N85 Voip problem

Hi
I have installed the Voip advanced settings on my N85 but can only make outgoing calls.
I am getting no SIP errors on incoming yet no calls come through.
Is it a software glitch or have i done something wrong?

That probably explains it.
If the phone is disconnecting from the PBX when it doesn't need to place a call then the PBX won't be able to pass any inbound calls to it.
I get the impression that you run the PBX software in-house (asterisk?) so you should be able to query the registered devices and follow logs when you try and pass a call to the N85.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • E65 VOIP Problems

    Hi,
    I was going to post 2 problems I had. But I remain with only one.
    The first problem I had was that I couldn't receive VOIP calls with my E65 anymore. This was in the end linked to the undocumented Menu -> Tools -> Settings -> Call -> Internet call alert.
    If you have this setting on "Off" you will not receive internet calls, only a message that you have a missed call.
    I hoped that I could change the behavior of my second problem with this setting. The problem is that when I use voice dialing to make calls, and I've enabled the setting that my default calling type is Internet, I get a warning message about no WLAN available.
    This is quite annoying since that message kinda removes the advantage of voice dialing. This because you still need to operate the phone, to say Yes to the question wether or not to make a mobile call.
    Does anyone know how to disable that question? If you use the address book to call you don't get this message. Only if you use voice dialing :-(
    DelGurth

    Hello
    I am using a CA-53 which was included in the package my freind got with the phone.When i dial the number you have given me it says 1.0633.58.02
                             16-01-07
                             RM-208
                             Nokia E65
     Is that the latest firmware?Couldn't find anything on google.By the way i tried updating it but that too requires the USB connection and it doesn't recognize my phone.Any ideas?
    Thanks

  • Skype,fring,nimbuzz Voip problem

    if i install nimbuzz on my nokia C5 fring audio dnt work and than if install fring nimbuzz dnt run and skype audio get problem. Please a make voip divider software at nokia ovi store

    Even i m facing the same problem in my nokia c5 symbian device..it's very irritating.fring and nimbuzz uses different versions of Voipaudioserv plugin. additionally m unable to login fring nw no matter hw much time i reinstall it doesn't go beyond the login screen.i'm using fring v4.05(17).if any one has the solution then please let us know.
    Thanks & regards.

  • E63 and VOIP problem, pls help

    Hi Guys
    I got Nokia e63 and have successfully configured local VOIP number but it works when I use the " mobile internet" or " my service provider internet " as my default access point not my home wireless connection. 
    When I set my home wireless connection as default access point inside sip settings then I can make calls but cannot receive , I thought my netgear router or firewall causing problem , i configured e71 ( my friend's fone) and it work both ways without any problem.
    when i change the access point to other than home wireless , no issues on e63 , incoming and outgoing work like a charm.
    any known issues ? please advise bcoz its consumin my mobile internet 
    many thanks

    I have a similar problem, I have my E63 for five months now, For first 2 months i was able to make voip calls no problem and was very happy. 
    I was using Mo-Call and Skype. First of all I noticed a degrading of my Mo-Call where I would have to dial several times to get through. then I was unable to connect at all. If I dial a number now I can sometimes hear a dial tone, the phone at the other end rings and picks up. I cant hear them and they cant hear me. annoying thing is that I get billed for the call by my voip service providers.
    I soldiered on with skype which has now downgraded to the point that I can only communicate with instant messaging although it still rings me and I can ring out.
    I have checked and my nokia software is up to date. needless to say I checked with several known good wi-fi points and no luck. I have had friends check thier smart phones on my wi-fi and all had no problems.
    Mo-Call worked hard to try to identify the problem but my account with them works if I try it on other phones.
    I find Nokia Customer Care website difficult to work with. I have been directed to thier local agent here in Dublin (Fonemenders)  whos phone leads to an answering machine. a message was left and they do not respond. 
    Any help greatly appreciated.

  • N95 VOIP Problem

    After hours of trying, I cannot get VOIP calls to work on my N95 (unbranded).
    I have tried truphone and mobiboo. With truphone, I registered and installed the wizard which did all the settings but when I try and connect through the WLAN, it keeps saying cannot connect.
    I opened the necessary ports and changed to TCP as the helpguide suggested.
    Has anyone managed to get truphone working?
    Please help! Thanks

    Hi oregon,
    Try changing the 'Transport type' back to UDP and the 'Port' to 5062. Restart the phone and see if it will then register.
    If you still have problems log into your Truphone account and submit a support request.Message Edited by damocles on 07-May-2007 02:26 PM

  • N8 VOIP Problem

    I had my Broadvoice VOIP service working fine on my N8.
    I subsequently updated the phone software to v1.1.  I also installed Skype and a couple of other apps.  The next time I tried to use Broadvoice, registration failed.
    I completely removed my Broadvoice profile and Broadvoice (Advanced VOIP) settings, and started again from scratch.  Only once I found that the Broadvoice profile said "registered" but it would not call our (busy signal and a display message saying Broadvoice was not available).
    I then noticed that Broadvoice was showing "registered" on another phone that I have, and I could call out on it.  I shut down that phone, thinking that my N8 was not working with Broadvoice because of a conflict with the other phone.  However, I have not seen "Registered" again.  I have made sure that I have an internet connection, that all other apps are shut down, and that AWCDMA and UAWMAC are both "on."
    Any suggestions?
    Solved!
    Go to Solution.

    Problem Solved!
    The moral of this tale is this:  double check, triple check, quadruple check to be sure that every profile entry has been made correctly.  A tiny typing error will prevent everything from working.

  • X6 voip problem. Need to redial if receive an emai...

    This problem has happened on X6 firmware 31.0.001 and brand new 32.0.002. It has also happened on skype and voipwise voip software. When on a voip call if you receive an email or sms you will lose audio on your call. Needing to hang up and dial again. It is an annoying problem as i use voip alot.

    Hi GemmaMcD,
    Welcome to the forum and thanks for posting. I’m sorry you’re having problems with the bills etc. I can take a look into this for you if you wish. Drop me an email with the details. You’ll find the “contact us” form in the about me section of my profile.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • VoIP problem Nokia E52

    Hi!
    I have a problem trying to setup JustVoIP service on my Nokia E52. I installed the VoIP Settings Manager and set up everything as below:
    Profile Name: justvoip
    Service Profile: IETF
    Default Destination: Internet (I am using VoIP via my Home-WLAN)
    Default Access Point:  none
    Public Username: sip:[email protected] (Note: “sip:” will always be added automatically)
    Use compression: No
    Registration: When needed or always on (choose your preference)
    Use Security: No
    Proxy & Registration Server have identical(!) values:
    Server Address: sip:sip.justvoip.com
    Realm: justvoip.com
    User name: YOURJUSTVOIPUSERNAME
    Password: YOURJUSTVOIPPASSWORD
    Allow loose routing: Yes
    Transport type: UDP
    Port: 5060
    I see the service but I cannot enable it. Whan I try to activate, the message "Invalid settings" appeares. The most funny thing is, that at the beginnig it worked fine! With the same settings! Anybody know, what is going on here?
    Thank you for your help!

    Same issue on E72 and XM 5630 here. Other people experienced it also with N97.
    you can read this info in http://discussion.forum.nokia.com/forum/showthread.php?t=192607
    VoIP3.x registers a user, it writes a randomly translated username in the contact URI, i.e. aweofj293j2c0239jdwiofje0@nataddress instead of username@nataddress 
    Ougoing calls are not an issue (when the client succeeds to register) howevver for incoming calls the server has to put this translatedusername in the request-URI of his INVITE. Some Registars do that, but yours and mine don't.
    This interpretation of how SIP should work by Nokia was not implemented in prior versions of Nokia VoIP settings (v 2. and v 1 used on FP1 models such as E61, N95, etc) thus enabling incoming calls to work for all.
    Now however it seems this is the new standard Nokia has chosen to go for with all new models thus leaving us with a choice to either :
    1- have our service providers patch their registrars to make them work with this new Nokia implementation or
    2- use alternative third party VoIP apps for our devices instead of the native/integrated Nokia SIP client. or
    3- change SIP service provider to use ones that run Registrars compatible with this new implementation...

  • N85: contacts problem

    a problem with my n85 is that i cant make it my personal directory. if you have 2 contacts having the last 7 digits of the no even though their prefix are not the same, the phone seems to recognize it only as one no.
    ex. +639311413   - alvin hme
          +639179311413 -john
          +639189311413 -jessica 
          09229311413 -kate
    supposing have these contacts. when one of them calls you or sends u sms the name will not appear but only the no. or some times if john calls you the display will say " kate calling ". is it because of firmware. i really need help with this problem. since some of my contacts have the same last 7 digits but have different prefixes. actually my two brothers share the same no. but with different network prefixes so when brother A calls,, brother B name shows on the display. when brother A sends and sms only his no appears on the display. hope someone can clarify this thing.
    by the way i live and purchased phones here in the philippines. my brother from singapore brought home an n81 i used it for a time. the singapore purchased phone did not have problems like this. is this pre programmed by nokia for each country on how many digits will the processor start reading? how can i give a solution to this problem?
    since the n series and e series should have a vast memory on contacts. it should recognize each no as one item. so much for the so called unlimited entries on contacts if you could not recognize caller or sms ids. how would you call the e series a business phone if you have several contacts with their 7 last digits the same, but they are in different countries. i hope you could resolve this ASAP.  

    any comments there?

  • RV042G Voip Problems

    I have a SB setup with 2 200-series Smart Switches with a RV042G Roouter in Gateway mode. The smartswitches are breaking up the broadcast domains internally via VLan and the RV042G is prviding WAN access to both switches while keeping the two seperated by setting the Vlan ID's on each router port to different numbers. This works very well but I am having a problem with my Phone.com Voip services. I can make outgoing call just fine but incoming will not make it through to the handsets. I have tried turning off the firewall, disabling WAN2, and turning the firewall back on and setting an acces rule for ALL traffic to the local IP range that my phones are assigned to. Nothing works!! I swapped out the RV042G with a Residential EA4500 and it works GREAT so I know it is not the service provider. The only problem with leaving the EA4500 on is that it has no port Vlan capabilities so, although my VLAN setups in each switch seperate out fine, I can talk from any device on switch 1 to any device on switch 2, and vice versa, because there is no vlan seperation at layer 3 with this router. This is a MAJOR security risk because I have a web server on switch 2.
    What gives here?? Is the RV042G just NOT GOING to play well with VOIP or what??

    Hi Mich, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I apologize for your inconvenience, I found a post it look like the issue you are having, I hope you find this Post useful, https://supportforums.cisco.com/message/3714896#3714896
    “Please rate useful posts so other users can benefit from it”
    Greetings, 
    Johnnatan Rodriguez Miranda.
    Cisco Network Support Engineer.

  • Nokia N85 Texting Problems

    Hi all.  I recently ran into a problem with my n85 regarding texting.  While I am texting, if I try to change the input type (by pressing #) I can no longer text.  My keyboard seems to freeze up.  However, after locking and unlocking the phone (via the side unlock and lock button) I can once again type.
    This is extremely tedious when trying to capitalize things and change to and from T9 etc.
    Has anyone else ran into the same type of issue?

    have you the latest firmware installed,you could try a factory reset to solve this if it fails a hard reset would be the next option the code is *#7370# back up all your data before you do this
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • N85, backup problems

    just got N85, installed all the apps included-ie Ovi, etc
    but cannot cannot to backup the phone??
    always shows as not connected. Everything else shows its connected? i have tried everything. had same problem on my n95 classic ?
    can anyone help.
    i have even reformatted pc and tried on fresh installation, still the same.
    Also Nokia software udater, doesnt seem to recognise the phone type??
    its Nokia N85
    product code 0560506 -seems to be polish product code
    Anyhelp would be appreciated.
    Thanks

    mine doesnt have this problems.
    Maybe you try connect the usb to the main port of your pc.
    Think it is not your n85 problem, since ur n95 also facing the same pro.
    or try downgrade using pc suite? i have no pro using pc suite with n85
    As for software updater, dun have the firmware, tt y does not recognise.
    Was this post helpful? If so, please click on the "Kudos!" star. Thank you!!!!

  • N85 screen problem

    Hello all.
    I'm trying to help a friend with her phone. 
    She has a N85 and she dropped it. The screen was broken but the phone still worked, lights, sounds, etc.
    So I bought a new screen and replaced it. The screen still does not show anything, but this one works (I have tested it in another phone). Do you have any idea of other frequent problem? 

    Unfortunately we cannot help you with that here as it's against the rules of this forum to discuss disassembly or self repair.
    Try an unofficial forum like dailymobile.se for help.

  • N85 ringtone problem

    Hi! I've recently renamed the songs on my N85 & moved them all to my music folder on my memory card. But now when I want to personalise my ringtones, I don't get anything, I only get the default tone. What should I do? Please help!

    I also have that problem with an E71 for Contacts only.
    I am using latest software for Ovi on phone and PC, Windows 7, very recent laptop.
    Synopsis:
    I can sync everything except contacts*
    I cannot sync contacts when the sync options for mail management software (address book) is set to Mozilla Thunderbird. I am using Thunderbird 3.
    If I set sync contacts for mail management software to nothing then contacts syncs fine between Ovi (on PC) and Phone. Have tested with various deletes and inserts on both sides including some dirtyish data (identical key fields). No problems at all. USB cable is therefore not an issue though I did unplug/replug, reboot the PC, switch the phone off/on, all the usual rubbish. Phone/Ovi sync is therefore faultless for contacts. As long as I do not involve the mail management software!
    For this reason I believe that the interface between Thunderbird and Ovi is not clean and has probably failed due to some dirty data in the Tbird address book.
    Supporting this thesis are the very recent live issue of Thunderbird 3 and the Ovi suite and that the preceding reports are very recent too.
    I have reported this to Nokia. I am hoping that they will take this seriously or at least give me a
    clue as to how to dig in to the data or the matching logic. I would like to assist in this way.
    I would expect that a similar interfacing issue has also affected the items mentioned in the previous posts owing to the error code number being identical.
    Let's hope Nokia can do something with this.
    If I get a sensible response I will post it here.
    DD
    Croydon, UK
    *(and calendar/tasks as I do not have outlook but that is not an issue)

  • N85 Charging Problem

    Hi there,
    I've recently been given a N85 for my birthday and i've got a slight issue with it so far, and it is that the N85 makes a loug buzzing noise/tone when i plug the wall charger in does any one know what the cause of it is?
    since the only way i can make it stop making the noise is to take the wall charger out and then remove the battery from the handset, i have used the search function on the forums but haven't found anything thats been helpful
    Thanks in advance
    Victor
    EDIT: i should have mentioned that im using:
    Software version: 11.047
    Software version date: 19-11-2008
    Custom version: 11.047.53.1
    Custom version date:19-11-2008
    language set: 001
    Model: N85
    Type: RM-33
    From the back of the phone:
    Code:0569334
    Message Edited by warninghpb on 29-Jan-2009 06:13 AM
    Nokia N85 Owner

    This is a general flaw with the N85 that has not been adressed with the first firmware version.
    My phone has been way more stable since I completely wiped out my memory card and formated the phone and then reapplied firmware update 11.047. I don't know but perhaps some programs or themes prevent the firmware update from being properly applied.
    When I first bought the phone I could not use the charger because the buzzing sound came off everytime. Now it happens maybe once every 20 times. I would say it's ALMOST fixed.
    Needless to say you need to backup your info, and after this procedure you will lose all your preinstalled proggies. Rather than restoring the phone state, I would recommend reinstalling each program. A tedious process, but it worked, at least for me. Just sharing my experience which may or may not work for you..
    There's plenty of info in these forums about how to format a memory card and how to do a hard reset on your phone but let me know if you need more details about these procedures.
    Hope this solves your problem!

Maybe you are looking for

  • How to connect Apple TV to analogue amplifer?

    Hi, I can use HDMI to connect 2nd gen Apple TV to my HDTV, but would like to use separate stereo speakers. These speakers are connected to an amplifier that only has analogue inputs (no digital optical or HDMI). What is the easiest workaround for thi

  • What is "rb driver" and why do I need it?

    Hello, I am trying to implement Oracle Secure Backup Express on Windows 2003 x64. The server is HP DL380 G5 and the tape drive is HP Ultrium 448 (it is SCSI, not FC devce). I disabled the "removable storage" service, installed OSB, configured the hos

  • Multiple transform/assigns for one variable - is this possible?

    Hi, What I am trying to do is read in a complex XML file. Transform some data, add some other data from another source and update a table in the database with all data. So currently I read in the XML file. Do one big transform to map the majority of

  • Desktop Manager for Mac error message KB19454

    Hi All, I am new to the community and would appreciate any assistance. I have two recent problems for which  I am seeking troubleshooting advice. The priority problem is mentioned first below. I've just encountered this error message, "For help resol

  • Powerpoint 2010 will not open any old files

    Hi Guys, Just installed Office 2010, everything works fine except for the PPT issue. I download .ppt files from my school to take to class, but Powerpoint 2010 will not open these files. The first window says " powerpoint has found a problem with con