N82: Using memory card in computer

I just bought my N82 yesterday. Using the adapter included I tried inserting the mircoSD card in my computer. However, I can't access it but instead get a message that I need to format my card. Is this the way it supposed to be or is something wrong?

Maybe the cardreader in the computer is not properly working. Did you try to update the driver for the reader ?
Typical the SD cards are formatted according the FAT file system standard and therefor usable in a broad range of different computers/OS.
I once had this problem with a SD card which was not recognized under Vista. Vista disabled the SD reader driver for one or another reason and the card was not recognized. I suspect the root cause was a driver conflict with a portable HDD.
Nevertheless enabling or updating the driver should do the trick in this type of cases.

Similar Messages

  • Transfering pictures from memory card to computer

    Re: Transfering pictures from memory card to computer
    Options 
    ‎12-08-2014 05:04 PM
    Here’s my question,
    I have a new HP Photosmart 7520e all in one. I put my memory card in the slot but the printer screen does not show my computer as a destination option.  I'm using Windows 7.  Nothing at the computer end acknowledges that the card is in the printer slot. The computer is wireless hook up. How do I transfer pictures from the card to the computer?
    Thanks support team. My old HP Printer pooped out on me and I just got this new one hooked up. I have a card full of pictures I need to move into “My Pictures” but so far, my new HP doesn’t want me to. Stainless909

    My computer does NOT have a card slot or I would have use it to start with. Next: This sentence doesn't make any sense to me. (youyr answer) "You can map the card to network drive but why you have to do that hard ?"  I don't understand "maping net works".
    All my previous (4) HP printers had card slots (as this one does) but when I put my card in the computer would read it and ask me if I  was ready to import them and I picked the destination ... click on "import" and it happened. This one.. nothing happens on the computer but the printer screen gives me a choice of destinations (snapfish & usb cord) but does not offer an option of moving them to the computer. Are you not understanding my problem????  Would this be better resolved with a phone call? 951 769-8420 Thanks Bruce aka... Stainless909

  • Just installed elements 9 , plugged camera memory card into computer, I see it on my computer but adobe says can't find device ?

    just installed elements 9 , plugged camera memory card into computer, I see it on my computer but adobe says can't find device ?

    Perhaps the type of file on the camera card is not supported by elements 9 (I have elements 12 and all of my pictures are jpegs so I wouldn't know).  You might have to save the pictures you want to your computer as jpegs.

  • HP Photosmart 7510 using memory card to upload pictures to computer

    HP Photosmart 7510 all-in-one  Windows 7 4-bit
    Using a memory card to load pictures will only send them to Snapfish - how do I load them to My Pictures on my computer and not Snapfish?

    Hi,
    You have to map the card reader to your network as a drive. Please use the following instructions:
       http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00149194
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Problem transferring pictures from camera memory card to computer.

    Problem transferring pictures from my camera memory card to my computer.  When asked where to save them, it only gives me the option of saving to "Snapfish".  There is no option to save the pictures to my computer??? 

    I have a new HP Photosmart 7529e all in one. I put my memory card in the slot but the printer screen does not show my computer as a destination.  I'm using Windows 7.  Nothing at the computer end acknowlages that the card is in the printer slot. How do I transfer pictures from the card to the computer?

  • Transferin​g pictures from memory card to computer

    I have a new HP Photosmart 7529e all in one. I put my memory card in the slot but the printer screen does not show my computer as a destination.  I'm using Windows 7.  Nothing at the computer end acknowlages that the card is in the printer slot. How do I transfer pictures from the card to the computer?

    Thank you for clarifying Stainless909,
    In order to access the network card through the wireless network, you will need to map a networf folder to access the printer.
    Follow these steps to map a network path:
    From the printer front anel go to Setup, then open the Wireless menu.
    Select Display Network Configuration , then go to Display Network Summary  and write a not of the printer IP address.
    Open the Computer window by choosing Start → Computer.
    Click the Map Network Drive button on the toolbar to open the Map Network Drive dialog box.
    Type the printer's IP address with 2 trailing back slashes in front (e.g. \\10.0.0.1), then click on Browse and select the Memory Card folder.
    Click OK to confirm, ensure that Reconnect at Logon is checked and click on Finish.
    From now on you will have a drive to access the memory card ready under Computer.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Accidently formated N82's memory card...what can i...

    i have accidently formated my n82's memory now i cant find the map/dictionary etc any more, can i reinstall them?
    is there anything else i need to install as well?

    Welcome to Apple Support Communities.
    There are programs designed to retrieve data from flash memory cards and flash drives.
    These programs are not 100% guaranteed to work, and if the card was subsequently over-written with new data (took more photos before trying to recover), the retrieved files may be unusable.
    Check with the maker of the flash memory card to see if they offer a free or inexpensive tool for data recovery. Any tool should be able to read any flash memory card.
    I use an older Windows data recovery tool from SanDisk. SanDisk currently sells both Windows and OS X versions of their recovery tool called RescuePro in single-user and commercial versions.
    http://shop.sandisk.com/DRHM/store?Action=DisplayCategoryProductListPage&SiteID= sdiskus&Locale=en_US&ThemeID=9295600&Env=BASE&parentCategoryID=57159900&category ID=57160000

  • How to upload photos from memory card to computer on new Officejet 8500A Plus?

    I recently replaced an older HP psc 2410 photosmart printer with a new Officejet Pro 8500A Plus printer.  The installation went fine without error messages, and it prints, scans and copies just fine.  When I insert a memory card into the slot, the printer itself recognizes the files and displays them on the LCD screen and offers to print them.  BUT ... what I want to do is upload the files to my PC (running Windows XP), and I can't figure out how to do it!  There is no HP program that pops up and offers to transfer the photos like with my old printer.   I was also expecting to see the card slots shown as a removeable drive like I did with my old printer, but I don't see them.  Also, my Photoshop Elements program doesn't recognize the card slots either.
    Then it dawned on me that my computer doesn't "see" the card slots because it's not connected directly to the printer!  I set this up as a wireless printer and I am totally new to this, so pardon if this is a dumb question... but is there no way to transfer files from the card slot to the PC in a wireless setup??  I'm totally confused...
    This question was solved.
    View Solution.

    Hi,
    If your printer is connected thru network or wireless network, you have to access it thru the IP address.
    Find out the IP address of the printer. You can do this by clicking on the network icon on the front panel of your printer.
    Open Windows explorer and type \\xxx.xxx.xxx.xxx" where xxx.xxx.xxx.xxx is the ip address of the printer.
    You'll see the memory card slot there.
    You can do a "map network drive" to it if you want your printer card slot to be listed there permanently.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Using memory cards

    Is there any way that a memory card from a digital camera can be used on my G4. Is there a slot for it or a way to somehow get the pictures on there another way?

    Welcome to Apple Discussions Sheryl,
    To connect your memory card from you digital camera you can use the actual camera. Just hook the camera up by using the cable provided with the camera (if it came with one/compatible with Mac). That is one way of doing it. The other way cost some money. For about $20 on the Apple website you can buy a Media Card Reader. I'm not sure which kind of card you have depends on which one you need. Here is one that is pretty common with digital cameras
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/71707/wo/Y01rR9P algmo2MIxVsV1gDfwxol/4.SLID?mco=4F5425C4&nplm=T4374LL%2FA
    I hope that helps Sheryl.
    Jon

  • How can I install applications on my palm treo 600 using memory card and a reader???

    I tried so many times installing applications such as games and other software on my treo 600, but nothing shows in the launcher. I don't have a hotsynch tahts why this is my only option. I can see theapplications I download from my laptop to my treo 600.
    When I download using a pc, it is in zip file, then I extract it. Latly, copy paste to my memory card. Is there something wrong about it? Please help... I don't have any application on my treo 600. Its been a week exploring, but still don't get the answer.
    HELP!!!
    Thank You So Much
    -Rose
    Post relates to: Treo 600 (GSM)

    -vic0021- wrote:
    Thank you for the info...
    If I install the "myinstall", will it show automatically on the launcher??? If I buy a hotsynch in ebay, would that be better or mmc and a reader is fine? Will I als need the Cd? 
    Thanks again!!!
    Post relates to: Treo 600 (GSM)
    HotSync is a program, not something to be purchased on eBay!
    It is part of a free program from Palm called "Palm Desktop".  Go to the pages Hook directed you to, download and install the program.
    You can then install programs to your Palm correctly!  You will not need the CD.
    You will need a program called Documents To Go to easily use Microsoft Word and Excel files.  This will have to be purchased from Dataviz.com.  Be sure to look for a version that is compatible with your device.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Satellite L670-DX1 - after SP1 installation can't use memory card reader

    Hi
    Since I have upgraded my Satellite L670-DX1 from Win7 64Bits to Win7 64 bits SP1 (2 days ago) I can't use my memory card reader anymore, it always says it is a bad card and I should better reformat the card, with any card.
    Does anyone have a similar problem or even better a solution for me?
    Greetings

    yes i have installed sp1 using windows updater, i have tried to let the laptop search for new drivers, and i have the newest, i can't role it back because some virusscanning software makes it fail (allthough i made them inactive after cutting the wireless connection and before putting the old configurations back)

  • Use memory card of N81 installing apps from Ovi St...

    Hi,
    Is there any way to use the memory card of the N81 for install apps from the Ovi Store?
    Thanks in advance!

    Open Nokia Store on your phone and log-in..Then go to Options-->Account-->Settings-->Installation Preferences-->..and select Memory Card ..

  • Problems using memory card

    Hi!
    I bought few months ago memory card 4GB for my N95, for quite some time I'm having problems using it in terms of loosing data regularly. Though, I don't know if problem is in my phone or memory card I'm wondering is there any tool to check card or any other way to see what could be possibly wrong?
    Solved!
    Go to Solution.

    I wouldn't say permanent damage, but it is a good rule to format the cards first of all as most of these cards purchased over the counter are made for several different machines, and formatting it in the phone sets the MMC up for phone use.
    Its not essential, but i find it helps.
    There is no tool to check the MMC that i am aware of, but try the phone for a day without the card to see if the problem still occurs.
    If it does, you know its a phone fault or vice versa.
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

  • N82 Camera & Memory Card Problem

    Hello! After two months of careful operation and having the following problem: when you open the shutter of the camera, blinking charging indicator flashes, then a message "unexpected error occurred. Restart the device." Then, the phone does not "see" the memory card (included with delivery). Additional software is not installed. Resetting factory settings did. Memory card in other phones, Nokia tried it - everything is in order. Please define the problem. According to rumors, this is a common problem with this phone. Sin in the xenon flash. With the patience of waiting for a response.

    Do a nuclear reset then:
    Hold Green button + 3 + *
    Turn on the phone
    Keep on holding the 3 buttons until the shake hands appear.
    Choose your region and that should be done. Your lock code is now should be 12345 
    2B || !2B N900 1S TH3 F0N3 4 M3
    Please Kudos! me. To show your Appreciation

  • 2575 - Automatic paper sensor failed - when using memory card only?

    My parents are on their second HP2575, the second being a replacement. 
    In each case after 9 months the printer will not allow you to print photos from a memory card, they get the message "automatic paper sensor failed".
    You can print from the PC and scan its just from the memory card it doesn't work, can this be fixed?

    Hi,
    It seems to me that you have not created a proper sysidcfg file. From your post, it looks to me like your sysidcfg contains no entries. This is why it prompts you to enter the kernel path. Look on docs.sun.com for a guide to creating the sysidcfg file .

Maybe you are looking for