFirewireDV.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeH264.component/Contents/Info-macos.plist
/System/Library/QuickTime/QuickTimeH264.component/Contents/Info.plist
/Users/davidhunt/Library/Preferences/.GlobalPreferences.plist
/Users/davidhunt/Library/Preferences/ByHost/.GlobalPreferences.000a959af38a.plis t
/Users/davidhunt/Library/Preferences/ByHost/com.apple.Classic.000a959af38a.plist
/Users/davidhunt/Library/Preferences/ByHost/com.apple.HIToolbox.000a959af38a.pli st
/Users/davidhunt/Library/Preferences/ByHost/com.apple.help.000a959af38a.plist
/Users/davidhunt/Library/Preferences/ByHost/com.apple.iTunes.000a959af38a.plist
/Users/davidhunt/Library/Preferences/ByHost/com.apple.speech.synthesis.general.p refs.000a959af38a.plist
/Users/davidhunt/Library/Preferences/com.apple.Classic.plist
/Users/davidhunt/Library/Preferences/com.apple.HIToolbox.plist
/Users/davidhunt/Library/Preferences/com.apple.help.plist
/Users/davidhunt/Library/Preferences/com.apple.iTunes.plist
/Users/davidhunt/Library/Preferences/com.apple.security.plist
/Users/davidhunt/Library/Preferences/com.apple.speech.synthesis.general.prefs.pl ist
It's sorted alphabetically, and uniquely (no dups).
I don't know if they are higher priorty to test zapping, but these are the ones from the above list with 'iTunes':
/.vol/234881026/2473/com.apple.iTunes.secure.plist
/Applications/iTunes.app/Contents/Info-macos.plist
/Applications/iTunes.app/Contents/Info.plist
/Library/Preferences/Network/com.apple.iTunes.plist
/Library/Preferences/com.apple.iTunes.plist
/Users/davidhunt/Library/Preferences/ByHost/com.apple.iTunes.000a959af38a.plist
/Users/davidhunt/Library/Preferences/com.apple.iTunes.plist
Oh, there's that file:
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/SupportedApps.txt
// SupportedApps.txt
// This text file is used by the Digidesign CoreAudio driver to determine
// which apps are allowed to use it. Only apps listed in this file will
// be allowed to use the CoreAudio driver. APPLhook iTunes@ APPLEMAG Logic Audio@ APPLMOUP Digital Performer@ APPLa-lv Ableton Live@ APPLRSon Reason@ APPLRSa2 Reason (Digi Edition)@ APPLauFM Bias Peak@ APPLTVOD Quicktime@ APPLKeyG Final Cut Pro@
Well, there's iTunes listed in it.
I'm suspicious of QuickTime (for no apparent reason).
Pulled out of the above big plist output:
/Library/QuickTime/DivX 5.component/Contents/Info-macos.plist
/Library/QuickTime/DivX 5.component/Contents/Info.plist
/Library/QuickTime/Flip4Mac WMV Import.component/Contents/Info-macos.plist
/Library/QuickTime/Flip4Mac WMV Import.component/Contents/Info.plist
/Library/QuickTime/TSCC.component/Contents/Info-macos.plist
/Library/QuickTime/TSCC.component/Contents/Info.plist
/System/Library/Frameworks/QuickTime.framework/Resources/Info.plist
/System/Library/QuickTime/ApplePixletVideo.component/Contents/Info-macos.plist
/System/Library/QuickTime/ApplePixletVideo.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeComponents.component/Contents/Info-macos.plis t
/System/Library/QuickTime/QuickTimeComponents.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeFirewireDV.component/Contents/Info-macos.plis t
/System/Library/QuickTime/QuickTimeFirewireDV.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeH264.component/Contents/Info-macos.plist
/System/Library/QuickTime/QuickTimeH264.component/Contents/Info.plist
You might try zapping some of those.
Oh, you downloaded the Sims 2 via P2P using Azureus, just like me. Ya might want to take down yer trace file now
I'm surprised there's not something more in /var/log.
cd to /var/log, type: touch asl.log
type: chmod 777 asl.log
I'm not sure what asl.log stands for, but it sure gets a heck of a lot of stuff on my system.
That's it for now, you've got to plug away at those plist files. Someone just posted about a plugin (they are also a likely culprit). These are all the OSS references:
5204 iTunes NAMI "/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServ ices.framework/Versions/A/OSServices"
5204 iTunes NAMI "/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServ ices.framework/Versions/A/OSServices"
5204 iTunes NAMI "/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framew ork/OSServices"
5204 iTunes NAMI "/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framew ork/OSServices"
Here are the plugins from the big list:
grep NAMI Trace-iTunes.txt | grep -i plugin|sed -n '/NAMI/{ s/^[^"][^"]*"//; s/"//; p; }' | sort -u
/Library/Application Support/Missing Sync for Windows Mobile/Plugins/Address Book via iSync.app/Contents/MacOS/Address Book
/Library/Application Support/Missing Sync for Windows Mobile/Plugins/TimeSync.app/Contents/MacOS/TimeSync
/Library/Application Support/Missing Sync for Windows Mobile/Plugins/iCal via iSync.app/Contents/MacOS/iCal
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents/MacOS/Digidesign CoreAudio
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/SupportedApps.txt
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/MacOS/JackRouter
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/Resources/BlackList.txt
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/MacOS/iSightAudio
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents/Info-macos.plist
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents/Info.plist
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents/MacOS/AOAHALPlugin
/System/Library/LocalePlugins
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Info-macos.pli st
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Info.plist
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Resources
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Resources/Engl ish.lproj
Good luck!

"Not Enough Memory" Error when programming Keithley 2400 using LabView 6i

I'm trying to use LabView 6i drivers to control a keithley 2400 via GPIB interface. Most of the drivers work fine but the high level operations such as a the sweep functions or even functions that perform a single measurement gives a "Not enough memory" driver error. What doesn't have enough memory? A single measurement can't overload the PC's or Keithley's memory buffer so why am I getting the error?
Thanks for any help you can offer...
Evan

Evan,
That's not a LabVIEW, GPIB, or NI-VISA error code - that error is generated by the instrument driver. I went ahead and downloaded this driver from keithley.com to take a look at this Perform DC VI.vi function's source. But unfortunately, the heart of the Perform DC VI function is a "Call Library Node" call to a keithley DLL, so that is a black box. Also, no c-source included that I could find, so I could not look at that either. And since I don't have a Keithley 2400 to play with, that brings me to the end of the rope on my system.
A couple of more things you could try, however, since you actually have the instrument.
(1) Definately build a simple VI to eliminate other aspects of your program. In this case, the most simple
VI would be an Init, Perform DC VI.vi, and then a close. Make sure this simple program reproduces the error. If it doesn't, then the problem is likely introduced in your code, not the driver.
(2) If #1 reproduces the problem, then check that you have all the driver pre-requisites correct (ie, that NI-VISA is installed, that the GPIB board is working properly, etc).
(3) If #1 and #2 do not result in any discoveries, then you will have to enter the black box of that DLL. Primary method to do that, to be honest, is to contact Keithley and ask for help, since they developed the driver. Second method is to use our NI-SPY utility, which can capture all calls to VISA drivers, (since this is a VXIpnp driver, it should be fundamentally using VISA within the DLL). Within NI-SPY, you will be able to see the individual function calls, and which ones are returning errors. That may help point in the right direction.
Regards,
Greg Caesar
National Instruments
Applications Engineer

N82, Unable to install, Not Enough memory error, p...

Similar Messages

Maybe you are looking for