N86 8MP video camera useless since new firmware (2...

Hi,With v20 firmware, I used to have a problem where when I recorded a video, a couple of seconds after starting the recording it would stutter, once. Not a major problem.With v21 firmware, it now stutters every few seconds when recording video (and the stutters are permanently in the resulting file during playback)... Which makes the video camera totally useless for me. Not great as I have a young baby daughter who I've been filming a lot with my phone, and she's not going to be young for long.Can anyone else recreate this problem?

Video stuttering on FW: 30.009
Hope they release the next firmware soon
N8 FW: 022.014 -- Please separate Artist & Albums!
N86 8MP FW: 30.009 -- We need a new FW on this phone!
E51 FW: 410.34.001
E70 FW: 2.0618.07.10 -- Why no v3 for my code?

Similar Messages

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.

The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20) into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
Thank you again for your help and wisdom.

N86 8mp video stabilization (bug??)

Dear all,
I recently discoverd that when I'm recording a video on my Nokia n86 with the video stabilization on, that something weird happens.
When I make quick movements to the left and right, while recording, the image is getting deformed. As if the image is ''waving''. Without video stabilization, the image is doesnt wave.
My question: is this a known problem? Does anybody experience the same effect or is my phone flipping?
(ps: just move the phone to the left and right, not up, down, side etc.)
Rustig

Video stuttering on FW: 30.009
Hope they release the next firmware soon
N8 FW: 022.014 -- Please separate Artist & Albums!
N86 8MP FW: 30.009 -- We need a new FW on this phone!
E51 FW: 410.34.001
E70 FW: 2.0618.07.10 -- Why no v3 for my code?

N86 8MP Video Auto Rotate?

When I use Video Mode on my N86 8MP, the image rotates as the camera does, so if I change from horizontal (landscape) orientation to vertical (portrait) orientation, the video ends up being sideways. Is there a setting so when I change the orientation of the camera all I change is capture area?
In Still Image mode you can turn Auto-Rotate On and Off, bt I can't seem to find this setting in Video Mode.

Noel,
Not sure if this is an iphone app problem as my Note 2 auto rotates np at all.
sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

3G video call after the new firmware pr 1.2?

In the contacts sittings it has an option says Display video calling option) , yet I dont see this option while tapping on any contact!!!
does anybody know how to 3G video call in my n900?
I dont either have a video call option in my skype contacts!
Solved!
Go to Solution.

We all want that feature for video calls over 3g network on our N900 in next firmware update..please nokia we all begging from you..PLEASE,PLEASE PLEASE
p/s: the reason is because most of our network service provider is compatible with this feature even its provide with free package for video calling over 3G network..that the reason why we all realy need that function are available with our N900.come on NOKIA it just a software/firmware tweak on this device because you already provide this front VGA camera.if is not maybe we all can accept it...

Connect problem with DV video-camera through the new thunderbolt to firewire adapter?

Hi
I got a JVC DV camcorder with firewire 400 output and I've got a Macbook Air 2012 with 8gb 1600 MHz DDR3, intel i7 2GHz, 256 ssd harddisk and intel HD graphics 4000 512 mb. It has thundebolt but no firewire port.
I wanted to connect these two item and then bought the new "thunderbolt to firewire 800" and the "800 to 400 firewire adapter cable".
I then connect both cables to each other and pluged it in to the JVC DV. I started up iMovie and pressed play on the camcorder, but the signal can't get through and the Macbook Air does not find the camcorder at all? What have I done wrong? Please help..
Best regards,
Jonowitz

Hi,
have you managed to solve your problem? I deal with the same issue using Panasonic MX500 DV camera. Any help would be appriciated.
Martin

I cant activate the camera/video camera on my new IMac

Facetime and PhotoBooth wont launch...Camera/VideoCamera doesn't appear to be there.
This is one of the brand new late 2013 IMacs
Any suggestions?

I think one of the most important things is to first go up to your black Apple upper right and hit software update. make sure you get your new computer up to date on all the software. After that restart your computer and then all your software should launch properly. I have one and everything works perfectly.

Why since installing newer firmware the camera and video are missing features and pictures suck?

Since installing newer firmware you can no longer set the resolution for and pictures suck. Also can not zoom in on video. How can I go backwards with the firware?

Welcme to the Supprt Frums!
Check and see what OS you have. Go to your STATUS icon > then ABOUT > on the third line down it should tell you 4.x.x.xx I think you will need the 4.5 OS . (operating system)
Also here is the ATT link to help you with upgrading if you need to.
https://www.blackberry.com/Downloads/entry.do?code=577BCC914F9E55D5E4E4F82F9F00E7D4
Nurse-Berry
Follow NurseBerry08 on Twitter

What is best type of 'new' video camera to buy for editing with PE 10?

I currently own two Sony miniDV camcorders (models DCR-HC28 and HC40) and was doing fine in Premiere Elements and recently upgraded to version 10. I was in the process of using the HC40 cam as a 'pass-through' device to digitize some old VHS tapes, and it worked well for copying from VHS to miniDV tape. Then, I could capture in Premiere Elements and edit, etc. (It would never work to pass all the way through to capture in PE in one step using Firewire). Now, the HC40 camera has locked up on me halfway through my box of VHS tapes, and is stuck showing the Time/Date screen and the touch screen seems to be disabled. What to do?
There do exist plenty of used DCR-HC40 and 52s (which also support pass-through) on Amazon for sale in the $200 range, and that is one option. I also went to Best Buys this week and looked at all the new Sony video cameras, and they fell into basically two series: the DCR-SX series, which record in standard definition onto flash memory (SD cards), and the more expensive HDR-CX series, which record in Hi Definition (also on SD cards) but also, I was told, can record in standard definition. The miniDV camcorders are no more, apparently. I am not so enamored of HD recording that I would go whole hog for it, as I am happy with the results I have been getting with my miniDV cameras once burned to DVD or converted to MPEG or MP4 for playing on my iPhone, etc. Plus, HD takes up so much more memory and space on the hard drive compared to standard def files.
I called Sony tech services today to find out that none of the new cameras support the pass-through function for digitizing from old VHS cassettes, so I am looking at buying a VHS-digitizing device as recommended here on the forum such as the ADS Pyro AV Link or Grass Valley ADVC110. Since I would rather spend that money on a new video camera instead of merely the AV link device which I will have no use for once the tapes are digitized, my question comes back to the cameras. Which of the new cameras will be most ideal for editing in PE10 going forward, or is it best to stick with miniDV for now?
Steve G has always seemed to point out that miniDV tape and the ensuing AVI files are the best for PE to work with. Sony told me today that even the SD cameras such as the DCR-SX65SD ($219) now record onto the SD cards in MPEG2 format, and that AVI is a thing of the past that died with the miniDV tapes. I assume MPEG2 still comes out as different clips that one assembles on the Timeline in PE10? One probably could convert the MPEG2 files to AVI, but would that give the same quality as an original AVI file from a miniDV tape? And if MPEG2 is the new standard going forward, do the resulting videos made with PE10 have the same quality as those made from 'native' AVI files? I will buy a used DCR-HC40 miniDV camera if the end result is better than those to be obtained with the brand new DCR or HDR series cameras now available in stores. But if the quality is the same, I could perhaps opt for one such as the HDR-CX 130HD ($349) which also records in SD in case some years from now I decide I really DO want to switch to HD formats.
Any advice on choice/use of the newer cameras and their default formats such as MPEG2 is welcome, in relation to PE10 editing and output capabilities.
Thanks very much,   paultool3

Dear JM and Steve,
Thanks much for your replies. I plan to get my DCR-HC40 miniDV camera fixed so I can use it for pass-through digitizing from VHS tapes. I also recently bought one of the Dazzle Video Creator Platinum capture units ($84 at Best Buys) just to try it, and actually got pretty good results in digitizing a VHS-C tape using a VHS-C to VHS adapter unit to play it in our VCR, and then using the Pinnacle Studio HD (version 15) that came with the Dazzle unit to import and digitize through the Dazzle unit.
The Dazzle unit would not show up in Premiere Elements 10 as an option to capture from, but did in Pinnacle Studio 15.   I used our Sony VAIO with i7 processor and Pinnacle captured the one hour, twenty-five minute- long VHS-C tape to a single 18GB .AVI clip which I then was able to bring into Premiere Elements 10 and use for output in various formats.
When using a less powerful laptop initially, the digitizing failed, with 319 dropped frames in the first 5 minutes.. So it takes a more powerful computer to work with a capture unit like Dazzle, apparently.
I will eventually be shopping around for a new, AVCHD format video camera as well based on your recommendations, but the current group of Sonys in this category, such as the HDR-CX130HD ($349) which record video onto SD cards, are getting bad reviews from CNET, claiming they have poor quality HD and other issues. So for the forseeable future I will be sticking with miniDV using my Sony DCR-HC28 and HC40 camcorders.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

N86 8MP v10.086 firmware not updating to v20 & v21

Hi All,
I had buy a Nokia N86 8MP on 3rd Feb'2010 from a reputed mobile store in bhubaneswar,Orissa,India
The firmware version installed is ''v10.086''
As per nokia ''v20''& ''v21.006'' is released.
So I go for an update via NSU and via AIR, but its showing your firmware is upto date and no update is there for v10.086 where as v20 and v21 is already released.
My phone is also not associated with brand such as Orange,Vodafone,T-mobile etc.
Also I have buy from a certified mobile shop.
I have also gone through Nokia.co.in site, its says to enter the code of the mobile which is below the battery,I also go for that and same result comes out v10.086 is latest for the code.
I can also give my code if somebody ask for it
Is there is no update for my mobile?
Is face detection I can't avail?
As per nokia v20 & v21 is already released but why not for my N86?
Most importantly Is in future whether I can avail this updates or not?
Please help me out for which I ll be grateful to you neither my 20k bucks will be simply wasted.
I am awating for the reply..
If somebody send a mail to me regarding this problem mentioned , I ll be the most happier person in the world.
my mail id: ************
Thanks & Regards
Amit Dash.
All IZZ Well..

I switched on the Mobile and what?
It's already came with FW v20.115
N86 8MP v30.009
The world became a better place on July 8, 1979...

Creative Vado HD Pocket Video Cam Firmware v1180 released!

Hi everyone,
There is a new firmware release available in the download section.
Creative Vado HD Pocket Video Cam Firmware v80
Release date : 2 Jan 09
File Name : VADOHD_PCFW_US_80.exe div class="DownloadDate">[b]This download contains an improved version of the firmware found on your Creative Vado HD Pocket Video Cam. It improves user experience when videos from your Vado HD are viewed on your television. For more details, read the rest of this web release note.
Added Features or Enhancements:
Improves user experience when videos from your Vado HD are viewed on your television.
Requirements:
Microsoft® Windows Vista®, Windows® XP (Service Pack 2)
USB Port
Creative Vado HD Pocket Video Cam
Notes:
To install this firmware
Download the VADOHD_PCFW_US_80.exe file into your local hard disk.
Double-click the downloaded file and follow the instructions on the screen.
div class="DownloadDate"> span class="DownloadSizeBox">

Re: Response: Creative Vado HD Pocket Video Cam Software v2.00.09 Released!}Hello Stubee,
Not that we don't allow responses to the post but my post above is intended as an announcement just like what we usually do with other web releases on the the other forums.
Here are the answers to your questions:
.) Does it upgrade the VadoCentral software on the Vado unit's
Answer: No it doesn't. It will just replace the software on the unit with the same version.
2.) Does it install the VadoCentral software on our PC?
Answer: No it does not.
3.) Or....is it just to reinstall the same version VadoCentral software for those that had it suddenly disappear from their Vados?
Answer: Yes. This is made available for cases where the software suddenly disappears from their Vados.

I've been using a flip video camera since 2009 and all of my videos are in the flipshare library. What is the best way to burn all these videos to a DVD that will play on my DVD player/tv?

I've been using a flip video camera since 2009 and all of my videos are in the flipshare library. What is the best way to burn all these videos to a DVD that will play on my DVD player/tv? The flipshare library is taking up too much space on my Macbook and I wanted to delete these videos once they were all tranferred to DVDs.
Any help is greatly appreciated.

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

Gurus: please help me choose my new HD Video camera

Esteemed Video Gurus:
Currently I am an intermediate level Adobe Premiere Pro user. As my video editing projects grow more complex and my skills grow, my 8-year-old SD Video camera is just not acceptable anymore.
I would like to upgrade to my first HD Video Camera. Can anyone suggest a camera based on my needs?
*I need professional grade "starter” HD Video camera (<= $800 dollars)
* I prefer extra features that I may need as more proficient in the Adobe Creative Suite applications.
*I was a professional photographer (when they used film) so I prefer to have manual control to focus, set exposure, use spot metering, and other settings that are adjustable, rather that auto.
*I primarily shoot inside "green screen" studio videos of subjects using a tripod and lighting. However, I also would like a camera that I can take with me anywhere, that would quickly stat for spur of the moment videos in public.
*I would want enough storage to shoot 2-4 hours of HD video.
*I know that I would like to have a long battery life.
*An Image Stabilizer is important to me.
*I would like to be able to burn blue ray in the future.
*again I can afford a camera (<= $800 dollars)
Thanks for your time. Any advice is appreciated.
Respectfully
Bryan Edmondson

[Moved to the Lounge.]
You're asking a lot for $800.
As you were a photographer, and might still have lenses around, you could look into the Panasonic GH2. New, they went for around $600 to $700 for the body. But there is a new model out which now runs about $1,200 for the body, so you may have to look into a used one if you don't want to up the price.
The genius of the GH2 is that some Russian figured out how to hack the firmware and adjust things inside the camera. As a result, and with the right hack, I'd argue that the GH2 can produce an image equal and most often superior to any other camera costing less than $5,000. (And even for cameras costing more, it can sometimes hold its own.)
So, with the GH2 you have "Professional" grade. (The following film was shot with the GH2. http://movies.netflix.com/WiMovie/Upstream_Color/70265224) You have your manual controls, small enough to take anywhere, OIS available on many lenses, and it produces an excellent Blu-ray image.
The down sides are that the improved image quality definitely eats up storage space. With what I consider the current best patch, you're looking at maybe two hours recording on a 128 GB card. However, there are many patches available and quite a few will allow you to reach the desired 4 hour length with image quality still vastly improved over the original. The other down side is battery life. You'll need more than one for a full day. You might get 2 to 3 hours out of a battery, so travel with several.
In your price range, I think that is definitely your best option. You won't get a better image at that price. Although you might be able to beat it for a little bit more when the $1,000 Blackmagic Pocket Cinema Camera comes out in July, though it will likely have it's own issues that may not work for you. (You'll be hard pressed to get an hour of recording on a 128GB card at best quality.)

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media.

N86 8MP video camera useless since new firmware (2...

Similar Messages

Maybe you are looking for