N85 Update to V30

I'm trying to use NSU to update my n85 to V30 but it doesn't seem to be working correctly.  During the last 20 seconds of the update, the progress bar stops. Then my phone restarts. Then NSU sits there for a while like it's not done updating (but why restart the phone if it's not done?)
After the phone restarts it looks like it's done and seems fine but the progress bar on NSU is still going. After a while it quits and says "Device recovery.. lost connection with your device... please replug device and click OK" I replugged and clicked OK. The phone goes into "updating mode" again (buttons are lit up and screen is deactivated). Then NSU says "update complete". Wrong. My phone goes into infinite restart mode and can't boot up all the way (shows NOKIA logo, then white screen, then turns off). I hard reset with the "octopus reset code" (hold star, 3, green call button and power button).
Then I tried reinstalling update a few times. Then I tried updating from XP instead of Vista. Then I tried removing the SD card. NSU still stops during last 20 seconds.
My phone claims to have V30 so what the heck. I reinstall update again. When it says "please replug your device" I decided to cancel the update at that point. The phone boots up fine after the 20 second NSU freeze but I'm afraid it may get damaged because it isn't completely updated.
It seems to be working fine so far but I want to get it to successfully update.

Try this.. Uninstall Nokia PC Suite and NSU from your PC and restart it. Now search for "Nokia" and even in hidden folders and delete everything. Now download latest version of Nokia PC Suite and NSU and install it in your PC and restart it again. Now turn off firewall and antivirus software and connect your mobile with PC. Now backup all the data of your mobile using Nokia PC Suite backup utility (for safety, if any problem persist). Now restart your mobile and connect it with your PC using original data cable. Now run NSU and do the procedure as written in NSU. Don't run any application in your PC or mobile. Don't touch your mobile untill "successful update" message appear in NSU. Tell me, it works or not.
If you like my post then give me "Kudos" star...

Similar Messages

  • N85 update to v30 bugs

    hey all, just updated my n85 to software update 30.019.53.1 and i gotta say its a step backwards. i can no longer refresh my library to pick up new music, it wont connect to the net to download pod casts, but the same connection will browse the net ok. It just seems to be a really flaky update. anyone else having the same problems? does anyone know if Nokia are even aware of the bugs in the release? theres alot of articles when you google "n85 library refresh not working" so it seems like a reasonably common occurance.
    cheers
    tony

    I agree that it's a step backwards.  Slow to connect to home wi-fi (or won't connect - "no gateway reply" )   Won't connect to several InternetRadio stations any more (eg all the GotRadio stations).  Overall slower to do anything.
    The update said it failed with 1% remaining...appeared unable to re-awaken the phone.  Told me to remove battery and USB cable, then cycled again and failed again, but the phone shows the new version
    Message Edited by rowanmountain on 18-Aug-2009 09:06 PM
    Message Edited by rowanmountain on 18-Aug-2009 09:06 PM

  • N95 will not restore backup after update to v30

    have read numerous forums about similar problems however nothing about upgrade to v30 and nothing that would solve my problem...
    Please help!
    So... Ive updated the telephone from v20 to v30... tried to restore my backup and nothing. It shows as if it was restored but there is nothing on the phone...
    Ive tried everything there was to try as far as I know or could have read...
    ... tried *#7370#
    ... tried nseries pc suite
    ... tried to restore content one by one
    Absolutely nothing works!
    There are all my job contacts in my contacts and messages and all my appointments in my calendar and since the computer Im using is new I have nothing on my Outlook yet...
    PLEASE HELP! I´m loosing my mind right now!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • N85 update problem

    I've update my N85 hours ago and now i can't hardreset my phone what can i do?

    Why do you want to do a hard reset?
    If this post was helpful, thank me by clicking the Kudos! star.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • N85 Latest Firmware v30???

    I have checked via NSU.. no availabilty
    checked via FOTA... available v30
    I am from India, i wanna Flash up my phone using NSU once. it's a **bleep** phone with heck of problems and i wanna clear out everything once. can anyone tell me how do i get v30 over NSU?? Nokia bangs the users while offering the price and no responsibilty at all on Nokia Care Centers. Darn, they don't even know what i know about s60 phones. Nokia offer me a job n Nokia Care Center. instead of 50 fools, one intelligent is much better....

    You have to wait till Nokia upload latest firmware for your mobile in their NSU program. Once they upload, you can easily upgrade your N85's firmware using NSU. Remember that, after upgrading firmware, format your memory card and hard format your mobile to get best performance without any error. Good luck...

  • Nokia 5800 Xpressmusic Software update to V30

    Hi
    I have updated my Nokia 5800 today.
    havent noticed much changes, but the phone does respond much faster.
    will keep you updated as i notice the new changes.
    Click the kudos, to say thank you.

    If you use the forums search box you will see that people have posted about the new features and issues that this firmware brings.
    Perhaps you should try it so that you know what to expect?

  • N85 Update, now settings are gone!

    Ok, I'm with orange just updated my n95 to v13. I took a back-up of everything but the settings because I thought it was just preferences.
    The update went fine I think but now there is not settings option, now settings wizard, and I can't change themes
    Can someone tell me how to fix and whats happened...please I'm desperate I need my phone ASAP.

    What do you mean settings?
    Settings can be found under the tools folder.
    Themes are usually under tools or they can be under Settings depending on the SW version.
    Open Settings General then Personalisation then Themes.
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • WLAN not working after v30 update on N95

    I saw a previous thread about WLAN not working on the N96 after update.
    I can now confirm that WLAN is also bugged for the N95-1 after firmware update to v30.
    It tries connecting, then after a few seconds, I always get the message "WLAN: Unable to connect. WLAN network not found"
    This did not happen a few minutes before the update. Last firmware version was the v22 (latest one before v30)
    Has any fix been found? My main usage for my phone is for the wifi, and without it I can't do much

    Nokia is the host of this forum, however the forum operates and functions with the participation of common folk, users from all over the world that either share passion for Nokia or are looking for support and answers from other community members...if you want to complain to Nokia there is a : Contact us - button on top right of this page...if you want to try to find answers patience sometimes is a virtue....now the issue of untrusted software, there are applications and sometimes themes that you have installed on your memory card/mass memory that will give that message when you go to application manager it will list the apps that are installed and that are not installed on your device, you can either install them manually or remove them from your phone, the next time you restart your phone you should have no problems with those messages. now the WLAN issue i am not sure about and I am almost certain it has nothing to do with your untrasted software messages.
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Where is Facebook after Nokia N96 V30.033 update?!...

    I updated to v30.033 on my nokia n96 and in i didnt see facebook in share online.
    anyone else missing facebook?
    or is it just my nokia?

    v30 is way better. Would advise to update to it but one thing u will lose it music loudness via speakers on stereo wiedening will be lower than v12.
    If you find my post useful then click on
    Kudos!Nokia N86 8MP (v20.115 / RM-484)
    Symbian-Master

  • Nokia N86 firmware V30 problems

    Hello everyone,
      I just realised that after updating to V30, i cannot install any Jar file, does anyone of you have this problem, please reply. It is affecting my application installation. Thanks

    i tried to reformat the phone, and it worked fine for a short while but become abnormal again and upon restarting the phone, it says system error. Does this happen to anyone????

  • Nokia 5530 Firmware Update

    I see on the 10th of this month there was a firmware update version V30.09.009? But I dont get a choice to install it, device says firmware is up to date. Any help?

    also, have a look at http://europe.nokia.com/support/download-software/device-software-update/can-i-update
    If you want to thank someone, just click on the blue star at the bottom of their post

  • N95 hang after upgraded to v30, please help

    Hi,
           I upgraded my N95 using Nokia Software Updater to v30, NSU shown updated completed. After power down the phone and powe up again, the N95 unable to power up and show the "NOKIA" logo only.
          I removed the baterry and power up again, it only showing the "NOKIA" logo only, pleae help.
    Thanks,

    Try booting it without the memory and sim card in.
    If that fails to work try the hard reset which will revert it to a fresh out of the box state with all data wiped.
    Hard reset:
    1. Switch off the phone.
    2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
    3. While holding these buttons, hold the power button for a second to switch on the phone.
    4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
    It may take a few attempts and very flexible fingers.
    If that still fails then your only option is the nokia care point.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • Direct entitlement V30

    Hi Everyone,
    I have a simple direct entitlement system build into an app. It works perfectly fine if I build my app as a V29 viewer. When I update to V30, users are unable to log in. They get the message saying there is a "problem connecting to the server at this time, please try again later." I know that there were some changes made to the direct entitlement system (as referenced here: Changes to Direct Entitlement infrastructure) but I'm not sure of the impact. So please forgive my ignorance here, but does anyone understand the change that is referenced in the article and how to implement a fix to my system that will make it compatible with a V30 viewer.
    Thanks
    -Scott

    You should call Gold Support for assistance with this. They can walk through debugging steps to find out why it isn't working with your configuration.
    Neil

  • Related to nokia 5800 v30.0.011

    does firmaware version 30.0.011 includes kinetic scrolling?

    Well, I just updated to V30.0.011 today and it seems to be successful (although the GWR lights are still on after keypad locked, which is another issue).
    Trying the answer your "can't switch on" query, I've just spent 2 months in Europe and had such a hell of a time with this exact issue I bought a second 5800 while in Czech (which I'm now trying to resell!). But anyway, I tried a number of things over several very frustrating days: removing expansion card, removing SIM card, removing battery for up to a day, deep reset while holding G, R and Camera buttons, any or all of the above. The most I could get to happen was occasionally get the vibration when trying to switch on. So I went out and bought the replacement phone.
    Anyway, enough rambling. My experience: Wait at least a day or even two! (probably with batt and mem card out). Don't ask me why, but I more often than not couldn't get to the "buzz" stage by waiting just a few minutes or even hours. But normally if I waited a day, could get that far. Next thing, always hold the start button in *until the white screen appears* (thanks to whoever suggested this). So go through the buzz stage and hopefully the white screen will appear (may take 20 s?). Hopefully you'll get the beast booted up - if not, wait another day! Once booted, suggest you do a deep reset *#7370# but rem this may delete personal data.
    So now my phone seems to work reliably (I think?). It took me weeks of trial and error and I'm still not convinced it's entirely fixed (annoying lights) but seems far more reliable now. This process I reckon saved me a trip to Care centre so I'm pretty happy.
    Good luck!

  • Do I need to recreate my app and submit to the Apple store for v30 folio to work?

    I have created an folio using dps v30. I have downloaded the content viewer to my ipad and tested everything works as it should. I then published my new folio. The cover appears in the app store but when I try to download it says I need to update my app. I'm not sure what app it is refering to because I have not created a new version.
    When I go to the DPS App Builder and click 'edit' it tells me the App Version is already v30
    Basicially I haven't got a clue what is going on. I really wouldn't have updated to v30 if I knew it was going to cause me this much grief!

    If you created a folio using the v30 viewer version (folio format) but have, for example, a v28 app in the store, then you have two choices: (1) update your app to v30, or (2) re-create the folio as v26 and update it.
    By the way, there is no reason to choose v30 when you create a folio. Just choose v26. While the viewer has included new features with each release, the folio format hasn't changed since v26.

Maybe you are looking for

  • Backing up and restoring Walkman Playlists

    Is there a way to back and restore the walkman playlists?

  • Help Please -- Routing issue

    Hi All... I have a Linksys WRT54GL Broadband Router. I have recently signed up for DSL. I am trying to connect my DSL to the router, but it doesn't seem to work. My DSL modem assigns 192.168.1.65 ip to my Routers internet interface, with a Subnet mas

  • SAP HR Issue

    Hi All, Need solution for the below 1) If the accumulated earned leaves excess of 90 days have to paid to employee on his gross salary in the month of January. There is no payroll integration. 2) Employee should be able to request for grievance on th

  • I can't use arabic with excel office for mac 2011

    why i can't use Arabic with excel office for mac 2011?

  • It takes 3hours to make QT ref

    Hi everybody, i'm using fcp 7. I've got apple pro res 422 LT clips. The sequence is set in the right format, but when i want to make a qt ref (of a sequence of 2hours whitout audio) it takes me 3 hours!! What is the problem? I suppose that the clips