N85: System error with Maps

Hello
I have a N85 for a few days now. Everything is working except the Maps: when I try to launch the Maps application I have an error message "System Error" ("Erreur système" in french).
Does anybody know how to fix this problem ?
Thanks

Hello
Thanks for your answer. In fact when I have a look to the installed apps, Nokia Maps is not in the list of installed applications (which is probably the cause of the error). I have already noticed this and I have tried to install Nokia Maps but the result is the same: Nokia Maps not in the list of installed apps and "System error" when I try to use the maps. The Nokia support has sent me some steps to perform (among them reinitialize the phone to its primary state or even format it) to fix the problem. I will try this.
I'll let you know if it is has worked
Thanks
Regards

Similar Messages

" SYSTEM ERROR" with ERROR CATEGORY: Message and ERROR ID : GENERAL

HI all
I m doing JDBC -> XI -> SOAP -> XI -> FILE ( XML) scenario .I have implemented it using BPM .
But ,In MONI , i am getting a "SYSTEM ERROR " with "ERROR CATEGORY : MESSAGE" and "ERROR ID : GENERAL" .and
One thing more is there my all adapters are active (JDBC,FILE) in runtime workbench but SOAP adapters i am not able to see it there as its services are not defined in there .Is this problem is because SOAP adapters are not defined in runtime workbench ?

Hi Colin
I are using SP 3.0
I have checked the Communication channel monitoring and Adapter monitering also but in mine case when i want to see the SOAP adapter in adapter monitoring , the SOAP ICON is disabled there ,so i am not able to see whats the status of my SOAP adapter i have used in my scenario
Thanks and Regards
Abhishek

N97 Nokia maps "System error" / google maps won't ...

Since my N97 was unboxed Nokia maps has refused to load, it just beeps and says "System error". That's it! Any clues on how to get this working? It's pretty annoying as it's one feature I was looking forward to using.
Funnily enough I installed google maps and that won't open either, but there's no error message, it just makes the screen blink once then back to the menu.
Any advice appreciated
Solved!
Go to Solution.

One more big NEGATIVE point for Nokia....
You needed to restore the default factory settings for solve the system erros in the Nokia Maps???!
(I have the same problem...) Tsc Tsc....
Nokia WAKE UP for several problems with the N97 model!!!
Work hard for a calendar and system betters, more quickly to backup in desktop computer, include.
Learn something important features with the Palm calendar smartphone, repetitive meets and memos in days or weeks, for example.
(I have a Palm Treo smartphone also. The Nokia n97, calendar, system, etc. is lefting with missing of my old phone....)

"Internal System Error" with Envy 114 (110 series)

I have tried repeatedly to set up web services with this printer, and I continue to get the "internal system error message. It's maddening! I have a mac system 10.7.4. I have the printer set up to work wirelessly, but when I try to deal with web services feature, I fail every time--with this particular message.
Has anyone had this problem?

Are you receiving this error on the front screen of the printer after pressing the web services icon (piece of paper with rings behind it) or are you receiving this through the EWS (embedded web server) of the printer?
The EWS would be accessed using the printer's IP address and a web browser on a computer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

N85--system error when i open n-gage!

wat shud i do now? just a day back i got n85 and it says system error when i open the n-gage application.. so i deleted it!!
now what??
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

the problem still persists... can anyone has the relevant experience to help in this matter.. i emailed nokia, their solution did not work too...
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

System error with 64MB MMC for 6680

I have had my phone for six months and all of a sudden the MMC has packed in. It works in my wifes phone but when it goes in mine it reads system error and i cant access any saved files. I've only used 18MB so it cant be full. could it be a prob with my phone?
Any help appreciated
Richard

Tools -> Memory -> Options -> Format Mem. card.
If you are getting a system error you may have to format the mmc in your wife's phone, but I would try it in yours first.
dmz

Error with "Mapping Program not Found"

We exported all of our XI development from DEV and imported it to Prod. We have not changed anything at all. Now, even though I have authority I can't go into EDIT mode in Prod.
The main problem is that even though everything imported into Prod without error, when we run our program we are getting the following error:
<b>="MAPPING">NO_MAPPINGPROGRAM_FOUND </b>
What could have changed and were do I start to look?
Thanks in advance, will reward points.
Mike Curtis

Micheal,
You dont need to externally import XSD's and WSDL's. If you import the whole software component or the whole namespace then they will come automatically.
Check in message mappings whether you can see the mappings or not? I think you might have exported object by object not the whole SWCV. If it is yes then you also import the message mapping. Also check in your change list whether there are any objects. If yes please activate them.
By the way you dont see only the one message mapping you are tyring to check or all of them? Dont edit anything in production. Its not good. So dont enable the edit button as other threads reply.
---Satish

E71 system error with meeting entry

Hello everyone, I just bought my E71 and I have the following problem: when I try to add a meeting, after i do "done" it gives me:system error.
when I try to insert a "to do" or memo, it works fine but when I write a meeting I have this error.
I tried to add a meeting on outlook and then I syncronized, after this I have a "to do" or task on my phone and not a meeting.
The sync works fine.
Thanks a lot for your support.

pippobaudo:
Thanks for the info. After many redundant backups and original setting realoadings I managed by trial and error to work out that the error is caused by the backup utility whenever you backup calender or todo notes.
So I fixed it by making a full backup of my phone, but excluding calender and todo notes. Then I reset to original settings, and loaded the backup. Works fine now.
Its a bit of a hack that the backup utility cannot restore calender entries correctly...

N97 system error with photos

When I go to photos on my new N97 it shows the icon of one picture I took earlier in the week (the others have all been transferred off onto my PC). However when I click on the captured area to open it, I get the broken image icon and a General: system error when I try to delete it. The picture isn't visible on the file explorer on the phone or when connected to my PC. How do I remove the image completely?
If it necessitates a hard reset etc (nokias answer to control-alt-delete it seems but which takes 100 times longer) does this hard reset also wipe the mass storage memory or is it just the phone settings? Is there any way to protect the mass storage memory during a hard reset as having to back up several Gb of data and then restore it just to delete an icon seems completely OTT. Surely there is a database file somewhere that can be deleted/recreated?
thanks
Craig

Hmm, not heard of that before. My N97 refers to captured "items" as opposed to "image or video", your phone seems to think there's a media file somewhere anyway. Try rebooting phone. Also if you rename the Private folder to "Private_old" or something, this will wipe all databases. Reboot, then open Photos and phone will look for pics (and hopefully not find the one you mention). Video and music databases will also rebuild when you access them. I've not had to do this procedure myself, but I've seen it work for others, up to you.
I can appreciate it's irritating trying to get rid of such a thing without having to format any drives, if problem persists hopefully someone else can offer a simple workaround. Otherwise you'll need to back up and format I reckon. Sorry, all I can think of right now, mate.

Windows operating system error with a Zen Sleek and windows 2

I have tried to install the creative disk that came with the Zen Sleek. After launch I get this message "windows operating system running on this computer is not supported by this product and can get no further. I am running windows 2000 pro. I have downloaded the creative media source program from the creative.com site and it will install beautifully but when you launch it, I get the error " CTCMS.exe has generated errors and will be closed by windows. You will need to restart program." I figure that these two problems are probably related. We have been able to transfer songs by using the play for sure, but I am disappointed otherwise.
thanks, Kathy

On the packaging it should say the player is Win XP only. I'm not sure if the Sleek ships with the Easy CD that allows MTP/PlayForSure based players to work with earlier Windows versions.

File to IDOC scenario : Error with mapping due to Context handling

Hi Experts.
I have a file to IDOC scenario which need your advice.
Source File structure as follows:
Control_Header     <1:1>
Invoice_Header     <1:unbounded)
Invoice_Line          <1:unbounded)
Trailer                    <1:1>
Payload as follows capture from SXMB_MONI
- <Control_Header>
        <Key>999</Key>
        <TransactionID>RCTV</TransactionID>
</Control_Header>
- <Invoice_Header>
    <Key>000</Key>
    <BusinessUnit>HDB05</BusinessUnit>
    <InvoiceNo>64471</InvoiceNo>
</Invoice_Header>
- <Invoice_Line>
      <Key>001</Key>
      <UnitPrice>7.00000</UnitPrice>
      <Quantity>1.0000</Quantity>
      <GSTAmount>0.49</GSTAmount>
      <GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Invoice_Line>
      <Key>001</Key>
      <UnitPrice>8.00000</UnitPrice>
      <Quantity>1.0000</Quantity>
      <GSTAmount>0.56</GSTAmount>
      <GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Invoice_Header>
      <Key>000</Key>
     <BusinessUnit>HDB21</BusinessUnit>
     <InvoiceNo>6Y0575</InvoiceNo>
</Invoice_Header>
- <Invoice_Line>
    <Key>001</Key>
    <UnitPrice>49.50000</UnitPrice>
    <Quantity>1.0000</Quantity>
    <GSTAmount>3.47</GSTAmount>
    <GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Trailer>
     <Key>TRL</Key>
     <TransactionID>RCTV</TransactionID>
     <TotalFeedLine>96</TotalFeedLine>
     <HashTotalValue>212.00</HashTotalValue>
</Trailer>
</ns:MT_EINVOICE>
Mapping as follow:
                                               IDOC
<Control_Header>   ->    <Control_Header>
<Invoice_Header>   --> <Header_Invoice>
<Invoice_Line>      --->        removeContext --> <Line_Invoice>       this is the child node of <Header_Invoice>
<Trailer>               -
>    <Trailer>
The result of the using the above Payload get the following result which not wht I seek
<Control_Header>
<Header_Invoice>
      <Line_Invoice>
      <Line_Invoice>
     <Line_Invoice>   *** This belong to the Invoice_Line of the second <Header_Invoice> at the payload
<Header_Invoice>
     <Line_Invoice>   *** THis segment is empty
<Trailer>
I required the Line_Invoice to belong to the child of the second <Header_Invoice>, I have tried using
removecontext with splitVaue and collaspeContext but to no avail.
May I know what is my mistake on the mapping of the Invoice_Line to Line_Invoice>
Rgds
FNG

Hello,
There should be something that could correlate the Invoice_Header/Key and Invoice_Line/Key. In your example, both are the same for the first and data set. If the sample looks like the one below, it is possible to sort things by correlating the Invoice_Header key and Invoice_Line key
<Invoice_Header>
<Key>000<Key>
</Invoice_Header>
<Invoice_Line>
<Key>000<Key>
</Invoice_Line>
<Invoice_Line>
<Key>000<Key>
</Invoice_Line>
<Invoice_Header>
<Key>001<Key>
</Invoice_Header>
<Invoice_Line>
<Key>001<Key>
</Invoice_Line>
An example mapping could look like this
For Header
Invoice_Header --> Header_Invoice
For Line
/InvoiceLine/Key --> removeContext --> splitByValue:valueChanged --> Invoice_Line
The subfields of the invoice line would also follow a similar logic, you just need to use formatByExample --> splitByValue:eachValue so that the context levels are the same.
Hope this helps,
Mark

OAM Access System Error with AD

Hi,
I am trying to install OAM 10.1.4.3 with user and policy store as AD 2008.
I have patched all components to BP05 to be compatible with AD 2008.
After succesfully installing Policy Manager when I access /access/oblix and provide user directory type as Active Directory, the console hangs.
That is on clicking "Next" botton it does not go to next page.
However if I select any other directory console works properly. Infact on proceeding with other DS on policy store type also if I select AD same thing happens.
Can anyone please suggest why its not taking AD as directory type.
Regards,
Deepika

Hi,
I have done schema changes, reloaded schema and renamed setup.xml still the same.
For safer side I have also changed below entry:
<NameValPair
ParamName="dynamicAuxiliaryForOblixDS"
Value="true"></NameValPair>
to false in identity setup.xml and restarted everything. Nothing changed.
In oblog.log of access server there is repetative below error:
unction^LDAPConfigDB::ReadOblixDBConfig
2013/07/25@11:18:17.192365 24806 24825 CONFIGDB WARNING 0x00000504 /usr/abuild/Oblix/10143hf/palantir/dblib/src/ldap_config_db.cpp:369 "Exception during DB runtime code" function^LDAPConfigDB::ReadOblixConfigDB obstatus^0
2013/07/25@11:18:17.192656 24806 24825 CONFIGDB WARNING 0x00000504 /usr/abuild/Oblix/10143hf/palantir/dblib/src/ldap_config_db.cpp:217 "Exception during DB runtime code" function^LDAPConfigDB::Open obstatus^0
Please suggest.
Regards,
Deepika

Error with Mapping Lookup API using JDBC

All,
I have an interface that uses a JDBC lookup user defined function. Occassionally we get the following message:
<i>Problem when calling an adapter by using communication channel myJDBCLookup (Party: , Service: myJDBCdbase, Object ID: 0cdb888150ee36638cbfb100ff2e7161) XI AF API call failed. Module exception: 'Error ACK handling failed: java.lang.NullPointerException'. Cause Exception: (No information available)</i>
The only way I can duplicate this error is if I deactivate the myJDBCLookup communication channel and re-run the interface. In this case I get the same exact error. I know the commchannels were active when I ran and got the errors. Typically what I do is just restart the erred message and it runs fine.
I'm thinking I may be running into a timeout problem on the Oracle end of my call and XI is "timing out" or something like that.
My questions are:
1) whether or not XI has some timeout setting that I could increase that would hopefully mitigate this issue (I'm not an XI admin)?
2) would using a different Conflict Resolution (JDBC adapter config) or Number of Retries of Database Transaction on SQL error (JDBC Advanced adapter config) setting help?
3) Is there something altogether different I should be looking at?

Hi,
This blog may help u on to optimize the lookup-
/people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
/people/sap.user72/blog/2005/10/15/jdbc-adapter-execution-mode-chained-or-unchained
ALso check the Adapter Engine about time out parameters-
hope this helps,
Regards,
moorthy

Systemic error with times and dates across all. please help

So, having recently made the switch to the world of Apple, I am starting to get my teeth into things - however, struggeling on a couple of fronts. The first and most frustrating for me at the moment is the fact that the time on my messaging and calanders would all appear to be the same.
When I send and receive messages on skype - they all apear with the same time on them.
When I open my ical (tried to sync calendars with my ipad2 myself - and initially felt very please with myself) only to find that ALL events had sat as the time...throughout the entire day, and within the event box, the time (the same time as that which appears in skype) appears inside and at the begining of every entry.
I have tried to change the date and time settings - the clock at the top right of my screen is correct and changes as the hours go by......but still no change in the skpye messaging or in ical.....so frustrating - I use skype as a business tool and at present I am not able to copy and paste peoples messages into anythign else as the time is incorrect.
Please help

http://forums.macrumors.com/showthread.php?t=1373272
https://discussions.apple.com/thread/3434340?start=0&tstart=0

Modifying the System Error file in portal

hi experts,
i have DMS to Km Connector BP Deployed.its working fine
when there is no user mapping for the dms system it throws System Error: with screen
System Error :
An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
Exception Class: <input field>
Exception Message: <input field>
Details -->this is button
My Requirement:
i want to change this standard error screen text with custom message
how can i achive this.
if i need to change any par/.sca file
where exactly i can find this file
what is the screen needs to be changed
Pls let me now the Location of System Error File Location
regards,
vani

Hi,
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/ee4f58ff1bce41b4dc6d2612fae211/frameset.htm
and More here..
Problem with system.log
Regards,
N.

N85: System error with Maps

Similar Messages

Maybe you are looking for