N82 WLAN and GPS

Not sure what I did but my WLAN scanning does not show on the screen. I installed the latest version firmware. No change. In the tools page, when I select WLAN, I get 'System error". Wireless lan works ok but GPS not funtioning. Any ideas?
Thanks

Check your positioning settings first: what is your access point there, and what is your positioning server address? The access point should be a GPRS access point, defined by your service provider. Write down your default positioning server address and replace it with supl.nokia.com that usually works well. If it won't, you can always return back to your default server. Usually the server is automatically correct on N82.
You can't use WLAN connection for the Assisted GPS and most likely also WAP is out of the question. You'll need to use a GPRS connection in order to get the current satellite status without waiting outside for several minutes. If you don't have a GPRS data subscription, you're out of luck. Contact your service provider for this.

Similar Messages

N82 WLAN and Bluetooth Headset

Hi Guys,
I have two problems:
1. I have a Nokia Bluetooth headset HS-36W and my Nokia N82 does not seem to detect it. However, my Nokia 7610 was able to detect it and I was able to use the headset. Is HS-36W not compatible with Nokia N82?
2. I tried using WLAN but was a failure. The connection was open so NO user ID or passwords were required. Error was WEB: NO GATEWAY REPLY. Others using a laptop was able to access the network. Is there any problem or is there something required from me to do?
Appreciate your advice.
Many thanks!
SW: 20.0.062

Check your positioning settings first: what is your access point there, and what is your positioning server address? The access point should be a GPRS access point, defined by your service provider. Write down your default positioning server address and replace it with supl.nokia.com that usually works well. If it won't, you can always return back to your default server. Usually the server is automatically correct on N82.
You can't use WLAN connection for the Assisted GPS and most likely also WAP is out of the question. You'll need to use a GPRS connection in order to get the current satellite status without waiting outside for several minutes. If you don't have a GPRS data subscription, you're out of luck. Contact your service provider for this.

GPS not available only WLAN and Basestations

Hello,
in my iPhone 4s GPS is not available, only WLAN and Basestations are used to show location on Maps. On my iPhone 4 everything works fine. Both on iOS 6.0.1
Device already reseted.
What else do I have to do.
Best regards
Reiner

I've had limited success using G spot (App from the Apple store) which seems to find my location by using my WIFI which is also registered with Skyhook and then using it to launch maps. Even though G spot works, google maps still doesn't locate me, but luckily G spot will place a pin drop on your location within maps at the touch of a button.
Thus this may be a workaround for now. G spot also seems seems to work with my wifi off, but I don't know if it's just using a cache of my last known location. I haven't tested in places aside from my flat yet, but will do so very shortly and I will report back whether using a third party app, such as G spot works at obtaining your location which can then be feed into google maps.
Gspot is not free (though it's not expensive). Luckily I had it due to the compass it provides. However one can test whether 3rd party apps work for you or not in obtaining your location for free by downloading either of the 'here i am' apps from iTunes and having it email your location to yourself and then opening the link from the email, which launches maps and pin drops your location. Though this will not provide live GPS on the 3G, but it will atleast give you a general location and a map if you're lost until Apple sorts out their ****!

N8 - Web site and GPS Positioning

How do I allow a website to use the phones gps to locate me on a map. Can I allow specific websites or the browser in general to use the gps positioning.
Or is there some way that I can turn on the phones gps manually when the website asks?

The website I’m talking about is m.fisketegn.dk which is a danish fishing website. I push the map icon which you can see in attachment 1. It is then suppose to show my location on a map so that I can see if I’m fishing in a spot I’m not allowed to fish. But when I push the icon the pop up in attachment 2 shows up which says “You must activate the phone’s Gps/Wlan positioning to show map with your location” but when I push OK nothing happens. The Gps does not activate and it does not show my location on the map.
I’m not getting a pop up which asks if I allow it to access positioning data. That’s what happens on my brother’s Iphone. He clicked Ok to that and then it worked. I thought that I could find that in the settings somewhere so that I could allow that. I can’t remember if I at some point on some other website clicked No to allow it to access positioning data, but if I did I must be able to change that somehow. I know that I have not clicked No on this particular website. By the way I’m using the native browser.
I just tried it on Opera Mobile and it asked for permission to use positioning data but it only appears to use Wlan and not the Gps. But it does show my location on the map. But if it only uses Wlan and not the gps then the location is not accurate enough.
Attachments:
Attachment 1.jpg ‏29 KB
Attachment 2.jpg ‏27 KB

N95-1 vs N82 build-in GPS???

See http://www.youtube.com/watch?v=MdG3s-l25Ag
How you can see the N82 build-in GPS work better and realy can use it!!! But the N95 - have poor GPS!
Why people that purchcase more money for N95 (300-400Euro) that for N82(250-300) - have poor GPS???
Nokia! Take a care for me and we real say THANK YOU NOKIA and you can collect a more money

02-Sep-2008 02:08 PM
psychomania wrote:
This topic was discussed many times last year when the N82 was released.
The N82's GPS works better because of the location of it's GPS receiver. You also have to remember that the N95 was the first model to includes an internal GPS so it's only natural that later models will work better.
The GPS on the N95 works well if you make sure you are using the latest version of nokia maps and follow the guidelines (i.e. make sure the slider is open, don't use it indoors etc). It also helps to have it set correctly so that it can use A-GPS and network based positioning.
My father has a v20 N95-1 and uses almost daily as a sat-nav. He uses it in a cradle attached to the car windscreen with the slider open. He has A-GPS enabled to make sure he gets a quick lock (less than 30 seconds using the latest version of nokia maps).
Judging by the amount of posts you have made about it lately you are obviously having problems with yours. Have you considered that it could be faulty? Perhaps a visit to the care point is needed? Or maybe you just need to read the guidelines for correct use?
Message Edited by psychomania on 02-Sep-2008 11:09 AM
Ok i try visit care point - but what if in care point me say that it's a poor quality build-in GPS in my N95 and care point can't solve this problem?
Message Edited by leonfreeman on 02-Sep-2008 03:00 PM
Nokia! Take a care for me and we real say THANK YOU NOKIA and you can collect a more money

N82 Built in GPS

straight from the horses mouth. NOKIA. The N82 has GOT Built in GPS. No idea why its cheaper than the N95.
Its not who i am underneath. But what i do that defines me.
You are here for a reason Superman.
"Come to me son of Jor-EL. KNEEL BEFORE ZOD"

Guys, not only N82 has a GPS, but it works as a snap - faster and more sensitive than N95 (firmware 12.0.013).
In a building where N95 got no satellites, N82 received signals from 5 (one bar only, though with no position available).
Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
If I've helped, use the Kudos button to thank

LG Ally text message and gps problems

hello. ive been with verizon for about 10 years maybe. ive been overall happy with the service and customer service. but the prices should be alot lower.lol. i started out with the motorolas then switched to the lg phones. only problem with the motorola was the speakers. not loud enough. could never hear the phone ring. the lgs usually suffer from the same problem.
i had a few phone problems but nothing like this lg ally. im on my second one and about to be my 3rd one in about 3 months. 1st phone i had every problem under the sun. this phone i am suffering from text message problems and gps problems. i suffer from what everyone else has problems with. the messages wont send. they will eventually lock up. it will show the envelope with the red explanation point ( i think thats the graphic). then usually everytime when i sent a text the texts will close. it will send then bounce back and show up as a draft and i have to resend it and wait for it to go thru. finally the last problem with the texts. when i send a text a phone number from my contacts shows up and freezes on the screen. its in white text with a black background. its the same number every time. it stays on the screen until i restart or pull my battery out.
gps. when i open up google gps that comes with the phone i make sure the gps is on... when the directions are found and the map pops up 9 out of 10 times it just keeps saying searching for gps. the turn by turn never is found. the 1 time it does it takes a good 10 minutes to be found. atleast on my first one ally the gps did work 8 out of 10 times. it just took a good 5-10 minutes for gps to be found and show turn by turn.
anyone else have these problems? where you able to fix them or did you need to get a new phone? the 2.1 update was supposed to fix problems. i think they just made it worse. the ally is supposed to have 2.2 froyo. where is it. is it ever going to get it. i got this phone because i like the lgs and the keyboard. also the sales representative on the phone was giving the lg ally rave reviews. why couldnt he say dont buy this go with a motorola droid. this phone is the biggest junk ever made

I do apologize you are having trouble with your device I looked in our information system on the LG Ally in reguards to issues you are having it states if you have the Free Droid Security anti virus protection application down loaded it will cause the phone to lock up or freeze. Check and make sure you do not have the application on your device. Check you GPS settings and make sure correct. Go to Settings; Location & Security; make sure GPS is on wireless network. If this does not fix issue you can try doing a Master Reset on your device. Make sure your contacts are saved in your G-mail account or through Back Up Assistance.
Master Reset/Soft Reset:
Factory Reset option 1
From the main screen, touch menu tab
Touch Settings
Touch Privacy
Touch Factory Data reset
Touch Reset Phone
Warning: This will erase all data from your phone, including:
Your Google account
System and application data and settings
Downloaded Applications
It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
Factory Reset option 2 - Warning this will reset device back to original factory settings.
Turn off the phone
Press and hold "home" + "end" + "volume up or down" keys together for a few seconds when the device is power off
Once device displays boot information, release keys.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
or
Remove battery cover, remove battery and reinstall.Also there is a new update for LG Ally it will be the Froyo 2.2 but there is not release date available at this time it will post on your device when available. Hope this Helps. Leslie

Windows 7 Ultimate (64-Bit) fresh install, only WLAN and video driver installed but EXTREMELY slow internet connection...

I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
also with the WLAN connection. My ISP has checked their side and everything is fine.
To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
o/s to W7-Ult.
Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
Thanks in advance to all and for any advice.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
Steam or the like causing interference.
I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
my Asus machine.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

I have a dv8t-1000 and the wlan and treble keep going on and off. I loose the wireless connection.

I need to know how to open the laptop to replace the card that controls the wlan and treble. I tried to find a manual to show how to get the laptop open and then be able to get the card number so I can order one. I have removed the screws but can't get it appart. Can you tell me the type of card that I would need to resolve the problem so I don't loose the wireless conection every 5 minutes.
Thanks
highdiver

The Maintenance and Service guide, which you can find here, can show you how to replace your wlan card.
I am an employee of Hewlett Packard.
- - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
- - Please click the Kudos star if you would like to say thanks - -

Belle: No WLAN and Packet Data log.Filter options ...

In Nokia N8, with Symbian Anna, WLAN and Packet Data logging wasn't possible, even though there were options in the log filtering settings.
See below:
http://i44.tinypic.com/9kxbfa.png
After updating to Belle, log isn't still working, and both WLAN and Packet Data options were removed from filter options.
http://tinypic.com/r/6dxwgg/5
Will it be implemented in a further time?
Best Regards

Hi,
quick update on this one as we now have a FAQ online.
Q: How can I get a WLAN/Wifi and packet data filter with Nokia Belle?
A: There is no data filter included in Nokia Belle by default, but you can download specific apps from Nokia Store.
BR,
yvonne

IOS4 and GPS Errors

I live on the Mississippi and for the last week the GPS function on my iPhone 3G - upgraded to iOS4 - and my new iPhone 4 puts my location in Fort Walton Beach, FL instead of Diamondhead, MS. The same error occurs when I'm at work at Stennis Space Center.
Interestingly, my bosses iPhone 3GS that hasn't been upgraded to iOS4, and my iPad, both properly indicate my location. Friends and colleagues with phones upgraded to iOS4 are all in Fort Walton Beach, FL.
What gives? I know the GPS is assisted in determining location by local cell towers, but it seems that iOS4 is not verifying the location using the GPS chip.
This really ***, as all location-aware applications are now hosed.
Mike

Quick update for everyone. I got fed up with the no gps issue and ended up going to the apple store. The genius gave me a replacement phone and gps seemed to work fine on the replacement, but the touchscreen had issues. I then returned that replacement and got a second replacement which is having the same GPS inaccuracy as my original phone. This is obviously a software bug with ios4 that apple has yet to address. Frankly I am tired of apples lack of quality control in their recent products and will be looking for an alternative as soon as my contract with AT&T expires. What a shame.

Guest WLAN and Web Auth?

Hi Guys,
Maybe someone can help me out?
I just finished setting up a trial "Cisco Virtual Wireless Controller" with nearly the same configuration as our Physical
"Cisco Wireless Controller" with the exception of having 2 ports. Anyhow, I managed to get everything working except for the WEB AUTH on the Guest WLAN. When a client connects, he gets a DHCP address from our ASA but when we try to get to a website, we never reach the WEB AUTH page.
What I tried so far is..
add a DNS Host Name to the virtual interface and assign it to our internal DNS server.dns name was resolving but we were unable to ping 1.1.1.1
changed the virtual ip from 1.1.1.1 to 2.2.2.2 and modified the DNS entrydns name resoved but still could not ping 2.2.2.2(I think this is normal)
changed the virtual IP to a private address of 192.168.102.1 and modified the dns entrysame result
I've attached some screenshots of our configuration.

Troubleshooting Web Authentication
After you configure web authentication, if the feature does not work as expected, complete these
troubleshooting steps:
Check if the client gets an IP address. If not, users can uncheck
DHCP Required
on the WLAN and
give the wireless client a static IP address. This assumes association with the access point. Refer to
the
IP addressing issues
section of
Troubleshooting Client Issues in the Cisco Unified Wireless
Network for troubleshooting DHCP related issues
1.
On WLC versions earlier than 3.2.150.10, you must manually enter
https://1.1.1.1/login.html
in
order to navigate to the web authentication window.
The next step in the process is DNS resolution of the URL in the web browser. When a WLAN client
connects to a WLAN configured for web authentication, the client obtains an IP address from the
DHCP server. The user opens a web browser and enters a website address. The client then performs
the DNS resolution to obtain the IP address of the website. Now, when the client tries to reach the
website, the WLC intercepts the HTTP Get session of the client and redirects the user to the web
authentication login page.
2.
Therefore, ensure that the client is able to perform DNS resolution for the redirection to work. On
Windows, choose
Start > Run
, enter
CMD
in order to open a command window, and do a nslookup
www.cisco.com" and see if the IP address comes back.
On Macs/Linux: open a terminal window and do a nslookup www.cisco.com" and see if the IP
address comes back.
If you believe the client is not getting DNS resolution, you can either:
Enter either the IP address of the URL (for example, http://www.cisco.com is
http://198.133.219.25)
♦
Try to directly reach the controller's webauth page with
https:///login.html. Typically this is http://1.1.1.1/login.html.
♦
Does entering this URL bring up the web page? If yes, it is most likely a DNS problem. It might also
be a certificate problem. The controller, by default, uses a self−signed certificate and most web
browsers warn against using them.
3.
For web authentication using customized web page, ensure that the HTML code for the customized
web page is appropriate.
You can download a sample Web Authentication script from Cisco Software Downloads. For
example, for the 4400 controllers, choose
Products > Wireless > Wireless LAN Controller >
Standalone Controllers > Cisco 4400 Series Wireless LAN Controllers > Cisco 4404 Wireless
LAN Controller > Software on Chassis > Wireless Lan Controller Web Authentication
Bundle−1.0.1
and download the
webauth_bundle.zip
file.
These parameters are added to the URL when the user's Internet browser is redirected to the
customized login page:
4.
ap_mac The MAC address of the access point to which the wireless user is associated.
♦
switch_url The URL of the controller to which the user credentials should be posted.
♦
redirect The URL to which the user is redirected after authentication is successful.
♦
statusCode The status code returned from the controller's web authentication server.
♦
wlan The WLAN SSID to which the wireless user is associated.
♦
These are the available status codes:
Status Code 1: "You are already logged in. No further action is required on your part."
♦
Status Code 2: "You are not configured to authenticate against web portal. No further action
is required on your part."
♦
Status Code 3: "The username specified cannot be used at this time. Perhaps the username is
already logged into the system?"
♦
Status Code 4: "You have been excluded."
♦
Status Code 5: "The User Name and Password combination you have entered is invalid.
Please try again."
♦
All the files and pictures that need to appear on the Customized web page should be bundled into a
.tar file before uploading to the WLC. Ensure that one of the files included in the tar bundle is
login.html. You receive this error message if you do not include the login.html file:
Refer to the Guidelines for Customized Web Authentication section of Wireless LAN Controller Web
Authentication Configuration Example for more information on how to create a customized web
authentication window.
Note:
Files that are large and files that have long names will result in an extraction error. It is
recommended that pictures are in .jpg format.
5.
Internet Explorer 6.0 SP1 or later is the browser recommended for the use of web authentication.
Other browsers may or may not work.
6.
Ensure that the
Scripting
option is not blocked on the client browser as the customized web page on
the WLC is basically an HTML script. On IE 6.0, this is disabled by default for security purposes.
7.
Note:
The Pop Up blocker needs to be disabled on the browser if you have configured any Pop Up
messages for the user.
Note:
If you browse to an
https
site, redirection does not work. Refer to Cisco bug ID CSCar04580
(registered customers only) for more information.
If you have a
host name
configured for the
virtual interface
of the WLC, make sure that the DNS
resolution is available for the host name of the virtual interface.
Note:
Navigate to the
Controller > Interfaces
menu from the WLC GUI in order to assign a
DNS
hostname
to the virtual interface.
8.
Sometimes the firewall installed on the client computer blocks the web authentication login page.
Disable the firewall before you try to access the login page. The firewall can be enabled again once
the web authentication is completed.
9.
Topology/solution firewall can be placed between the client and web−auth server, which depends on
the network. As for each network design/solution implemented, the end user should make sure these
ports are allowed on the network firewall.
Protocol
Port
HTTP/HTTPS Traffic
TCP port 80/443
CAPWAP Data/Control Traffic
UDP port 5247/5246
LWAPP Data/Control Traffic
(before rel 5.0)
UDP port 12222/12223
EOIP packets
IP protocol 97
Mobility
UDP port 16666 (non
secured) UDP port 16667
(secured IPSEC tunnel)
10.
For web authentication to occur, the client should first associate to the appropriate WLAN on the
WLC. Navigate to the
Monitor > Clients
menu on the WLC GUI in order to see if the client is
associated to the WLC. Check if the client has a valid IP address.
11.
Disable the Proxy Settings on the client browser until web authentication is completed.
12.
The default web authentication method is PAP. Ensure that PAP authentication is allowed on the
RADIUS server for this to work. In order to check the status of client authentication, check the
debugs and log messages from the RADIUS server. You can use the
debug aaa all
command on the
WLC to view the debugs from the RADIUS server.
13.
Update the hardware driver on the computer to the latest code from manufacturer's website.
14.
Verify settings in the supplicant (program on laptop).
15.
When you use the Windows Zero Config supplicant built into Windows:
Verify user has latest patches installed.
♦
Run debugs on supplicant.
♦
16.
On the client, turn on the EAPOL (WPA+WPA2) and RASTLS logs from a command window, Start
> Run > CMD:
netsh ras set tracing eapol enable
netsh ras set tracing rastls enable
In order to disable the logs, run the same command but replace enable with disable. For XP, all logs
will be located in C:\Windows\tracing.
17.
If you still have no login web page, collect and analyze this output from a single client:
debug client
debug dhcp message enable
18.
debug aaa all enable
debug dot1x aaa enable
debug mobility handoff enable
If the issue is not resolved after you complete these steps, collect these debugs and use the TAC
Service Request Tool (registered customers only) in order to open a Service Request.
debug pm ssh−appgw enable
debug pm ssh−tcp enable
debug pm rules enable
debug emweb server enable
debug pm ssh−engine enable packet

Guest WLAN and a Office WLAN on 1242AG

Hi All,
I have managed to add two WLANS, one for the Office Wireless clients(Staff laptops) and another one for Guests. I have bassicaly created two SSIDs, one broadcasting, other one not(Staff one).
The AP is a 1242AG and is going to connect to a Catalyst 3750 48T, which is connected to Cisco 877. How can I make the DHCP assignments to both Guest WLAN and Staff WLAN and also do I have to create trunk port in the Switch ( I am thinking like this as I got Two VLANs.)
Does anyone know or got a sample running config ( in a Switch and in a similar AP)...really appriciate it. Time is running out for me!!!
Reg
ND

Hi,
here is a config example for exactly you are looking for:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665ceb.shtml.
HTH,
Tiago

Vista x64 drivers for Broadcom BCM4311 wlan and touchpad

Hello!
Where to download a Vista x64 driver for a Broadcom BCM4311 wlan and touchpad for a Lenovo 3000 G410m-mm? A Windows update wlan driver allows a two times slower speed.
Regards,
Dmitry

Try this.
//help will save the world

Time and GPS data windows

Hello all
I was presented this sample 1080 frame and was asked if I can do this if time and GPS metadata were part of the video recording. In other words, how do you burn in this data in the video itself. I have P Pro CS 6 @ home and am a complete novice to video editing. Final product may or may not need this, more curious as to how its done - special camera system or in post processing?
Thanks!

If whoever shot the video recorded time of day timecode synced from a GPS receiver that was close to the camera (in your case that looks like it would mean mounted in the helicopter), you can use the time code data to match your GPS metadata to the video. I use an automated process to incorporate the the metadata into the video, but the process is all done with custom software that the CEO of our company wrote. The other people I've seen incorporating GPS metadata into video are also using customized, proprietary processes. If you're adding the data in post, you will have to translate the data into Premiere titles or After Effects text keyframes or something else that you can overlay on the video.
You can also use hardware during your shoot to overlay the GPS data onto the video. I don't use any products that do this, and I don't know how easy they are to find for purchase, but there definitely are people in the geospatial sector who feed video through a GPS-aware piece of video processing hardware that overlays time and position data in real time. In this case you would feed video (most likely through HD-SDI) from your camera to the GPS overlay hardware and then to a recorder.
There certainly aren't any GPS features built into Premiere Pro. If you want to add titles manually, you'll have to match the time code with your GPS data and make a new title each time the GPS info is supposed to update. GPS data is usually some form of table or spreadsheet with time, coordinates, and other positional data, so you can find the correct time in the video and make a title that includes the corresponding coordinates for that time. If you're doing this for more than a few seconds of video, it will be an unreasonably long and tedious process, but it is possible.

N82 WLAN and GPS

Similar Messages

Maybe you are looking for