N86 bluetooth connection to HP 8350w elite book la...

I am unable to connect n86 to HP 8350w elite book laptop. Windows vista (64) keeps asking for device driver, Have tried downloading appropriate *.inf files from Nokia, they do not run/install, just open as*.txt files. Vista does not find them.
How do I get my n86 to talk to my laptop via bluetooth?

HI @roshanbysh ,
Welcome to the HP forum!
To get your issue more exposure I would suggest posting it in the commercial forums since the Elitebook 840 G1 is a commercial product. You can do this at:
Notebook - HP ProBook, ZBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime: HP EliteBook 840 G1 Notebook PC..
I hope this helps!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

N86 & bluetooth connection to Audi Car

I can successfully connect n86 to car and use phone to talk etc. However, when n86 connected to car bluetooth, I loose nokia maps voice instructions. Is there a way to have phone connected to car and be able to hear maps navigational voice through car bluetooth as well?

I have a 2006 A8 and had similar problems until I loaded the last iPhone update; Bluetooth is now rock-solid. Check with your dealer and make sure your car has the latest Audi updates. On my car, Bluetooth settings have a delay setting. Make sure that is turned on.

Elite Book 8540w does not recognize GPS receiver in Connection Manager

The Connection Manager in my Elite Book 8540w does (no longer) recognize the GPS receiver. What could cause this behavior?
I have the latest version of the Communication Manager as well as HP Software Framework 4.5.12.1 installed.

Mac,
Forced Power Reset does not work for everything -- it resets the Drivers as described in the document provided. Your assessment that the Reset "kind of ridiculous" is perhaps based on your current experience; your conclusion that the Reset cannot help you in this instance is entirely correct.
My apologies -- I believe that I lack the expertise necessary to help you with this issue.
Perhaps another Expert or forum member will have an answer -- there is a wealth of experience on the forum and maybe someone has a fix to share.
I hope you find a resolution or workaround.
Kind Regards,
Dragon-Fur

Bluetooth connection with Mac Book Pro

How do I set up a Bluetooth connection with my Mac Book Pro?

I'm trying to set up the Blue Tooth connection so I can use internet tethering from my iPhone to my MacBook Pro. I have already set up the USB option and that works well on my Rogers network. I've achieved Bluetooth paring between the iPhone and MacBook, but I can't get them to connect.
I'm using Snow Leopard, if that makes any difference.
Any ideas?

Bluetooth connection between Mac book pro and IPad

Hello,
i am having trouble creating a Bluetooth connection between a Mac book pro running Mac OS X 10.6.8 and a IPad air 2 iOS 8.1.2.
I have managed to pair the devices but when I try to create a connection to transfer data an error message on the Mac comes up saying "Bluetooth network unavailable, make sure device is on, in range and set up properly", similarly if a connection is tried from the iPad an error message comes up saying "make sure the device is on".
Both devices Bluetooth is on and discoverable and i have managed to pair them but can't create a actual connection!
Any help / ideas appreciated?
Best regards

Bluetooth paring for file transfer is not supported on iPads.
You can use Airdrop if both devices support it, or a 3rd party App, but you cannot directly pair an iPad to a Macbook and transfer a file over the bluetooth connection.

Address Book bluetooth connection to phone disconnects after idle time?

Address Book 4.0.3 (483)
Nokia 6680
I think receiving pop-up alerts of incoming calls on your Mac screen is pretty cool and a nice thing to have as and when required.
But in order for this to work, the bluetooth connection between Address Book and the phone needs to be active.
Unfortunately, it seems this connection becomes inactive after a certain amount of inactivity (?), and needs to be activated again with the bluetooth button. How can I keep this connection alive as long as I require it, without having to constantly use it, or keep pressing the bluetooth button?
Thanks in advance.

I have to turn Bluetooth off, then back on & turn keyboard off then back on & it works now without having to restart the computer. I did disable the box for allowing Bluetooth devices to wake the computer since my mouse isn't Bluetooth.

HTC Incredible dropping Bluetooth connections with 2012 Honda CRV

I have issues connecting an HTC Incredible 4G to a 2012 Honda CRV. The text message display / read back while in motion feature worked until last night. Now the vehicle displays "updating" and cannot display or read back text messages. The second issue is the phone book display on the Honda only shows some entries and not all that are in the phone. All show in Backup Assistant Plus. I am not happy with this situation and VZW phone tech support is stumped too!
Edited to start new discussion.
Message was edited by: Admin Moderator

Thank you all for posting your questions and concerns!
I can imagine how frustrating it gets when experiencing the Bluetooth connection problems! Just want to let everyone know our Product and Bluetooth Team are aware of the issues with connectivity since software update, and are working diligently to provide a permanent fix as soon as possible.
We will keep you updated!
Thanks for your patience, and for choosing Verizon Wireless!

Problems with bluetooth connection to wireless mouse and keyboard

I am using a mac book (aluminium) with 10.6.4 with a Cinema Display and a wireless keyboard and mouse. My time capsule is located only 1 meter away from the mac book and every time the automatic sync starts my mouse and keyboard do not repsond anymore. It seems that the bluetooth connection is somehow heavily loaded due to the network traffic. I have updated all devices and restarted the computer several times. It always keeps on doing that. Any help?

philip_axmann wrote:
every time the automatic sync starts my mouse and keyboard do not repsond anymore.
what you are seeing is called _*wireless interference*_.
change the channel your TC broadcasts on.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

PC/Bluetooth connectivity issue

I'm using Vista 64 and my laptop supports bluetooth connectivity. After enabling bloototh on the iphone and having the PC look for the device it prompted me to enter a PIN number on the iPhone and then now it sees it. However, although the computer and iPhone see each other they refuse to connect to each other. Vista prompts me to find a driver for the iPhone but I cannot find such a thing anywhere. Any Ideas?
Here is a direct link to some screenshots of what I am talking about
http://i237.photobucket.com/albums/ff95/wirelessfender/IphoneBluetooth.jpg
http://i237.photobucket.com/albums/ff95/wirelessfender/dddddd.jpg
http://i237.photobucket.com/albums/ff95/wirelessfender/ddd.jpg
Thank you
Anthony
Message was edited by: Foocoustic
Message was edited by: Foocoustic

iPhone Bluetooth supports the following profiles and functions:
HFP 1.5 - Hands Free Profile- for phone headsets and car units.
PBAP - Phone Book Access Profile - for sending phone book numbers to handsfree units.
A2DP - Advanced Audio Distribution Profile - for music stereo headsets (3G & 3GS only)
AVRCP - Audio Video Remote Oontrol profile - for stereo headset remote control of iPod functions, limited to play/pause/stop (3G & 3GS only)
PANP - Personal Area Network Profile - for tethering. (3G & 3GS only)
*FTP - File Transfer Profile - is not supported.*
http://support.apple.com/kb/HT3647
Message was edited by: modular747

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

Lenovo A1-07 Ideapad Tablet Bluetooth connection

I am trying to connect my Lenovo A1-07 Ideapad Tablet to a Nokia 5230 phone using the bluetooth connection. Whilst I get the devices to pair they will not connect. Does anybody have any suggestions?

Hello, my lenovo ideapad a1 woudn't charge unless you plug the charger in really hard and hold it there. That is when the light comes on. I left it off but still it doesn't charge. Any help?

Nokia C5-03/Win7 Bluetooth connectivity problem

When I am trying to connect Nokia Ovi Suite to my phone using Bluetooth, the pairing process seems to succeed, except the last phase: Then I receive a message that the connection did not succeed. The wizard gives then a possibility to try again with a different ID but it fails every time.
It is the same problem if I try to pair the phone from computer's Bluetooth icon in the notification area. However, with using my laptop with XP this succeeds. Therefore I believe that my phone is OK but there is something wrong with my Bluetooth software in Win 7 computer. Nokia Ovi Suite lists it:
- Microsoft (Version: 6.1.7600, subversion: 16385)
When I start the computer, the Event Viewer shows the following error:
"The Bluetooth driver expected an HCI event with a certain size but did not receive it."
Source: BTHUSB
EventID: 5
The Microsoft's "Event Log Online Help" onthat window does not suggest anything.
However, this may be the actual reason for the problems but I do not know how to fix it.
I have tried Microsoft's "Fix it" tool but it did not fix this problem.
Any ideas what to do?

Still the same problem.
Now I installed the Nokia PC Suite and I tried to make a bluetooth connection to it.
Everything goes again well except after the last phase when I give the asked pin number in my phone, the computer ponders a while and shows then a window with the text that the phone cannot be verified.

How do I connect my Centro to the Internet via bluetooth over PC's Internet? Where is Centro's PPP Connection Type? How do I setup Login Script for bluetooth connection?

I am trying to set up bluetooth on the Centro to connect to the internet via my PC's internet.
HotSync over bluetooth works successfully.
Computer specs: Toshiba P205-S6277; Bluetooth Stack v5.10.04 (currently using); Bluetooth Monitor v3.01 (to use Vista's built-in bluetooth)
I think I have narrowed my problem down to 3 things.
(1) Finding Network Access properties (to allow connected devices to access the internet)
(2) Finding Centro's Network Connection Type: PPP
(3) Finding the correct Login Script to use
for (1) I think I've looked everywhere; found nothing on Network Access.
Checked control panel: only Bluetooth Local COM
Right-clicked bluetooth icon > Settings: File transfer, PAN Networking, PAN DHCP server, AV controls. Other bluetooth settings are for file transfer or object push. I don't see anything like this.
I'm stumped on (2). It seems as if palm removed this option under Centro's Advanced network settings .
Nearly all the forums that I read says to choose Connection Type: PPP.
(3) Found 2 scripts that seemed would work. I don't know how it exactly works but it sounds workable.
First script:
Send: CLIENT
Send: CLIENT
Wait for: CLIENTSERVER
End:
Script 1 Connect Log:
=======================================
Connect Log
S: client
S: client
R:
Err: 0x121F <<<netErrUserCancel b/c I canceled it.
Not connected
========================================
I canceled it because the process would stay on "Signing In" then it automatically "Canceled" itself.
Second script:
Send CR:
Delay: 1
Send: CLIENT
Wait For: CLIENTSERVER
End
**UPDATE** I found on this forum (Reply # 3689) that the script is needed only if you are using Palm OS 4 or under. Centro uses Palm OS 5.49121. Can anyone support this?
Even without the script it has problems "Signing In".
I'm currently reading this site and trying out its decribed methods. I will update this thread when I get the results.
I'm using the Centro. And If anyone's been able to successfully connect to the internet on the Centro via a bluetooth connection to the PC WITHOUT 3rd party applications, please share. If not, please share any ideas.
Thanks!
-Eric
Post relates to: Centro (AT&T)
Message Edited by naisanza on 01-01-2009 02:26 PM

I've been going at this for days, and have probably exhausted all the proposed solutions on the first 3 pages of various google searches. I'm getting the feeling that Vista users are pretty much SOL for the time being.
For the record, I just tried out a few of the solutions (mRouter & SoftickPPP) on XP and they work perfectly.
Post relates to: Centro (Verizon)
Message Edited by Cogwheel on 02-13-2009 09:45 AM

I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

Hi
I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
Thanks for your input
Felix013

try a RESET ALL SETTINGS

N86 bluetooth connection to HP 8350w elite book la...

Similar Messages

Maybe you are looking for