N86 gallery, section captured, problem no pics

hi,
can anyone help me out? i have some problems with the gallery of my phone. i know the problems with the pictures there lost  in the gallery view and could solve them. deleting the thumbnail databases in:
Private > 101f8857 > Cache > E Drive "al files" and
             > 101ffc31  > "glxmdstn"
this worked so far. the gallery refresh the index and shows the complete pictures in the all section again.
and now i would like to know how i could get my captured pics back in the section "captured"
i have several different pics located in the image folder of my phone. downloaded and copied, ones and so on. this pics can i reach with the "all" section in the gallery. but this ones i've taken with the phone camera i would like to reach over the sections "captured" and "month". how could i induce the system to scan and include my captured pictures again. the folder structure is the same as before.
any suggestions, any folders or databases that i have to delete...
thks for any advice

hi.. i have the same problem ... my all caputered pics and videos lost from caputerd and months folder.. kindly help me out from this problem........
plz mail me the solution at [email protected]

Similar Messages

  • N86 Gallery and Charing problems

    Hi guys, just a few issues hopefully someone can help (tried to search but it wont work for me)
    1) phone occasionally thinks its charging when it is not plugged in, very annoying, have to restart phone. any ideas? oh and also is there away to turn of that annoying little charging light? ive resorted to covering it with a 1mm square of black electrical tape because its annoying if you sleep next to phone!
    2) I had about 600ish photos in my gallery, the other day that dropped to 0, the photos are still there but are not in gallery, after about 5 restarts there are now 50 images in the gallery some of which were taken on the night in question and some weeks before. very annoying as i dont want to look through images on file browser, any ideas?
    any help is much appreciated Cheers guys!!

    sorry for late reply, but wouldnt that negate the issue, i want my photos available, hell on my old N95 I could drop photos in and they would appear in the Gallery! oh and yes the images are still there it just seems like some coruption , e.g there is a photo (cant remember its name so I will call it Photo1). that i navigated to via file browser, however in the gallery there is a differnt photo (photo2) that is called Photo1. any other ideas?

  • MIGO-Capturing problem-Item is not available for Excise invoice,deselect th

    Hi Gurus
    while doing MIGO and part 1 posting am getting following error
    MIGO-Capturing problem-Item is not available for Excise invoice,deselect the item
    kindly help in this
    Maruthi

    hi
    check all settings in J1ID
    or
    in po did u got ur all values correctly for excise cess and hcess
    if yes then check ur vendor excise details in j1id
    if above setting are done properly then check ur CIN setting in spro>log gen>tax on goods movement >india>account determination >specify excise acct as per transaction/specify G/L acct as per transaction
    regards
    kunal

  • Capturing Problem with Sony TRV330

    Capturing problem with Sony digital8 trv330.
    I recently purchased the above camcorder from eBay for capturing old 8mm/Hi8 tapes for editing purpose. The camcorder set to A/V -> DV OUT connected with Firewire to my Power G4 and the Easy Setup was DV-NTSC. The playback on the capture window looks OK except there were no timecode in the Timecode Duration Field and the Current Timecode Field (both shown 00:00:00:00) during playback but there was timedoce in the camcorder viewfinder. When I click the Capture Now button, the capturing window show up with message “waiting for timecode ….”. I have to click “esc” to stop the capturing operation. I trash the Preferences and Ran the Disk Utility without success. I also tried the Easy Setup with DV-NTSC DV Converter as well as DV-NTSC 32Khz, nothing work.
    My set up is: Mac Power G4 version 10.5.5/ F.C.E. 4.0.1/ QT7.5.5/ Startup 160 GB-89 GB available/ Scratch 350GB-277GB available. Folks, I need help. Thanks everybody.

    Hi, I have a similar problem. I am trying to digitize my 8mm tapes (via firewire) using final cut express (4.0.1). Using easy setup I use DV-NTSC DV Converter and do capture now. I transfer the entire tape but notice the audio is out of synch with the video. This problem gets worse throughout the transfer process. When I use the esc to complete the transfer I get the error " The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape....." So after searching around it is recommended I change the audio sample rate to 32 kHz option. However, when I do this using easy setup and picking DV-NTSC 32kHz I cannot use capture now because I have no timecode and so the window comes up with the message "waiting for timecode". Since there is no timecode this option does not work. Any suggestions? Thanks, Dan

  • Audio Capture problem in Mac OS X 10.7.5 in Mac mini(in Silverlight)

    I got a mac mini and upgrade Mac OS X 10.6.x --> 10.7.5.
    However do not hearing the audio in Webpage using Silverlight.(10.6. version doing well)
    So, I found the solve this problem, that is a audio capture problem.( My device does not supported Stereo audio data).
    this is the source in audio capture using Silverlight code.
      CaptureSource source = new CaptureSource()
                            AudioCaptureDevice = CaptureDeviceConfiguration.GetDefaultAudioCaptureDevice()
                        try
                            foreach (AudioFormat af in source.AudioCaptureDevice.SupportedFormats)
                                if (af.Channels == 1 && af.BitsPerSample == 16 && af.SamplesPerSecond == 8000)
                                    source.AudioCaptureDevice.DesiredFormat = af;
                                    break;
    af.Channels is always af.Channel == 2(Stereo)
    --- the question is
    How can I caputure audio channel mono?
    If couldn`t, how can I transfered audio capture data stereo to mono?
    Please answer the question as soon as possible ^^

    Mavericks is a 5.3 GB file, it takes awhile to download based on the speed of your internet account.

  • Capture Problems with Vista

    While this problem is not specific to PE4, I am hoping someone will be able to help me.
    I recently purchaed a Dell XPS desktop for video editing. I am unable to capture from my SONY HDRHC7 camcorder. The new computer runs on Vista Home Premium; my old computer (never had any capture problems before) runs on XP. According to Dell, Adobe, and SONY websites, there are no additional drivers that I need to capture video.
    Has anyone had similar problems? And, if so do you have any advice? Thank you.

    Hi Butch,
    Here is your solution from the Read Me:
    Windows Vista Compatibility
    Windows Vista is a brand new operating system from Microsoft and has not been available in its final form long enough for Adobe to fully certify Lightroom for use on Vista. Adobe is working hard to finalize support or Vista as quickly as possible and will deliver appropriate software updates over the launch period. Lightroom 1.0 will install and run on Windows Vista but Adobe cannot guarantee the quality of the software experience until final testing is completed. Known issues for using Lightroom 1.0 on the Vista operating system are listed below:
    Lightroom CD and DVD burning tools will not currently function
    Importing files directly from a Camera or Card Reader may not function properly. Please
    copy files to a local hard drive via the operating system before importing the files into
    Lightroom
    This may not be the answer you wanted but until the next release.........

  • Cannon GL2 - FCE 2 and iMovie Capture Problems

    Hello Hello
    I've read here that folks are having a tough time capturing with thier Cannon GL2. The device goes from NO problem to 'Can't intiate a capture because the device looses connectivity.
    I tried to find a common denominator to this problem, and it seems this post regarding Quick Time Files can help? Yes?
    Is this the main problem?
    Anyway I'm also having connectivity issues with both iMovie 6 HD, and FCE 2
    Just wondering if I should also follow the directions on this post and have my capture problems solved?
    http://docs.info.apple.com/article.html?artnum=301852
    BTW - I currently have Quicktime 7.0.4
    Thanx

    Hi Tom - Thanx for your reply!
    Well, yes I have (as my profile indicates), a G5 1.8 Gig, currently with an external Lacie HD plugged in. I also have a Cannon GL2.
    But before I go any further, and before I try those directions for cleansing certain Quick Time 7 Library Files, I think I figured out the dilemma.
    This problem of GL2 recognition (from what I've read), is common for folks who have similar equipment, and a similar set-up as mine:
    It seems (as I've also read here), that my G5 does NOT like 2 devices which require the same connection speed plugged into the 1394 Firewire Port at the same time - trying to share the same bus.
    I confirmed this by disconnecting the Lacie FIRST - then booting back up - and WALLAH - the GL2 was certainly receoginzed both in iMovie 6 HD, and FCE 2!
    I also further resolved the issue by buying a 'cheaper' Cannon Camcorder - the ZR500.
    Now I can actually share the Lacie HD in the Fire Wire Port with this slower connection speed camcorder. And a further benefit is giving my GL2 a rest when it comes to 'capture only'
    Does all this make sense?
    If so, perhaps I've already discovered stuff that other folks already know ...
    Thanx
    Mike

  • Premiere Pro CS5.5 Batch Capture Problems

    Hi,
    I'm sorry for the repost, but the older questions I can find on this topic won't allow me to reply and they were never answered (last post several months ago).
    I'm having the batch capture problem with Premiere Pro CS5.5. Capture with device control works great when single capturing. When I log clips and attempt to batch capture, though, I get the "capture failed: device not found" error in my capture log. I have checked through the FAQ and the complete premiere manual on batch capturing. I've set my device (still using a Canon XL1) and even checked the video size...it matches that of my project (someone on another forum mentioned that this could be an issue). I have had no luck.
    Could anyone tell me if this issue has been resolved, or redirect me to a resolution?
    Thanks in advance for any help!!
    Steve

    I have encountered this problem if the current tape position is beyond the last recorded point when you start the batch capture or if any "OUT" points are beyond the last recorded position or if the capture spans any unrecorded portions of the tape. I always thought it was my camera but maybe it is a PPro issue.

  • ZIU timecode/capture problems

    This is issue we've been struggling with for a couple months now, originally thinking that it was an FCP version problem. Now we have been running FCP 5.1.2, Tiger, and QT all at their latest versions still no improvment.
    The problem is we shoot a tape with our SONY HDV-Z1U and log the clips in FCP. When we go to batch capture many of about 25% of all these clips have capture problems. Final Cut detects timecode breaks and captures 2,3,4, sometimes 15 versions of these labeling them clip, clip-1, clip-2, etc....
    You can actually see these wierd glitches and jumps on the camera LCD and on the FCP capture window. Sometimes the camera will rewind itself over and over trying to find the proper IN on the tape.
    It seems like someone out there has had to run across this issue because this is such a common camera and such a common task. I'm almost worried that it's a camera problem and I don't even know where I would go to ask about something like that. I have not been albe to find any documentation that this model camera has TC problems.
    Please, help or point me in the right direction it must just add a couple years to my life!!!
    Thanks.

    I have a ZU1 and I occasionally encounter this problem, but it's usually one clip out of say 25 or 30 on a given tape. I'm never sure what causes the problem and if I simply skip the problem clip I can sometimes go back and digitize just that one last clip.
    I do know the ZU1 seems to need plenty of pre-roll in the front of the tape, but I'm assuming that's not the problem. You're using new, high quality tape, correct? Have you tried a simple head cleaning on the ZU1.

  • Is there going to be a Solution for the Capture Problem?

    I've noticed that it is not only me but Final Cut Pro is not capturing video properly, it should not be so hard to capture from my camcorder(PV-DV51), when I hit log and capture the program just quits, after reinstalling, deleting preferences, the Firewire dock is able to see the camera, I can capture with IMovie for crying out loud! so the only question left, is do I have to upgrade Quicktime 7 player to the full version? because I did not find the upgrade in final cut studio package so do I have to purchase separately?
    Thanks for the help

    "The capture problem" is not, AFAIK, striking any number of folks. At least I've not heard of it. If you're running Final Cut Studio 5, there's not a separate serial - it's a gestalt thingie upon install.
    FCP uses QuickTime to do its capturing (iMovie does not). You might try reinstalling QuickTime (don't skip any steps). Go to /Library/Receipts. Trash all QuickTime related .pkg files (Don't worry, you're only deleting receipts so that a full install will take place). Go to http://www.quicktime.com/ and download the latest installer and run it. Reboot.
    post back,
    Patrick

  • FX5900XT-VTD128 capture problem

    Hi,
    I read the many posts about capture problems but did not recognise my issues.
    I just got FX5900XT-VTD128 and I am trying to get it to capture with WinDVD creator (bundled). WinDVD would start but then it would hang without listing any capture device.
    I installed the latest WDM drivers from the nVidia site (2.20_wdm-vivo.exe)
    Device manager list the following devices under sound, video and game controllers:
     - nVidia WDM A/V Crossbar (12-2-2003)
     - nVidia WDM Video Capture (universal)  (12-2-2003)
    The multimedia tab in control panel show the following under "devices"
      under "Video Capture device" -->  -Microsoft WDM Capture
    After reading the posts, I suspected a WDM driver problem so I did the following:
       1- removed both nVidia WDM devices from device manager
       2- removed Microsoft WDM Capture from multimedia devices
       3- removed nVidia WDM drivers with Driver Cleaner
    I rebooted and confirmed that no nVidia WDM devices were present in Device manager and that no WDM capture device were present under multimedia capture devices.
    I re-installed nVidia WDM driver 2.20 and rebooted. Windows plug and play recognised both nVidia WDM devices and installed drivers for it.
    When I checked, both Device manager and Multimedia capture device were back as they were before the driver re-install yet WinDVD still hang when I click "capture" (Window is still alive, I can kill WinDVD manualy but I would then not be able to restart it without first rebooting).
    I tried Flycap and VirtualVCR with no better result, they hang.  
    I am using Win98 SE on a Gygabyte  GA-7N400-l motherboard with AMD Sempron 2400+ CPU and 512MB RAM. I have no other card in the PC.
    I am using nVidia driver 66.94 from the file: "66.94_win9x_english.exe"
    Any insight would be greatly appreciated.

    also refer to this post....5900 Video Capture
    its name is fx900xt capture and got 5 thumbs on the forum title for easy to find....

  • Newly encountered capture problem

    I have a frustrating capture problem that just cropped up in a system that worked close to flawlessly in the past.
    Aluminum G4 powerbook, 10.4.11, 1GB
    FCE 2.0.3
    External hard drive: Mercury Elite Pro FW800 on powerbook FW800 bus
    Camera: Canon ZR45 attached via FW400 on a PCMCIA card FW bus
    In the past (i.e. about a year ago) this system has worked almost flawlessly (i.e. 1 hour captures from tape, no problem)
    In the past few days I have tried to use this system, and everything works fine for 5 minutes (i.e. the camera is recognized, I initiate capture now, it writes a file). Then at 5 minutes, the disk starts making a rhythmic click at about 1/sec and FCE freezes capture. (image frozen on screen). The tape keeps going. If I hit "esc", nothing happens. I get the whirling rainbow of doom, and nothing I can do will allow me to escape. The disk keeps ticking, FCE keeps ignoring the esc. If I attempt force quit and to unmount the disk, I have to keep doing it over and over. FCE even after force quit returns, as does the disk even though in theory, it has been trashed. After a few minutes of continually force quitting FCE and unmounting the disk, things settle down. But none of the captured material is usable ("is not a movie file") in general.
    As I said, this is the same configuration of interfaces, disks, computer and camera that I have used without hitch in the past.
    Oh, I also used the disk utility to check the disk and it says it doesn't need repair.
    This is very frustrating, because it took me about a year of fiddling with different disks and interfaces before I got a system that could reliably capture onto my powerbook, and now it no longer seems to work.
    Does anyone have any insights? Many thanks in advance.

    Thank you for your response. I checked and it is Mac OS Extended. As far as the actual drive manufacturer, I can't figure this out from anything on the case or in the About this Mac info (posted below). It is about 2 years old, and has not been used that much. I guess it depends on what "that much" means. I transfered 18 hours of DV to it over a month period, and then wrote out 18 disks worth of qt files and dvd files to another drive. When I run "verify disk" it says "passed verification".
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    OWC Mercury Elite-AL 1:
    Manufacturer: Other World Computing
    Model: 0x0
    GUID: 0x1D20200920366
    Maximum Speed: Up to 800 Mb/sec
    Connection Speed: Up to 800 Mb/sec
    Sub-units:
    OWC Mercury Elite-AL 1 Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x102
    Product Revision Level: 3.AA
    Sub-units:
    OWC Mercury Elite-AL 1 SBP-LUN:
    Capacity: 465.76 GB
    Removable Media: Yes
    BSD Name: disk2
    OS9 Drivers: Yes
    S.M.A.R.T. status: Not Supported
    Volumes:
    Capture Disk Mercury Elite:
    Capacity: 465.64 GB
    Available: 105.46 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk2s10
    Mount Point: /Volumes/Capture Disk Mercury Elite

  • What is the 'Gallery' section when on an artist?

    What is the 'Gallery' section when on an artist? When I'm on any of my artists it always says 'No gallery is avalible for 'ARTIST NAME'. One what is the 'Gallery'? Two how can I get it?

    If there is a limitation, it would be your carrier's limitation.
    Barry

  • Im having a problem uploading pics to my FB profile page from camera app. they are going into an IOS album instead. this just started feb 12th and i have had my phone since dec of 2012

    im having a problem uploading pics to FB profile page from camera app. they are going into an IOS album instead. this just started feb 12th and i have had my phone since dec of 2012

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • Nokia N86 8MP Photo Album problem

    Hi
    Recently, when I opened the gallery to look at my photos, I found that in the "Captured" section of the gallery it said I had 0 photos, when previously there were around 300. If I try to browse to the pictures using the "Months" feature I also find there are 0 photos. The photos all still exist under the "All" catergory, however they have lost all the album associations they had before, and also a lot of them, had become other photos, in the older photographs kept cropping up again and again in the list of pictures.
    When connected to the PC in mass storage mode the photos were all still there, and the ones which seemed to be duplicates of old photos when viewed on the phone were actually the photo they were supposed to be. Anyway, now when I take a new photo it it goes into the captured section of the gallery, BUT when I try to view the picture all I get is a thumbnail and picture of old pictures taken back in September. Again, on the PC they are the right photos, as they are meant to be.
    This is super annoying, as I cannot view pictures I have taken recently, and most of the old pictures are unviewable as well (since the phone thinks they are duplicates of other photos), and the organisation of the 300 or so previous pictures has been lost, they are not in albums any more. 
    I have found NO helpful support regarding this with some Goolgling, PLEASE can someone help me out here? I am sorry if the description is unclear, but this is an awkward problem to describe. ANY help at all would be appreciated, as I have only just got this phone, and i really like all the features of it but I mainly bought it for tyhe camera and if it won't work I will have to change it for something inferior in functionality, but more reliable in imaging.
    Thanks in advance
    Henry 

    Mine does that sometimes. It is a bug. Take the battery off and restart the phone. The pictures taken won't ever return to the gallery but new ones should go in properly. Yet another infuriating feature. There seems to be an issue with the phone if you close the camera slider with the main slider open. It causes some issue with saving new pictures. It also does it even if you are careful not to do this after so much use. Unless you check after every photo taken that it has gone into the gallery you have no idea it is doing this as the post picture preview appears as normal. I also wonder whether going into messaging with a photo while the camera slider is still open is leading to this bug too.
    It might be better to save all the pics onto the pc and delete every one of them off the phone and see if you can restore them back from the pc.
    Also see if a sd card is any more/less reliable for picture taking storage. 

Maybe you are looking for