N86: charging using external usb battery

Hi all,
I was wondering if anyone found a solution for charging the N86 using an external USB battery. I have two such batteries and my N86 refuses to charge from either of them. One of them works flawlessly with the iPhone so I know it's supplying at least 1000mA.
I was wondering if we need a special USB cable other than the one supplied by Nokia.
Any pointers would be appreciated.

USB charging is a lower voltage charge but I think you should still unplug the player after it's been fully charged. While tranferring tracks or organizing the music it won't really make a difference. I know that a couple nights ago I charged a player over night (Meaning it was plugged in for like 5 hours with a full charge) and the battery's charge seemed to drain a little more quickly. I know this is highly anecdotal but just some thoughts.
I don't see the need to rate the music on the player (most of my music is ripped straight from CD so it's all pretty good) and for what most people use a Mass Storage Device for personal files or maybe a few movies and 2 gigs is more than enough.

Similar Messages

Notebook hangs if there's an app actively using external USB disk

...right before going into sleep mode.
I have this notebook and an external USB SATA drive hooked up to it. When I put the laptop into sleep mode, then resume its work, after a while I'll get a blank screen that essentially looks a lot like tty1, all black background and gray symbols all over the screen. Essentially, the message I get is the following:
Dec 7 11:29:18 localhost kernel: [67351.155834] ESI: f6447e80 EDI: f46b05f0 EBP: f15a7e58 ESP: f15a7e40
Dec 7 11:29:18 localhost kernel: [67351.155834] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Dec 7 11:29:18 localhost kernel: [67351.155834] Process transmission-gt (pid: 2302, ti=f15a6000 task=f1255a40 task.ti=f15a6000)
Dec 7 11:29:18 localhost kernel: [67351.155834] Stack:
Dec 7 11:29:18 localhost kernel: [67351.155834] f15a7eac f46b05e0 f6447e80 f1255a40 f6447e80 f46b05f0 f15a7e6c c10d4f48
Dec 7 11:29:18 localhost kernel: [67351.155834] 00000010 f6447e80 f46b05e0 f15a7e84 c113be2c 00000000 efa3b930 ef1f4400
Dec 7 11:29:18 localhost kernel: [67351.155834] 00000000 f15a7e90 c113befa f1141600 f15a7eb4 f8046f1e f1141600 f804b3e4
Dec 7 11:29:18 localhost kernel: [67351.155834] Call Trace:
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c10d4f48>] account_page_dirtied+0x68/0x90
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c113be2c>] __set_page_dirty+0x3c/0xb0
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c113befa>] mark_buffer_dirty+0x5a/0x90
Dec 7 11:29:18 localhost kernel: [67351.155834] [<f8046f1e>] ext2_sync_super+0x6e/0xd0 [ext2]
Dec 7 11:29:18 localhost kernel: [67351.155834] [<f8046fd1>] ext2_sync_fs+0x51/0x60 [ext2]
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1157640>] ? dquot_get_dqblk+0x180/0x180
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c113a4ca>] __sync_filesystem+0x5a/0x80
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c113a539>] sync_filesystem+0x29/0x50
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c111656e>] generic_shutdown_super+0x2e/0xe0
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1116649>] kill_block_super+0x29/0x70
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c111693d>] deactivate_locked_super+0x3d/0x60
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c11171f7>] deactivate_super+0x47/0x60
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c112ecd7>] mntput_no_expire+0x87/0xd0
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c112ed38>] mntput+0x18/0x30
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1116154>] fput+0x134/0x1e0
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1112d14>] filp_close+0x54/0x80
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1112db4>] sys_close+0x74/0xc0
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c134c11f>] sysenter_do_call+0x12/0x28
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1340000>] ? setup_local_APIC+0x2c9/0x3b8
Dec 7 11:29:18 localhost kernel: [67351.155834] Code: eb ce 8d 76 00 8d bc 27 00 00 00 00 55 89 e5 83 ec 18 89 5d f4 89 c3 89 e0 25 00 e0 ff ff 89 75 f8 89 7d fc 83 40 14 01 8b 43 14
Dec 7 11:29:18 localhost [67351.155834] 8b 30 89 f7 c1 ff 1f 01 d6 89 45 f0 8b 45 08 11 cf 89 c2 c1
Dec 7 11:29:18 localhost kernel: [67351.155834] EIP: [<c11cf02f>] __percpu_counter_add+0x1f/0xe0 SS:ESP 0068:f15a7e40
Dec 7 11:29:18 localhost kernel: [67351.155834] CR2: 00000000342da000
Dec 7 11:29:18 localhost kernel: [67351.155834] ---[ end trace a7afafe94ef537f4 ]---
Dec 7 11:29:18 localhost kernel: [67351.182781] note: transmission-gt[2302] exited with preempt_count 2
By playing around I learned that if I kill transmission and any app that actively uses the USB disk prior to the sleep mode, and then start them after resume is finished and the disk is mounted (I use GNOME 3 in fallback mode, so it automounts the disk) everything works fine.
Now, I could ignore those messages but it gets worse. Mostly laptop will hang at a random point in time after printing that wall of text on tty1. It might take hours, or even days before this happens. Sometimes I'll find transmission in a freezed state and I may survive a couple of sleep and resume cycles but I almost never will go as far as 4 days and more in a row. The laptop will hang eventually. And the only way to avoid this is to kill off apps that use external USB drive prior to going into sleep mode.
Any ideas what's going on and how to fix this?
% uname -a
Linux host 2.6.39-ARCH #1 SMP PREEMPT Tue Jun 7 05:49:02 UTC 2011 i686 Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz GenuineIntel GNU/Linux

karol wrote:https://bbs.archlinux.org/viewtopic.php?id=131527
Thanks, however, my problem isn't speed, it's stability of the system.

Can n86 charge using usb cable connected to power ...

I know that nokia n86 is chargeable via usb cable connected to the computer/laptop. However, I don't always have a laptop or computer with me while I'm travelling so I was wondering, is it possible to charge my n86 using a usb cable connected to a power socket using a usb adapter like those used to charge mp3 players if I didn't bring the charger with me? will it spoil the phone?
Thanks in advance.

should work fine as long as it is an official USB device. I have a Nokia USB charger and that is rated at 5V/1200mA and I have used a 3rd party USB charger and that has worked also. As I understand it you need something with at least 5V/500mA. I think my 3rd party one was about 600mA

[SOLVED] Kernel panic when using external USB hard drive

I have a desktop PC with a 64 bit arch install, on a Core2 Duo 6320 CPU. I have been using (and continue using right now) a 500 GB "Iomega Desktop Hard Drive" external USB hard disk without problems. But I have just bought a 3 TB "Seagate Expansion" external USB hard drive and I'm unable to use it from my Arch install. Each time I try to format it or to copy data from the PC, Arch freezes with a kernel panic. Sometimes it freezes faster and I cannot see anything, but others I am able to see the following kernel messages, repeating several times:
[11701.205071] sd 3:0:0:0: [sdf] uas_eh_abort_handler ffff880014e13380 tag 29, inflight: CMD
[11701.221297] sd 3:0:0:0: [sdf] abort completed
[11701.221313] scsi host3: uas_eh_task_mgmt: ABORT TASK failed (wrong tag 0/256)
[11701.221323] sd 3:0:0:0: [sdf] uas_eh_abort_handler ffff880014e13500 tag 30, inflight: CMD
[11701.237550] sd 3:0:0:0: [sdf] abort completed
[11701.237567] scsi host3: uas_eh_task_mgmt: ABORT TASK failed (wrong tag 0/256)
[11701.237576] sd 3:0:0:0: [sdf] uas_eh_abort_handler ffff880014e13680 tag 31, inflight: CMD
[11701.253922] sd 3:0:0:0: [sdf] abort completed
[11701.253936] scsi host3: uas_eh_task_mgmt: ABORT TASK failed (wrong tag 0/256)
[11701.253956] sd 3:0:0:0: uas_eh_device_reset_handler
[11704.252182] scsi host3: uas_eh_task_mgmt: LOGICAL UNIT RESET timed out
[11704.252196] scsi host3: uas_eh_bus_reset_handler start
[11704.252443] usb 5-6: stat urb: killed, stream 0
[11704.358882] usb 5-6: reset high-speed USB device number 3 using ehci-pci
[11704.483206] scsi host3: uas_eh_bus_reset_handler success
Strange enough, the drive is listed by lsusb command as a 2TB but I don't think this is related to the problem (as the OS sees the 3 TB). This is the lsusb output:
Bus 001 Device 003: ID 0bc2:3312 Seagate RSS LLC SRD00F2 [Expansion Desktop Drive 2TB]
I have tried the drive on other PCs and it works flawlessly. Also tried booting Windows 8 on the same PC I have Arch installed in, and in Windows it also works perfect. I have tried using ext2 and NTFS filesystems. Tried also changing the USB cable without success. And right now I'm out of ideas. Any suggestions?
Last edited by doragasu (2014-07-03 11:06:25)

looks like it could be the UAS module , check https://bbs.archlinux.org/viewtopic.php?id=183190

After updating to iOS7, i can't play youtube songs while the phone is charging using car usb adapter

I have a iphone 4S and updated to iOS7. After update i am not able to play songs in my car using youtube when the phone was plugged into usb power. The way i play youtube songs (that's how i listen to songs in the car) from my iphone is, i have AUX cable that connects the iphone to AUX port in my car music system. When the phone is put into chaging mode using the USB cable in my car, it start assuming i am connected to apple TV and everything goes blank. If taken out of charging it works as expected.
Now how it worked befoe iOS7? Before everytime i put the phone into charging in the car in-built USB port, after a few minutes a message pops up in the phone "This accessory is not supported ..." I press "OK" and after that playing songs from youtube is business as usual. If i connect the AUX cable before i see this pops up message and start playing songs, it assumes connecting to apple tv and songs would never play.
With iOS7, i waited 2 hours and still have not seen the pop up message "This accessory is not supported ..." and playing using AUX cable all the aasuming connected to apple TV. Can some one please help to resolve the issue ??
Thanks.

wooh-ho ! I have upgraded iOS 7.0.3 yesteray, plugged the device to my car USB charger while going home from work... guess what to my surprise it popped up the message "This accessory is not supported ..." in a few minutes exactly as it used to be before iOS7. However i did not play any online music since connection was poort is disrupted in my area yesterday. I am sure it will play music while on charge. Many thanks to apple engineering team. They definitely read the forum and picked my issue to address. Great job. Kudos !
I was almost thought of dropping the phone since it became useless in the car i drive. Now maybe i will upgrade to 5S in couple weeks!

Two simultaneous sound outputs by using external USB sound card

Hi
I have a MacBook Pro running Mac OS X 10.4.1
I've also bought a Griffin iMic as my second sound card.
Mac OS X shows my internal sound card as well as the external USB one and I can
easily switch between them. I was wondering if there is a way of using both at the same time, say, the internal speakers play song X and the headphone connected to iMic play sound Y.
Do I need a special software for this ?
Is iTunes capable of doing this ?
Any input is appreciated.
thanks
Ahoora

hi i just like to say i had a similar fault though i would be surprised if it causing yours,but you never know,my fault was my laptop lid, [9 months old] it contains the mic ,and when the lid was in a certain angle crackles could be heard worse when i had my external sound card in, it was a faulty membrane [ lid to body] easily missed by engineer because it was the same angle all the time it happened,good luck, PS you English is very good
Message was edited by: sido1

Transfering iTunes files to new computer using external USB hard drive

Thought this could be useful:
If you want to transfer your complete iTunes library to a new computer preserving all your playlists and library information, but without using your iPod as a hard dive, or without burning a CD or DVD, you can do it by using an USB external hard drive following these easy steps:
1) Quit iTunes
2) Connect your USB external hard drive to your computer and acccess it thru My PC or Windows Explorer.
3) Create two new folders in your external hard drive (you can name them LIBRARY Backup and PLAYLISTS Backup).
4) Open the LIBRARY Backup folder.
5) Open another Windows Explorer or My PC window; open the iTunes Music folder (usually located in C:\Documents and Settings\Owner\My documents\My music\iTunes).
6) Copy all of its contents (only the contents, not the whole folder) to the LIBRARY Backup folder you created in your external USB Hard Drive.
7) Close both the LIBRARY Backup folder from your USB external hard drive and the iTunes Music folder.
8) Open the PLAYLISTS Backup folder from your USB external hard drive
9) From your iTunes folder, copy the iTunes Music Library.xml to the PLAYLISTS Backup folder.
10) Close all the windows and extract your USB external hard drive from your PC ()
11) Install iTunes in your new computer.
12) Using Windows Explorer open the iTunes Music folder (usually located in C:\Documents and Settings\Owner\My documents\My music\iTunes).
13) Connect the USB hard drive to your new computer and open it using another Windows Explorer window.
14) Open the LIBRARY Backup folder and copy all of its contents (only the contents, not the whole folder) to the iTunes Music folder in your new computer. After the copying is complete, close this folder.
15) Copy the PLAYLISTS Backup folder to you new computer’s desktop.
16) Close Windows Explorer and extract USB hard drive.
17) Open iTunes
18) From the File menu, choose Import. Navigate to the iTunes Music Library.xml file on the Desktop and click Choose. The imported playlist will show only songs located on the computer's hard disk or external media.
19) You can now delete the xml. file from your new computer’s desktop if you wish.
PC Windows XP Owner of 5th Generation iPod

Type "move itunes library" into the Google search bar.
Type "ipod touch not recognized by itunes" into the search bar at the top of this page by "Support"

Problems Installing Win7 using External, USB DVD Drive

I have a mid 2010 15" i7 MBP which I upgraded to from 4GB to 8GB RAM courtesy of OWC. I recently upgraded the 500GB 7200RPM HD with a 240GB OCZ Vertex 3 and using an OWC Data Doubler, I replaced the DVD SuperDrive with the 500GB Hard Drive.
I used an External USB DVD Drive to install OS X SL On the SSD without issues. Also, I got all my updates and software installed and working without any problems.
I've been running great for about 2 weeks now, so I decided to install Windows 7 64bit Ultimate. I ran Boot Camp Assistant and partitioned the 240GB SSD in half 120/120. Everything went fine with creating the partition. I selected to Install from the Win 7 DVD media in the USB DVD drive and rebooted. I got a grey screen. I turned the computer off and turned it back on. Holding down Option, I selected the Install DVD from the Boot Menu. I then got a screen with the Apple Logo flashing intermittently with a Circle/Cross Hatch. So I can't get the Windows Install to start to save my life. I know the External, USB DVD works since I used it to install OS X and I have no problems using it in OS X. I Know the media works because I tried a test install, without activation in a VMWare Fusion VM.
Any suggestions are appreciated?

So here is the answer. The Firmware on the MacBook Pro only supports installation of OS X from External Media and will not install operating systems from 3rd Parties. I tried to install Windows XP, Win7 Ultimate 32 & 64bit, and Ubuntu 11.04 but no success.
Supposedly, the MacBook Air does support installation of 3rd party operating systems from external media, but I have no way to confirm this.
I ended up reinstalling the internal DVD drive installing Win 7 and Ubuntu on the SSD. Using rEFI, I'm able to triple boot all 3 operating systems. Then removed the drive again and reinstalled the 2nd HD. Everything seems to be working fine.
I'm looking for someone who has experience in Mac EFI Hacking to see if there is a way to enable booting 3rd Party OSes from external media. I'm guessing someone could examine the MBA firmware and figure out how to hack that capability into the MBP.

12GB too Small- using external USB/HDD for game storage?

Hi,
Our old PS3 broke, we just bought a new one "Super slim". Our old PS3 had a Hard Drive with 60GB it was easy to instal 3 games and play them.
The new PS3 only has 12GB space. We installed 1 game and coulnd't even instal a second one because it didn't have enough space !
We tried to find answers on the internet on how to use a USB Stick as a storage device for the Game Data. However I couldn't find an answer.
We have it formatted on FAT32 however we can't seem to put Game Data on it.
If anyone knows how to use a USB Stick as storage device for Game Data please we need your help.
PS: I am not talking about Save Data (These files are 2MB) I am talking about the Game Data like 8GB each Game.

strangeplaice wrote:
Joey-mitchel wrote:
Are you sure an External Hard Drive wouldn't work ? I've seen some official Sony External Hard Drives for ps3. If an External Hard Drive does work on a PS3 could you explain how and also why a USB Stick doesn't work and an External Hard Drive would ? An external drive won't work because the transfer speed is simply too slow for game data to be usefully stored on it.
For example, using a USB drive I attempted to boot Windows XP. This took approximately 30 minutes, and then lagged unbelievably with even the most basic operations. When running a full blown game, this sort of speed of operation would be useless which is why it's not a feature. Hopefully that explains it a bit.I care to disagree, PS3 has USB 2.0 which has 60MB/s transfer speed, which is a bit more then most HDD can do. So in theory it would work but "Sony" has policy to do everything can don't want and don't do what they want. So the issues you had were propably due to something else.

Satellite A200: Cannot use external USB devices properly

I encountered a problem with my Toshiba notebook and i can't fix it and I am in need your help please..
The problem is that when i connect a USB portable device (external USB harddisk , iPod ,Flash memory ..etc) with more than 8GB of Memory..
It's not properly installed in device manager and appears under "universal serial bus controller ".
But it doesn't say that it's an unknown device. It appears normally with its name, but it's not properly installed (it doesn't say that either ) where it is supposed to be under a specific category (harddisk under "disk drives" , camera under "imaging devices " and so on )
And i can't use the device because the HDD doesn't appear in "My computer" and my iPod can't be used
I'd like to inform you that this problem is with all USB devices with more than 8GB of memory.
Not just one device. I tried many devices to make sure that it's not a problem with the device.
So it's a problem with my laptop and i installed Windows many times with no progress.
Thanks for your help in advance ..

Is it XP or Vista?
If its XP, ensure you have at least Service Pack 2.
This hotfix may help XP see high capacity media:
http://support.microsoft.com/kb/934428
but that wouldn't really affect external USB HDD's.

My ipad charges using the usb plug but not using the wall charger. The wall charger works with my wife's ipad2

My ipad2 only charges with the usb plug. It does not charge with the wall charger, My wife's ipad2 does charge with the same wall charger.

Stephen-
Your iPad may have a defective cable. Try your Wife's and see it it makes a difference.
I don't know if iPod and iPhone cables are compatible with iPad, but could you have switched by accident?
Fred

Data recovery from Hard Drive using external USB adaptor

Hi all,
Satellite L655D-S5066BN laptop.
My moderboard or processor failed the other day. (Computer power is on, but it would not boot at all, only the fan seems to run at full speed. Other than that, it is totally dead, not even the Toshiba BIOS logo, no hard drive activity at all).
I removed the hard drive and pluged it in an external adaptor and tried to read it from my desktop.
It seems to work fine, as I was able to access it and copy all the pictures and music files.
They were under c:\Pictures and respectively c:\Music directories.
However, when I try to access My Documents forlder I get an error telling me that I don't have credentials to access that directory.
The computer did not have any passoword protecting the User Account, and didn't use any encription software.
Only my daughter was the only user.
Questions:
Is any way to access those folders that seem to be protected?
Would it be worth trying to replace the motherboard / processor ? If so where would I find such a motherboard?
Thank you for your feedback.
Solved!
Go to Solution.

Apparently, I found the solution.
Doing the below procedure I was able to access the files and copy all the content of My Documents.
To resolve this issue, you must turn off Simple File Sharing, and then take ownership of the folder:
Turn off Simple File Sharing:
Click Start, and then click My Computer.
On the Tools menu, click Folder Options, and then click the View tab.
Under Advanced Settings, click to clear the Use simple file sharing (Recommended) check box, and then click OK.
Right-click the folder that you want to take ownership of, and then click Properties.
Click the Security tab, and then click OK on the Security message, if one appears.
Click Advanced, and then click the Owner tab.
In the Name list, click your user name, Administrator if you are logged in as Administrator, or click the Administrators group.
If you want to take ownership of the contents of that folder, click to select the Replace owner on subcontainers and objects check box.
Click OK.
You may receive the following error message, where Folderis the name of the folder that you want to take ownership of:You do not have permission to read the contents of directory Folder. Do you want to replace the directory permissions with permissions granting you Full Control? All permissions will be replaced if you press Yes.
Click Yes.
Click OK, and then reapply the permissions and security settings that you want for the folder and the folder contents.
Disclaimer: Not my idea, but I learned from this page:
http://support.microsoft.com/kb/810881/en-us

Can't use external USB Drive

Hello
I have 500 GB Hitachi usb drive , it was working fine until now, i can see the disk in disk utility, but i can't format it. I tried to repair the partition but it failed, now the partition dissapear but i still can see the disk in disk utility list, when i try to format it, after few minutes i get this:
Disk Erase failed with the error:
Couldn’t open device."
and previously i got this when formatting partition only:
Disk Erase failed with the error:
Couldn’t open device."

For SMART checking, I understand that has been a problem with external drives.
Looks like there may be a combination solution here and here.
Any help from drive manufacturer site?
Have you reformated it before? Some drive mfrs write invisible partitions for Windows.
I had one drive once which I had to reformat as FAT32 and erase before I could reformat as Mac OS Extended.

Windows migration tool using external USB drive

Hi everyone,
My wife is using Windows Vista (BootCamp) on her MacBook now, but she finally decided to use Mac OS (it'll be Mavericks).
I believe that PC and Mac have to be connected via network (or Ethernet cable) to use Apple Windows migration tool, correct?
How can I migrate it in my case? Can I use MS (Windows) backup tool? Does Mac migration tool recognize this Windows backup? I prefer to use Apple migration tool, but any other good suggestions?
Please advise.
Thank you!

You are welcome.
Check that your computer is compatible with Mountain Lion/Mavericks.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information (may be called something else in 10.5).
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If your computer isn’t compatible, you might be able to upgrade to Lion.
Computer Compatibility - Lion                       Lion
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
You will need to get Snow Leopard.         Snow Leopard Purchase
Once you have Snow Leopard, boot off the Snow Leopard DVD, run Disk Utility Repair Disk and Repair Permissions, Then erase the entire hard drive (top one in Disk Utility) formatting it as Mac OS Extended (Journaled). Install Snow Leopard and update using Software Update to 10.6.8. The combo update will shorten the process.
10.6.8 Combo Updater
Then go to the App Store and download Mavericks. I would quit the installer and make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable USB stick to install using this free program.
Bootable USB Flash Drive – Diskmaker X
That should get you to Mavericks.
If you want/need more RAM the 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service.
Crucial
Other World Computing

Using External USB-based MIDI Interface as a synthesizer in QuickTime

The QuickTime 7 says it's possible. Any wonders?

http://www.bulletsandbones.com/GB/GBFAQ.html#midiout
(Let the page FULLY load. The link to your answer is at the top of your screen)

N86: charging using external usb battery

Similar Messages

Maybe you are looking for