N86 firmware upgrade on 3three network??

I have V11.043 and there is still no update for it. Will there ever be an update to V20 firmware, if so when?

I also have 3 / Three (Sweden) and i also have v20.115 on my N86. So i find it strange actually...

Similar Messages

E71 firmware upgrade for A1 network - Nokia unable...

Hi,
Nokia, please make firmware v210 available to product code 0570359.
i have an E71, use it heavily in business and have standardized our company on it and need to upgrade it to v210 firmware, because the v100 is so buggy. i had 7 email interactions with nokia support and a1 support but both point the finger to each other and are of no help. so the last option is to use the forum, before i feel forced to switch my company over to the iPhone because of lack of nokia software support and upgrades.
the network provider A1.net says they have accepted firmware 200.21.118 already last year and informed Nokia in December 2008 to release v200 for this product code 0570359. A1 even says they have reconfirmed now again that the acceptance of the firmware has reached nokias support team. but when I check the nokia updater and the nokia website, it still says my firmware v100 is the latest. I know that even firmware v210 exists, know the list of fixed issues, so I actually want that one.
Is there anyone out there to help with this mess and help nokia from loosing even more business users over to the iPhone?
Bernd G.

first of all, it isnt Nokias fault. once firmware is released, they do their very best to roll it out and usually achieve this in a few eeks to most regions for their generic product codes (i.e. firmware that is not operator-branded). in your case, there is some kind of miscommunication between your operator (A1) and Nokia, that has resulted in the delay of firmware released for your particular product code. Nokia simply provide the firmware to A1, who then decide whether to actually release it or not with their logos and whatnot all over it (i.e. operator customisation) or if they do not, they will not release the firmware to the users. so all you can do is haggle A1 about it and hope they hurry up and release the firmware.
another option is to ask the A1 guys to sign a release so that you can take your phone to your local Nokia Care Centre and have it flashed with generic firmware. although this is often unlikely to happen as customer service for operators usually do not know what users are talking about when you request this, or are too stubborn/lazy to allow it to happen. but nevertheless, you can try anyway and maybe something good can come out of all this.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

After the firmware upgrade last week, the local WIFI networks pop up when I turn on my phone, I have WIFI turned off, how do I turn off the pop up?

After the firmware upgrade last week, the local WIFI networks pop up when I turn on my phone, I have WIFI turned off, how do I turn off the pop up?

What OS X version are you using?
Can you take a screenshot of the pop-up notification?
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse button. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
If you want to attach a screenshot to a response here, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the window the cursor is on.
⌘ Shift 3 captures the entire screen.

Firmware upgrade for treo 650 on orange network

i recently bought a old treo 650 on the orange network the problem i have is when i go to downloads it says establishing connection then after a while it just resets i dont know if a firmware upgrade would solve this problem the firmware version i have is 01.21 and the software im running is treo650-1.09-ouk is there any updates to either of these and if so where can i get them thank you in advance
gerry
Post relates to: Treo 650 (Cingular)

taoryu, Welcome to the discussion area!
First of all how do you post a new topic on Apple Discussions.
It' very simple:
You go to the Apple.com > Support > Discussions > Mac OS X v10.5 Leopard > Mail and Address Book discussion area.
Click on the link titled "Post New Topic".
I have some friends who have prying eyes. I have some valuable information come through apple mail. They are not on the computer that often, so I'd rather NOT make a separate user account, but for the few times they are, I don't want Apple Mail so easy to access. Is there a way of securing the information like a password. EVERY email application I've seen has this option, Apple Mail must have something similar. Any ideas???
You already know the answer. Create a separate OS X user account and force them to log into that.

Firmware upgrade, then lost

Hi,
Quickly following automatic firmware upgrade on 1 week old Time capsule, network is now lost. Airport set up utility can't find Time Machine .. others experience the same problem? TM feels hot .. perhaps overheated due to firmware upgrade. Solutions welcome.

Your computer came with OS 9.0.4 installed. OS9.1 is required for Classic so is handy to have, and apparently your firmware installer requires 9.2.1 You can use free updaters to update to any later OS9 version from any earlier one.
I don't see any option but to obtain a used copy of OS9. Make sure you get the gold full retail version rather than a machine specific version since the latter will only work in those computers for which they were designed. You can get away with a machine specific version as long as it exactly corresponds to the model and build of yours, but that is often hard to confirm until too late in the purchase.
Note that any drive you want to use with OS9 either for purposes of installing OS9 or for running software will have to have OS9 drivers present on it. These are installed when you format a drive and cannot be installed later without reformatting the drive (and losing everything on it). If your computer still has its original drive then those will likely still be on there unless you reformatted the drive with OSX and did not select the keep OS9 drivers option (there's no harm in doing so and it saves a lot of trouble for doing exactly what you are trying to do). You can can have a drive present that doesn't have the drivers but it simply won't be seen by OS9.
Disconnect all third party hardware (including PCI cards) when updating the firmware.
Message was edited by: Limnos

Firmware Upgrade now no file sharing

I recently installed a firmware upgrade on my E3000 to firmware version 1.0.04.build 6. Since the upgrade I am unable to see any of my files on my network computer which is running windows 7. Before everything was fine and I could stream to my dvd players and dish receivers. I've tried everything I can think of to fix this problem. Any help would be greatly appreciated.
Thanks in advance.

Hi Mr. Bernard,
Thank you for your question.
However, the Small Business Support Community is limited to Cisco Small Business Products and the E3000 is not a Cisco Small Business Product.
Your question below relates to a Cisco Consumer Product which our community would not be able to help you with.
The best area for you to post your question would be at the Linksys by Cisco community: http://homecommunity.cisco.com/community.
Regards,
Diego Rodriguez
Cisco Small Business Community Engineer

Firmware upgrade times out (BEFW11S4 v4)

Hi, my firmware upgrade times out everytime and i've read that the only way to get past this is by flash-upgrading the router through this web address ftp.linksys.com/pub/network but the link doesn't work for me and says '550 failed to change directory'. Is there another link i can try or another solution?
Previous thread: http://forums.linksysbycisco.com/linksys/board/message?board.id=Wireless_Routers&thread.id=122275

Download Firmware 314 KB...
Download TFTP Utility...
After downloading the Firmware rename the file(like - befw11s4)...
Follow these steps to upgrade the firmware on the device : -
Double click the TFTP.exe file and click run.
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Firmware Upgrade EA2700

I have a Cisco Linksys EA2700 model.
i'm looking on if the firmware upgrade is a critical security upgrade, and if so, which download to i pick?
http://support.linksys.com/en-us/support/routers/EA2700
my current firmware is : Firmware Version: 1.0.14
Normaly i don't like to consider touching the firmware of my $100 electronics, however today i found out the hard way that my router may be connecting to another in the neighborhood. I typo'ed a URL and a neighbors Linksys router came up (i recognized immediately it wasn't mine)
wireless settings:
Network mode: Mixed Mode (at the b/g/n option)
Security Mode: WPA2/WPA (what ever that is)
Channel set to auto 20mhz 40mhz
(windows 7 FFox browser interface)

Feel free to skip an upgrade if your router works fine. However, if a router is performing sluggishly, freezing unexpectedly or experiencing dropped connections, firmware upgrade often supplies a quick fix.

Firmware Upgrade causes severe slowness and Hangs

Has anyone else encountered this problem? I did do the firmware upgrade, and that caused slowness in responsiveness (followed immediately by that spinning wheel). In some cases, it completely hangs. At this time, I also tried to VNC into it, and it wasn't listening. It looks like GUI and network connectivity got hosed. This happens at least 10 times today.
Any suggestions?

spingineer,
I haven't seen the firmware update (done 2x) alone cause the problems that you're mentioning. In fact, I didn't notice a thing after running it. I DID notice issues when I ran all the updates (machine fresh out of the box and then everything at once). You machine shouldn't be any slower. Make sure you have enough free space on your drive.
The obvious, and often underused, diagnostic tool is to create a new user account and see if the issues persist there. If not, then look to what's running in your login items and your applications. You may just need to repair permissions, but sometimes it helps to verify or repair the disk.
As to the network connectivity. I'd say it's basically a given that a lot of minis aren't good citizens.
What I see is contention. It's like the machine thinks 'oh, someone else is using the connection so I'll back off a bit then try again', even if nothing else is on at all. It could be partially hardware, there are changes in the machines; but it might be something that can be solved w/ modifications to the stack. It's almost like a feedback loop. The more you use the connection the more it thinks it is competing w/ other machines for access and the slower it becomes. Try the usual, zap the pram, repair permissions, etc. There's a good link if you use search to a tutorial that may help you w/ some network connectivity issues on the mini. (moving out system configuration, promoting your primary connection to the top, using the assistant, rebooting and zapping the pram).
As easy as it seems to look at the firmware as the source of the problems, I haven't seen that as the foundation issue for either of the difficulties you are experiencing with your machine.
Hopefully a few simple resets and permission repairs etc will remedy the issue.
Good Luck,
-j

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

N80 firmware upgrades (how?)

Hello,
There has been some discussion here about the N80 firmware. My N80 is orange and suffers from a few issues. Firstly the web browser is pretty much useless for me, out of memory errors on almost every page. Relatively frequent out of memory errors in Gallery whilst attempting to play a video taken with the camera. Snakes is not playable it crashes out as soon as you actually try to start the game.
I'm wondering how firmware upgrades are peformed with a network like orange? I presume Nokia service centres wouldn't do this because of the altered firmware for the network.
I'm in the UK if it makes a difference.
Thanks,
Richard

Yep, but it's a pain to do as you have to keep backing up on the PC every time you get a new contact.
Is that an N95 in your pocket or are you just pleased to see me?!?
Life's too important to take seriously.
Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
I'm a 26 year old boy BTW

Air Port firmware upgrade

I did a software upgrade yesterday having read that it solves some serious security problems, and in the process I also got a firmware upgrade for the AirPort Extreme WIFI card in my MBP.
After the re-boot, my Mac was trying to connect to the 802.11n interface on my Air Port Extreme! This was totally unexpected since I have an older MBP without the 802.11n support - could the firmware upgrade have added it?
Wireless Card Type: AirPort Extreme (0x168C, 0x86)
Wireless Card Locale: USA
Wireless Card Firmware Version: 1.3.4
Current Wireless Network: wireless network not available
A more general question is - Where do I find details of each of the software/firmware upgrades and what they include - similar to Micro$oft's KB articles?
Walt

There was a thread here a few months ago - I can't find it now - that explained that Apple, in the newer versions of the MacBook Pro, upgraded the AirPort Extreme hardware. the way you could tell the difference between the "old" and "new" hardware was the numbers in parentheses (0x168C, 0x86) following the name. I don't remember which was what, and I can't find the thread, just that mine was NOT the "new" version that was upgraded to 802.11n.
That's why I was excited when the MacBook Pro started to try to authenticate to the 802.11n connection. I didn't have time to investigate further, and won't now for a couple of days, but when I learn more I'll report back here when I do.
I'm guessing from the numbers, that your Mac Mini has the same AirPort hardware, but don't take that as fact
Walt

E71 Firmware Upgrade to 110.07.127 + WLAN Connecti...

I have a E71 (RM 346) (15 Days Old - Just Purchased it)and I have updated my firmware to Version 110.07.127 last night.
I have following problesm:
1. Even When I am standing next to the Wifi Access Point the E71 will say that there is no WLAN Available. (However while doing the SCAN, my laptop which uses the same WLAN Network works, fine.
2. After the upgrade of the firmware - I am unable to use the GPRS/EDGE from my operation - as I have unlimited data plan.
I HAVE DONE A COMPLETE FACTORY Reset as well - but nothing helps. This problem was NOT there before the Firmware Upgrade.
Any Help will be greatly appreciated.
Thanks -

30-Dec-2008 03:35 PM
cynnabon wrote:
yeah, it didn't work..
any solution there please tell me
i'm kinda tired of my nokia e71
I believe the only solution would be to downgrade to the previous firmware and wait till new one will come.
Strange, no replies from Nokia people at all. Looks like they don't care about this forum...
Can anybody comment is that confirmed problem and does Nokia work on it or not?

Firmware upgrade for Three's E71?

I see there are several generic firmware upgrades around. My E71 was supplied by Three and reports:
100.07.76 08-06-2008
RM-346 E71-1 241.02
I believe upgrades should be authorised by the network. Is there a Three upgrade? Nokia's upgrade software says I have the latest version. Would the upgrader know about Three's upgrades?
Thanks
100.07.76 08-06-2008
RM-346 E71-1 241.02
Three UK network

When I talked to a Three customer service advisor, he told me you could only send email through Three's server, Hotmail, Yahoo! and MS Exchange. Having tested 4-5 mailers, I was about to report back that you can indeed send email through Gmail (and possibly others as well), bypassing Three's restrictions. Fortunately, Gmail now allows sending email through their smtp server using the From address of your choice (after registration and verification) -- until a few months ago, they automatically replaced the From address with your gmail address, which made the service useless for many of us.
In my experience, no serious ISP blocks port 25, quite rightly too. Three cannot know whether the remote smtp server you are trying to connect to implements authentication -- it is the responsibility of the remote smtp server admin to handle spam injections, by not offering open relaying. Three forcing users to send through its own smtp server messes up various things -- eg if you choose to occasionally connect through wifi or while roaming you would have to change the mailer's setup. Even if your ISP's server supports encryption, you are forced to send unencrypted email through Three. You can't make the most of IMAP setups ie having sent messages automatically stored in the Sent folder of your ISP's server. Three replaces your From address with your Three address as your messages go through its smtp server.
It is clear that all this is Three's idea of making money. If this kind of unacceptable restriction was really designed to block spam, they should (a) block all relevant ports, not just 25 (b) make sending email through Three's smtp server free, not charge £2.50 for three messages (c) not replace your From address with your Three address automatically and (d) make all this clear in the terms and conditions.When I brought (d) to their attention, they denied it but when I asked them to, they failed to point out where this restriction or the hidden charge is explained. Since then, I checked the T&Cs repeatedly and I cannot locate any mention. Even if there is one, the fact that I have been unable to locate it after repeated and targetted attempts says something. Which is why I consider the contract and the T&Cs null and void, and I will be reporting them to ASA and Trading Standards. So much for a company that claims the moral highground by advertising its transparency, leading public campaigns for cheaper calls etc.
BTW, I don't have any problems with their coverage.
100.07.76 08-06-2008
RM-346 E71-1 241.02
Three UK network

E90 Firmware upgrade

I have downloaded and installed the Software Updater. However, while running it, it wanted to download a 73mb firmware upgrade. My problem is that because I have a slow connection, 73mb can take up to 3 days to download so I had to cancel it.
Is it therefore possible to download that upgrade piecemeal (using GetRight) and run locally instead of being connected 24/7 to the Internet?
Regards.

Your options are:
- go to a friend, relative, colleague, university, etc., where a higher speed network connection is available, and update there
- go or send the phone to your nearest Nokia authorized repair/service center and ask them to do the updating for you
- get a faster internet connection at home
- live without updating the firmware until one of the above options become viable for you

N86 firmware upgrade on 3three network??

Similar Messages

Maybe you are looking for