N86 8MP v10.086 firmware not updating to v20 & v21

Hi All,
I had buy a Nokia N86 8MP on 3rd Feb'2010 from a reputed mobile store in bhubaneswar,Orissa,India
The firmware version installed is ''v10.086''
As per nokia ''v20''& ''v21.006'' is released.
So I go for an update via NSU and via AIR, but its showing your firmware is upto date and no update is there for v10.086 where as v20 and v21 is already released.
My phone is also not associated with brand such as Orange,Vodafone,T-mobile etc.
Also I have buy from a certified mobile shop.
I have also gone through Nokia.co.in site, its says to enter the code of the mobile which is below the battery,I also go for that and same result comes out v10.086 is latest for the code.
I can also give my code if somebody ask for it
Is there is no update for my mobile?
Is face detection I can't avail?
As per nokia v20 & v21 is already released but why not for my N86?
Most importantly Is in future whether I can avail this updates or not?
Please help me out for which I ll be grateful to you neither my 20k bucks will be simply wasted.
I am awating for the reply..
If somebody send a mail to me regarding this problem mentioned , I ll be the most happier person in the world.
my mail id: ************
Thanks & Regards
Amit Dash.
All IZZ Well..

I switched on the Mobile and what?
It's already came with FW v20.115
N86 8MP v30.009
The world became a better place on July 8, 1979...

Similar Messages

  • PAP2T Firmware not updating

    Is there a way to force the updater to update a PAP2T with the latest firmware?
    I have a PAP2T that I purchased from EBay.  When I try to update the firmware, the updater goes all the way through and then tells me it failed. 
    The firmware version on the PAP2T says 3.1.15(LS).  Isn't this firmware for the PAP2 instead of the PAP2T? Is there a way to force the updater to update the firmware on this device?
    The device appears to work fine except for when I try to return from call waiting.  The person on the other end hears me, but I cannot hear them.  This is why I want to update with the latest firmware.

    There are two ways to update a firmware of an SPA or PAP2 according to this FAQ . Just double check if you have downloaded the right firmware and make sure also that your unit is not automatically fetching  a firmware from your ITSP

  • Creative Zen Xtra Firmware not updat

    Hi everyone,
    After a few months of disuse I got out my old Zen Xtra 30GB. I turned it on and it booted to Rescue Mode. I formatted everything and erased the OS. Now when I plug the player in (After installing the most recent drivers) Windows recognises it and Media Source makes a half-hearted attempt at syncing it, but when I try to update it with the latest PlaysForSure firmware the updater first gives me "Your player's current firmware is the same as this version. Do you want to continue?". I click yes, and the firmware updater says "Your battery levels are too low. Please charge your batteries before you proceed."
    Obviously I can't charge the batteries while in Rescue Mode, so I am unable to proceed with the firmware update. The player is plugged into the mains as I do this. The player appears in Media Source (latest version) and in the device manager without a malfunction sign or anything. Also the old version of the firmware updater before PlaysForSure doesn't recognise the player.
    Is there anyway to bypass the battery level check so I can install the firmware? Thanks.

    You won't believe but I had the same problem just couple of days ago with the same player (but 40 gigs). I was confused just like you, so I tried to format the disk again (while connected to PC) and reloaded the OS. Then a message appeared like 'Now you can update your firmware' or something like that, so I ran the firmware from PC, and no message about a battery level appeared, and the firmware was updated correctly. Try it, and let me know if it's OK! Good luck!

  • Firmware not updating for nokia 5800

    I got my phone from chicago flagship, they said it's a Euro VErsion of nokia 5800
    when I go to device updates, it says no update available, although version 11 is out.
    when I do it from the PC suite, it says that your network provider has not approved the
    update, no update availabe.
    I'm using T-mobile US.
    Anyone have a clue on how I can update my phone, I get the usual 5800 firmware 10 bugs, like
    unable to edit and add birthdays on contacts, alarms not working.
    I really like to have it updated.
    Thanks in adance. 

    *#0000# what does it say when you plug in this code? 
    that is strange because euro codes usually are one of the first ones to get the firmware updates. you can serach your product code via google and find out if it is indeed a euro version of the code. this is an unlocked/unbranded unit right? you should have no issues in regards to provider in that case. does nokia flagship chicago have a service departmetn as well? you can always take it to them and request that they do the update for you. still this should not be the case if you have an unlocked/unbranded euro version of the device.  
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • SMC Firmware not updating

    I have a question on the SMC firmware update. On the apple site, it mentions 1.14f4 as latest version. I checked, and mine is 1.13f3. I actually do have a problem with my macbook shutting down, but the updater says i do not need to update. Any ideas?
    Thanks in advance.

    The SMC update does not apply for the Core 2 Duo's. Now when your computer shuts down, is it shortly after disconnecting the AC power cord? If so you could be having battery issues.
    Also, have you recently installed any RAM upgrades? Do you have any external devices connected to the computer when it shuts down such as a printer, digital camera, memory stick etc.
    I would advise disconnecting all external devices if you have not already done so and removing any additional (third party) RAM that may have been installed and seeing if the issue persists. I don't doubt that your computer is shutting down, but I do not believe that it is due to the same issue that the older macbooks were having, and the SMC firmware update addressed.

  • N70 firmware not updating

    Hi, I'm updating from 3.0546.2.3 to 5.0705.3.0.1 and
    I am at step 3/3. the window says updating software please wait - estimated time left is 10 minutes and has said this for the last 2 hours and there is no option to cancel. Any ideas appreciated. Thanks

    Unfortunately something has crashed, either your PC, the phone or the NSU.
    All you can do when this happens is pull the cable and hope for the best. If it won't switch back on try removing the battery for a few minutes. If it still doesn't work reboot your computer and try this:
    First remove the battery for 5 minutes, reconnect the battery, connect it to your pc and run the updater again. Leave it for a few minutes and it should go into recovery mode.
    If not disconnect it and try a hard reset.
    Hard reset:
    1. Switch off the phone.
    2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
    3. While holding these buttons, press the power button and switch on the phone.
    4. Release when the phone shows the nokia logo or shows other signs of life like the language selection screen.
    If that fails to fix it try the advice offered in this post by drummer27:
    /discussions/board/message?board.id=swupdate&message.id=14152#M14152
    If that still fails then the last option is to take the phone to a nokia care point.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.
    Message Edited by psychomania on 11-Aug-2008 03:44 PM

  • Nokia N86 8MP software update failed.Any1 can help...

    I just bought Nokia N86 8MP,my phone cant update to latest firmware version.It say software update failed, for optimum connectivity,your USB cable should be connected directly to the pc,and not via USB hub,USB keyboard orl aptop docking station.My USB cable is fine and ok.I closed my antivirus and turn off the firewall,but it still failed.I also uninstall the Nokia Pc suite and software updater, and download the latest version from nokia.com.my but it still failed.Any1 can help me?I am using Window XP service pack 2.

    Yes!
    http://europe.nokia.com/get-support-and-software/d​ownload-software/device-software-update/feedback
    Help I'm trapped in a sig factory.

  • N86 8MP will not pair up with car bluetooth

    Hello / Hi.  This is THE most frustrating and annoying time I have spent with a phone, and it makes me doubly detremined to go 'anything but Nokia' in the next few months.
    Anyway, my N86 8MP is under warrantee so when it broke last week, the Australian Nokia Care people replaced it - and I picked it up today.  Got to my car and the darned phone will not pair up to the bluetooth in my car.  This is the second time I have had problems pairing up with this phone - the first being when I got the N86 five months ago. 
    N86 Phone will find all kinds of 'devices' including the Parrot Bluetooth in my VW car - it just will not 'pair'.  Now have about ten 'devices' on my N86 that it found while doing what the downloaded N86 instruction manual told me to do, and cannot delete any of them.  What I am copying and pasting below, taken from page 56 of the Nokia manual, just is NOT possible.  I mean one is not able to Delete any fool thing - there isn't even a 'delete' option on my phone.
    To delete a pairing, select the device whose pairing you
    want to delete and Options > Delete. To delete all
    pairings, select Options > Delete all. If you are currently
    connected to a device and cancel the pairing with that
    device, pairing is removed immediately, and the
    connection is ended.
    I have updated the phone software this evening - when supplied new to me by Nokia Care this morning, the phone was about two or more years behind in terms of software - but after downloading some 35 Mb an hour or two ago, it now has the latest version 30.009.  STILL I cannot pair my bluetooth.  STILL I cannot delete any of the devices my phone found earlier today.
    Oh, by the way, I have tried three other brands of phones and all pair up with my car bluetooth.  So it's not the bluetooth device.
    I cannot tell you how frustrating it is to have a new phone that dissapoints me as much as the one it replaced.  Oh, Nokia replaced my previous N86 because it wasn't charging the battery properly.
    But I ned to get this fool phone to work - at least for now.  And it is SO frustrating when the
    Nokia N86 8MP User Guide Issue 3.0 does not help - AND tells you to do things that my phone just cannot do - like go into Options Delete, when it doesn't exist.
    So how DO I delete all the devices my phone found?
    And how DO I get my phone to recognise and pair with my car bluetooth?
    Please help.
    Thank you SO very much.
    Pete

    Hi ganesh8888
    Unfortunately the UDP = User Data Preservation feature of your device is working to your disadvantage here, whereas in days of old a firmware update would have wiped out settings. Provided that you backup essential data first you can then hard reset - hold the following buttons * (star key), 3 (number button) and green (phone key) depressed and power on whilst keeping these three keys down until after Nokia "shaking hands" appears. This should return device to out of box state showing "select country".
    Unfortunately you don't say which Parrot Bluetooth you are using but as example support here:http://www.parrot.com/tur/musterihizmetleri/musterihizmetleri/parrot-sk4000/compatibility/?idproduct...
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • MFE v 2.10 how to updat for N86 8MP

    Greetings from Sydney,
    I have a N86 8MP with software updated to v20.115 installed.  Mail for Exchange (MFE) is showing as v 2.1.0. (from about) I have tried to update via the applications tab and nothing is available.
    With v2.1.0 I do not have the option available for Out of Office or to set Flag status for e-mail.
    I have tried to install 2.9.158 for S60 v3 but it comes up 'update error'.
    Does anyone know how to update MFE on this mobile?
    Thank you

    smileys are cool   but too many are bad  
    whats wrong with win xp? its the most stable version i've ever used.
    it also sounds to me like you are asking questions here because you are being ill-advised
    if you have two hard drives you want to install, load up win xp and partition and format them both
    if you want to keep data off the one drive, format the other and keep it; win xp works with both NTFS and FAT32 partitions, so if you keep it as a FAT32 disk and don't format it, win xp will still be able to read it if it is connected as a slave drive
    and as for whoever advised to buy a PCI controller card, this is the 21st century!! all motherboards have IDE controllers now!! i remember the old 486 days with the E-IDE VLB controller cards, now thats going back a bit!

  • N86 8MP video camera useless since new firmware (2...

    Hi,With v20 firmware, I used to have a problem where when I recorded a video, a couple of seconds after starting the recording it would stutter, once. Not a major problem.With v21 firmware, it now stutters every few seconds when recording video (and the stutters are permanently in the resulting file during playback)... Which makes the video camera totally useless for me. Not great as I have a young baby daughter who I've been filming a lot with my phone, and she's not going to be young for long.Can anyone else recreate this problem?

    Video stuttering on FW: 30.009
    Hope they release the next firmware soon 
    N8 FW: 022.014 -- Please separate Artist & Albums!
    N86 8MP FW: 30.009 -- We need a new FW on this phone!
    E51 FW: 410.34.001
    E70 FW: 2.0618.07.10 -- Why no v3 for my code?

  • MAPS update N86 8MP? (indoor positioning through W...

    Hi!
    Why have I not recived the indoor positioning through WiFi update for Ovi Maps like the E5 did? 
    N8 FW: 022.014 -- Please separate Artist & Albums!
    N86 8MP FW: 30.009 -- We need a new FW on this phone!
    E51 FW: 410.34.001
    E70 FW: 2.0618.07.10 -- Why no v3 for my code?

    @heineoen
    WiFi/Network introduced in OVI Maps v3.04 with free navigation although you can purchase Maps Booster from OVI Store which I found very effective upon N95 running v3.01:http://store.ovi.com/content/16194
    Happy to have helped forum with a Support Ratio = 42.5

  • Can not update iphone firmware using iTunes "The network connection timed out"

    Hello,
    I can not update the iphone firmware using iTunes.
    Messagte displayed
    "There was a problem downloading the software fo the iPhone. The network connection timed out.
    Also seen stopped error -3259
    I have run network connectivity tests from iTunes and All Tests passed.
    Can anyone help?
    Thank you,
    Joan

    Did you make sure it was the exact file for your device and the latest version? I just downloaded the latest file for my iPhone4, put it in the folder I mentioned above and it ran the install versus downloading the file. This problem where it times out after downloading is a big Bug within iTunes that has been there ever since IOS 7.0 was released. I wished these apple developers would just fix iTunes. There are a ton of complaints about this issue. I sure miss Steve Jobs running this business, I really feel like it's gone down hill after he left.
    I hope this helps! 
    Regards.

  • HT4759 My mac mini is not updating its software to OSX Lion v10.7.5.  I would like to use iCloud on my desktop along with my iphone and ipad but the auto updates are only upto 10.6.8.

    My mac mini is not updating its software to OSX Lion v10.7.5, which I need for iCloud.  I would like to use iCloud on my desktop along with my iphone and ipad but the auto updates are only upto 10.6.8. 

    You need to get the newer version from the Mac App Store.
    (70404)

  • Problem I can not Update new Nokia X6 8Gb firmware...

    Problem I can not Update new Nokia X6 firmware Version V.21.0.005,
     can someone tell me where can I get new Nokia Software Update for X6 8Gb,
     I tried to update new firmware, but this is new version is not Aviable 
    where I can get new version in my phone serial number: numbers end
     in ( 2587 ) and when will update available for my phone serial number be
    Thank you 

    Reasons why a phone cannot update:
    1. It is a country variant - country variants often get the updates later, or have updates skipped altogether. A Turkish country variant product code for example, skipped v40 and updated from v31 straight to v50.
    2. It is network branded - phones acquired from network providers or these providers' stores SIM free are branded, and will not get updates until the networks approve and modify the updates to their liking.
    3. Special editions - These special editions are chartered editions and may never get updates unless taken to a Nokia Care center.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • My 160 classic wil not update the firmware 1.0.1  ?

    hi al my 160 classic wil not update the firmware 1.0.1 what do do rong also after sync not al my covers ar on my ipod

    Hi hrcpinfreak,
    What exactly happens when you try updating your iPod's firmware? If you're getting an error message while syncing your iPod, then please quote what that precisely says.
    You could try these five iPod steps, as a start:
    The Five Rs
    But we won't really be able to give you specific instructions unless we know some more details, so please let me know what's going on!
    -Kylene

Maybe you are looking for