N85 Latest Firmware v30???

I have checked via NSU.. no availabilty
checked via FOTA... available v30
I am from India, i wanna Flash up my phone using NSU once. it's a **bleep** phone with heck of problems and i wanna clear out everything once. can anyone tell me how do i get v30 over NSU?? Nokia bangs the users while offering the price and no responsibilty at all on Nokia Care Centers. Darn, they don't even know what i know about s60 phones. Nokia offer me a job n Nokia Care Center. instead of 50 fools, one intelligent is much better....

You have to wait till Nokia upload latest firmware for your mobile in their NSU program. Once they upload, you can easily upgrade your N85's firmware using NSU. Remember that, after upgrading firmware, format your memory card and hard format your mobile to get best performance without any error. Good luck...

Similar Messages

  • N95 latest firmware

    What is the latest FW for the N95?
    Im running V13 and the software updater is saying the latest available is 20.0.015
    The phone was originally on 3 network
    Nokia N95-1
    v30.0.015

    18-May-2008 12:45 AM
    vijaygunners wrote:
    What is the latest FW for the N95?
    Im running V13 and the software updater is saying the latest available is 20.0.015
    The phone was originally on 3 network
    The latest firmware for an unbranded N95-1 is v21.0.016. However, it you got your phone from 3 then the chances are that it has firmware that's been branded by 3. In this case, it's 3 who decides when new firmware is relleased, but it is still made available to you through Nokia's Software Updater software.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • N85 NEW FIRMWARE FINALLY Version 20.175

    That's right, the n85 has finally got a long awaited update to version 20.175. Currently installing so will let you know how it is once i've finished.

    "Hi, Thanks for your reply. Do Orange normally take some time to de-brand their phones? i know that Orange took a fair while with my old SE K850... Would you say it's worth re-branding it?"
    I don't know how long Orange normally take to sort their new software out. I used to have a k850 too and i had about 3 updates in the 18months i were using the K850. It can vary how long it takes them to sort out new firmware though.
    As for debranding - this will allow you to get the latest updates straight away but it will mean you lose your warranty. If you debrand your phone, you will not be covered if it breaks and you will have to pay to get it fixed. Debranding can't be talked about on this forum, sorry. 
    "Also do you know if they sorted out the bluetooth handsfree phonebook issues... I thought maybe you're the man to answer that with your ID..."
    I use my phone with a bluetooth handsfree car kit - a Parrot CK3100 and i used to always have problems with the phone not connecting to the handsfree properly when i tried making a call. Since i did the update on my N85, the phone works much better with bluetooth handsfree and i never have a problem with sending the phonebook via bluetooth.
    If you want to check what the latest firmware version for your phone is, go to this site and type in your product code AT THE BOTTOM OF THE PAGE. Your product code is a number found on your phone under the battery. http://www.nokia.co.uk/get-support-and-software/download-software/device-software-update/can-i-updat...
    Hope this answers your questions. PLEASE GIVE KUDOS IF IT DOES (the big yellow button on the right)
    Message Edited by car_guy143 on 16-May-2009 07:48 PM

  • N85 new firmware ?

    When will someone know a new firm

    "Hi, Thanks for your reply. Do Orange normally take some time to de-brand their phones? i know that Orange took a fair while with my old SE K850... Would you say it's worth re-branding it?"
    I don't know how long Orange normally take to sort their new software out. I used to have a k850 too and i had about 3 updates in the 18months i were using the K850. It can vary how long it takes them to sort out new firmware though.
    As for debranding - this will allow you to get the latest updates straight away but it will mean you lose your warranty. If you debrand your phone, you will not be covered if it breaks and you will have to pay to get it fixed. Debranding can't be talked about on this forum, sorry. 
    "Also do you know if they sorted out the bluetooth handsfree phonebook issues... I thought maybe you're the man to answer that with your ID..."
    I use my phone with a bluetooth handsfree car kit - a Parrot CK3100 and i used to always have problems with the phone not connecting to the handsfree properly when i tried making a call. Since i did the update on my N85, the phone works much better with bluetooth handsfree and i never have a problem with sending the phonebook via bluetooth.
    If you want to check what the latest firmware version for your phone is, go to this site and type in your product code AT THE BOTTOM OF THE PAGE. Your product code is a number found on your phone under the battery. http://www.nokia.co.uk/get-support-and-software/download-software/device-software-update/can-i-updat...
    Hope this answers your questions. PLEASE GIVE KUDOS IF IT DOES (the big yellow button on the right)
    Message Edited by car_guy143 on 16-May-2009 07:48 PM

  • My macbook pro screen remains grey after latest firmware update

    i just had the update notification for the latest firmware, proceeded to do so, and the screen remains grey, its been more than one hour and still grey, since its a firmware update i don't want to disturb it, but could it be that is taking so long?

    Reboot it by pressing the power button down hard to force a shutdown.
    If your still having problems, take it to Apple. I hope you have AppleCare becuase if they can't fix it, it's a new logicboard.

  • HT3728 Does factory reset go back to latest firmware update.

    I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
    Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
    I have since then tried to do factory reset several times without getting the device up and running again.
    When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
    I have not been able to discover the express from my iPad, iPone or iMac again.
    Could the reaons be latest firmware update?
    Any advice to get it back to normal?
    Thanks,
    Per

    Does factory reset go back to the latest firmware update.
    A Factory Default Reset will not affect the installed firmware.
    Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
    A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
    I have since then tried to do factory reset several times without getting the device up and running again.
    The AirPort Express has failed, and will need to be replaced.
    When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
    This is yet another confirmation that the Express has failed, and will need to be replaced.

  • Internet stopped working on MBA after latest firmware update. Help please!!!

    Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
    Any ideas?

    FIXED.
    I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now).

  • Attempted Iphone 4 update to latest firmware update "failed"

    Ive attempted to update the Iphone to the latest firmware update  and it has failed 3 times, the final time it looked as though
    it worked but stopped and went into new mode to go-back to Restore to old  setting. Now it is locked up and asking me for the  admin backup password
    and everything I've tried is not working..  Not sure what to do at this point.
    The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
    I'm  open to any ideas at this point.
                Thanks Artman

    Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
    Open a Command window and type the command "netsh   winsock   reset"
    Reboot your computer
    Disable your antivirus and firewall
    Launch iTunes
    Connect the phone using a USB port directly on the computer, not a hub
    When the phone is recognized in iTunes click on it, then click Restore
    If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
    If the update completes you are in business
    You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

  • Zen Touch latest Firmware Update...player not connec

    I tried installing the latest Firmware update for my Zen Touch (released 2-09).
    The player is connected and recognized by Windows and the Media Explorer. However, when I try to install the new Firmware it keeps saying "player not connected".
    I tried d/l two different language packages cause I wasn't sure what counted - player language or operating system langauge. Anyway, that didn't make a difference.
    So what do I do? I have no idea where to start. It's firmware for the correct device connected through Windows XP.
    I have made a firmware update before, which worked fine. After that I updated the media explorer software.
    Help is very much appreciated! Thank you in advance.
    -tina-Message Edited by tinas on 2-0-2005 08:56 PMMessage Edited by tinas on 2-0-2005 09:00 PM

    Perhaps it's worth making sure no software is using the player, so reboot the PC, and turn off the Creative Detector. Then try again.
    Are you trying to upgrade to the .0.03 version?

  • TC issues after latest firmware update

    Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

    Need some more info.
    What is the modem.. make and model?
    Is it both modem and router or just a modem?
    What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
    The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
    But it does seem hard to get rid of properly.
    I want you to do a factory reset not just a hard reset.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
    eg TCgenx (use actual gen if you want) for base station name.
    TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
    Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
    Tell us what OS the computers are running and I can tell you how to install the old airport utility.
    Test the TC in bridge to your other router is also a good alternative.

  • Latest firmware update and startup problems

    Hi I have been reading all about this so-called firmware and its importance in keeping updated on my new macbook pro. Therefore I have been diligently trying to keep it updated over my dial-up connection. I installed the latest firmware as my automatic update suggested. Now I get the spinning startup circle of death. Tried booting in safe mode to no avail. Help? (I also have version cue installed.)

    Hi jbell,
    Firmware updates are not availible in Software Update, only sofware updates are. Did you Repair Permissions prior to and after updating software? You always should. Go to Applications-Utilities-Disk Utility, and highlight Mac OS X in the left hand column, then Repair Permissions below. Firmware updates are available here....
    http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate101.html
    http://www.apple.com/support/downloads/macbookpro15inchsmcfirmwareupdate.html

  • Mid 2006 iMac Boot Problem (Since latest firmware update)

    I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
    Any help would be appreciated.
    Thanks!

    Actually, I think it'san early 2006.

  • Zen XTRA is completely dead after installing the latest firmware 2.10

    Hello,?I have tried to install the latest firmware 2.0.03 to my Zen Xtra 60GB mp3 player. The installation process completed about 70%. As I understand, at that point the?new firmware was finally uploaded after a couple of player reboots. The?firmware installer was waiting with a message "Waiting for the player to reboot", and the player rebooted. But the firmware installer was waiting, and waiting... and after an hour I looked at the player and saw that it was not starting up at all. I removed the USB cable, stopped the firmware upgrade process and tried to reboot the player with reset; then I tried to access the recovery menu as described in the FAQ?- but no success. The player shows completely no response to any button presses, the LCD does not even flicker, the hard dri've does not power up - I don't hear it. Nothing happens, even if pressing the play/reset switch for fi've minutes. What's could be the matter? And more importantly, how can I get it working back again? I fear that the warranty has expired by now. Can anyone suggest what to do?I would be grateful for any ideas.

    It is puzzling how some people including myself can upgrade thier firmware on thier devices and experience no problems at all during the procedure. Then theres others like yourself who would experience catastrophic events.
    Since we all downloaded the firmware from the same place, and?alot of us didn't have any problems, it is?at least safe to say that there isn't anything?wrong?with the new firmware. Or else we'd all problems.
    So for these devices that are failing, there must have been already a serious problem with them before the upgrade even started. The symptons just went unnoticed through every day normal use. And are only manifested through a reload/upgrade of firmware. Or something happened on the computer itself, during the transfer of data; auto file scanning virus protection comes to mind, or other programs or services running in the background that were taking up resources needed to make the upgrade go smoothly,?a USB cable with a short in it or a bad USB port. Who knows?!
    If the player doesn't even start?up in?rescue mode then theres really nothing as a consumer you can do to fix it. You'd have to just see about getting it repaired, or replace it. I know yours is a 60GB, but?I gotta tell you the new 30GB Zen Vision M is a sweet deal!

  • After latest firmware update, AppleTV2 no longer sends signal

    So I updated my AppleTV2 with the latest firmware, and now it no longer sends a signal out.
    Has Apple stated when they're going to fix this?

    MicroUSB cable doesn't fit in AppleTV2. Try again.
    Edit: Apparently the MicroUSB cable I was trying to use wasn't 'micro' enough.
    I'm now trying again with a MicroUSB cable used to recharge my Xbox 360 wireless headset. Heh... the irony is amusing.

  • Can't send mail after latest firmware update

    My outgoing mail won't go out after the latest firmware update. I have 4 different accounts and none are working. Tried in various locations. Any ideas would be appreciated. Thanks

    Was this for 10.5.8???
    Others have reported it for 10.6.8 & up...
    http://x704.net/bbs/viewtopic.php?f=12&t=6118

Maybe you are looking for