N86 8MP, Nokia Email 2.1.0, Access point troubles

I know that his has been an never ending saga. I just don't seem to be able to give it up.
There is a well known issue about Nokia Email 2.1.0 not being able to define group access points.
When I try to do that I am offered only particular access points or "None". This is ever so annoying as I have to manually change the access point every time I leave my home WiFi.
I am aware that there are ways around this using connection manager apps (I tried several: Auto WeFi, Easy WiFi....  ) but I was not happy with the results. One of them even disabled me from editing my access points.
It is weird that it is possible to define "Internet" as a access point for Exchange but not for normal e-mail providers.
Some people suggested to setup acces point to "Default" while setting up a new email account. However, I've never seen this option.
I think Nokia's terminology is so vague. What would be "Default" connection as opposed to "Internet"?
In addition, in "Network Destionations" it is possible to define the "Internet" group as "Default" so this will be the same thing, or...??? Am I missing something?
I stumbled upon this article that Nokia would release a patch addressing this access point issue.
I spent hours searching for the patch to no avail. Does anybody know whether that patch exists at all?
http://www.e71fanatics.com/2009/01/big-ooops-in-recent-nokia-email-version.html
Having exhausted all possibilities I was thinking I could install Nokia Messaging 9.7. Apparently this version is compatible with S60v3 unlike the Nokia Messaging 10.2.
I have no idea whether Nokia Messaging 9.7 was ever ment to be for N86 8MP but if not does anybody know whether the unsigned version could be installed instead?
I would appreciate any piece of advice or suggestion.
Alex

Hello!
I can't update my e-mail client via Nokia e52 internet browser.
I enter address email.nokia.com, click download link. The application Nokia Email 9.07 has downloaded. After this the suggesting message to install Nokia Email 9.07 appears. But error appears after my agreement - "An incompatible version of this product is detected, and has to be uninstalled first"
I have no possibility to uninstall detected Email, so I don't see any Email client in Application Manager.
Nokia developers, please, fix this bug as soon as possible

Similar Messages

  • Nokia E6 - Where is the Access point setting for Y...

    I have my Nokia E6 configured for my Corporate Email, MfE and it works fine.  In the settings for MfE, I see a setting for Access Point, where I choose Internet with Priority 1 as my Home WLAN and Priority 2 as my GPRS connection.
    Then, I started to configure my private Yahoo mail, evertyhing is done, it works fine, but I do not see any settings for Access Point for the Yahoo mail..
    Does this mean it picks up the settings from MfE??? 
    Can any other NOkia E6 users or experts comment on this??

    Hi Stuart,
    To answer your question:
    There is no shared secret for the ACS itself.
    If the ACS is going to communicate with another device, you have to define a AAA client and define a shared secret.
    ACS 4, used that shared secret to protect/secure the replication, in ACS 5, the replication secured with encryption and not shared secrets(hash).
    Rate if useful

  • WRT150N as access point troubles

    Trying to use a 150n as an access point and am having troubles.
    First my setup:
    PC on XP, receiving wireless from my ISP through a wireless card in the PC.
    Have no way to connect the incoming ISP signal directly to the 150N.
    What I want to do, and have done it before with access points, is to recieve my ISP through my wireless card, send it to the 150N router via my network card, and then be able to access the 150N wireless signal throughout my home with a laptop.
    I have done the searches and done the procedures to change the IP address of the router, however when I am done doing this I can no longer access the 150N through my network card. Have tried with a couple different computers and each time after the router is reconfigured it crashes the network card in the computer.
    The only way to get back to the router is to press the reset button and start over.
     I'm about to trash the router and go back to a standard access point of a different brand. I have never had this problem before. With today's technology there's no reason this shouldn't work with a standard router, yet all of them I see require a direct connection to a DSL or cable modem in order to work.
    Help...........
    Thanks

     I'm trying to share the incoming connection wirelessly through the router/access point.
    Incoming wireless to my desktop via wireless card, send that out through the network card to a router/access point, thereby creating my own internal wireless network which I can access with my laptops throughout the house.
    The incoming wireless is a bit weak, so it does not allow a reliable connection to the laptops.
    Basically the desktop will only function as a server system to the internal wireless network.
    Done the same in the past, just gotta figure out how to do it with the new Linksys router.
    Thanks
    Tom

  • N86 8MP nokia messenger problems.

    the nokia messenger pop up and asked me to log in my msn account.so i log in my msn account and it synchronise my msn email. after that, i thought it will only synchronise my msn email once i log in or online. however, the nokia messenger will automatically go online using gprs and stream and synchronise my msn email once a while and this is wasting my money.i cant find a way to stop the n86 from doing that. so anyone got any idea how i can stop it>?? pls reply asap because this is wasting my money. thanks for ur infos.

    Please give me Kudos! i'm hungry
    If this post was useful, thank me by clicking the Kudos! button.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • E52, Nokia Email ver. 9.06(24), connectivity via W...

    Hi,
    I have no problem to reach new mails from my private account via WiFi access point. When I change (using "Options:.." at the main email window) to WAP access point it doesn't work. WAP access point is properly setup, because I can use it without any problems to browse Internet pages.  Please, help !
    Best Regards from Warsaw
    Happy New Year 2010

    Oh..I read it, but there says that: Wap or Email/Web. This is the real problem. If I change from orangewap to orangeinternet (APN) this will not remain to wap, and internet apn is more expensive. I pay for WAP only, not for Internet. thanks for help, but it didn't help me so much. I can give you some information about my settings (it was made with my phone guide..I insert only my e-mail and my password). My settings are next: IMAP, Server Name: nokia-prem.imap.mail.yahoo.com , Signature: Activate, Port: 143, Secured Connection: No. And settings from Account Settings are next: Server Name: netac54.vie.hosting.nokia.com . If you can give me another solution I wait for it. Thank you

  • Can someone post s40 v6 access point wml?

    Hi,
    i use a nokia c3-01. I cant use email on my nokia as in the commercials suggested because my provider needs proxy settings. For the standardinstalled Internetbrowser i can configure a alternative account but the standard email prog just support wlan or access point. and in the nokia s40 v6 menu there seems to be no possibilty to configure access points with proxy.
    Does someone have a wml example for nokia s40 v6 to get access point for the email prog in nokia c3-01 with proxy?
    I found a WML-Example for Nokia s40 v5 but the c3-01 does not acceppt and does not show the access point after senden the generated .prov file to the c3-01. If someone needs help how to convert a wml to .prov i can help if needed.
    heres the access point with proxy wml example for s40 v5:
    <?xml version="1.0"?>
    <!DOCTYPE wap-provisioningdoc PUBLIC "-//WAPFORUM//DTD PROV 1.0//EN"
    "http://www.wapforum.org/DTD/prov.dtd">
    <wap-provisioningdoc version="1.0">
    <!-- This WML doc created by Ravi Mathur, January 12 2008 -->
    <!-- HowardForums username: ravidavi -->
    <characteristic type="BOOTSTRAP">
    <!-- Name of the configuration -->
    <parm name="NAME" value="Bild Postpaid JAVA"/>
    </characteristic>
    <!-- Defines how network access occurs -->
    <characteristic type="ACCESS">
    <parm name="RULE" value="Default Rule"/>
    <!-- Connect through specified proxy -->
    <parm name="TO-PROXY" value="BildProxy"/>
    </characteristic>
    <!-- Defines proxy parameters -->
    <characteristic type="PXLOGICAL">
    <parm name="PROXY-ID" value="BildProxy"/>
    <parm name="NAME" value="Bild Proxy"/>
    <characteristic type="PXPHYSICAL">
    <parm name="PHYSICAL-PROXY-ID" value="Bild Proxy"/>
    <parm name="PXADDR" value="139.7.29.1"/>
    <parm name="PXADDRTYPE" value="IPV4"/>
    <parm name="PUSHENABLED" value="0"/>
    <characteristic type="PORT">
    <parm name="PORTNBR" value="80"/>
    </characteristic>
    <!-- Connect through specified access point -->
    <parm name="TO-NAPID" value="BildNAP"/>
    </characteristic>
    </characteristic>
    <!-- Defines Network Access Point (NAP) parameters -->
    <characteristic type="NAPDEF">
    <parm name="NAPID" value="BildNAP"/>
    <parm name="NAME" value="Bild NAP"/>
    <parm name="BEARER" value="GSM-GPRS"/>
    <parm name="NAP-ADDRESS" value="access.vodafone.de"/>
    <parm name="NAP-ADDRTYPE" value="APN"/>
    <characteristic type="NAPAUTHINFO">
    <!-- PAP is "normal" authentication -->
    <parm name="AUTHTYPE" value="PAP"/>
    <parm name="AUTHNAME" value="Bild"/>
    <parm name="AUTHSECRET" value="Bild123"/>
    </characteristic>
    </characteristic>
    <characteristic type="APPLICATION">
    <parm name="APPID" value="x-midlet"/>
    <parm name="TO-PROXY" value="BildProxy"/>
    <parm name="NAME" value="Bild Proxy"/>
    </characteristic>
    </wap-provisioningdoc>
    thank you
    MW

    I added one access point in settings and my email is working now.
    I've done below steps, you could try to modify to your internet access point.
    Menu->Settings->Configuration->Personal config. sett.->Options->Add new->Access point Account name: VFNZ internet Access point settings:  Data bearer: Packet data  Bearer settings:   Packet data acc. pt.: www.vodafone.net.nz   others keep the default values. Then back to the personal accounts and activate the VFNZ internet from Options.
    Ovi Store can be accessed normally.

  • N95 access points

    On my n95 i have set-up defined access points, my home router, other wlan routers, and my t-mobile internet. When i open applications that require an access point connection, not all of my access points will show up when propmted to select one. In other words, if i open internet radio, worldmate, nokia search all of my access points are shown to select from. If i open yahoo go, opera mini, em tube, none of my wlan access points are an option, only the t-mobile access point. Is there something in the settings that i'm missing? Thanks for any help given.

    Hi n95tim
    Is this a network branded or SIM free version of N95?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Tom Tom on Nokia N86 8MP?

    Hello all, Would appreciate some advice as to the best sat Nav software on the market? Having owned a Tom Tom Sat Nav I would prefer if there was compatible software for my Nokia N86 8MP mobile phone as Tom Tom are usually user friendly! Also would like to here from people that have used the following software and there experiences with it: Navmii Co Pilot N Drive Route 66 Garmin XT Mobile. Thanks in advance Khan

    Thanks for the reply "jjegan" I did not realize there was a co pilot 8 due out for Nokia, must say looks the business. Any ideas mate when it is due for release? Heard good things about the Garmin Xt mobile but put off due to them no longer supporting this and last update to map i believe was in 2008! NDrive looks ok but again put off due to customer support in Portugal and no office in UK. Any ideas on the Navmii? They seem to be located in UK and reasonably priced at £29.99. If release date is not to far away for copilot 8, i think i will hold tight for this version but thanks for the input much appreciated. Khan

  • Nokia Email Access Point Configuration Disappeared

    I`ve just upgraded to the new Nokia Email client on my N95-1 (model RM-159). It says it's version 9.04 (21).
    Since upgrading, I haven't been able to configure the Access Point to be used by the email app, which used to be under General|Service Info. This is quite important to me, since I only want to let the app work when using WiFi.
    Does anyone know what happened, or how can I fix it ?

    This works for the E71: for the time being a workaround for the access point problem:  
    I set my SmartConnect connection (you can only download this from the Download icon on your phone) group as the default APN, I have the client using Wifi if available and the cellular network if not. This MUST be configured at initial setup, ie when you install Nokia Messaging, change it from "default" to the SmartConnect access point group. 

  • Nokia N86 8MP software update failed.Any1 can help...

    I just bought Nokia N86 8MP,my phone cant update to latest firmware version.It say software update failed, for optimum connectivity,your USB cable should be connected directly to the pc,and not via USB hub,USB keyboard orl aptop docking station.My USB cable is fine and ok.I closed my antivirus and turn off the firewall,but it still failed.I also uninstall the Nokia Pc suite and software updater, and download the latest version from nokia.com.my but it still failed.Any1 can help me?I am using Window XP service pack 2.

    Yes!
    http://europe.nokia.com/get-support-and-software/d​ownload-software/device-software-update/feedback
    Help I'm trapped in a sig factory.

  • Nokia N86 8MP S60 interface

    Just wonder is possible to get N86 standby theme as the Nokia 6730?
    Cause its very good to have Contact Bar as standby theme in 6730.
    Both Nokia set also produce in 2009 and both also running on S60 FP2. Hope can get this features

    I want this update too
    The moderator did not understand "1+" replys and deleted my previous post.
    N8 FW: 022.014 -- Please separate Artist & Albums!
    N86 8MP FW: 30.009 -- We need a new FW on this phone!
    E51 FW: 410.34.001
    E70 FW: 2.0618.07.10 -- Why no v3 for my code?

  • A Glitch with Nokia N86 8MP

    Today I purchased a Nokia N86 8MP, and I found some problems with it. When I turn on Theme Effects on, everything is fine, but when i place cell phone horizontally to view horizontal menu, it's animation glitches and makes it ugly.
    Here's a video i made to show what happens,
    If you know how to fix this, please help me. 
    http://www.youtube.com/watch?v=M5e1kfu9Cs8 
    Message Edited by Tekilas on 03-Jan-2010 05:32 AM

    Try to reinstall your firmware.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • Nokia email - access point

    I have an N96 with S60 r3 fp2. It supports "destinations" (ie access point groups) as well as the concept of a "default" access point (group).
     Only "new" apps use these capabilities. The internal imap client seems to be ok with default, but "nokia messaging" is not and will only allow a specific AP to be selected.
    Since I have trouble with 3G/GSM at work I roam onto WIFI for other apps. NOkia messaging needs to do the same.
    Ideas?

    This works for the E71: for the time being a workaround for the access point problem:  
    I set my SmartConnect connection (you can only download this from the Download icon on your phone) group as the default APN, I have the client using Wifi if available and the cellular network if not. This MUST be configured at initial setup, ie when you install Nokia Messaging, change it from "default" to the SmartConnect access point group. 

  • N86 8MP... ANY GENIUS PLZ HELP

    i HAVE ONE PROBLEM WITH N86 8MP, WHENEVER I M GOING TO OVI STORE OR EMAIL OR ANY OTHER APPLICATION ACCESSING NETWORK CONNECTION, MY PHONE STARTS RELOADING AND RESTARTS ITSELF.
    pLZ HELP WHAT IS PROBLEM AND HOW TO SOLVE IT.
    DR.MUKHTAR ALI.
    [email protected]

    I met this kind of problem before with the corrupted SD card on my Samsung phone but it came out I got nothing from the card as the corrupted card can not be recognised by the computer when connected. So I hope you are lucky. (your card can be detected,)
    First, take the card from the phone (powered off) and if it has a "write protect" tab then lock it now. Do not try and write anything to the card or you risk causing more problems. You can either plug in you camera to the PC as it should appear as a “Removable Drive” or put the card in a card reader attached to your PC.
    Next, if you are comfortable with using a PC then you can download a photo recovery utility that will recover your photos from the following link:
    http://www.cgsecurity.org/wiki/TestDisk_Download (Windows, freeware)
    http://www.apple.com/downloads/macosx/system_disk_utilities/photorecovery.html (for Mac OS X shareware)
    If such free utilities fail to help, you may rely on some paid photo recovery software. If you search the web for photo recovery software you will find many. One I have tried successfully is Wondershare Photo Recovery 2.1 that used to be bundled with some other products. This program can also recover music and videos. Now you can get it from the link below:
    http://www.wondershare.com/pro/photo-recovery.html
    You can try the demo to see what you can recover before buying.
    Remember - Do NOT try & write anything back to the card until you can recover your pictures and music to your PC safely! Merry Christmas

  • N86 8MP Questions

    Hello everyone,
    I am an enthusiastic N86 8MP user and I am content with the phone. However I have a few questions if you would mind answering.
    *I have recently hard-formatted my phone to make it faster. When I turned it on for the first time I noticed that the device wanted "Lock Code" after entering the PIN code. Whatever I have done through security settings I could not manage to solve the issue.(I do not want to enter the Lock Code everytime I switch on the device.)
    *When I tried to restore the backup I have made a day ago I noticed that not all my Sent Messages were syncronized although the ones in the Inbox were syncronized. All of the sent messages were present in NOKIA Ovi Suite 2 and I manually dragged and dropped them into "Sent Messages" folder on the device/Through OVI GUI. However I came to the realization that all the names in the syncronized messages were reversed.(For example John Doe[expected]-Doe John[real])How can I revert the names of the recipients and senders back to name-surname?
    *How can I move all the messages from internal phone memory to mass storage? I have tried once and got an error saying "Selected memory card could not be accessed. Messages will be saved on phone memory."(the message may vary I have translated it) How can I solve this issue?
    *OVI sync question: How can I syncronize e-mails, multimedia, media, bookmarks, multimedia messages and short messages through OVI Internet database? What settings should I use? I did not get anything explained on OVI's website or on the manual.
    *According to my observations avaible phone memory decreases over time and the phone becomes to feel sluggish(especially when switching from horizontal to vertical view or vice versa. How can I clear the phone of junk files? What kind of utilities should I use?
    Thanks for reading any kind of help would be appreciated.(Size adjusted for reading comfort)
    Regards

    I am not sure everything I say may help since I do not hold an n86, however with the similarilty between Nokia phones, try these:
    1. Go to the menu for phone security for s60v3 like the n86, I think its in Menu>Tools>Settings>Phone management>Security if I am not mistaken. Choose phone security (it may also be labeled as phone and sim security) and disable phone autolock.
    2.  For the reversed names, go to Contacts>Options>Settings>Name Display and change it to First Name Last Name
    3. When did you do this?Immediately after restoring?turn your phone off and reboot it. try it again after 10min or so.
    5. Try to do it through ovi suite.
    6. If you use internet services often, the phone will accumulate web privacy data, same with PC's. However as we both know PC's have 100s of gigs of memory so it is not a problem, however on phones it is. Go to your browser and go to options>clear privacy data. You will be asked to select which privacy data to delete. The others you delete at your discretion but you MUST delete the data in the cache. I get about 30mb from that in a week. ^_^
    Hope I helped. Please press the yellow kudos button if you find this helpful. Cheers. ^_^ 
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

Maybe you are looking for

  • Photo album in iPhoto

    How do you like iPhoto as an organizing tool for your photos?

  • Trouble being unable to download movies

    Hi, I have successfully downloaded movies from itunes for a while now.  However, tonight when I tried to download two separate movies, I received the following errors: There was a problem downloading the movie. Part of the files seems to be corrupted

  • Oracle BPM Workspace and IE 11 Compatibility issues

    Hi all, I am using Oracle BPM 10g and when I use IE 9 (till IE 11) or firefox latest versions , chrome,etc.. I get a pop-up with the title "execution" and unable to close the pop-up as well. Can you please suggest if there is some configurations I sh

  • Can I change the location of the TOC file?

    Hi, In Robohelp (I have RH HTML v.8.02.208), it is easy enough to add a table of contents to a project; however, it seems that a RH TOC can only exist in the root directory. Is there a way around this? My motivation stems from some autogenerated mate

  • How To Pass Data Between A Main Report and a Subreport

    Hello,   I'm working with Crystal Reports Professional XI.    I have a main report with two date parameters: BeginDate of Date type and EndDate of Data type.  The main report has no details being printed instead it's grouped by a formula field and di