N85 crash! won't run maps, and ovi and themes

so,
i've got n85, had it for about 6 months, no problem, love this phone, 2 days ago after synching my phone to my laptop, my phone's theme changed, it was in pc suite mode, i didn't think much of it, then after disconnecting it, i realized all my  applications are gone, they're still on the memory card but don't show in the menu, ovi maps dont run at all, i click on it nothing happens, when i try to connect to ovi, it says "packet data connection not available" and doesn't connect, when i run gmaps or opera it says this "maximum number of connections in use. close an active connection first." **bleep**? i have had for 6 months no problems and now...doesn't connect to phone's browser either and i just don't know what to do
here is what i did:
1.soft reset
2.factory settings
3.hard reset
4.memory card reformat
nothing works....nokia support sucks

Using your install DVDs do an Archive and Install. This will install a new OS without deleting the old one or any of your pre exiting data.
In defense of the MacBook, I have had mine for a bit over 2 years and have had no trouble at all. If power supplys burning up was any issue to speak of there would be lawsuits galore as this is one area (safety) that will not be accepted by any company due to liability. Apple actually discontinued using LiIon batteries in one laptop model years ago because one single battery caught on fire, and this was in an Apple lab, not in a users computer.
That all of your friends and you have all had your power supplies catch on fire seems extremely unlikely.
It also seems unlikely that an Apple rep would tell you that crashing twice a day is normal. It is not.
As far as lost data due to a bad hard drive, every computer user should always have and use an external backup hard drive. It is foolish to assume that your hard drive will never fail. All hard drives, any brand computer, are going to fail unless their use is simply discontinued before they fail. Hard drives have a 100% failure rate. that is the nature of the beast. However, most people operate as though the drive cannot fail and anything on it will never be lost. This is just not reality.
Apple has replaced many cracked cases even if the warranty has expired. You should ask an Apple rep about this, however, don't ask the rep that told you it is normal for your MacBook to crash three times a day.
My case has never cracked or warped or bulged or anything else in two years time. I cannot help but wonder what it takes for this to happen.
(End of my venting)

Similar Messages

  • Muse crashed, won't run anymore: user id mismatch

    I was running muse, and it crashed. Now, when I try and start it.. it won't run at all.
    Pretty useless..

    Hello,
    please do the following steps and you will be all set.
    1. Sign out from Muse By going to Help > Sign out. (if you see the option to do that)
    2. Sign out from Creative Cloud Application. (Steps are mentioned in the link Sign out, Sign in | Creative Cloud Desktop app), then Quit Creative Cloud Application.
    3. Rename the "OOBE" folder to "OOBEold"
    MAC : (This folder can be found at Finder > Go > Go to Folder> Type ~/library/application support/Adobe > Hit return)
    Widows : ( This folder can be found at C:\Users\<username>\AppData\Local\Adobe )
    4. Relaunch Muse, Sign in with your Adobe ID.
    Please let me know if the steps above do not work or if you have any confusion.
    Regards
    Vivek

  • Microsoft Word Crashes - won't run at all

    I know I should post this on some Word:Mac forum but I trust the knowledgebase here more!
    Word 2004 on an Intel MacBook running 10.5.8 crashes every time.
    I've deleted all Word preference files, identities, etc....didn't fix it.
    I've validated all fonts and deleted all fonts with any errors....didn't fix it.
    I've uninstalled and reinstalled the software several times.....didn't fix it.
    I've run virus checking software and found files with Word viruses and cleaned them....didn't fix it.
    Help.

    On another thread, someone with the same problem believed it was a corrupt dictionary. I turned off spelling and grammar checking and it has stopped crashing, but this is not an ideal solution.
    The dictionary is tied to the user, because other users on the same computer aren't having the problem, but I don't know where Microsoft has hidden the dictionaries, or how to delete them.

  • Task sequences won't run after "Setup Windows and ConfigMgr"

    In my Task Sequence for SCCM 2012 R2, no task sequences that occur after the "Setup Windows and Configuration Manager" step will run if I add to the Installation properties:
    PATCH="\\server.domain.com\D$\SMSPKGSIG\PHX00033.2\configmgr2012ac-r2-kb2905002-x64.msp"
    I believe this hotfix is necessary because I had to install on the server to fix the speed of downloading the WIM file. And I believe it says I need to append this PATH= switch to the install. 
    Is my path used incorrectly or something? Because that is the actual path to the file. 
    My task sequences will run fine if I remove it and just leave the SMSMP=server.domain.com in the install properties. 

    Your path would then be :
    PATCH="C:\_SMSTaskSequence\OSD\JJJ00033.2\configmgr2012ac-r2-kb2905002-x64.msp"
    I suggest that you plan for further patches. Create a directory with all your future hotfix in it.
    Ex: D:\SCCMHotFixes\KBNumber\x64
    Your "Patch" parameter will grow over time, when a new hotfix will be release, you'll need
    to add it after this one and so on...
    I always use the _SMSTSDataPath without any problem, you could also try this.
    PATCH=""%_SMSTSMDataPath%\OSD\JJJ00033.2\configmgr2012ac-r2-kb2905002-x64.msp"
    Benoit Lecours | Blog: System Center Dudes

  • How do I uninstall Firefox 6.0 and go back to Firefox 5.x. I am a teacher and several secondary programs won't run with 6.0 and I do not want to upgrade them-too many downstream problems.

    The most recent update was apparently on 8/18/11 and 8/20. Message comes up to upgrade Java, Real Time Player, and two other programs. I have not been able to use Real Time Player for about a month and it used to work well in the old version of Firefox. By the way, everything works fine in Internet Explorer (which I really don't want to use).

    http://kb.mozillazine.org/Uninstalling_firefox
    this site helps me a lot......hope this can help

  • I got an error while updating itunes, it won't run apple mobile device and gives a runtime error, can anyone help ?

    I have Windows Vista Premium (64) installed on my pc, never had this kind of problem before. I mostly use this computer only for itunes...
    I tried to re-install itunes without success, now it gives a runtime error visual c++ runtime library , says to re-install itunes with error 7 (windows error 1114)
    Please help me! thanks !

    I had the same problem. Use the uninstall feature to delete all of the Apple related programs that came with the recent download. There should be 3. Check the dates they were installed to be sure.
    DO NOT DELETE any folders manually unless you want to lose playlists, etc.
    Reboot your computer then reinstall. It worked like a charm for me!

  • I installed iTunes on my Windows 7 PC and now Internet Explorer crashes and won't run.

    I installed iTunes on my Dell PC running Windows 7 and now Internet Explorer crashes and won't run. Are there any known conflicts, or likely issues that may be causing this?
    I've rebooted, and the iTunes program seems to operate fine. I used it to upgrade my iPad's OS to 8.1.3.

    They aren't related and shouldn't affect each other.

  • New version won't run and crashes, help please? [iOS]

    My adobe acrobat pdf reader updated itself to the new DC version and it will not run on my iPad running ios 8.3! When I select the icon for Adobe acrobat dc it runs the opening screen and then moves back to the iPad main screen. If I double press the main iPad button I can see acrobat is running but if I select it I am briefly shown the last open file and then it switches back to the main iPad screen.
    I desperately need some files which are stored on the device so can the programme be reset?

    Hi Chris,
    Could you force the Acrobat DC app to close and restart it?
    Force an app to close in iOS - Apple Support
    Does the Acrobat DC app launch successfully after that?
    The error message is displayed by the desktop version of Apple iTunes.  Unfortunately, I am not able to find out what exactly is causing the problem with nested folders in iTunes.
    Here's the old forum discussion that I found.
    Cant backup files that are in folders on my iPad
    Please see the last reply in the discussion.
    However, if you are unable to launch the Acrobat DC app successfully, you won't be able to change folder names or structure.
    Is there no way the app on the iPad can be reset without deleting it or is it possible to reinstall the previous software version which was stable?
    Please let us know if force-closing and restarting the app helps.  But if you uninstall any iOS app (not just Acrobat DC or Reader), iOS will erase all of the associated app data (including your PDF document).

  • Lightroom 5.5 and Photoshop CC 14 won't run after installing

    I tried installing the Lightroom and PS upgrades through the Creative Cloud installers - they install but won't run.  Lightroom won't start at all now and PS starts, gets to the main window and immediately shuts down.   I've restored, reinstalled, uninstalled all old versions, run CC cleaner multiple times sucessfully - nothing has worked.
    Help is appreciated.
    Thanks

    http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately-launch.html

  • Firefox 24 and 25 won't run on server identities?

    I downloaded the last update, 24, which worked fine on local identities. When I try to open it in a server/network identity, it never opens, just hangs - I tried opening in safe mode (opt key + open, choose safe mode) and it acts like it will open, but never loads, and I can't click any buttons on the toolbar (or I can click one, but nothing ever loads). Resetting doesn't work either. It does the same thing on all computers, only server identities.
    I've tried creating a new profile, deleting old profiles, changing places suffixes to ".old", deleting prefs file - nothing worked. Firefox never opens, so I can't do any of the support related to the toolbar.
    I think it's related to an add-on, because it first crashed when trying to find compatibility with add-ons. It won't run in safe mode, though, so I can't tell.
    My next step is going to be trying to find where all the add-ons are located, and delete them manually, but I'm not sure where to start.
    If anyone has any other advice, that would be great!

    Hi,
    Thanks, but it didn't work~~
    I tried to delete the extensions from the folder first, but when I tried to open firefox, it had the same problem.
    I actually removed both the Mozilla folder and the Firefox folder as a last resort, and it's still not working.
    The window pops up, with the "bookmarks and history system will not be functional... Some security software can cause this problem" error message. The "Learn More" button is not clickable.
    I've disabled all security software and even my firewall, and it's still happening. My extensions/addons are deleted.

  • Downloaded Logic Pro and won't run

    Downloaded Logic Pro and won't run. Keeps telling me couldn't open due to a problem. It says to update my software or reinstall it but it' won't let update it neither.

    Bought the software in app store, installed it and it just won't run. I have OS X 10.6.8 just donwgraded from lion and safri wouldn't work either since.
    The error window tells me maybe I should re install the program or update my software. I've done both, donwloaded the upgrade (Logic pro 9.1.7) and the install helper keeps telling I can't updrade my software like that. I need to chek for actualization through my computer. But the computer actualization finder "thingy" won't find more softaware to update.
    This are the details shown in the error report: (I don't understand any of it)
    Process:         Logic Pro [372]
    Path:            /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
    Identifier:      com.apple.logic.pro
    Version:         ??? (???)
    Build Info:      Logic-17005700~2
    App Item ID:     459578486
    App External ID: 6130764
    Code Type:       X86 (Native)
    Parent Process:  launchd [119]
    Date/Time:       2012-04-17 08:24:13.051 -0500
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          25851 sec
    Crashes Since Last Report:           2589
    Per-App Crashes Since Last Report:   6
    Anonymous UUID:                      EDA52A61-88BE-4D83-8D14-5CB718D2D6EB
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /System/Library/Frameworks/CoreMedia.framework/Versions/A/CoreMedia
      Referenced from: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4163b  dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
    Please help!! and thanks

  • Why did you quit supporting Mac OSX 10.4 ? I downloaded you update and it won't run.

    I accepted your last online upgrade request and it worked for basic browsing, but the Comcast mail page stopped working correctly (the buttons: Save as Draft, Delete, Add attachment, etc. are inactive).
    Thinking it was corrupted, I deleted the current version on my machine and installed the latest download and it tells me it won't run on this version of Mac OS.

    Firefox 3.6.23 is still supported secure and will work with OSX 10.4
    * see [[installing a previous version of firefox]]
    * download from http://www.mozilla.org/firefox/all-older.html
    Note do NOT use any options that say delete user settings, you will loose all profile information for all normally installed versions of firefox, so that is pass words and bookmarks etc disappear.
    You mention Comcast
    Note IDvault sometimes provided by Comcast has been associated with Firefox crashes (bug 684748) consider
    * ensuring you have the latest version of that software if you use it <br/> (the problem may be solved in the latest versions)
    * disabling or uninstalling the software if it is a problem

  • Flashplayer installed and active but won't run

    Hi. I seem to be having the same problem as several others on here: I've got the latest version of Flash  installed and active on my Win8.1 system, and it shows as an active add-on in the latest version of Firefox, but it stalls on loading and won't run. This started immediately after the latest Flash update was released: I've tried uninstalling and re-installing.
    Thanks.

    You're more than welcome to file performance bugs at http://bugbase.adobe.com/.  I noticed that the page on adobe.com took a really long time to load for me as well on Chrome, but Adobe.com is super complex, and I think that has something to do with a poorly performing back-end service.  Since you're seeing the slow script dialog not loading on the watch page, it's pretty clear that Flash Player is installed and playing content under normal circumstances.  The interesting part is that one of those dialogs is talking about JavaScript running on the page, and the other is talking about Flash.  It's unclear without debugging the issue whether it's the browser or the plugin; however, as you've noticed, both work fine in Internet Explorer.
    It's important to point out that both Adobe and Microsoft made a tremendous effort in tuning the  Internet Explorer experience for Windows 8 and higher.  The latest versions of IE offer a fast, modern plug-in architecture that efficiently offers defense-in-depth protection against the modern generation of security threats (as opposed to the sandboxing approach that we retrofit to Firefox).  Similarly, Google Chrome provides a modern, secure plug-in architecture and invests heavily in making the Flash experience in the browser great.  I'm a Firefox fan as well, but the reality is that you might be more satisfied with your experience when using a different browser.
    For the crash, I'd be happy to take a look at the crash analysis to see if I can find anything useful.
    In Firefox, if you type about:crashes in the address bar, you should get a list of recent crashes.
    Click each link to submit it to the Mozilla crash reporting system.
    Copy the address from the resulting window into a reply here.

  • E51 and Maps with Ovi

    Hello everyone,
    I have installed the Nokia OVI application my laptop running windows 7 and connected to my Nokia E51 using a USB cable.
    I noticed that I could install OVI maps with an update.
    I let the OVI application handle the download and started the installation, on my E51 I told the installer to continue, I accepted the certificates and I saw a screen with a bar which said "installing".
    After this I can't find any thing like nokia maps in my instalations folder.
    In my OVI application I can't install any maps.
    The same happened when I used the nokia website to find a version of Ovi maps for my E51: 
    http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download#/default/
    Is there a way to fix this?
    Yours sincerely,
    Frank

    You cant install maps until you have ran the maps application once.
    Please check under the applications file. Also, where is the old maps application which was bundled with the device? That would be what you will open since the new maps app just replaces the old installation.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Action steps that won't run correctly in PSE 7/8/9 (but did in 4 and 6)

    I have a wonderful action that was written to work in PSE 3/4/6.  It won't run in PSE 7/8/9.  After fooling around for a while, I think I understand why.  Adobe changed the way Adjustment Layers are handled.  In earlier versions of Photoshop and Elements, Adjustment Layers threw up a modal dialog box.  That changed so that Adjustment Layers now appear in the Palette Bin as a palette.
    Here a sample of some of the action steps that won't work correctly:
    Make adjustment layer
    Using: adjustment layer
    Type: levels
    Set Selection
    To: none
    Set current layer
    To: layer
    Name:  “Adjustment 1”
    Set current layer
    To: layer
    Mode: luminosity
    Stop
    Message:  “Move gray slider left”
    With Continue
    Set current adjustment layer
    To: levels
    In earlier versions of PS and PSE, the way these steps would work is that a new adjustment layer would be created, the dialog box giving the instruction would open, it would be dismissed by clicking "Continue," and then the "Set current adjustment layer to: Levels" would generate a model adjustment layer dialog box would open up which would let one make the adjustment.
    In newer versions, since Adjustment Layers are handled in the Palette Bin, after dismissing the instructions, the action doesn't stop to allow the user to make change the sliders on the adjustment layer.
    The action runs perfectly in CS4 and CS5 and throws up the levels adjustment modal box as it did in PSE 4 and PSE 6, but the action doesn't throw the modal box in PSE 7/8/9
    Does anyone know of a way to alter the action steps to allow the action to stop to allow the adjustment and then to resume again?

    Adding a new levels adjustment layer on top of the Midtone contrast layer
    should work, just use a clipping mask to restrict the adjustments to the
    areas of the levels adjustment layer below. The histogram will be different, but
    actually testing the action is really the only way to know if that makes any difference.
    Replacing the levels adjustment layer is another option, though it requires a few more steps.
    The following assumes when the action gets to this point,
    the Midtone contrast adjustment layer is the active (selected) layer.
    To record this part of the action:
    1. Duplicate current channel (in the channels panel. drag the Midtone contrast mask
        down to the Create new channel icon at the bottom of the channels panel)
    2. Ctrl+click on the newly created channel (Midtone contrast mask copy)
        This loads the selection of that channel.
    3. Drag the new channel (midtone contrast mask copy) to the trash icon at the bottom
       of the channels panel.
    4. Back in the layers panel, delete the Midtone Contrast adjustment layer.
    5. Go to Layer>New Adjustment Layer>Levels
        This creates a new levels adjustment layer using the selection loaded from
        the duplicated channel and opens the levels dialog.
    To load the RGB (composite) as a selection, Ctrl+click on the rgb in the channels panel
    and the same is true for the red, green and blue channels.
    With layer masks, elements doesn't seem to want to load them as selections in actions,
    so that's the reason for the action steps above.
    MTSTUNER

Maybe you are looking for