N82 warns always when disconnecting USB

Am I disconnecting my N82 somehow incorrectly from USB port? Always when I unplug the cable I get an error message "Data may have been lost. You should end data transfer before disconnecting the cable". (my own translation) That happens whenever I use USB cable in data transfer mode in my N82.
I use Windows's "safely remove hardware" before unplugging it. Windows says it is safe to remove the cable. In Linux I unmount the device before unplugging and there I get the same error message in the phone too.
It seems that the phone is scaring me without any reason. Do you always get the same error message too?

08-Aug-2008 02:33 PM
patc wrote:
Hey, they're right 95% of the time - that's not a bad hit rate
I'd say nearer 90% and declining. 10% (and rising) of computer users is a hell of a lot of people to neglect IMO. Even if I wouldn't be caught dead using it, Ubuntu is making huge inroads into Microsoft's dominance of the desktop market, especially with huge retailers like Dell now selling machines with Ubuntu preinstalled.
It's time for OEMs to start producing stuff that's much more O/S-neutral than it is now. Nokia has already made a step in the right direction by providing the "data transfer" connectivity mode, which makes the connected device behave just like a standard usb-storage device such as a pen drive or an external hard disk, and Pict-bridge. Trusting users to disconnect their mass storage device only when they should is the next step, especially as a) a lame warning like that is useless after the fact anyway and b) the computer emits a similar warning on systems where users potentially can't be trusted to do the right thing.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

Firefox warns always when closing multiple tabs, even when respective setting is cleared

Firefox warns always when closing multiple tabs, even when respective setting is cleared. "browser.tabs.warnOnClose" (and "browser.tabs.warnOnCloseOtherTabs" too) are in "false" state. The same behaviour after reset. Firefox 32.0.3, OS - Linux Mint 17.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT4245 i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.

i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.

To use factime on your Mac, I believe you will need to use your email address to do so instead of your wireless number. Since you can't make calls on the Mac.

LAN disconnects when removing USB device.

Hi. So I have a concern about my fairly new MSI board. Model: Z97 Guard-Pro. Sometimes when I plug/unplug a USB device from the backpanel 3.0 ports (lowest down set), my LAN will disconnect. My router connects to the mobo via an Ethernet cable which becomes disconnected. However the LAN does not disconnect when I INSERT a USB device, only SOMETIMES when disconnecting. Nevermind, it disconnects when insert and disconnect.
I then have to remove the Ethernet cable and plug it back in for it to recognise the Ethernet device. Sometimes it wont even recognise when doing that. I have to disable the adapter in Windows 7 and the re-enable for it to recognise. What can cause this issue?

Quote from: flobelix on 01-March-15, 19:05:06
Does the same happen when you just just touch the lan connector?
Just tried it now. Jiggled it left and right with some play in movement and it disconnected in Windows but that seems to be because the contacts aren't touching. Pushed it back in and it reconnected. However with the USB issue when I take the cable out and put it back in, sometimes the LAN adapter will still say disconnected. The LAN cable is not touched in any way and it will DC.

My Nano will not charge. It appears to be charging when plugged in, however when disconnected, there is no charge and I get a battery low warning. Do I need a new battery?

My Nano will not hold a charge. It appears to be charging when plugged in, however when disconnected there is no charge and I get a battery low warning. All other functions work properly when it is plugged in. Do I need a new battery?

Deager18 wrote:
My Nano will not hold a charge. It appears to be charging when plugged in, however when disconnected there is no charge and I get a battery low warning. All other functions work properly when it is plugged in. Do I need a new battery?
Depends on how long you have had your iPod. Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod. Or take your iPod Nano to your local Apple Store or an AASP.

I need when the USb become disable it should convert to camera mode without physical disconnection, I m using Sony w50

>I hv Sony w50. I Connect it with PC. As i connect camera with PC, camera got
>in USB mode. But after Disabling the USB the camera remains in USB mode
>until i disconnect it physically from pC.
>Problem is that i wanna remain the connection between Camera and PC and
>shoot from Camera without physical disconnection.
>I need when the USb become disable it should convert to camera mode and when
>it would be enable it returns to USB mode. Hope u all understand my prob. I
>m waiting for ur kind reply. I will be very thankful to ur consideration.

abbotpar,
I think that the best way to find out what you need to know would be to contact Sony. We aren't as familiar with specific cameras as the camera manufacturers are. Sony would know if it were possible for you to take images while the camera is plugged into the computer. If you have questions about our software or want to know about our framegrabber cards let us know. Thank you!
-Allison S.
Applications Engineering
-Allison S.
Calibration Services
Product Support Engineer

Why does "low battery" warning always come up when I start the iMac?

I've been getting a "low battery" warning lately when I turn on my computer. I've tried 3 sets of new AA batteries (bought from 3 different stores), but that doesn't seem to help. Of course it could be caused by the unlikely event that all three "new" battery packs were not fresh, but that's unlikely.

and you're talking about the mouse ... the keyboard ... ?
also, does the message vanish after a while? what does the battery indicator say?

Why does my 23 ACD go black when its USB-hub cord is connected to computer

When I connect the USB - hub cord of my 23 ACD to the back USB port of my G5 quad, the display instantly goes black (shuts of) and back on and to normal operation again, when USB is disconnected. Why is that ? When I start up the computer with the displays USB cord connected and display powered, it turns off when computer starts. Does anyone know
any reason for this or, better still, a fix to this problem ?
G5 quad Mac OS X (10.4.10) 23 ACD

I have this exact same problem. It is only a recent occurrence and my screen is just about 1 year old. When the USB cord from the ACD is plugged into the back of my Mini, the screen goes black. When the USB cord is removed, the screen powers on as normal. I do get the device removal warning when I remove the USB cord, but other than that, nothing. I've seen in a couple of other posts that this isn't an unusual problem and maybe it's not worth getting it fixed. Is this the consensus? I'm planning to get a USB hub anyway.

My imac always complains about usb using to much power

my imac always complains about usb port using to much power and the window pops up like every 5 seconds
please help
elvis007

If the keyboard is the only USB device connected when you get the error something else is going on. If a PRAM zap does not stop the error warning, you will need to take a trip to your local Apple Store or an AASP. If you have AppleCare, call them first.
Another thing you can try is to run Apple's Hardware Test from system CD #1 (the one that originally came w/your computer).

How to see iPod in DEVICES even when disconnected

Hello everyone,
I previously was running (v6?) of iTunes, but today upgraded it to v7 because I was unable to listen to iTune purchased music on the iPod. Thankfully that and an upgrade to the iPod shuffle s/w to 1.1.5 has cured that problem.
However whereas previously even when they were disconnected, I was able to see our 2 iPods in the DEVICES section of iTunes, now they disappear altogether until they are connected via the USB cable. I can't remember how I got iTunes to continue in showing the iPods when disconnected, presumably it was in one of the menu options somewhere, but after going into each of the menus on v7 I cannot find what I need to do. I've tried searching the apple web-sites, these forums, google etc, but cannot find anything anywhere on how to do this in v7.
Hopefully someone will be able to answer my question.
Thanks
Ian S.

Why in the world did Apple remove a useful feature from itunes? Probably because it was so poorly implemented in itunes 6 that no mortal windows user could figure out how to turn it on or off. I'm still praying that the competition will develop a player as good as the ipod so that I won't have to be a slave to this infuriating software.
Sorry. I just need to rant. I'm tired of continually being forced by Apple to rethink how I organize my data. How nice it would be if there was really a windows version of itunes that allowed windows users to retain their boring but trusted ways.

External displays - browser window position when disconnected display

I'm using a laptop, connecting one or two external displays, - one using the HDMI port, second using an USB "dock station" (Toshiba standalone). Second screen normally to the right, third screen (usb) above the laptop screen.
Often when I have disconnected the USB external display, my Firefox browser window are still "on the third display" - position as if this display was still active.
Even if I quit Firefox and restarts ( or even restarts windows ) the same position window is retained. The only way to fix it (when the USB connected display is not available), is to change the window position of the second (HDMI) display to cover the area of the USB one, then move Firefox window to my main laptop display, and then reposition the second screen back to the normal.
Normally, I expect applications to automatically reposition the windows to the available display(s) under the conditions that an extra display is removed. However, this seems not to happen with Firefox. It's inconvinient, but possible to fix with the second screen available, but I'm lost when I am not able to connect an external display ...
Is there any solution to this? Is it possible to change (reset) window positions directly in RegEdit ??

Dear varkgirl:
Thank you very much for your help and valuable suggestion.
I've tried your suggestion but ran into some problems. The links I am trying to open in another window are actually PDF files that the viewer can download from my website.
Since I was having problems I decided to try something else. After publishing the website to my desktop I then opened the pages where the links are in Dreamweaver. The layout view is great and displayed the image just the way it appears on the browser's window. I first selected the "link button" to the file and then in the inspector windows (bottom of the page) I chose under target the "_blank" option. This tells the software that the linked page or file is to be opened in a new blank browser window. I then saved the page (re-saved it over the existing file) to incorporate the changes. After this I proceeded to navigate through the website and everything works great.
Thank you for your help and suggestions. I just thought I would post this here in case it may be of help to you as well as others.
Best regards,
Joseph Chamberlain

No sound when AT2020 USB mic is connected.

Followed set up instructions I can see logic pro x recognizes the mic but I get no sound. I will only get sound from my USB keyboard when the USB mic is disconnected.

Did you select the USB audio in the audio menu ? Have you created an audio track on the arrage page and selected the proper input source (AT2020 USB) and lastly did you record enable the audio track or the (I) at the bottom of the channel strip to audition the incoming audio signal?

"Warn me when closing multiple tabs" doesn't work

Under Tools > Options > Tabs, "Warn me when closing multiple tabs" is selected. Also, in about:config, browser.tabs.warnOnClose is set to "true". I always have multiple tabs open. However, sometimes my hand slips or the mouse falls off the table and Firefox closes without any warning.

I had this problem too a few monthes ago,
sorry don't remember how I solved the problem...
BUT a general TIP is that you sometimes should fully reinstall Firefox from the scratch.
I mean save your bookmarks (json), have a list of your add-ons,
preferably with their url too, and one for your plugins too, everything safe in a folder in your documents...
And only then "shoot away" Firefox from your computer, profile included...
make a full cleaning of everything belonging to Firefox.
(with Glary utilitises, CC cleaner or any soft alike)
Reinstall everything with the latest Firefox.exe !
This especially if you're used to ( as I am) try new adds, make changes
in about:config... and so on.
I guess it comes because with the "normal way of updating", which I suppose is the case for most people, just to download the updates, Firefox, after a few monthes,
starts to mess a little things around.
And even "Speedyfox" nor defragmentation can't help that much...
Personnaly, I don't like so much to do it, but like that, usually my Firefox works fast and well.
Another solution is to use "FEBE" add-on...
I wish this "general tip" will help some of you, or at least give some indications,
on how you want to solve some Firefox problems :-)
Note : depending on how many add-ons you have, this may take ~30minutes up to 3 hours (:-(), if you have never saved anything before (list from your adds).
PS Me ? I save everything quiet often, because I once lost, years ago, everything concerning Firefox because I did a main mistake (lost all my bookmarks)... and told myself : Not Twice... :-)
Happy Christmas ! :-)

Warn me when closing multiple tabs is not checked, but I still receive the warning when closing multiple tabs

After installing Firefox 16.0.1, I always get a warning whenever I close multiple tabs, even though there is no check mark against the option, "Warn me when closing multiple tabs".

This a recent bug problem. In other versions do no exist. Some users like warnings, but others not, like me.

Always get disconnected?

I have a macbook and i am using a linksys system N wireless router. Its 2 feet away. Now the problem i am having is i am always getting disconnected at night from everything. I will be on yahoo instant messenger, aol instant messenger and the enternet and all of a sudden it will disconnect me but it wont let me know. The way i find out is that none of my friends reply to what i sent them and i cannot access anything online. Is there something that i can do to stop this? This just started happening? What can i buy to fix this or what should i do. Thax so much for any help Thax.

Linksys has some problems with it and connection mostly because there are so many people that have them. I had the same problem you're having. The reason it's a problem for other people to have them is that they have a specific IP address on the router, but most of their routers have the same thing. You're computer will be surfing along and if it gets even a hint of the same IP from another router, it will accidentally hook on to that one, and drop your connection. The way to solve this is to put a password on your router. In safari, type in at the top http://192.168.1.x and with x it's either going to be 0, 1, or 2. If it asks for a password, the default password is ADMIN and there is no user name. If it doesnt ask for a password, just try one of the other numbers for x. Go into the wireless settings in there. Go into Wireless security from there and set it to WPA personal. Set a password for it and then save all the settings. Try it again from your mac. Having a password encryption on the connection usually solves the dropped connection problem. When you are doing all the router work though, it's best if you plug you computer directly into the router if possible. Hope this helps!

N82 warns always when disconnecting USB

Similar Messages

Maybe you are looking for