N86 - Flashing message symbol?

I've recently got the N86 and the message envelope symbol has been flashing even though I have no messages in my inbox, outbox, sent items etc? It's starting to annoy me lol. Any suggestions? Thanks
Solved!
Go to Solution.

I have this problem too. Where do I find my Sim Messages. I got to Messaging > Reports > Options, and all I have are three options, show all open applications, help and exit.

Similar Messages

6210 navigator flashing message symbol

just bought a new 6210 navigator and since start up the little envelope symbol flashes in top right corner .i have no messages in any box...can't find anything in manaul..any ideas
Solved!
Go to Solution.

This question has been asked and answered many times recently.
All you need to do is:
Menu > Messaging > Options > Sim Messages
Delete all messages that you see on that screen.

5800 - Flashing message symbol - what does it mean

Just purchased a new 5800 - the envelope symbol in the top of the screen display is flashing.
What does this mean ?
Solved!
Go to Solution.

how can i let both contact bars and short cut bars appear in the home screen, see attach pix, pix.
Attachments:
home screen 5800-1.jpg ‏20 KB
home screen 5800.jpg ‏18 KB

N97 Message Symbol flashing

Hi
I have only had my N97 1 week and I am really pleased with it in the main.
The message symbol is flashing all of the time. I have seen this on other nokia phones and it usually indicates that the inbox is full. However I have tried empying the inbox and it makes no difference. How do i get rid of the flashing
Any ideas ???

it is probably your sim messages that need to be erased, you can do that by going to :
Menu > Messaging > Options > Sim Messages
delete all sim messages and your issue should be solved
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

N95 Flashing message question

The message symbol on N95 has just begun to flash. I have cleared all my data including the data in SIM message and it still is flashing and won't let me send or recieve messages. Any ideas....thanks

do you have your data backed up and/or synced with outlook or something like that?
when you pushed the red button, be sure you pushed it for at least 3-5 seconds.
do you have a copy of all the sis files for your applications and thier keys?
if you cant get it working you may have to reflash your device.
before you do, try a *#7380# to reset your settings.
if that doesnt work, try reinstalling your entire OS with nokia software updater. it would be easier to do a *#7370# but by using NSU it will actually download and install a fresh copy ensuring you get a good cophy on your device.

Help with flashing message envelope in the home sc...

Hi all
I was hoping if someone could help with the flashing message envelope in the home screen (next the the key lock, blue tooth, car kit symbols., which will no go away...Just keeps flashing
I have checked that I have no message in any of my inboxes, out boxes..ect
I have set-up email, sms etc. and cleares all boxes
I have tried a reinstall to factory original setup
Any ideas
Solved!
Go to Solution.

What do you mean by "repeats every few hours"? Does the flashing message icon pop up all of a sudden, without receiving any messages? Sometimes it happens that messages that are received as many parts will be read by you before all of them have been correctly received. So, as and when a new chunk arrives, you will see this icon even though you had 'read' the message.
If you try the method described in the above post, you will not have any messages in your SIM, and I assume you have no unread messages in your phone either.
I would suggest you to change the Memory in use to Memory card (Messaging -> Options -> Settings -> Other -> Memory in use) temporarily, see if you have any unread messages there, clear everything, and then revert it back to Phone Memory.
If it doesn't work, try a factory reset (*#7780#). This will reset your messaging settings also.
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

How can I keep just the large fox on my homepage? The flashing message about the buttons is a little too much!!

I was at least able to clear the new flashing message about simplifying buttons by clicking back to home or refreshing the page to get the stationary fox wrapped around the world back, now it will not do it. I have a medical condition that sometimes is aggravated when there is a flashing screen. Please help...
Thank-you & have a nice day! :)

If you prefer not to see snippets on the about:home page then you can set the browser.aboutHomeSnippets.updateUrl pref to an empty string on the about:config page.
Delete the storage\moz-safe-about+home folder in the Firefox profile folder with Firefox closed to remove snippets stored in IndexedDB and make Firefox use a default set.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
You can reset the browser.aboutHomeSnippets.updateUrl pref to the default value to re-enable the snippets.

My iPhone 4 flashing Apple Symbol followed by low battery sign.

Hi All,
My 2 years old iPhone 4 fell down in water.I have taken my phone to a local techi to dry water inside.They said they cleaned it well and there is no water inside but my phone is not reacting, they said it's dead
I got my phone back, soon after that I realized that My iPhone is flashing Apple Symbol followed by low battery sign.I tried some stuff by browsing in the internet and finally got a screen with iTunes and charger plug Symbols.Now iTunes is able to detect my devide sometimes and I am trying to restore iPhone by downloading sofware from apple restore server and I could't complete the operation becasue of many errors I am facing (Ex:An error throwed very first time redirected to this link http://support.apple.com/kb/ts4451, other error is iPhone software can't be downloaded becasue there is a problem with your network but I am having working internet in this case).
What I wanted to know is is phone really dead..?? If that is the case, how I am able to see all the screens and how iTunes has detected my iPhone to restore..?
Taking my iPhone to an authorized apple service center does really works in this case..????
Thank you,
Srinivas Kandukuri.

Water and electronics do not mix. You have probably fried the circuit boards. Get a new phone.

Startup problem - "truncated or malformed library" flashing message

I was updating the software on my iBook G4 (hadnt done so in a while so it was about 11 items) and i think the battery ran out or something as when i next looked the screen was black as if it had shut down.
Now i cant seem to get it to startup again. The chime is heard then the grey screen with the logo appears but after that the screen goes black with a flashing message:
dyld: -sh truncated or malformed library: /user/lib/libncurses.5.dylib (file is empty)
underneath that is the date and time (still changing), followed by:
init: single user shell terminated, restarting
...and its just stuck here. sorry i im not too familiar about what to do in this situation. thanks in advance.
ibook G4 Mac OS X (10.3.4)

Yes, you should be able to use the Install Disk for your other iBook, but you may have to install it in a particular way. However, I would suggest you trying to reset your NVRAM on the broken iBook. Follow these directions (from http://docs.info.apple.com/article.html?artnum=106482) to do this:
1. Start up into Open Firmware by pressing and holding the Command-Option-O-F key combination during startup.
2. At the Open Firmware prompt, type: reset-nvram
3. Press Return.
4. When prompted for your password, enter it and press the Return key. It responds OK.
5. At the Open Firmware prompt, type: reset-all
6. Press Return.
The iBook should reboot and maybe it will boot Mac OS X. If not, you can do two things to try installing Mac OS X from your the Install Media for the other iBook.
1) Try booting the broken iBook from the Install Disk by holding down the C key (until you see Mac OS X begin to boot) after turning the iBook on.
2) If the Installer reports that your iBook isn't supported do this:
a) Eject the Install Disk by holding down the mouse button while the iBook is booting.
b) Put the broken iBook into Firewire Target Disk Mode and connect it to the other iBook. Turn on the other iBook and boot from the Install Disk. Choose to install Mac OS X on the drive in the broken iBook (which will appear as a Firewire hard drive in the Installer). Installing from a system specific Install Disk doesn't always work, but it's worth a shot. Good luck!
PowerMac G5 Mac OS X (10.4.6) 1GB RAM, nvidia 6800 ultra, Apple 30" Cinema Display

Safari 7.0.6 crashes: Dyld Error Message: Symbol Not Found

After I did the latest MacOS update (10.9.5) Safari (7.0.6) no longer runs. I repaired permissions and also rebooted in safe mode so I could potentially remove any spurious plug-ins, but the last time I did this was with MaxOS 6 so I have no idea where to look in the current version.
The error message that pops up is:
Process:         Safari [1279]
Path:            /Applications/Safari.app/Contents/MacOS/Safari
Identifier:      com.apple.Safari
Version:         ???
Build Info:      WebBrowser-7537085010017001~4
Code Type:       X86-64 (Native)
Parent Process: launchd [194]
Responsible:     Safari [1279]
User ID:         505
Date/Time:       2014-09-26 08:16:17.066 +1000
OS Version:      Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 84ADDFB5-CAD4-0759-3667-8E0B47E8E995
Sleep/Wake UUID: 51EC656E-25AB-4167-810D-D7A644340E28
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries, ignoring DYLD_* env vars
Dyld Error Message:
Symbol not found: __ZN3JSC10JSDataView6s_infoE
Referenced from: /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
in /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
(insert a 'shed load' of other lines of log data which you probably don't need, right?)

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Lit up screen draining battery after flash message

I am using 3GS model. After my last upgrade to 4.3.3 after recieving flash messages my phone's screen lights up again after few seconds, and remains like that. It responds only after pressing home button after that. so if it is at night (during sleep), it remains on throughout the night & it drains my battery. please tell the solution to correct this error.

Nothing obvious here, but better get rid of that remnant of CleanMyMac2. Also check if all software with kernel extensions, launch agents and launch daemons is still necessary and up to date (if not uninstall or update).

Just turned on my MacBook and it has a flashing file symbol...Help?

Switched on the MacBook and it has a flashing file symbol with a Question mark. What does this mean the user manual was rubbish...

Welcome to Apple Support Communities
It means that the MacBook couldn't detect any bootable partition to start from. It usually means that the hard disk is damaged, but it could also mean that your computer has forgotten the startup disk.
First, turn off your MacBook and turn it on holding the Option (Alt) key, so you will see all bootable partitions in the display. If you can see the OS X partition, select it, and after starting, open System Preferences > Startup Disk, and select the OS X partition.
If it doesn't work, it probably means that the hard drive is damaged, but we should check it. To do it, hold Command and R keys while your computer is starting to start in Recovery HD and open Disk Utility. Then, choose "Macintosh HD" in the sidebar and repair the drive. If it couldn't be repaired, you need a new hard disk

Putting Hyperlinks into Flash Button Symbols

Hi there,
I just wanted to know how to put Hyperlinks into Flash Button
symbols
For example;
I have a button which is named Home, and i have the UP, OVER,
DOWN and HIT stages and wanted to put a
Hyperlink to lets say Google so www.google.com.au and wanted
it to open in the same page not a new tab.
And if possible would like to know how to put multiple
Buttons as one Flash File and have them all Hyperlinked to
DIFFERENT Pages.
I know very little Actionscript, but know what it is and
other basics on it.
I am using Adobe CS3 Flash 9 and would prefer a simple
answer, Thank You

Hi,
There is a video tutorial for this on my website below.
Hope this helps.
Thanks
Alan

Using Flash 8 Symbols in Flex

Hi,
I am creating some custom controls whose interface is a bit
complicated (and hence would be far too much of an effort to create
using graphics.draw methods). So I tried building the user
interface as Flash 8 symbols. What I do is,
- Create the symbols in Flash 8
- Embed them in my Custom Control class
- Create instances of the embedded class as a SpriteAsset
object
- Add it to the childrens list of my control class so that it
is drawn
So far, so good.
The slight issue is that I also need to allow the user to
modify the custom control interface (line color, fill color etc.)
and I cant figure out how I can modify these properties on the
Flash Symbol through the SpriteAsset class.
Any ideas....

The short answer is you can't do that. Flash 8 is
ActionScript 2 while Flex 2 is ActionScript 3. When ActionScript 2
is loaded into the Flash Player it is put into a separate virtual
machine than the ActionScript 3 code. This is how the Flash Player
maintains backward compatability. There isn't a way for the AS3
code to reach in and tinker with the AS2 code and vice-versa.
But all is not lost. You can use LocalConnection to
communicate between the two virtual machines. Check my blog,
there's an article about doing that:
Using
ActionScript 2 SWFs with Flex 2

Flash Message

What is the difference between a flash message
and an ordinary text message (sms) in a Nokia
3120 Classic?
What purpose does a flash message serve?

I have just purchased the 3120 Classic. I can't find it on this site to download the program to my computer.
Do I need this programme to upload photos and video's to my computer?
What is SMS. Do you have to go online to use this?
Do I just use Bluetooth to transfer data?
I can't work out how to take photos and upload them onto the screen to send to anyone?
The book is hopeless and would like to see an online display which shows you how to do everything. There is probably one on my phone, but the book is so useless it doesn't explain anything very well. There is "if you can't do this, try this?
One very frustrated Kiwi!!!!!!!
My boyfriend has just purchased a Nokia 1208, the book is less than useless and can't find any information on the screen either.

N86 - Flashing message symbol?

Similar Messages

Maybe you are looking for